@if not defined _echo @echo off setlocal EnableDelayedExpansion EnableExtensions :: Define a prefix for most output progress messages that come from this script. That makes :: it easier to see where these are coming from. Note that there is a trailing space here. set "__MsgPrefix=BUILD: " echo %__MsgPrefix%Starting Build at %TIME% set __ThisScriptFull="%~f0" set __ThisScriptDir="%~dp0" :: Default to highest Visual Studio version available :: :: For VS2015 (and prior), only a single instance is allowed to be installed on a box :: and VS140COMNTOOLS is set as a global environment variable by the installer. This :: allows users to locate where the instance of VS2015 is installed. :: :: For VS2017, multiple instances can be installed on the same box SxS and VS150COMNTOOLS :: is no longer set as a global environment variable and is instead only set if the user :: has launched the VS2017 Developer Command Prompt. :: :: Following this logic, we will default to the VS2017 toolset if VS150COMNTOOLS tools is :: set, as this indicates the user is running from the VS2017 Developer Command Prompt and :: is already configured to use that toolset. Otherwise, we will fallback to using the VS2015 :: toolset if it is installed. Finally, we will fail the script if no supported VS instance :: can be found. if defined VisualStudioVersion ( if not defined __VSVersion echo %__MsgPrefix%Detected Visual Studio %VisualStudioVersion% developer command ^prompt environment goto :Run ) echo %__MsgPrefix%"Searching for Visual Studio 2017 or 2015 installation" set _VSWHERE="%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" if exist %_VSWHERE% ( for /f "usebackq tokens=*" %%i in (`%_VSWHERE% -latest -prerelease -property installationPath`) do set _VSCOMNTOOLS=%%i\Common7\Tools ) if not exist "%_VSCOMNTOOLS%" set _VSCOMNTOOLS=%VS140COMNTOOLS% if not exist "%_VSCOMNTOOLS%" ( echo %__MsgPrefix%Error: Visual Studio 2015 or 2017 required. echo Please see https://github.com/dotnet/corefx/blob/master/Documentation/project-docs/developer-guide.md for build instructions. exit /b 1 ) call "%_VSCOMNTOOLS%\VsDevCmd.bat" :Run if defined VS150COMNTOOLS ( set "__VSToolsRoot=%VS150COMNTOOLS%" set "__VCToolsRoot=%VS150COMNTOOLS%\..\..\VC\Auxiliary\Build" set __VSVersion=vs2017 ) else ( set "__VSToolsRoot=%VS140COMNTOOLS%" set "__VCToolsRoot=%VS140COMNTOOLS%\..\..\VC" set __VSVersion=vs2015 ) :: Note that the msbuild project files (specifically, dir.proj) will use the following variables, if set: :: __BuildArch -- default: x64 :: __BuildType -- default: Debug :: __BuildOS -- default: Windows_NT :: __ProjectDir -- default: directory of the dir.props file :: __SourceDir -- default: %__ProjectDir%\src\ :: __PackagesDir -- default: %__ProjectDir%\packages\ :: __RootBinDir -- default: %__ProjectDir%\bin\ :: __BinDir -- default: %__RootBinDir%\%__BuildOS%.%__BuildArch.%__BuildType%\ :: __IntermediatesDir :: __PackagesBinDir -- default: %__BinDir%\.nuget :: __TestWorkingDir -- default: %__RootBinDir%\tests\%__BuildOS%.%__BuildArch.%__BuildType%\ :: :: Thus, these variables are not simply internal to this script! :: Set the default arguments for build set __BuildArch=x64 set __BuildType=Debug set __BuildOS=Windows_NT :: Set the various build properties here so that CMake and MSBuild can pick them up set "__ProjectDir=%~dp0" :: remove trailing slash if %__ProjectDir:~-1%==\ set "__ProjectDir=%__ProjectDir:~0,-1%" set "__ProjectFilesDir=%__ProjectDir%" set "__SourceDir=%__ProjectDir%\src" set "__PackagesDir=%DotNetRestorePackagesPath%" if [%__PackagesDir%]==[] set "__PackagesDir=%__ProjectDir%\packages" set "__RootBinDir=%__ProjectDir%\bin" set "__LogsDir=%__RootBinDir%\Logs" set "__PgoOptDataVersion=" set "__IbcOptDataVersion=" set __BuildAll= set __BuildArchX64=0 set __BuildArchX86=0 set __BuildArchArm=0 set __BuildArchArm64=0 set __BuildTypeDebug=0 set __BuildTypeChecked=0 set __BuildTypeRelease=0 set __PgoInstrument=0 set __PgoOptimize=1 set __EnforcePgo=0 set __IbcTuning= REM __PassThroughArgs is a set of things that will be passed through to nested