diff options
Diffstat (limited to 'build.cmd')
| -rw-r--r-- | build.cmd | 67 |
1 files changed, 6 insertions, 61 deletions
@@ -173,7 +173,6 @@ if /i "%1" == "-pgoinstrument" (set __PgoInstrument=1&set processedArgs=!p if /i "%1" == "-enforcepgo" (set __EnforcePgo=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-nopgooptimize" (set __PgoOptimize=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "-ibcinstrument" (set __IbcTuning=/Tuning&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) -if /i "%1" == "-toolset_dir" (set __ToolsetDir=%2&set __PassThroughArgs=%__PassThroughArgs% %2&set processedArgs=!processedArgs! %1 %2&shift&shift&goto Arg_Loop) if /i "%1" == "-crossgenaltjit" (set __CrossgenAltJit=%2&set processedArgs=!processedArgs! %1 %2&shift&shift&goto Arg_Loop) REM TODO these are deprecated remove them eventually @@ -197,7 +196,6 @@ if /i "%1" == "pgoinstrument" (set __PgoInstrument=1&set processedArgs=!pr if /i "%1" == "nopgooptimize" (set __PgoOptimize=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "enforcepgo" (set __EnforcePgo=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) if /i "%1" == "ibcinstrument" (set __IbcTuning=/Tuning&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop) -if /i "%1" == "toolset_dir" (set __ToolsetDir=%2&set __PassThroughArgs=%__PassThroughArgs% %2&set processedArgs=!processedArgs! %1 %2&shift&shift&goto Arg_Loop) if [!processedArgs!]==[] ( set __UnprocessedBuildArgs=%__args% @@ -327,7 +325,7 @@ REM ============================================================================ @if defined _echo @echo on -@call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\build.proj -generateHeaderWindows -NativeVersionHeaderFile="%__RootBinDir%\obj\_version.h" %__RunArgs% %__UnprocessedBuildArgs% +call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\build.proj -generateHeaderWindows -NativeVersionHeaderFile="%__RootBinDir%\obj\_version.h" %__RunArgs% %__UnprocessedBuildArgs% REM ========================================================================================= REM === @@ -337,7 +335,7 @@ REM ============================================================================ if %__RestoreOptData% EQU 1 if %__BuildTypeRelease% EQU 1 ( echo %__MsgPrefix%Restoring the OptimizationData Package - @call %__ProjectDir%\run.cmd build -optdata %__RunArgs% %__UnprocessedBuildArgs% + call %__ProjectDir%\run.cmd build -optdata %__RunArgs% %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: Failed to restore the optimization data package. exit /b 1 @@ -430,16 +428,6 @@ if %__BuildNative% EQU 1 ( echo %__MsgPrefix%Commencing build of native components for %__BuildOS%.%__BuildArch%.%__BuildType% - set __NativePlatformArgs=-platform=%__BuildArch% - if not "%__ToolsetDir%" == "" ( set __NativePlatformArgs=-useEnv ) - - if not "%__ToolsetDir%" == "" ( - rem arm64 builds currently use private toolset which has not been released yet - REM TODO, remove once the toolset is open. - call :PrivateToolSet - goto GenVSSolution - ) - :: Set the environment for the native build set __VCBuildArch=x86_amd64 if /i "%__BuildArch%" == "x86" ( set __VCBuildArch=x86 ) @@ -466,7 +454,6 @@ if %__BuildNative% EQU 1 ( ) if not exist "!VSINSTALLDIR!DIA SDK" goto NoDIA -:GenVSSolution if defined __SkipConfigure goto SkipConfigure echo %__MsgPrefix%Regenerating the Visual Studio solution @@ -493,7 +480,7 @@ if %__BuildNative% EQU 1 ( set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! - @call %__ProjectDir%\run.cmd build -Project=%__IntermediatesDir%\install.vcxproj -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! -configuration=%__BuildType% %__NativePlatformArgs% %__RunArgs% -MSBuildNodeCount="/m:2" %__UnprocessedBuildArgs% + call %__ProjectDir%\run.cmd build -Project=%__IntermediatesDir%\install.vcxproj -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! -configuration=%__BuildType% -platform=%__BuildArch% %__RunArgs% -MSBuildNodeCount="/m:2" %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: native component build failed. Refer to the build log files for details: @@ -555,7 +542,7 @@ if /i "%__DoCrossArchBuild%"=="1" ( set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! - @call %__ProjectDir%\run.cmd build -Project=%__CrossCompIntermediatesDir%\install.vcxproj -configuration=%__BuildType% -platform=%__CrossArch% -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! %__RunArgs% -MSBuildNodeCount="/m:2" %__UnprocessedBuildArgs% + call %__ProjectDir%\run.cmd build -Project=%__CrossCompIntermediatesDir%\install.vcxproj -configuration=%__BuildType% -platform=%__CrossArch% -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! %__RunArgs% -MSBuildNodeCount="/m:2" %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: cross-arch components build failed. Refer to the build log files for details: @@ -614,7 +601,7 @@ if %__BuildCoreLib% EQU 1 ( set __MsbuildWrn=/flp1:WarningsOnly;LogFile=!