diff options
Diffstat (limited to 'locale/cups.strings')
| -rw-r--r-- | locale/cups.strings | 118 |
1 files changed, 59 insertions, 59 deletions
diff --git a/locale/cups.strings b/locale/cups.strings index 0f267cb..8f82709 100644 --- a/locale/cups.strings +++ b/locale/cups.strings @@ -25,7 +25,7 @@ "\tUsers denied:" = "\tUsers denied:"; "\tdaemon present" = "\tdaemon present"; "\tno entries" = "\tno entries"; -"\tprinter is on device '%s' speed -1" = "\tprinter is on device '%s' speed -1"; +"\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘s’speed -1"; "\tprinting is disabled" = "\tprinting is disabled"; "\tprinting is enabled" = "\tprinting is enabled"; "\tqueued for %s" = "\tqueued for %s"; @@ -216,7 +216,7 @@ " -D Remove the input file when finished." = " -D Remove the input file when finished."; " -D name=value Set named variable to value." = " -D name=value Set named variable to value."; " -E Encrypt the connection." = " -E Encrypt the connection."; -" -E Test with HTTP Upgrade to TLS." = " -E Test with HTTP Upgrade to TLS."; +" -E Test with encryption using HTTP Upgrade to TLS." = " -E Test with encryption using HTTP Upgrade to TLS."; " -F Run in the foreground but detach from console." = " -F Run in the foreground but detach from console."; " -H samba-server Use the named SAMBA server." = " -H samba-server Use the named SAMBA server."; " -I Ignore errors." = " -I Ignore errors."; @@ -227,7 +227,7 @@ " -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file."; " -P number[-number] Match port to number or range." = " -P number[-number] Match port to number or range."; " -R root-directory Set alternate root." = " -R root-directory Set alternate root."; -" -S Test with SSL encryption." = " -S Test with SSL encryption."; +" -S Test with encryption using HTTPS." = " -S Test with encryption using HTTPS."; " -T seconds Set the browse timeout in seconds." = " -T seconds Set the browse timeout in seconds."; " -T seconds Set the receive/send timeout in seconds." = " -T seconds Set the receive/send timeout in seconds."; " -U username Specify username." = " -U username Specify username."; @@ -269,7 +269,7 @@ " -q Quietly report match via exit code." = " -q Quietly report match via exit code."; " -q Run silently." = " -q Run silently."; " -r True if service is remote." = " -r True if service is remote."; -" -r Use 'relaxed' open mode." = " -r Use 'relaxed' open mode."; +" -r Use 'relaxed' open mode." = " -r Use ‘elaxed’open mode."; " -s Print service name if true." = " -s Print service name if true."; " -s cups-files.conf Set cups-files.conf file to use." = " -s cups-files.conf Set cups-files.conf file to use."; " -t Produce a test report." = " -t Produce a test report."; @@ -305,40 +305,40 @@ " {} URI" = " {} URI"; " FAIL" = " FAIL"; " PASS" = " PASS"; -"\"%s\": Bad URI value \"%s\" - %s (RFC 2911 section 4.1.5)." = "“%s”: Bad URI value “%s” - %s (RFC 2911 section 4.1.5)."; -"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 2911 section 4.1.5)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 2911 section 4.1.5)."; -"\"%s\": Bad attribute name - bad length %d (RFC 2911 section 4.1.3)." = "“%s”: Bad attribute name - bad length %d (RFC 2911 section 4.1.3)."; -"\"%s\": Bad attribute name - invalid character (RFC 2911 section 4.1.3)." = "“%s”: Bad attribute name - invalid character (RFC 2911 section 4.1.3)."; -"\"%s\": Bad boolen value %d (RFC 2911 section 4.1.11)." = "“%s”: Bad boolen value %d (RFC 2911 section 4.1.11)."; -"\"%s\": Bad charset value \"%s\" - bad characters (RFC 2911 section 4.1.7)." = "“%s”: Bad charset value “%s” - bad characters (RFC 2911 section 4.1.7)."; -"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 2911 section 4.1.7)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 2911 section 4.1.7)."; -"\"%s\": Bad dateTime UTC hours %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime UTC hours %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime UTC minutes %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime UTC minutes %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime UTC sign '%c' (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime UTC sign '%c' (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime day %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime day %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime deciseconds %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime deciseconds %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime hours %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime hours %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime minutes %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime minutes %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime month %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime month %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad dateTime seconds %u (RFC 2911 section 4.1.14)." = "“%s”: Bad dateTime seconds %u (RFC 2911 section 4.1.14)."; -"\"%s\": Bad enum value %d - out of range (RFC 2911 section 4.1.4)." = "“%s”: Bad enum value %d - out of range (RFC 2911 section 4.1.4)."; -"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 2911 section 4.1.3)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 2911 section 4.1.3)."; -"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 2911 section 4.1.3)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 2911 section 4.1.3)."; -"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 2911 section 4.1.9)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 