calls to build.cmd REM when using "all". set __PassThroughArgs= REM __UnprocessedBuildArgs are args that we pass to msbuild (e.g. /p:__BuildArch=x64) set "__args= %*" set processedArgs= set __UnprocessedBuildArgs= set __RunArgs= set __BuildCoreLib=1 set __BuildSOS=1 set __BuildNative=1 set __BuildTests=1 set __BuildPackages=1 set __BuildNativeCoreLib=1 set __RestoreOptData=1 :Arg_Loop if "%1" == "" goto ArgsDone if /i "%1" == "-?" goto Usage if /i "%1" == "-h" goto Usage if /i "%1" == "-help" goto Usage if /i "%1" == "--help" goto Usage if /i "%1" == "-all" (set __BuildAll=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-x64" (set __BuildArchX64=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-x86" (set __BuildArchX86=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-arm" (set __BuildArchArm=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-arm64" (set __BuildArchArm64=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-debug" (set __BuildTypeDebug=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-checked" (set __BuildTypeChecked=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-release" (set __BuildTypeRelease=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) REM TODO these are deprecated remove them eventually REM don't add more, use the - syntax instead if /i "%1" == "all" (set __BuildAll=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "x64" (set __BuildArchX64=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "x86" (set __BuildArchX86=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "arm" (set __BuildArchArm=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "arm64" (set __BuildArchArm64=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "debug" (set __BuildTypeDebug=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "checked" (set __BuildTypeChecked=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "release" (set __BuildTypeRelease=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) REM All arguments after this point will be passed through directly to build.cmd on nested invocations REM using the "all" argument, and must be added to the __PassThroughArgs variable. if [!__PassThroughArgs!]==[] ( set __PassThroughArgs=%1 ) else ( set __PassThroughArgs=%__PassThroughArgs% %1 ) if /i "%1" == "-freebsdmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=FreeBSD&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-linuxmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=Linux&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-netbsdmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=NetBSD&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-osxmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=OSX&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-windowsmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=Windows_NT&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-nativemscorlib" (set __BuildNativeCoreLib=1&set __BuildCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-configureonly" (set __ConfigureOnly=1&set __BuildNative=1&set __BuildNativeCoreLib=0&set __BuildCoreLib=0&set __BuildTests=0&set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-skipconfigure" (set __SkipConfigure=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-skipmscorlib" (set __BuildCoreLib=0&set __BuildNativeCoreLib=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-skipnative" (set __BuildNative=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-skiptests" (set __BuildTests=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-skipbuildpackages" (set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-skiprestoreoptdata" (set __RestoreOptData=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-usenmakemakefiles" (set __NMakeMakefiles=1&set __ConfigureOnly=1&set __BuildNative=1&set __BuildNativeCoreLib=0&set __BuildCoreLib=0&set __BuildTests=0&set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-pgoinstrument" (set __PgoInstrument=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-enforcepgo" (set __EnforcePgo=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-nopgooptimize" (set __PgoOptimize=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-ibcinstrument" (set __IbcTuning=/Tuning&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-toolset_dir" (set __ToolsetDir=%2&set __PassThroughArgs=%__PassThroughArgs% %2&set processedArgs=!processedArgs! %1 %2&shift&shift&goto Arg_Loop) REM TODO these are deprecated remove them eventually REM don't add more, use the - syntax instead if /i "%1" == "freebsdmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=FreeBSD&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "linuxmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=Linux&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "netbsdmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=NetBSD&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "osxmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=OSX&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "windowsmscorlib" (set __BuildSOS=0&set __BuildNativeCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set __BuildOS=Windows_NT&set __SkipNugetPackage=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "nativemscorlib" (set __BuildNativeCoreLib=1&set __BuildCoreLib=0&set __BuildNative=0&set __BuildTests=0&set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "configureonly" (set __ConfigureOnly=1&set __BuildNative=1&set __BuildNativeCoreLib=0&set __BuildCoreLib=0&set __BuildTests=0&set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "skipconfigure" (set __SkipConfigure=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "skipmscorlib" (set __BuildCoreLib=0&set __BuildNativeCoreLib=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "skipnative" (set __BuildNative=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "skiptests" (set __BuildTests=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "skipbuildpackages" (set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "skiprestoreoptdata" (set __RestoreOptData=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "usenmakemakefiles" (set __NMakeMakefiles=1&set __ConfigureOnly=1&set __BuildNative=1&set __BuildNativeCoreLib=0&set __BuildCoreLib=0&set __BuildTests=0&set __BuildPackages=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "pgoinstrument" (set __PgoInstrument=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "nopgooptimize" (set __PgoOptimize=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "enforcepgo" (set __EnforcePgo=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "ibcinstrument" (set __IbcTuning=/Tuning&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "toolset_dir" (set __ToolsetDir=%2&set __PassThroughArgs=%__PassThroughArgs% %2&set processedArgs=!processedArgs! %1 %2&shift&shift&goto Arg_Loop) @REM The following can be deleted once the CI system that passes it is updated to not pass it. if /i "%1" == "altjitcrossgen" (set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if [!processedArgs!]==[] ( set __UnprocessedBuildArgs=%__args% ) else ( set __UnprocessedBuildArgs=%__args% for %%t in (!processedArgs!) do ( set __UnprocessedBuildArgs=!__UnprocessedBuildArgs:*%%t=! ) ) :ArgsDone if %__PgoOptimize%==0 set __RestoreOptData=0 if defined __BuildAll goto BuildAll set /A __TotalSpecifiedBuildArch=__BuildArchX64 + __BuildArchX86 + __BuildArchArm + __BuildArchArm64 if %__TotalSpecifiedBuildArch% GTR 1 ( echo Error: more than one build architecture specified, but "all" not specified. goto Usage ) if %__BuildArchX64%==1 set __BuildArch=x64 if %__BuildArchX86%==1 set __BuildArch=x86 if %__BuildArchArm%==1 ( set __BuildArch=arm set __CrossArch=x86 ) if %__BuildArchArm64%==1 ( set __BuildArch=arm64 set __CrossArch=x64 ) set /A __TotalSpecifiedBuildType=__BuildTypeDebug + __BuildTypeChecked + __BuildTypeRelease if %__TotalSpecifiedBuildType% GTR 1 ( echo Error: more than one build type specified, but "all" not specified. goto Usage ) if %__BuildTypeDebug%==1 set __BuildType=Debug if %__BuildTypeChecked%==1 set __BuildType=Checked if %__BuildTypeRelease%==1 set __BuildType=Release set __RunArgs=-BuildOS=%__BuildOS% -BuildType=%__BuildType% -BuildArch=%__BuildArch% if %__EnforcePgo%==1 ( if %__BuildArchArm%==1 ( echo NOTICE: enforcepgo does nothing on arm architecture ) if %__BuildArchArm64%==1 ( echo NOTICE: enforcepgo does nothing on arm64 architecture ) ) :: Set the remaining variables based upon the determined build configuration set "__BinDir=%__RootBinDir%\Product\%__BuildOS%.