Add main.conf for robot profilesubmit/tizen/20220414.094032accepted/tizen/unified/20220415.130340

Change-Id: Ifa2f0c8ab1bbb5925bc468206ed0fe0c8b743489
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>

2 files changed, 251 insertions, 0 deletions

diff --git a/packaging/connman.spec b/packaging/connman.spec
index 8fbb03d1..3f73b7b1 100644
--- a/packaging/connman.spec
+++ b/packaging/connman.spec
@@ -227,6 +227,7 @@ mkdir -p %{buildroot}/etc/connman
 cp src/main_ivi.conf %{buildroot}/etc/connman/main.conf.ivi
 cp src/main_tv.conf %{buildroot}/etc/connman/main.conf.tv
 cp src/main_disable_eth.conf %{buildroot}/etc/connman/main.conf.disable.eth
+cp src/main_robot.conf %{buildroot}/etc/connman/main.conf.robot
 cp src/main.conf %{buildroot}/etc/connman/main.conf
 
 rm %{buildroot}%{_sysconfdir}/dbus-1/system.d/*.conf
@@ -343,7 +344,9 @@ mv -f %{_sysconfdir}/connman/main.conf.disable.eth %{_sysconfdir}/connman/main.c
 
 %post profile_robot
 mv %{_sysconfdir}/dbus-1/system.d/connman-robot.conf %{_sysconfdir}/dbus-1/system.d/connman.conf
+mv -f %{_sysconfdir}/connman/main.conf.robot %{_sysconfdir}/connman/main.conf
 
