Imported Upstream version 4.8.30.NCupstream/4.8.30.NC

1 files changed, 222 insertions, 0 deletions

diff --git a/test/sec001.tcl b/test/sec001.tcl
new file mode 100644
index 00000000..c80a971d
--- /dev/null
+++ b/test/sec001.tcl
@@ -0,0 +1,222 @@
+# See the file LICENSE for redistribution information.
+#
+# Copyright (c) 1999-2009 Oracle.  All rights reserved.
+#
+# $Id$
+#
+# TEST	sec001
+# TEST	Test of security interface
+proc sec001 { } {
+	global errorInfo
+	global errorCode
+	global has_crypto
+	global is_hp_test
+
+	source ./include.tcl
+	# Skip test if release does not support encryption.
+	if { $has_crypto == 0 } {
+		puts "Skipping test sec001 for non-crypto release."
+		return
+	}
+
+	set testfile1 env1.db
+	set testfile2 $testdir/env2.db
+	set subdb1 sub1
+	set subdb2 sub2
+
+	puts "Sec001: Test of basic encryption interface."
+	env_cleanup $testdir
+
+	set passwd1 "passwd1"
+	set passwd1_bad "passwd1_bad"
+	set passwd2 "passwd2"
+	set key "key"
+	set data "data"
+
+	#
+	# This first group tests bad create scenarios and also
+	# tests attempting to use encryption after creating a
+	# non-encrypted env/db to begin with.
+	#
+	set nopass ""
+	puts "\tSec001.a.1: Create db with encryption."
+	set db [berkdb_open -create -encryptaes $passwd1 -btree $testfile2]
+	error_check_good db [is_valid_db $db] TRUE
+	error_check_good dbput [$db put $key $data] 0
+	error_check_good dbclose [$db close] 0
+
+	puts "\tSec001.a.2: Open db without encryption."
+	set stat [catch {berkdb_open_noerr $testfile2} ret]
+	error_check_good db:nocrypto $stat 1
+	error_check_good db:fail [is_substr $ret "no encryption key"] 1
+
+	set ret [berkdb dbremove -encryptaes $passwd1 $testfile2]
+
+	puts "\tSec001.b.1: Create db without encryption or checksum."
+	set db [berkdb_open -create -btree $testfile2]
+	error_check_good db [is_valid_db $db] TRUE
+	error_check_good dbput [$db put $key $data] 0
+	error_check_good dbclose [$db close] 0
+
+	puts "\tSec001.b.2: Open db with encryption."
+	set stat [catch {berkdb_open_noerr -encryptaes $passwd1 $testfile2} ret]
+	error_check_good db:nocrypto $stat 1
+	error_check_good db:fail [is_substr $ret "supplied encryption key"] 1
+
+	set ret [berkdb dbremove $testfile2]
+
+	puts "\tSec001.c.1: Create db with checksum."
+	set db [berkdb_open -create -chksum -btree $testfile2]
+	error_check_good db [is_valid_db $db] TRUE
+	error_check_good dbput [$db put $key $data] 0
+	error_check_good dbclose [$db close] 0
+
+	puts "\tSec001.c.2: Open db with encryption."
+	set stat [catch {berkdb_open_noerr -encryptaes $passwd1 $testfile2} ret]
+	error_check_good db:nocrypto $stat 1
+	error_check_good db:fail [is_substr $ret "supplied encryption key"] 1
+
+	set ret [berkdb dbremove $testfile2]
+
+	puts "\tSec001.d.1: Create subdb with encryption."
+	set db [berkdb_open -create -encryptaes $passwd1 -btree \
+	    $testfile2 $subdb1]
+	error_check_good subdb [is_valid_db $db] TRUE
+	error_check_good dbput [$db put $key $data] 0
+	error_check_good dbclose [$db close] 0
+
+	puts "\tSec001.d.2: Create 2nd subdb without encryption."
+	set stat [catch {berkdb_open_noerr -create -btree \
+	    $testfile2 $subdb2} ret]
+	error_check_good subdb:nocrypto $stat 1
+	error_check_good subdb:fail [is_substr $ret "no encryption key"] 1
+
+	set ret [berkdb dbremove -encryptaes $passwd1 $testfile2]
+
+	puts "\tSec001.e.1: Create subdb without encryption or checksum."
+	set db [berkdb_open -create -btree $testfile2 $subdb1]
+	error_check_good db [is_valid_db $db] TRUE
+	error_check_good dbput [$db put $key $data] 0
+	error_check_good dbclose [$db close] 0
+
+	puts "\tSec001.e.2: Create 2nd subdb with encryption."
+	set stat [catch {berkdb_open_noerr -create -btree -encryptaes $passwd1 \
+	    $testfile2 $subdb2} ret]
+	error_check_good subdb:nocrypto $stat 1
+	error_check_good subdb:fail [is_substr $ret "supplied encryption key"] 1
+
+	env_cleanup $testdir
+
+	puts "\tSec001.f.1: Open env with encryption, empty passwd."