%__BuildArch%.%__BuildType%" set "__IntermediatesDir=%__RootBinDir%\obj\%__BuildOS%.%__BuildArch%.%__BuildType%" if "%__NMakeMakefiles%"=="1" (set "__IntermediatesDir=%__RootBinDir%\nmakeobj\%__BuildOS%.%__BuildArch%.%__BuildType%") set "__PackagesBinDir=%__BinDir%\.nuget" set "__TestRootDir=%__RootBinDir%\tests" set "__TestBinDir=%__TestRootDir%\%__BuildOS%.%__BuildArch%.%__BuildType%" set "__TestIntermediatesDir=%__RootBinDir%\tests\obj\%__BuildOS%.%__BuildArch%.%__BuildType%" set "__CrossComponentBinDir=%__BinDir%" set "__CrossCompIntermediatesDir=%__IntermediatesDir%\crossgen" if NOT "%__CrossArch%" == "" set __CrossComponentBinDir=%__CrossComponentBinDir%\%__CrossArch% set "__CrossGenCoreLibLog=%__LogsDir%\CrossgenCoreLib_%__BuildOS%__%__BuildArch%__%__BuildType%.log" set "__CrossgenExe=%__CrossComponentBinDir%\crossgen.exe" :: Generate path to be set for CMAKE_INSTALL_PREFIX to contain forward slash set "__CMakeBinDir=%__BinDir%" set "__CMakeBinDir=%__CMakeBinDir:\=/%" if not exist "%__BinDir%" md "%__BinDir%" if not exist "%__IntermediatesDir%" md "%__IntermediatesDir%" if not exist "%__LogsDir%" md "%__LogsDir%" REM It is convenient to have your Nuget search path include the location where the build REM will place packages. However nuget used during the build will fail if that directory REM does not exist. Avoid this in at least one case by aggressively creating the directory. if not exist "%__BinDir%\.nuget\pkg" md "%__BinDir%\.nuget\pkg" echo %__MsgPrefix%Commencing CoreCLR Repo build :: Set the remaining variables based upon the determined build configuration echo %__MsgPrefix%Checking prerequisites :: Eval the output from probe-win1.ps1 for /f "delims=" %%a in ('powershell -NoProfile -ExecutionPolicy ByPass "& ""%__SourceDir%\pal\tools\probe-win.ps1"""') do %%a REM NumberOfEnabledCore is an WMI property providing number of enabled cores on machine REM processor(s) and later is used to set optimal level of CL parallelism during native build step if not defined NumberOfCores ( REM Determine number of physical processor cores available on machine for /f "tokens=*" %%I in ( 'wmic cpu get NumberOfCores /value ^| find "=" 2^>NUL' ) do set %%I ) echo %__MsgPrefix%Number of processor cores %NumberOfCores% REM ========================================================================================= REM === REM === Start the build steps REM === REM ========================================================================================= @if defined _echo @echo on @call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\build.proj -generateHeaderWindows -NativeVersionHeaderFile="%__RootBinDir%\obj\_version.h" %__RunArgs% %__UnprocessedBuildArgs% REM ========================================================================================= REM === REM === Restore optimization profile data REM === REM ========================================================================================= if %__RestoreOptData% EQU 1 if %__BuildTypeRelease% EQU 1 ( echo %__MsgPrefix%Restoring the OptimizationData Package @call %__ProjectDir%\run.cmd sync -optdata if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: Failed to restore the optimization data package. exit /b 1 ) ) REM Parse the optdata package versions out of msbuild so that we can pass them on to CMake set DotNetCli=%__ProjectDir%\Tools\dotnetcli\dotnet.exe if not exist "%DotNetCli%" ( echo %__MsgPrefix%Assertion failed: dotnet.exe not found at path "%DotNetCli%" exit /b 1 ) set OptDataProjectFilePath=%__ProjectDir%\src\.nuget\optdata\optdata.csproj for /f "tokens=*" %%s in ('%DotNetCli% msbuild "%OptDataProjectFilePath%" /t:DumpPgoDataPackageVersion /nologo') do @( set __PgoOptDataVersion=%%s ) for /f "tokens=*" %%s in ('%DotNetCli% msbuild "%OptDataProjectFilePath%" /t:DumpIbcDataPackageVersion /nologo') do @( set __IbcOptDataVersion=%%s ) REM ========================================================================================= REM === REM === Build the CLR VM REM === REM ========================================================================================= if %__BuildNative% EQU 1 ( REM Scope environment changes start { setlocal echo %__MsgPrefix%Commencing build of native components for %__BuildOS%.