 %files profile_robot
 %manifest %{name}.manifest
 %attr(644,root,root) %{_sysconfdir}/dbus-1/system.d/connman-robot.conf
+%attr(644,network_fw,network_fw) %{_sysconfdir}/connman/main.conf.robot
diff --git a/src/main_robot.conf b/src/main_robot.conf
new file mode 100755
index 00000000..f2b84b55
--- /dev/null
+++ b/src/main_robot.conf
@@ -0,0 +1,248 @@
+[General]
+
+# Set input request timeout. Default is 120 seconds
+# The request for inputs like passphrase will timeout
+# after certain amount of time. Use this setting to
+# increase the value in case of different user
+# interface designs.
+# InputRequestTimeout = 120
+
+# Set browser launch timeout. Default is 300 seconds
+# The request for launching a browser for portal pages
+# will timeout after certain amount of time. Use this
+# setting to increase the value in case of different
+# user interface designs.
+# BrowserLaunchTimeout = 300
+
+# If wifi is disconnected, the background scanning will follow a simple
+# backoff mechanism from 3s up to 5 minutes. Then, it will stay in 5
+# minutes unless user specifically asks for scanning through a D-Bus
+# call. If so, the mechanism will start again from 3s. This feature
+# activates also the background scanning while being connected, which
+# is required for roaming on wifi.
+# When BackgroundScanning is false, ConnMan will not perform any scan
+# regardless of wifi is connected or not, unless it is requested by
+# the user through a D-Bus call.
+# BackgroundScanning = true
+BackgroundScanning = false
+
+# Assume that service gateways also function as timeservers.
+# UseGatewaysAsTimeservers = false
+
+# List of Fallback timeservers separated by ",".
+# These timeservers are used for NTP sync when there are
+# no timeservers set by the user or by the service, and
+# when UseGatewaysAsTimeservers = false. These can contain
+# mixed combination of fully qualified domain names, IPv4
+# and IPv6 addresses.
+# FallbackTimeservers =
+#FallbackTimeservers = pool.ntp.org
+
+# List of fallback nameservers separated by "," used if no
+# nameservers are otherwise provided by the service. The
+# nameserver entries must be in numeric format, host
+# names are ignored.
+# FallbackNameservers =
+
+# List of technologies that are marked autoconnectable
+# by default, separated by commas ",". The default value
+# for this entry when empty is ethernet,wifi,cellular.
+# Services that are automatically connected must have been
+# set up and saved to storage beforehand.
+# DefaultAutoConnectTechnologies =
+
+# List of preferred technologies from the most preferred
+# one to the least preferred one separated by commas ",".
+# Services of the listed technology type will be tried one
+# by one in the order given, until one of them gets connected
+# or they are all tried. A service of a preferred technology
+# type in state 'ready' will get the default route when
+# compared to another preferred type further down the list
+# with state 'ready' or with a non-preferred type; a service
+# of a preferred technology type in state 'online' will get
+# the default route when compared to either a non-preferred
+# type or a preferred type further down in the list.
+# PreferredTechnologies =
+PreferredTechnologies = wifi, ethernet
+
+# List of blacklisted network interfaces separated by ",".
+# Found interfaces will be compared to the list and will
+# not be handled by ConnMan, if their first characters
+# match any of the list entries. Default value is
+# vmnet,vboxnet,virbr,ifb,ve-,vb-.
+# NetworkInterfaceBlacklist = vmnet,vboxnet,virbr,ifb,ve-,vb-
+NetworkInterfaceBlacklist = veth,vmnet,vboxnet,virbr,usb,rndis,rmnet,rev_rmnet,dummy,seth_td,seth_w
+
+# Allow ConnMan to change the system hostname. This can
+# happen for example if we receive DHCP hostname option.
+# Default value is true.
+# AllowHostnameUpdates = true
+
+# Allow ConnMan to change the system domainname. This can
+# happen for example if we receive DHCP domainname option.
+# Default value is true.
+# AllowDomainnameUpdates = true
+
+# Keep only a single connected technology at any time. When a new
+# service is connected by the user or a better one is found according
+# to PreferredTechnologies, the new service is kept connected and all
+# the other previously connected services are disconnected. With this
+# setting it does not matter whether the previously connected services
+# are in 'online' or 'ready' states, the newly connected service is
+# the only one that will be kept connected. A service connected by the
+# user will be used until going out of network coverage. With this
+# setting enabled applications will notice more network breaks than
+# normal. Default value is false.
+# SingleConnectedTechnology = false
+SingleConnectedTechnology = false
+
+# List of technologies for which tethering is allowed separated by ",".
+# The default value is wifi,bluetooth,gadget. Only those technologies
+# listed here are used for tethering. If ethernet tethering is desired,
+# then ethernet should be added to the list. The technologies listed here
+# have to support tethering, currently tethering is implemented for wifi,
+# bluetooth, gadget and ethernet.
+# NOTE that if ethernet tethering is enabled, then a DHCP server is
+# started on all ethernet interfaces. Tethered ethernet should
+# never be connected to corporate or home network as it will disrupt
+# normal operation of these networks. Due to this ethernet is not
+# tethered by default. Do not activate ethernet tethering unless you