__BuildWrn! set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! - @call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\build.proj -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! !__nugetBuildArgs! %__RunArgs% !__ExtraBuildArgs! %__UnprocessedBuildArgs% + call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\build.proj -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! !__nugetBuildArgs! %__RunArgs% !__ExtraBuildArgs! %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: System.Private.CoreLib build failed. Refer to the build log files for details: @@ -718,7 +705,7 @@ if %__BuildPackages% EQU 1 ( set __MsbuildErr=/flp2:ErrorsOnly;LogFile=!__BuildErr! REM The conditions as to what to build are captured in the builds file. - @call %__ProjectDir%\run.cmd build -Project=%__SourceDir%\.nuget\packages.builds -platform=%__BuildArch% -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! %__RunArgs% %__UnprocessedBuildArgs% + call %__ProjectDir%\run.cmd build -Project=%__SourceDir%\.nuget\packages.builds -platform=%__BuildArch% -MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr! %__RunArgs% %__UnprocessedBuildArgs% if not !errorlevel! == 0 ( echo %__MsgPrefix%Error: Nuget package generation failed build failed. Refer to the build log files for details: @@ -741,12 +728,6 @@ REM ============================================================================ if %__BuildTests% EQU 1 ( echo %__MsgPrefix%Commencing build of tests for %__BuildOS%.%__BuildArch%.%__BuildType% - REM Construct the arguments to pass to the test build script. - - rem arm64 builds currently use private toolset which has not been released yet - REM TODO, remove once the toolset is open. - if not "%__ToolsetDir%" == "" call :PrivateToolSet - set NEXTCMD=call %__ProjectDir%\build-test.cmd %__BuildArch% %__BuildType% %__UnprocessedBuildArgs% echo %__MsgPrefix%!NEXTCMD! !NEXTCMD! @@ -758,12 +739,6 @@ if %__BuildTests% EQU 1 ( ) else if %__GenerateLayout% EQU 1 ( echo %__MsgPrefix%Generating layout for %__BuildOS%.%__BuildArch%.%__BuildType% - REM Construct the arguments to pass to the runtest build script. - - rem arm64 builds currently use private toolset which has not been released yet - REM TODO, remove once the toolset is open. - if not "%__ToolsetDir%" == "" call :PrivateToolSet - set NEXTCMD=call %__ProjectDir%\tests\runtest.cmd %__BuildArch% %__BuildType% GenerateLayoutOnly %__UnprocessedBuildArgs% echo %__MsgPrefix%!NEXTCMD! !NEXTCMD! @@ -890,7 +865,6 @@ echo or -windowsmscorlib. If one of these is passed, only System.Private.Cor echo for the specified platform ^(FreeBSD, Linux, NetBSD, OS X or Windows, echo respectively^). echo add nativemscorlib to go further and build the native image for designated mscorlib. -echo -toolset_dir ^<dir^> : set the toolset directory -- Arm64 use only. Required for Arm64 builds. echo -nopgooptimize: do not use profile guided optimizations. echo -enforcepgo: verify after the build that PGO was used for key DLLs, and fail the build if not echo -pgoinstrument: generate instrumented code for profile guided optimization enabled binaries. @@ -932,32 +906,3 @@ echo Visual Studio Express does not include the DIA SDK. ^ You need Visual Studio 2015 or 2017 (Community is free). echo See: https://github.com/dotnet/coreclr/blob/master/Documentation/project-docs/developer-guide.md#prerequisites exit /b 1 - -:PrivateToolSet - -echo %__MsgPrefix%Setting up the usage of __ToolsetDir:%__ToolsetDir% - -if /i "%__ToolsetDir%" == "" ( - echo %__MsgPrefix%Error: A toolset directory is required for the Arm64 Windows build. Use the toolset_dir argument. - exit /b 1 -) - -if not exist "%__ToolsetDir%"\buildenv_arm64.cmd goto :Not_EWDK -call "%__ToolsetDir%"\buildenv_arm64.cmd -exit /b 0 - -:Not_EWDK -set PATH=%__ToolsetDir%\VC_sdk\bin;%PATH% -set LIB=%__ToolsetDir%\VC_sdk\lib\arm64;%__ToolsetDir%\sdpublic\sdk\lib\arm64 -set INCLUDE=^ -%__ToolsetDir%\VC_sdk\inc;^ -%__ToolsetDir%\sdpublic\sdk\inc;^ -%__ToolsetDir%\sdpublic\shared\inc;^ -%__ToolsetDir%\sdpublic\shared\inc\minwin;^ -%__ToolsetDir%\sdpublic\sdk\inc\ucrt;^ -%__ToolsetDir%\sdpublic\sdk\inc\minwin;^ -%__ToolsetDir%\sdpublic\sdk\inc\mincore;^ -%__ToolsetDir%\sdpublic\sdk\inc\abi;^ -%__ToolsetDir%\sdpublic\sdk\inc\clientcore;^ -%__ToolsetDir%\diasdk\include -exit /b 0 |