%__BuildArch%.%__BuildType% set __NativePlatformArgs=-platform=%__BuildArch% if not "%__ToolsetDir%" == "" ( set __NativePlatformArgs=-useEnv ) if not "%__ToolsetDir%" == "" ( rem arm64 builds currently use private toolset which has not been released yet REM TODO, remove once the toolset is open. call :PrivateToolSet goto GenVSSolution ) :: Set the environment for the native build set __VCBuildArch=x86_amd64 if /i "%__BuildArch%" == "x86" ( set __VCBuildArch=x86 ) if /i "%__BuildArch%" == "arm" ( set __VCBuildArch=x86_arm REM Make CMake pick the highest installed version in the 10.0.* range set ___SDKVersion="-DCMAKE_SYSTEM_VERSION=10.0" ) if /i "%__BuildArch%" == "arm64" ( set __VCBuildArch=x86_arm64 REM Make CMake pick the highest installed version in the 10.0.* range set ___SDKVersion="-DCMAKE_SYSTEM_VERSION=10.0" ) echo %__MsgPrefix%Using environment: "%__VCToolsRoot%\vcvarsall.bat" !__VCBuildArch! call "%__VCToolsRoot%\vcvarsall.bat" !__VCBuildArch! @if defined _echo @echo on if not defined VSINSTALLDIR ( echo %__MsgPrefix%Error: VSINSTALLDIR variable not defined. exit /b 1 ) if not exist "!VSINSTALLDIR!DIA SDK" goto NoDIA :GenVSSolution if defined __SkipConfigure goto SkipConfigure echo %__MsgPrefix%Regenerating the Visual Studio solution pushd "%__IntermediatesDir%" set __ExtraCmakeArgs=!___SDKVersion! "-DCLR_CMAKE_TARGET_OS=%__BuildOs%" "-DCLR_CMAKE_PACKAGES_DIR=%__PackagesDir%" "-DCLR_CMAKE_PGO_INSTRUMENT=%__PgoInstrument%" "-DCLR_CMAKE_OPTDATA_VERSION=%__PgoOptDataVersion%" "-DCLR_CMAKE_PGO_OPTIMIZE=%__PgoOptimize%" call "%__SourceDir%\pal\tools\gen-buildsys-win.bat" "%__ProjectDir%" %__VSVersion% %__BuildArch% !__ExtraCmakeArgs! @if defined _echo @echo on popd :SkipConfigure if defined __ConfigureOnly goto SkipNativeBuild if not exist "%__IntermediatesDir%\install.vcxproj" ( echo %__MsgPrefix%Error: failed to generate native component build project! exit /b 1 ) set __BuildLogRootName=CoreCLR set __BuildLog="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.log" set __BuildWrn="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn" set __BuildErr="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.err" set __MsbuildLog=/flp:Verbosity=normal;LogFile=!__BuildLog! set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! @call %__ProjectDir%\run.cmd build -Project=%__IntermediatesDir%\install.vcxproj -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! -configuration=%__BuildType% %__NativePlatformArgs% %__RunArgs% -ExtraParameters="/p:ForceImportBeforeCppTargets=%__ProjectDir%/clr.nativebuild.props /m:2" %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: native component build failed. Refer to the build log files for details: echo !__BuildLog! echo !__BuildWrn! echo !__BuildErr! exit /b 1 ) :SkipNativeBuild REM } Scope environment changes end endlocal ) REM ========================================================================================= REM === REM === Build Cross-Architecture Native Components (if applicable) REM === REM ========================================================================================= if /i "%__BuildArch%"=="arm64" ( set __DoCrossArchBuild=1 ) if /i "%__BuildArch%"=="arm" ( set __DoCrossArchBuild=1 ) if /i "%__DoCrossArchBuild%"=="1" ( REM Scope environment changes start { setlocal echo %__MsgPrefix%Commencing build of cross architecture native components for %__BuildOS%.%__BuildArch%.