Age | Commit message (Collapse) | Author | Files | Lines |
|
alarm uses time values as 64bit integer
Change-Id: Ifc000094da6f3e5d78ea60c144b681284e06cf69
Signed-off-by: Semun Lee <semun.lee@samsung.com>
|
|
|
|
Change-Id: I52f95964f82a88389e98592c64bf4820c1da5887
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Description: The service will be always allocated when append_properties()
is called, so this NULL check is not required.
This NULL check generates SVACE warning which is actually a FALSE alarm.
Change-Id: I9b3a15529f6614cb375b8fb7ec656a3c44eeb180
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
Description: This is incomplete solution becase there's
no defined way to connect to DPP AP for upstream connman
for current patch
Change-Id: Ia6a3188e2826708c2123d209249d8b59fb5a42dc
Signed-off-by: Yu jiung <jiung.yu@samsung.com>
|
|
Added support to enable/disable Auto-IP option using main.conf
Change-Id: Iea1cae5a28681a90a5f79735c7374791a227feb7
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: Idb47c1ddbedc9f97181b8e9a5eeac04ddd832a2c
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
DisconnectionRequested changes" into tizen
|
|
into tizen
|
|
changes
Description: The properties perform below tasks:-
1. ConnectReason: To identify whether connection was an autoconnection or user initiated.
2. DisconnectionRequested: To identify whether disconnection was user initiated or not.
Change-Id: I2ba4fc4637673571745517cdc33fc3a6d6367953
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
Fixed the case where the ConnMan is changed to Idle state without going through Disconnect state in Connected state.
* Disconnect state indicates that it is going to terminate the current connection and will return to the Idle state.
Change-Id: I81becdd043d599df4257d30c94ce2a2038f72b2d
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
This patch reduced the SignalPoll monitor from 30 second to 10 second frequency.
This patch also extracts already available parameter strength/RSSI in SignalPoll
and update connected service's RSSI/Strength accordingly.
Change-Id: Ie9bbb21bf50ad0b8c72e3ca2fc9f7f6500c77f23
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
|
|
Change-Id: I19f09647b7471f146adb95bc7e81fd9ab11f18ac
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
|
|
Change-Id: Ibd82d445a8c0bd80a9b0804dd3d8b639797f8cb2
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
|
|
Change-Id: Ib8014d9ff53d896a12d0bf985168b7df589d9f22
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: I03ab90b8ab78e489d1ef70fbec57f10576860a57
Signed-off-by: Yu jiung <jiung.yu@samsung.com>
|
|
Service and Socket unit has an implicit dependencies.
Refre: https://www.freedesktop.org/software/systemd/man/systemd.socket.html
"Socket units automatically gain a Before= dependency on the service units they activate."
Change-Id: I97710fb27fd3294332283a8bffde0d3765b4428e
|
|
net-config.service has "After=net-config.service" dependency.
But net-config.service don't have DefaultDependencies=no.
So "DefaultDependencies=no" does not have any effect on connman.service, but instead it is confusing.
Change-Id: I6a3c78f18c3029314c2a8c0e6b8c72e65c868fe8
|
|
Change-Id: Ib5957e7ee3a9315ee86a331189bc3e9e71751ee8
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
|
|
Change-Id: Ie95d9be974d685f0601b2a6592c5f2d45e88fdd7
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: I5cbc48dfe7ab4f4402d04fdb5ebba1d220e457a6
|
|
Change-Id: I8612c52dc0cc078459fa19aa8a639597f070b293
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
1. Supports up to 8 BSSIDs per each SSID
2. Attempt to connect only once per each BSSID
3. Sorted by signal strength and try to connect in sorted order
4. Sets the correct frequency for each bssid.
Change-Id: I668fff29f2df99b2e5f637a39b5c70da84f8ee1c
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
Added support to get Max number of SSIDs scan supported by wlan chipset.
