diff options
Diffstat (limited to 'buildconf')
| -rwxr-xr-x | buildconf | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/buildconf b/buildconf new file mode 100755 index 000000000..f77ed7665 --- /dev/null +++ b/buildconf @@ -0,0 +1,418 @@ +#!/bin/sh +#*************************************************************************** +# _ _ ____ _ +# Project ___| | | | _ \| | +# / __| | | | |_) | | +# | (__| |_| | _ <| |___ +# \___|\___/|_| \_\_____| +# +# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al. +# +# This software is licensed as described in the file COPYING, which +# you should have received as part of this distribution. The terms +# are also available at http://curl.haxx.se/docs/copyright.html. +# +# You may opt to use, copy, modify, merge, publish, distribute and/or sell +# copies of the Software, and permit persons to whom the Software is +# furnished to do so, under the terms of the COPYING file. +# +# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +# KIND, either express or implied. +# +########################################################################### + +die(){ + echo "$@" + exit +} + +#-------------------------------------------------------------------------- +# findtool works as 'which' but we use a different name to make it more +# obvious we aren't using 'which'! ;-) +# +findtool(){ + file="$1" + + if { echo $file | grep "/" >/dev/null 2>&1; } then + # we only check for the explicit file name if the file is given + # including a slash. Use ./ for current dir. Previously this would + # otherwise always cause findtool to search the local dir first, which + # is wrong. + if test -f "$file"; then + echo "$file" + return + fi + fi + + old_IFS=$IFS; IFS=':' + for path in $PATH + do + IFS=$old_IFS + # echo "checks for $file in $path" >&2 + if test -f "$path/$file"; then + echo "$path/$file" + return + fi + done + IFS=$old_IFS +} + +#-------------------------------------------------------------------------- +# removethis() removes all files and subdirectories with the given name, +# inside and below the current subdirectory at invocation time. +# +removethis(){ + if test "$#" = "1"; then + find . -depth -name $1 -print > buildconf.tmp.$$ + while read fdname + do + if test -f "$fdname"; then + rm -f "$fdname" + elif test -d "$fdname"; then + rm -f -r "$fdname" + fi + done < buildconf.tmp.$$ + rm -f buildconf.tmp.$$ + fi +} + +#-------------------------------------------------------------------------- +# Ensure that buildconf runs from the subdirectory where configure.ac lives +# +if test ! -f configure.ac || + test ! -f src/main.c || + test ! -f lib/urldata.h || + test ! -f include/curl/curl.h; then + echo "Can not run buildconf from outside of curl's source subdirectory!" + echo "Change to the subdirectory where buildconf is found, and try again." + exit 1 +fi + +#-------------------------------------------------------------------------- +# autoconf 2.57 or newer +# +need_autoconf="2.57" +ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|head -n 1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'` +if test -z "$ac_version"; then + echo "buildconf: autoconf not found." + echo " You need autoconf version $need_autoconf or newer installed." + exit 1 +fi +old_IFS=$IFS; IFS='.'; set $ac_version; IFS=$old_IFS +if test "$1" = "2" -a "$2" -lt "57" || test "$1" -lt "2"; then + echo "buildconf: autoconf version $ac_version found." + echo " You need autoconf version $need_autoconf or newer installed." + echo " If you have a sufficient autoconf installed, but it" + echo " is not named 'autoconf', then try setting the" + echo " AUTOCONF environment variable." + exit 1 +fi + +echo "buildconf: autoconf version $ac_version (ok)" + +am4te_version=`${AUTOM4TE:-autom4te} --version 2>/dev/null|head -n 1| sed -e 's/autom4te\(.