%__BuildType% :: Set the environment for the native build set __VCBuildArch=x86_amd64 if /i "%__CrossArch%" == "x86" ( set __VCBuildArch=x86 ) echo %__MsgPrefix%Using environment: "%__VCToolsRoot%\vcvarsall.bat" !__VCBuildArch! call "%__VCToolsRoot%\vcvarsall.bat" !__VCBuildArch! @if defined _echo @echo on if not exist "%__CrossCompIntermediatesDir%" md "%__CrossCompIntermediatesDir%" if defined __SkipConfigure goto SkipConfigureCrossBuild pushd "%__CrossCompIntermediatesDir%" set __CMakeBinDir=%__CrossComponentBinDir% set "__CMakeBinDir=!__CMakeBinDir:\=/!" set __ExtraCmakeArgs="-DCLR_CROSS_COMPONENTS_BUILD=1" "-DCLR_CMAKE_TARGET_ARCH=%__BuildArch%" "-DCLR_CMAKE_TARGET_OS=%__BuildOs%" "-DCLR_CMAKE_PACKAGES_DIR=%__PackagesDir%" "-DCLR_CMAKE_PGO_INSTRUMENT=%__PgoInstrument%" "-DCLR_CMAKE_OPTDATA_VERSION=%__PgoOptDataVersion%" "-DCLR_CMAKE_PGO_OPTIMIZE=%__PgoOptimize%" "-DCMAKE_SYSTEM_VERSION=10.0" call "%__SourceDir%\pal\tools\gen-buildsys-win.bat" "%__ProjectDir%" %__VSVersion% %__CrossArch% !__ExtraCmakeArgs! @if defined _echo @echo on popd :SkipConfigureCrossBuild if not exist "%__CrossCompIntermediatesDir%\install.vcxproj" ( echo %__MsgPrefix%Error: failed to generate cross-arch components build project! exit /b 1 ) if defined __ConfigureOnly goto SkipCrossCompBuild set __BuildLogRootName=Cross set __BuildLog="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.log" set __BuildWrn="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn" set __BuildErr="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.err" set __MsbuildLog=/flp:Verbosity=normal;LogFile=!__BuildLog! set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! @call %__ProjectDir%\run.cmd build -Project=%__CrossCompIntermediatesDir%\install.vcxproj -configuration=%__BuildType% -platform=%__CrossArch% -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! %__RunArgs% -ExtraParameters="/p:ForceImportBeforeCppTargets=%__ProjectDir%/clr.nativebuild.props /m:2" %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: cross-arch components build failed. Refer to the build log files for details: echo !__BuildLog! echo !__BuildWrn! echo !__BuildErr! exit /b 1 ) :SkipCrossCompBuild REM } Scope environment changes end endlocal ) REM ========================================================================================= REM === REM === CoreLib and NuGet package build section. REM === REM ========================================================================================= if %__BuildCoreLib% EQU 1 ( REM Scope environment changes start { setlocal echo %__MsgPrefix%Commencing build of System.Private.CoreLib for %__BuildOS%.%__BuildArch%.%__BuildType% rem Explicitly set Platform causes conflicts in CoreLib project files. Clear it to allow building from VS x64 Native Tools Command Prompt set Platform= set __ExtraBuildArgs= if not defined __IbcTuning ( set __ExtraBuildArgs=!__ExtraBuildArgs! -OptimizationDataDir="%__PackagesDir%/optimization.%__BuildOS%-%__BuildArch%.IBC.CoreCLR/%__IbcOptDataVersion%/data/" set __ExtraBuildArgs=!__ExtraBuildArgs! -EnableProfileGuidedOptimization=true ) if "%__BuildSOS%" == "0" ( set __ExtraBuildArgs=!__ExtraBuildArgs! -SkipSOS=true ) if /i "%__BuildArch%" == "arm64" ( set __nugetBuildArgs=-buildNugetPackage=false ) else if "%__SkipNugetPackage%" == "1" ( set __nugetBuildArgs=-buildNugetPackage=false ) else ( set __nugetBuildArgs=-buildNugetPackage=true ) set __BuildLogRootName=System.Private.CoreLib set __BuildLog="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.log" set __BuildWrn="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn" set __BuildErr="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.err" set __MsbuildLog=/flp:Verbosity=normal;LogFile=!__BuildLog! set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! @call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\build.proj -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! !__nugetBuildArgs! %__RunArgs% !__ExtraBuildArgs! %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: System.Private.CoreLib build failed. Refer to the build log files for details: echo !__BuildLog! echo !__BuildWrn! echo !