Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ie59288fededb1bb7a09d234d8300e6893fab99c1
Signed-off-by: Cheoleun Moon <chleun.moon@samsung.com>
|
|
Change-Id: I8fc3c40c8a2cf3d9e5fb840796d0f0bf0b66a072
Signed-off-by: Cheoleun Moon <chleun.moon@samsung.com>
|
|
Change-Id: I2208cf0923a66c78551ac2eb13933735afe33604
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
|
|
Description: In following use case, disconnect reason code was not getting reset.
1. Connect With AP
2. Change the Password of AP
3. Check the Disconnect Reason using CAPI
4. Connect again with AP with New Password
5. Check the Disconnect Reason again : It was showing 3 in place of 0.
Change-Id: I1b1542b69ac270811ad789a4f662836241b6bf34
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
|
|
scan" into tizen
|
|
Earlier full scan was done using throw_wifi_scan() which increases
device reference count. As we need to perform full scan then we should
directly call g_supplicant_interface_scan() without increasing the
device ref count.
Change-Id: Icb595ca714d5bf03ed0a071fcd987f9bc1b736dc
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
|
|
into tizen
|
|
|
|
This reverts commit 1141e83b5a00d11bada4e07e8203770b3d36939b.
Change-Id: I0abf48d5c45cdf16f33345fb7432ceaab4051a11
|
|
Change-Id: I70b15db8ba90fc18410072f0017f04413662cde6
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
|
|
Change-Id: Ief1a868d989cb2cc78bb55980e3d8bee03a4a42b
Signed-off-by: Cheoleun Moon <chleun.moon@samsung.com>
|
|
Change-Id: Ie9cdabbddba37fab987ec48402e7d7508949f040
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Device reference count is referenced when scanning is set to true, so it
should be dereferenced only when scanning is set to false, In one
particular case scanning was not being set to false while device was
unreferenced when wifi->allow_full_scan is true.
Change-Id: Ib8fc675d224eddc8e1dfa4a4a271f7c5b64209fe
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
If the response query string is malformed, we might access memory
pass the end of "name" variable in parse_response().
Change-Id: I179583bd9f7682a49a2980d866ae3524d1b75879
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
This is a quick fix for the issue where removal of an interface may
cause IPv6 to be disabled/enabled on other interfaces.
When removing an ipdevice in free_ipdevice(), it is ensured that the
ifname (which we get from connman_inet_ifname()) is not NULL,
before invoking set_ipv6_state(). If a NULL ifname is passed into
set_ipv6_state(), it will apply the change to all interfaces instead
of the intended one.
Change-Id: I2b0b6494e3c2d4a80e7a8e2012f274987f6e8142
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
|
|
Change-Id: I34e42d98ab540ffb75e0ae860fb1b615ef2bddcb
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
|
|
|
|
|
|
Description: If an application request for wifi scan
and it gets failed, then send error code only to the
requesting application.
Change-Id: I90bc3b0af68e9d3ff5c2e4709f5788c1f107a854
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: Ie3faef9d95d95cbcfbd222d92f25e6eae8e41581
Signed-off-by: Cheoleun Moon <chleun.moon@samsung.com>
|
|
Description: In this patch added below changes-
1. Notify ScanDone signal with scan-type info.
2. If scanning is in-progress at connman return
error 'InProgress' to application.
Change-Id: If8427e185dd0ad811c1d1de72254f073babebbbf
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
|
|
RW update script for Tizen 2.4 (to 3.0) is not necessary in Tizen 4.0.
(Tizen 4.0 does not support upgrade from Tizen 2.4)
Remove this file in terms of clearing the redundancy.
Change-Id: I0ce9b8ccb0d9a0720bbe7588f97da7fe8b0ce522
|
|
|
|
gnutls dependency is only required when wispr is enabled. Currently
connman is build with flag --disable-wispr so gnutls is not required.
This patch removes gnutls dependency from spec file.
We'll find alternative for gnutls later and add that together with
patches related to captive portal
Change-Id: I23491ec67c365b4bc89c6231cc0a581431208f5a
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
Change-Id: I4366e1bf8e72b481becb0c16256e7a708924c7c3
Signed-off-by: cheoleun <chleun.moon@samsung.com>
|
|
Change-Id: Id58b1038e689f24c42d8cfdccfd59162988626fd
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
|
|
Change-Id: I4e7f65898fe824cd589b0a4dfa6b7b506b88a51a
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
|
|
Change-Id: I5cfd797e298386e80f407a6bfeba8b2cb7adfadb
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
|
|
Change-Id: I2156778ed0bcc703e8823c7eccaf344ab21503c1
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
|
|
Change-Id: Ib8f446164242caeb7fbc29c2917eff4b8a5b8bf7
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: I8e1b366bc0973ec60ab24aa486c877b330b5de82
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Change-Id: I560be68a876a5fef516647365db3c56761f2aba1
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
<allow send_type="signal"/> can affect every other process(uid root or network_fw),
This can cause abnormal behavior against other dbus services.
So, remove this rule from dbus conf.
Sending signal to net.connman is allowed by this rule,
'<allow send_destination="net.connman"/>'
After all, there are no behavior changes.
Change-Id: I7668deeaa33ae14181c64d0a85a049fa2387657b
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
|
|
Change-Id: I0727c24f30be5162d27e49996dfa376348f98527
Signed-off-by: Abhishek Sansanwal <abhishek.s94@samsung.com>
|
|
Change-Id: Ifc1e9e5d28fa2f58a0e7f98677daf08e4e3de161
Signed-off-by: cheoleun <chleun.moon@samsung.com>
|
|
Change-Id: Ia4bb6ae4d712e33933b79e1df284a06c3922befa
Signed-off-by: cheoleun <chleun.moon@samsung.com>
|
|
Change-Id: I5253fda2f7eddc377bbd6f38dc81934ce7f035df
|
|
Change-Id: I2040f2cec9d3768da6c7329819a4a710882bc18e
Signed-off-by: cheoleun <chleun.moon@samsung.com>
|
|
Change-Id: I0d0afacc8a11fadc8128f6eef3f64f7a4ca8675b
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
|
|
Application." into tizen
|
|
|
|
Description: Earlier, connMan was modified the RSSI value received
from supplicant using following formula.
if (strength > 100)
strength = 100;
Change-Id: Ifa4fb2be6f65224046274835c9ae26a81fae2e69
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
|
|
The struct of xtables_globals has been modified in iptables 1.6.
If connman runs with iptables 1.6, it can crash.
Program received signal SIGSEGV, Segmentation fault.
0x00000000 in ?? ()
0xb7dea89c in xtables_find_target () from /usr/lib/libxtables.so.11
0xb7deac1c in ?? () from /usr/lib/libxtables.so.11
0xb7dea793 in xtables_find_target () from /usr/lib/libxtables.so.11
The the missing function item of xtables is added to xtables_globals.
Commit ID: acea08a0e4234a4c1a87bedc087c73ff36de0c7b
Change-Id: I670e100d816636d705d967ba69b3cb72c26d889e
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
|
|
Change-Id: I5e1b30061271baace51e31da973dbc5298a5341f
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
platform." into tizen
|
|
Change-Id: Ib74170f4c5be93f4ba6df56436dac227352b76ef
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
|
|
Description: This patch appends the raw ssid
in bytes to GetServices method call.
Change-Id: I0fdbfba4bcf0860fff02c4edd34559154fd0b8eb
Signed-off-by: Milind Ramesh Murhekar <m.murhekar@samsung.com>
|