Change-Id: If4cbc07f6937718fab123600a962179b3adbc081
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
When there are multiple APs with the same SSID and security,
this patch support below features:
1. If AP does not respond to probe request during connection
procedure, connman tries to connect with the next available BSSID
before sending disconnected event to application.
2. If connection with AP is failed during association due to
ASSOC_REJECT, connman tries to connect with the next available BSSID
before sending disconnected event to application.
Change-Id: Ie80939bd013a12b9c88e91a1fd5a05fbb57c1833
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: Ie53230568c290b1449e145e9c77f36cfc1af8a03
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
Change-Id: I84e9c9a7719e017892d4f353cf141901ca94beb8
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
Change-Id: I9558c05c45ec0327e15377efb61f3f19592e75af
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
Change-Id: I5b3ae0a5305db81aeba848e5d7353ca44522f35c
|
|
|
|
Change-Id: Ib3b189615648a35aa876eab3e3f61c47ac0c1e68
Signed-off-by: Abhishek Sansanwal <abhishek.s94@samsung.com>
|
|
Returning -1 in a function with bool as return value is the same as
returning true. Change to false to indicate error if inet_aton() fails.
Change-Id: I3dea40bc2506b1a2a0a65e7e838691fc3af957bd
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
|
|
|
|
This patch appends the IEEE 802.11b/g/n/a/ac PHY
protocol modes of scanned Access Points
using internal logic.
Following logic is used to determine WLAN HW protocol:-
1) If “Supported rates” is only till 11 Mbps, and frequency is in
2.4GHz band, then protocol is 802.11B.
2) If “Supported rates” is till 54Mbps or “Extended supported rates”
are present, and frequency is in 2.4GHz band, then protocol is 802.11G.
3) If “Supported rates” is only till 54 Mbps, frequency is in 5GHz
band , then protocol is 802.11A.
4) If “HT capabilities” is supported , then protocol is 802.11N.
5) If “HT capabilities” & “VHT” is supported and frequency is in 5 GHz
band, then protocol is 802.11AC.
Change-Id: I1156ef249cf4a8052a883d31da66788c7d2de22f
|
|
This patch changes the internal logic of getting
max speed from connected AP.
Change-Id: I7191a09f1d974f1158ce9440cfa6924feca61340
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
|
|
Added support to update EAP manual IP setting using
wifi_manager_update_ap()
Change-Id: Ifa331ec3b1e4bd95262f63698d32f65e6128518c
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
|
|
Change-Id: I2f6b6233ac682959abd1221a61aaeffa5bdfdd63
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
1. Modified the priority of default connection
2. Disconnect the cellular when wifi state is online
3. Added a dbus-api for downgrading the wifi state to ready
4. Modified the connman_service_get_default_connection()
Change-Id: Ie062d86479a9bc80919ba7d0c168028f61a9c7be
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
Change-Id: Iec2ec99fb7d4fc6d9c0539e5a9e7c903e1969580
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
freed in icmpv6_event()
Change-Id: I19b028f5a93f7a4efbcf6e7c92113c363d7bb534
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
|
|
Description :
1. App send anonymous identity and connect with EAP network.
And connman store it inside corresponding network pointer.
2. Then if user disconnect that connection,forgetAP will be called.
And connman does not clear last anonymous identity data for that service.
3. Next time when user again connect with same EAP network, but without anonymous identity.
Then previous anonymous identity will be passwed to WPA suplicant. But blank anonymous identity should be treated.