*\)/\1/' -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'` +if test -z "$am4te_version"; then + echo "buildconf: autom4te not found. Weird autoconf installation!" + exit 1 +fi +if test "$am4te_version" = "$ac_version"; then + echo "buildconf: autom4te version $am4te_version (ok)" +else + echo "buildconf: autom4te version $am4te_version (ERROR: does not match autoconf version)" + exit 1 +fi + +#-------------------------------------------------------------------------- +# autoheader 2.50 or newer +# +ah_version=`${AUTOHEADER:-autoheader} --version 2>/dev/null|head -n 1| sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'` +if test -z "$ah_version"; then + echo "buildconf: autoheader not found." + echo " You need autoheader version 2.50 or newer installed." + exit 1 +fi +old_IFS=$IFS; IFS='.'; set $ah_version; IFS=$old_IFS +if test "$1" = "2" -a "$2" -lt "50" || test "$1" -lt "2"; then + echo "buildconf: autoheader version $ah_version found." + echo " You need autoheader version 2.50 or newer installed." + echo " If you have a sufficient autoheader installed, but it" + echo " is not named 'autoheader', then try setting the" + echo " AUTOHEADER environment variable." + exit 1 +fi + +echo "buildconf: autoheader version $ah_version (ok)" + +#-------------------------------------------------------------------------- +# automake 1.7 or newer +# +need_automake="1.7" +am_version=`${AUTOMAKE:-automake} --version 2>/dev/null|head -n 1| sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//' -e 's/\(.*\)\(-p.*\)/\1/'` +if test -z "$am_version"; then + echo "buildconf: automake not found." + echo " You need automake version $need_automake or newer installed." + exit 1 +fi +old_IFS=$IFS; IFS='.'; set $am_version; IFS=$old_IFS +if test "$1" = "1" -a "$2" -lt "7" || test "$1" -lt "1"; then + echo "buildconf: automake version $am_version found." + echo " You need automake version $need_automake or newer installed." + echo " If you have a sufficient automake installed, but it" + echo " is not named 'automake', then try setting the" + echo " AUTOMAKE environment variable." + exit 1 +fi + +echo "buildconf: automake version $am_version (ok)" + +acloc_version=`${ACLOCAL:-aclocal} --version 2>/dev/null|head -n 1| sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//' -e 's/\(.*\)\(-p.*\)/\1/'` +if test -z "$acloc_version"; then + echo "buildconf: aclocal not found. Weird automake installation!" + exit 1 +fi +if test "$acloc_version" = "$am_version"; then + echo "buildconf: aclocal version $acloc_version (ok)" +else + echo "buildconf: aclocal version $acloc_version (ERROR: does not match automake version)" + exit 1 +fi + +#-------------------------------------------------------------------------- +# libtool check +# +LIBTOOL_WANTED_MAJOR=1 +LIBTOOL_WANTED_MINOR=4 +LIBTOOL_WANTED_PATCH=2 +LIBTOOL_WANTED_VERSION=1.4.2 + +# this approach that tries 'glibtool' first is some kind of work-around for +# some BSD-systems I believe that use to provide the GNU libtool named +# glibtool, with 'libtool' being something completely different. +libtool=`findtool glibtool 2>/dev/null` +if test ! -x "$libtool"; then + libtool=`findtool ${LIBTOOL:-libtool}` +fi + +if test -z "$LIBTOOLIZE"; then + # set the LIBTOOLIZE here so that glibtoolize is used if glibtool was found + # $libtool is already the full path + libtoolize="${libtool}ize" +else + libtoolize=`findtool $LIBTOOLIZE` +fi + +lt_pver=`$libtool --version 2>/dev/null|head -n 1` +lt_qver=`echo $lt_pver|sed -e "s/([^)]*)//g" -e "s/^[^0-9]*//g"` +lt_version=`echo $lt_qver|sed -e "s/[- ].*//" -e "s/\([a-z]*\)$//"` +if test -z "$lt_version"; then + echo "buildconf: libtool not found." + echo " You need libtool version $LIBTOOL_WANTED_VERSION or newer installed" + exit 1 +fi +old_IFS=$IFS; IFS='.'; set $lt_version; IFS=$old_IFS +lt_major=$1 +lt_minor=$2 +lt_patch=$3 +lt_status="good" + +if test "$lt_major" = "$LIBTOOL_WANTED_MAJOR"; then + if test "$lt_minor" -lt "$LIBTOOL_WANTED_MINOR"; then + lt_status="bad" + elif test -n "$LIBTOOL_WANTED_PATCH"; then + if test "$lt_minor" -gt "$LIBTOOL_WANTED_MINOR"; then + lt_status="good" + elif test -n "$lt_patch"; then + if test "$lt_patch" -lt "$LIBTOOL_WANTED_PATCH"; then + lt_status="bad" + fi + else + lt_status="bad" + fi + fi +fi +if test $lt_status != "good"; then + echo "buildconf: libtool version $lt_version found." + echo " You need libtool version $LIBTOOL_WANTED_VERSION or newer installed" + exit 1 +fi + +echo "buildconf: libtool version $lt_version (ok)" + +if test -f "$libtoolize"; then + echo "buildconf: libtoolize found" +else + echo "buildconf: libtoolize not found. Weird libtool installation!" + exit 1 +fi + +#-------------------------------------------------------------------------- +# m4 