__BuildErr! exit /b 1 ) REM } Scope environment changes end endlocal ) REM Scope environment changes start { setlocal REM Need diasymreader.dll on your path for /CreatePdb set PATH=%PATH%;%WinDir%\Microsoft.Net\Framework64\V4.0.30319;%WinDir%\Microsoft.Net\Framework\V4.0.30319 if %__BuildNativeCoreLib% EQU 1 ( echo %__MsgPrefix%Generating native image of System.Private.CoreLib for %__BuildOS%.%__BuildArch%.%__BuildType% REM Need VS native tools environment for the **target** arch when running instrumented binaries if %__PgoInstrument% EQU 1 ( set __VCExecArch=%__BuildArch% if /i [%__BuildArch%] == [x64] set __VCExecArch=amd64 echo %__MsgPrefix%Using environment: "%__VCToolsRoot%\vcvarsall.bat" !__VCExecArch! call "%__VCToolsRoot%\vcvarsall.bat" !__VCExecArch! @if defined _echo @echo on if NOT !errorlevel! == 0 ( echo %__MsgPrefix%Error: Failed to load native tools environment for !__VCExecArch! goto CrossgenFailure ) REM HACK: Workaround for [dotnet/coreclr#13970](https://github.com/dotnet/coreclr/issues/13970) set __PgoRtPath= for /f "tokens=*" %%f in ('where pgort*.dll') do ( if not defined __PgoRtPath set "__PgoRtPath=%%~f" ) echo %__MsgPrefix%Copying "!__PgoRtPath!" into "%__BinDir%" copy /y "!__PgoRtPath!" "%__BinDir%" || ( echo %__MsgPrefix%Error: copy failed goto CrossgenFailure ) REM End HACK ) set NEXTCMD="%__CrossgenExe%" %__IbcTuning% /Platform_Assemblies_Paths "%__BinDir%"\IL /out "%__BinDir%\System.Private.CoreLib.dll" "%__BinDir%\IL\System.Private.CoreLib.dll" echo %__MsgPrefix%!NEXTCMD! !NEXTCMD! > "%__CrossGenCoreLibLog%" 2>&1 if NOT !errorlevel! == 0 ( echo %__MsgPrefix%Error: CrossGen System.Private.CoreLib build failed. Refer to %__CrossGenCoreLibLog% :: Put it in the same log, helpful for Jenkins type %__CrossGenCoreLibLog% goto CrossgenFailure ) set NEXTCMD="%__CrossgenExe%" /Platform_Assemblies_Paths "%__BinDir%" /CreatePdb "%__BinDir%\PDB" "%__BinDir%\System.Private.CoreLib.dll" echo %__MsgPrefix%!NEXTCMD! !NEXTCMD! >> "%__CrossGenCoreLibLog%" 2>&1 if NOT !errorlevel! == 0 ( echo %__MsgPrefix%Error: CrossGen /CreatePdb System.Private.CoreLib build failed. Refer to %__CrossGenCoreLibLog% :: Put it in the same log, helpful for Jenkins type %__CrossGenCoreLibLog% goto CrossgenFailure ) ) REM } Scope environment changes end endlocal if %__BuildPackages% EQU 1 ( REM Scope environment changes start { setlocal echo %__MsgPrefix%Building Packages for %__BuildOS%.%__BuildArch%.%__BuildType% set __BuildLogRootName=Nuget set __BuildLog="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.log" set __BuildWrn="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn" set __BuildErr="%__LogsDir%\!__BuildLogRootName!_%__BuildOS%__%__BuildArch%__%__BuildType%.err" set __MsbuildLog=/flp:Verbosity=normal;LogFile=!__BuildLog! set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! REM The conditions as to what to build are captured in the builds file. @call %__ProjectDir%\run.cmd build -Project=%__SourceDir%\.nuget\packages.builds -platform=%__BuildArch% -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! %__RunArgs% %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: Nuget package generation failed build failed. Refer to the build log files for details: echo !__BuildLog! echo !__BuildWrn! echo !__BuildErr! exit /b 1 ) REM } Scope environment changes end endlocal ) REM ========================================================================================= REM === REM === Test build section REM === REM ========================================================================================= if %__BuildTests% EQU 1 ( echo %__MsgPrefix%Commencing build of tests for %__BuildOS%.%__BuildArch%.