Change-Id: I267bea4d394390e82351ae997229c69785ea6d6d
Signed-off-by: Bhaskar Dutta <bhaskar.d@samsung.com>
|
|
When AP is connected using WPS without SSID then its password needs to
be saved for future autoconnection
Change-Id: I7d771c14867e19c379ff4bba262f10a2fb578c17
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
Below are few of the valgrind outputs:
==2694== 7,484 (576 direct, 6,908 indirect) bytes in 72 blocks are definitely lost in loss record 196 of 197
==2694== at 0x48458A4: malloc (vg_replace_malloc.c:299)
==2694== by 0x48C11B3: g_malloc (gmem.c:94)
==2694== by 0x48DA4A3: g_slice_alloc (gslice.c:1025)
==2694== by 0x48DBA13: g_slist_append (gslist.c:213)
==2694== by 0x12EF29: g_supplicant_network_get_wifi_vsie(supplicant.c:1605)
==2694== by 0x127097: network_added (wifi.c:3447)
==2694== by 0x12A41D: callback_network_added (supplicant.c:624)
==2694== by 0x12A41D: add_or_replace_bss_to_network(supplicant.c:1967)
==2694== by 0x12B9C9: interface_bss_added_with_keys(supplicant.c:2457)
==2694== by 0x12B9C9: signal_bss_added (supplicant.c:3106)
==2694== by 0x12AF1D: g_supplicant_filter (supplicant.c:4045)
==2694== by 0x49904EB: dbus_connection_dispatch (in/usr/lib/libdbus-1.so.3.14.6)
==2694== by 0x18E921: message_dispatch (mainloop.c:76)
==2694== by 0x48BB8E7: g_main_dispatch (gmain.c:3234)
==2694== by 0x48BB8E7: g_main_context_dispatch (gmain.c:3887)
==2694== 1,980 (304 direct, 1,676 indirect) bytes in 38 blocks are definitely lost in loss record 187 of 197
==2694== at 0x48458A4: malloc (vg_replace_malloc.c:299)
==2694== by 0x48C11B3: g_malloc (gmem.c:94)
==2694== by 0x48DA4A3: g_slice_alloc (gslice.c:1025)
==2694== by 0x48DBA13: g_slist_append (gslist.c:213)
==2694== by 0x128D3F: update_bssid_list (supplicant.c:1637)
==2694== by 0x48A989F: g_hash_table_foreach (ghash.c:1610)
==2694== by 0x12EF91: g_supplicant_network_get_bssid_list(supplicant.c:1649)
==2694== by 0x127177: network_added (wifi.c:3489)
==2694== by 0x1294D5: callback_network_added (supplicant.c:624)
==2694== by 0x1294D5: scan_network_update (supplicant.c:2810)
==2694== by 0x130151: supplicant_dbus_array_foreach (dbus.c:106)
==2694== by 0x1298E3: scan_bss_data (supplicant.c:2824)
==2694== by 0x130071: property_get_reply (dbus.c:273)
==2694== 28 bytes in 2 blocks are definitely lost in loss record 87 of 197
==2694== at 0x48458A4: malloc (vg_replace_malloc.c:299)
==2694== by 0x48C11B3: g_malloc (gmem.c:94)
==2694== by 0x48DBF03: g_strdup (gstrfuncs.c:363)
==2694== by 0x12A65B: merge_network (supplicant.c:1737)
==2694== by 0x12A7D9: network_property (supplicant.c:1758)
==2694== by 0x12A7D9: interface_network_added (supplicant.c:1808)
==2694== by 0x12AF1D: g_supplicant_filter (supplicant.c:4045)
==2694== by 0x49904EB: dbus_connection_dispatch (in /usr/lib/libdbus-1.so.3.14.6)
==2694== by 0x18E921: message_dispatch (mainloop.c:76)
==2694== by 0x48BB8E7: g_main_dispatch (gmain.c:3234)
==2694== by 0x48BB8E7: g_main_context_dispatch (gmain.c:3887)
==2694== by 0x48BBC77: g_main_context_iterate.isra.30 (gmain.c:3960)
==2694== by 0x48BBFD7: g_main_loop_run (gmain.c:4156)
==2694== by 0x119391: main (main.c:851)
Change-Id: I3d86724c44b1593e5444a65eb7519bc150e50ee5
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
This patch sends the list of BSSID, signal strength and
frequency of an APs having same SSID and Security type.
Change-Id: I368d37de310687ca173418dfad91fae7082b2357
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
|