+# really know what you are doing.
+# TetheringTechnologies = wifi,bluetooth,gadget
+
+# Restore earlier tethering status when returning from offline mode,
+# re-enabling a technology, and after restarts and reboots.
+# Default value is false.
+# PersistentTetheringMode = false
+
+# Automatically enable Anycast 6to4 if possible. This is not recommended, as
+# the use of 6to4 will generally lead to a severe degradation of connection
+# quality. See RFC6343. Default value is false (as recommended by RFC6343
+# section 4.1).
+# Enable6to4 = false
+
+# Enable use of http get as on online status check.
+# When a service is in a READY state, and is selected as default,
+# ConnMan will issue an HTTP GET request to verify that end-to-end
+# connectivity is successful. Only then the service will be
+# transitioned to ONLINE state.
+# If this setting is false, the default service will remain in READY state.
+# Default value is true.
+# EnableOnlineCheck = false
+
+# Range of intervals between two online check requests.
+# When an online check request fails, another one is triggered after a
+# longer interval. The intervals follow the power of two series of numbers
+# between OnlineCheckInitialInterval and OnlineCheckMaxInterval.
+# Default range is [1, 12], corresponding to the following intervals, in
+# seconds: 1, 4, 9, 16, 25, 36, 49, 64, 81, 100, 121 and 144.
+# OnlineCheckInitialInterval = 1
+# OnlineCheckMaxInterval = 12
+
+# WARNING: Experimental feature!!!
+# In addition to EnableOnlineCheck setting, enable or disable use of HTTP GET
+# to detect the loss of end-to-end connectivity.
+# If this setting is false, when the default service transitions to ONLINE
+# state, the HTTP GET request is no more called until next cycle, initiated
+# by a transition of the default service to DISCONNECT state.
+# If this setting is true, the HTTP GET request keeps beeing called to guarantee
+# that end-to-end connectivity is still successful. If not, the default service
+# will transition to READY state, enabling another service to become the
+# default one, in replacement.
+# EnableOnlineToReadyTransition = false
+
+# List of technologies with AutoConnect = true which are always connected
+# regardless of PreferredTechnologies setting. Default value is empty and
+# will connect a technology only if it is at a higher preference than any
+# other which is already connected.
+# This setting has no effect if SingleConnectedTechnologies is enabled.
+# AlwaysConnectedTechnologies =
+
+# Allow connman to add service gateway to the time server list.
+# Default value is false.
+# UseGatewaysAsTimeservers = false
+
+# Enable auto connection of services in roaming.
+# If this setting is false, roaming services are not auto-connected by ConnMan.
+# Default value is false.
+# AutoConnectRoamingServices = false
+
+# Enable address conflict detection
+# If this setting is true, ConnMan will send probe ARP packets to see
+# if an IPv4 address is already in use before assigning the address
+# to an interface (in accordance with RFC 5227).
+# Default value is false.
+# AddressConflictDetection = false
+
+NetworkCellularInterfaceList = pdp,rmnet,seth_td,seth_w
+
+# Enable use of link-local address for auto-configuration.
+# When a device fails to get IP address from DHCP server,
+# ConnMan will start link-local address autoconfiguration and
+# assign a link-local IP address to device.
+# If this setting is false and device fails to get IP address
+# from DHCP server then device state will be set to disconnected.
+# Default value is true.
+# EnableAutoIp = false
+
+# Allow connman to set additional global nameserver and it will be used
+# if all nameservers are failed to resolve DNS query. The nameserver
+# entries must be in numeric format.
+# GlobalNameserver = 8.8.8.8
+
+# Enable supplicant debugging log
+ConnmanSupplicantDebug = false
+
+# Save ConnMan log to file
+FileLogging = false
+
+# Use dlog for ConnMan logging
+DlogLogging = true
+
+# Some logs of low importance are omitted to reduce the amount of logs
+SimplifiedLog = true
+
+# This value specifies which will be the default when there are multiple wifi interfaces.
+# Default value is wlan0.
+DefaultWifiInterface = wlan0
+
+# Allow ConnMan to start scan for wifi roaming when SNR and signal are weakened
+# Default value is false.
+# WifiRoamingScan = true
+
+# Allow ConnMan to start wifi roaming when SNR and signal are weakened
+# and there is another BSS in better condition.
+# Default value is false.
+# WifiRoaming = true
+
+
+[INS]
+# INS(Intelligent Network Selection) configuration: BSSID Selection.
+INSPreferredFreqBSSID = 5GHz
+INSPreferredFreqBSSIDScore = 20
+INSLastConnectedBSSID = true
+INSLastConnectedBSSIDScore = 20
+INSAssocReject = true
+INSAssocRejectScore = 10
+INSSignalBSSID = true
+
+# INS(Intelligent Network Selection) configuration: SSID Selection.
+INSLastUserSelection = true
+INSLastUserSelectionTime = 480
+INSLastUserSelectionScore = 30
+# (INSLastUserSelectionTime - selection time diff) / (INSLastUserSelectionTime / INSLastUserSelectionScore)
+# This means '(480 - selection time) / x) <= 30'
+INSLastConnected = true
+INSLastConnectedScore = 30
+INSPreferredFreq = 5GHz
+INSPreferredFreqScore = 60
+INSSecurityPriority = SAE,RSN
+INSSecurityPriorityScore = 5
+# In this case, SAE(10 score), RSN(5 score)
+INSSignal = true
+INSInternet = true
+INSInternetScore = 30
+
+# INS(Intelligent Network Selection) configuration: Common.
+INSSignalLevel3_5GHz = -76
+INSSignalLevel3_24GHz = -74