%__BuildType% REM Construct the arguments to pass to the test build script. rem arm64 builds currently use private toolset which has not been released yet REM TODO, remove once the toolset is open. if not "%__ToolsetDir%" == "" call :PrivateToolSet set NEXTCMD=call %__ProjectDir%\build-test.cmd %__BuildArch% %__BuildType% %__UnprocessedBuildArgs% echo %__MsgPrefix%!NEXTCMD! !NEXTCMD! if not !errorlevel! == 0 ( REM buildtest.cmd has already emitted an error message and mentioned the build log file to examine. exit /b 1 ) ) REM ========================================================================================= REM === REM === All builds complete! REM === REM ========================================================================================= echo %__MsgPrefix%Repo successfully built. Finished at %TIME% echo %__MsgPrefix%Product binaries are available at !__BinDir! if %__BuildTests% EQU 1 ( echo %__MsgPrefix%Test binaries are available at !__TestBinDir! ) exit /b 0 REM ========================================================================================= REM === REM === Handle the "all" case. REM === REM ========================================================================================= :BuildAll set __BuildArchList= set /A __TotalSpecifiedBuildArch=__BuildArchX64 + __BuildArchX86 + __BuildArchArm + __BuildArchArm64 if %__TotalSpecifiedBuildArch% EQU 0 ( REM Nothing specified means we want to build all architectures. set __BuildArchList=x64 x86 arm arm64 ) REM Otherwise, add all the specified architectures to the list. if %__BuildArchX64%==1 set __BuildArchList=%__BuildArchList% x64 if %__BuildArchX86%==1 set __BuildArchList=%__BuildArchList% x86 if %__BuildArchArm%==1 set __BuildArchList=%__BuildArchList% arm if %__BuildArchArm64%==1 set __BuildArchList=%__BuildArchList% arm64 set __BuildTypeList= set /A __TotalSpecifiedBuildType=__BuildTypeDebug + __BuildTypeChecked + __BuildTypeRelease if %__TotalSpecifiedBuildType% EQU 0 ( REM Nothing specified means we want to build all build types. set __BuildTypeList=Debug Checked Release ) if %__BuildTypeDebug%==1 set __BuildTypeList=%__BuildTypeList% Debug if %__BuildTypeChecked%==1 set __BuildTypeList=%__BuildTypeList% Checked if %__BuildTypeRelease%==1 set __BuildTypeList=%__BuildTypeList% Release REM Create a temporary file to collect build results. We always build all flavors specified, and REM report a summary of the results at the end. set __AllBuildSuccess=true set __BuildResultFile=%TEMP%\build-all-summary-%RANDOM%.txt if exist %__BuildResultFile% del /f /q %__BuildResultFile% for %%i in (%__BuildArchList%) do ( for %%j in (%__BuildTypeList%) do ( call :BuildOne %%i %%j ) ) if %__AllBuildSuccess%==true ( echo %__MsgPrefix%All builds succeeded! exit /b 0 ) else ( echo %__MsgPrefix%Builds failed: type %__BuildResultFile% del /f /q %__BuildResultFile% exit /b 1 ) REM This code is unreachable, but leaving it nonetheless, just in case things change. exit /b 99 :BuildOne set __BuildArch=%1 set __BuildType=%2 set __NextCmd=call %__ThisScriptFull% %__BuildArch% %__BuildType% %__PassThroughArgs% echo %__MsgPrefix%Invoking: %__NextCmd% %__NextCmd% if not !errorlevel! == 0 ( echo %__MsgPrefix% %__BuildArch% %__BuildType% %__PassThroughArgs% >> %__BuildResultFile% set __AllBuildSuccess=false ) exit /b 0 REM ========================================================================================= REM === REM === Helper routines REM === REM ========================================================================================= :CrossgenFailure exit /b 1 :Usage echo. echo Build the CoreCLR repo. echo. echo Usage: echo build.cmd [option1] [option2] echo or: echo build.cmd all [option1] [option2] -- ... echo. echo All arguments are optional. The options are: echo. echo.-? -h -help --help: view this message. echo -all: Builds all configurations and platforms. echo Build architecture: one of -x64, -x86, -arm, -arm64 ^(default: -x64^). echo Build type: one of -Debug, -Checked, -Release ^(default: -Debug^). echo -- ... : all arguments following this tag will be passed directly to msbuild. echo mscorlib version: one of -freebsdmscorlib, -linuxmscorlib, -netbsdmscorlib, -osxmscorlib, echo or -windowsmscorlib. If one of these is passed, only System.Private.CoreLib is built, echo for the specified platform ^(FreeBSD, Linux, NetBSD, OS X or Windows, echo respectively^). echo add nativemscorlib to go further and build the native image for designated mscorlib. echo -toolset_dir ^