2911 section 4.1.9)."; -"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 2911 section 4.1.9)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 2911 section 4.1.9)."; -"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 2911 section 4.1.2)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 2911 section 4.1.2)."; -"\"%s\": Bad name value \"%s\" - bad length %d (RFC 2911 section 4.1.2)." = "“%s”: Bad name value “%s” - bad length %d (RFC 2911 section 4.1.2)."; -"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 2911 section 4.1.8)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 2911 section 4.1.8)."; -"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 2911 section 4.1.8)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 2911 section 4.1.8)."; -"\"%s\": Bad octetString value - bad length %d (RFC 2911 section 4.1.10)." = "“%s”: Bad octetString value - bad length %d (RFC 2911 section 4.1.10)."; -"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 2911 section 4.1.13)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 2911 section 4.1.13)."; -"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 2911 section 4.1.15)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 2911 section 4.1.15)."; -"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 2911 section 4.1.15)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 2911 section 4.1.15)."; -"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 2911 section 4.1.15)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 2911 section 4.1.15)."; -"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 2911 section 4.1.1)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 2911 section 4.1.1)."; -"\"%s\": Bad text value \"%s\" - bad length %d (RFC 2911 section 4.1.1)." = "“%s”: Bad text value “%s” - bad length %d (RFC 2911 section 4.1.1)."; -"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 2911 section 4.1.6)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 2911 section 4.1.6)."; -"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 2911 section 4.1.6)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 2911 section 4.1.6)."; +"\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6)."; +"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6)."; +"\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4)."; +"\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4)."; +"\"%s\": Bad boolen value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolen value %d (RFC 8011 section 5.1.21)."; +"\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8)."; +"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8)."; +"\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘c’(RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15)."; +"\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5)."; +"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4)."; +"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4)."; +"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10)."; +"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10)."; +"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3)."; +"\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3)."; +"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9)."; +"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9)."; +"\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20)."; +"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)."; +"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)."; +"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)."; +"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)."; +"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2)."; +"\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2)."; +"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7)."; +"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7)."; "%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes"; "%d x %d mm" = "%d x %d mm"; "%g x %g" = "%g x %g"; @@ -364,9 +364,9 @@ "%s: %s failed: %s" = "%s: %s failed: %s"; "%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”."; "%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”."; -"%s: Don't know what to do." = "%s: Don't know what to do."; +"%s: Don't know what to do." = "%s: Don’ know what to do."; "%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”."; -"%s: Error - add '/version=1.1' to server name." = "%s: Error - add '/version=1.1' to server name."; +"%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘version=1.1’to server name."; "%s: Error - bad job ID." = "%s: Error - bad job ID."; "%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously."; "%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided."; @@ -719,7 +719,7 @@ "B8" = "B8"; "B9" = "B9"; "Back Print Film" = "Back Print Film"; -"Bad 'document-format' value \"%s\"." = "Bad 'document-format' value “%s”."; +"Bad 'document-format' value \"%s\"." = "Bad ‘ocument-format’value “%s”."; "Bad NULL dests pointer" = "Bad NULL dests pointer"; "Bad OpenGroup" = "Bad OpenGroup"; "Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI"; @@ -794,7 +794,7 @@ "Character set \"%s\" not supported." = "Character set “%s” not supported."; "Classes" = "Classes"; "Clean Print Heads" = "Clean Print Heads"; -"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn't support the job-uri attribute."; +"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’ support the job-uri attribute."; "Coat" = "Coat"; "Coated Envelope" = "Coated Envelope"; "Coated Paper" = "Coated Paper"; @@ -1064,9 +1064,9 @@ "JIS B9" = "JIS B9"; "Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files."; "Job #%d does not exist." = "Job #%d does not exist."; -"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can't cancel."; -"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can't cancel."; -"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can't cancel."; +"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’ cancel."; +"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’ cancel."; +"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’ cancel."; "Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered."; "Job #%d is not complete." = "Job #%d is not complete."; "Job #%d is not held for authentication." = "Job #%d is not held for authentication."; @@ -1368,7 +1368,7 @@ "Roll 7" = "Roll 7"; "Roll 8" = "Roll 8"; "Roll 9" = "Roll 9"; -"Running command: %s %s -N -A %s -c '%s'" = "Running command: %s %s -N -A %s -c '%s'"; +"Running command: %s %s -N -A %s -c '%s'" = "Running command: %s %s -N -A %s -c ‘s’"; "SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length"; "SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error"; "Saddle Stitch" = "Saddle Stitch"; @@ -1453,16 +1453,16 @@ "Tear-Off Adjust Position" = "Tear-Off Adjust Position"; "The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs."; "The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids."; -"The '%s' Job Status attribute cannot be supplied in a job creation request." = "The '%s' Job Status attribute cannot be supplied in a job creation request."; -"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The '%s' operation attribute cannot be supplied in a Create-Job request."; +"The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘s’Job Status attribute cannot be supplied in a job creation request."; +"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘s’operation attribute cannot be supplied in a Create-Job request."; "The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found."; "The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s"; "The PPD file could not be opened." = "The PPD file could not be opened."; "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)."; "The developer unit needs to be replaced." = "The developer unit needs to be replaced."; "The developer unit will need to be replaced soon." = "The developer unit will need to be replaced soon."; -"The fuser's temperature is high." = "The fuser's temperature is high."; -"The fuser's temperature is low." = "The fuser's temperature is low."; +"The fuser's temperature is high." = "The fuser’ temperature is high."; +"The fuser's temperature is low." = "The fuser’ temperature is low."; "The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions."; "The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets)."; "The optical photoconductor needs to be replaced." = "The optical photoconductor needs to be replaced."; @@ -1484,11 +1484,11 @@ "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)."; "The printer or class does not exist." = "The printer or class does not exist."; "The printer or class is not shared." = "The printer or class is not shared."; -"The printer's cover is open." = "The printer's cover is open."; -"The printer's door is open." = "The printer's door is open."; -"The printer's interlock is open." = "The printer's interlock is open."; -"The printer's waste bin is almost full." = "The printer's waste bin is almost full."; -"The printer's waste bin is full." = "The printer's waste bin is full."; +"The printer's cover is open." = "The printer’ cover is open."; +"The printer's door is open." = "The printer’ door is open."; +"The printer's interlock is open." = "The printer’ interlock is open."; +"The printer's waste bin is almost full." = "The printer’ waste bin is almost full."; +"The printer's waste bin is full." = "The printer’ waste bin is full."; "The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters."; "The printer-uri attribute is required." = "The printer-uri attribute is required."; "The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”."; @@ -1650,9 +1650,9 @@ "Unknown scheme in URI" = "Unknown scheme in URI"; "Unknown service name." = "Unknown service name."; "Unknown version option value: \"%s\"." = "Unknown version option value: “%s”."; -"Unsupported 'compression' value \"%s\"." = "Unsupported 'compression' value “%s”."; -"Unsupported 'document-format' value \"%s\"." = "Unsupported 'document-format' value “%s”."; -"Unsupported 'job-name' value." = "Unsupported 'job-name' value."; +"Unsupported 'compression' value \"%s\"." = "Unsupported ‘ompression’value “%s”."; +"Unsupported 'document-format' value \"%s\"." = "Unsupported ‘ocument-format’value “%s”."; +"Unsupported 'job-name' value." = "Unsupported ‘ob-name’value."; "Unsupported character set \"%s\"." = "Unsupported character set “%s”."; "Unsupported compression \"%s\"." = "Unsupported compression “%s”."; "Unsupported document-format \"%s\"." = "Unsupported document-format “%s”."; @@ -1889,7 +1889,7 @@ "ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s."; "ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s."; "ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s."; -"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if's on line %d of %s."; +"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’ on line %d of %s."; "ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s."; "ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s"; "ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s"; |