check +# +m4=`(${M4:-m4} --version || ${M4:-gm4} --version) 2>/dev/null | head -n 1`; +m4_version=`echo $m4 | sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//'` + +if { echo $m4 | grep "GNU" >/dev/null 2>&1; } then + echo "buildconf: GNU m4 version $m4_version (ok)" +else + if test -z "$m4"; then + echo "buildconf: m4 version not recognized. You need a GNU m4 installed!" + else + echo "buildconf: m4 version $m4 found. You need a GNU m4 installed!" + fi + exit 1 +fi + +#-------------------------------------------------------------------------- +# perl check +# +PERL=`findtool ${PERL:-perl}` + +#-------------------------------------------------------------------------- +# Remove files generated on previous buildconf/configure run. +# +for fname in .deps \ + .libs \ + *.la \ + *.lo \ + *.a \ + *.o \ + Makefile \ + Makefile.in \ + aclocal.m4 \ + aclocal.m4.bak \ + ares_build.h \ + ares_config.h \ + ares_config.h.in \ + autom4te.cache \ + compile \ + config.guess \ + curl_config.h \ + curl_config.h.in \ + config.log \ + config.lt \ + config.status \ + config.sub \ + configure \ + configurehelp.pm \ + curl-config \ + curlbuild.h \ + depcomp \ + libcares.pc \ + libcurl.pc \ + libtool \ + libtool.m4 \ + ltmain.sh \ + ltoptions.m4 \ + ltsugar.m4 \ + ltversion.m4 \ + lt~obsolete.m4 \ + stamp-h1 \ + stamp-h2 \ + stamp-h3 ; do + removethis "$fname" +done + +#-------------------------------------------------------------------------- +# run the correct scripts now +# + +echo "buildconf: running libtoolize" +$libtoolize --copy --automake --force || die "The libtoolize command failed" + +if test ! -f m4/curl-functions.m4; then + echo "buildconf: cURL m4 macros not found" + exit 1 +fi + +echo "buildconf: running aclocal" +${ACLOCAL:-aclocal} -I m4 $ACLOCAL_FLAGS || die "The aclocal command line failed" + +if test -n "$PERL"; then + echo "buildconf: running aclocal hack to convert all mv to mv -f" + $PERL -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4 +else + echo "buildconf: perl not found" + exit 1 +fi + +echo "buildconf: running autoheader" +${AUTOHEADER:-autoheader} || die "The autoheader command failed" + +echo "buildconf: cp lib/curl_config.h.in src/curl_config.h.in" +cp lib/curl_config.h.in src/curl_config.h.in + +echo "buildconf: running autoconf" +${AUTOCONF:-autoconf} || die "The autoconf command failed" + +if test -d ares; then + cd ares + echo "buildconf: running in ares" + ./buildconf + cd .. +fi + +echo "buildconf: running automake" +${AUTOMAKE:-automake} -a -c || die "The automake command failed" + +#-------------------------------------------------------------------------- +# Depending on the libtool and automake versions being used, config.guess +# might not be installed in the subdirectory until automake has finished. +# So we can not attempt to use it until this very last buildconf stage. +# + +if test ! -f ./config.guess; then + echo "buildconf: config.guess not found" +else + buildhost=`./config.guess 2>/dev/null|head -n 1` + case $buildhost in + *-*-darwin*) + need_lt_major=1 + need_lt_minor=5 + need_lt_patch=26 + need_lt_check="yes" + ;; + *-*-hpux*) + need_lt_major=1 + need_lt_minor=5 + need_lt_patch=24 + need_lt_check="yes" + ;; + esac + if test ! -z "$need_lt_check"; then + if test -z "$lt_major"; then + lt_status="bad" + elif test "$lt_major" -gt "$need_lt_major"; then + lt_status="good" + elif test "$lt_major" -lt "$need_lt_major"; then + lt_status="bad" + elif test -z "$lt_minor"; then + lt_status="bad" + elif test "$lt_minor" -gt "$need_lt_minor"; then + lt_status="good" + elif test "$lt_minor" -lt "$need_lt_minor"; then + lt_status="bad" + elif test -z "$lt_patch"; then + lt_status="bad" + elif test "$lt_patch" -gt "$need_lt_patch"; then + lt_status="good" + elif test "$lt_patch" -lt "$need_lt_patch"; then + lt_status="bad" + else + lt_status="good" + fi + if test "$lt_status" != "good"; then + need_lt_version="$need_lt_major.$need_lt_minor.$need_lt_patch" + echo "buildconf: libtool version $lt_version found." + echo " $buildhost requires libtool $need_lt_version or newer installed." + rm -f configure + exit 1 + fi + fi +fi + +#-------------------------------------------------------------------------- +# Finished succesfully. +# + +echo "buildconf: OK" +exit 0 |