+	set stat [catch {berkdb_env_noerr -create -home $testdir \
+	    -encryptaes $nopass} ret]
+	error_check_good env:nopass $stat 1
+	error_check_good env:fail [is_substr $ret "Empty password"] 1
+
+	puts "\tSec001.f.2: Create without encryption algorithm (DB_ENCRYPT_ANY)."
+	set stat [catch {berkdb_env_noerr -create -home $testdir \
+	    -encryptany $passwd1} ret]
+	error_check_good env:any $stat 1
+	error_check_good env:fail [is_substr $ret "algorithm not supplied"] 1
+
+	puts "\tSec001.f.3: Create without encryption."
+	set env [berkdb_env -create -home $testdir]
+	error_check_good env [is_valid_env $env] TRUE
+
+	# Skip this piece of the test on HP-UX, where we can't
+	# join the env.
+	if { $is_hp_test != 1 } {
+		puts "\tSec001.f.4: Open again with encryption."
+		set stat [catch {berkdb_env_noerr -home $testdir \
+		    -encryptaes $passwd1} ret]
+		error_check_good env:unencrypted $stat 1
+		error_check_good env:fail [is_substr $ret \
+		    "Joining non-encrypted environment"] 1
+	}
+
+	error_check_good envclose [$env close] 0
+
+	env_cleanup $testdir
+
+	#
+	# This second group tests creating and opening a secure env.
+	# We test that others can join successfully, and that other's with
+	# bad/no passwords cannot.  Also test that we cannot use the
+	# db->set_encrypt method when we've already got a secure dbenv.
+	#
+	puts "\tSec001.g.1: Open with encryption."
+	set env [berkdb_env_noerr -create -home $testdir -encryptaes $passwd1]
+	error_check_good env [is_valid_env $env] TRUE
+
+	# We can't open an env twice in HP-UX, so skip the rest.
+	if { $is_hp_test == 1 } {
+		puts "Skipping remainder of test for HP-UX."
+		error_check_good env_close [$env close] 0
+		return
+	}
+
+	puts "\tSec001.g.2: Open again with encryption - same passwd."
+	set env1 [berkdb_env -home $testdir -encryptaes $passwd1]
+	error_check_good env [is_valid_env $env1] TRUE
+	error_check_good envclose [$env1 close] 0
+
+	puts "\tSec001.g.3: Open again with any encryption (DB_ENCRYPT_ANY)."
+	set env1 [berkdb_env -home $testdir -encryptany $passwd1]
+	error_check_good env [is_valid_env $env1] TRUE
+	error_check_good envclose [$env1 close] 0
+
+	puts "\tSec001.g.4: Open with encryption - different length passwd."
+	set stat [catch {berkdb_env_noerr -home $testdir \
+	    -encryptaes $passwd1_bad} ret]
+	error_check_good env:$passwd1_bad $stat 1
+	error_check_good env:fail [is_substr $ret "Invalid password"] 1
+
+	puts "\tSec001.g.5: Open with encryption - different passwd."
+	set stat [catch {berkdb_env_noerr -home $testdir \
+	    -encryptaes $passwd2} ret]
+	error_check_good env:$passwd2 $stat 1
+	error_check_good env:fail [is_substr $ret "Invalid password"] 1
+
+	puts "\tSec001.g.6: Open env without encryption."
+	set stat [catch {berkdb_env_noerr -home $testdir} ret]
+	error_check_good env:$passwd2 $stat 1
+	error_check_good env:fail [is_substr $ret "Encrypted environment"] 1
+
+	puts "\tSec001.g.7: Open database with encryption in env"
+	set stat [catch {berkdb_open_noerr -env $env -btree -create \
+	    -encryptaes $passwd2 $testfile1} ret]
+	error_check_good db:$passwd2 $stat 1
+	error_check_good env:fail [is_substr $ret "method not permitted"] 1
+
+	puts "\tSec001.g.8: Close creating env"
+	error_check_good envclose [$env close] 0
+
+	#
+	# This third group tests opening the env after the original env
+	# handle is closed.  Just to make sure we can reopen it in
+	# the right fashion even if no handles are currently open.
+	#
+	puts "\tSec001.h.1: Reopen without encryption."
+	set stat [catch {berkdb_env_noerr -home $testdir} ret]
+	error_check_good env:noencrypt $stat 1
+	error_check_good env:fail [is_substr $ret "Encrypted environment"] 1
+
+	puts "\tSec001.h.2: Reopen with bad passwd."
+	set stat [catch {berkdb_env_noerr -home $testdir -encryptaes \
+	    $passwd1_bad} ret]
+	error_check_good env:$passwd1_bad $stat 1
+	error_check_good env:fail [is_substr $ret "Invalid password"] 1
+
+	puts "\tSec001.h.3: Reopen with encryption."
+	set env [berkdb_env -create -home $testdir -encryptaes $passwd1]
+	error_check_good env [is_valid_env $env] TRUE
+
+	puts "\tSec001.h.4: 2nd Reopen with encryption."
+	set env1 [berkdb_env -home $testdir -encryptaes $passwd1]
+	error_check_good env [is_valid_env $env1] TRUE
+
+	error_check_good envclose [$env1 close] 0
+	error_check_good envclose [$env close] 0
+
+	puts "\tSec001 complete."
+}