# Distributed under the OSI-approved BSD 3-Clause License. See accompanying # file Copyright.txt or https://cmake.org/licensing for details. #[=======================================================================[.rst: GoogleTest ---------- This module defines functions to help use the Google Test infrastructure. Two mechanisms for adding tests are provided. :command:`gtest_add_tests` has been around for some time, originally via ``find_package(GTest)``. :command:`gtest_discover_tests` was introduced in CMake 3.10. The (older) :command:`gtest_add_tests` scans source files to identify tests. This is usually effective, with some caveats, including in cross-compiling environments, and makes setting additional properties on tests more convenient. However, its handling of parameterized tests is less comprehensive, and it requires re-running CMake to detect changes to the list of tests. The (newer) :command:`gtest_discover_tests` discovers tests by asking the compiled test executable to enumerate its tests. This is more robust and provides better handling of parameterized tests, and does not require CMake to be re-run when tests change. However, it may not work in a cross-compiling environment, and setting test properties is less convenient. More details can be found in the documentation of the respective functions. Both commands are intended to replace use of :command:`add_test` to register tests, and will create a separate CTest test for each Google Test test case. Note that this is in some cases less efficient, as common set-up and tear-down logic cannot be shared by multiple test cases executing in the same instance. However, it provides more fine-grained pass/fail information to CTest, which is usually considered as more beneficial. By default, the CTest test name is the same as the Google Test name (i.e. ``suite.testcase``); see also ``TEST_PREFIX`` and ``TEST_SUFFIX``. .. command:: gtest_add_tests Automatically add tests with CTest by scanning source code for Google Test macros:: gtest_add_tests(TARGET target [SOURCES src1...] [EXTRA_ARGS arg1...] [WORKING_DIRECTORY dir] [TEST_PREFIX prefix] [TEST_SUFFIX suffix] [SKIP_DEPENDENCY] [TEST_LIST outVar] ) ``gtest_add_tests`` attempts to identify tests by scanning source files. Although this is generally effective, it uses only a basic regular expression match, which can be defeated by atypical test declarations, and is unable to fully "split" parameterized tests. Additionally, it requires that CMake be re-run to discover any newly added, removed or renamed tests (by default, this means that CMake is re-run when any test source file is changed, but see ``SKIP_DEPENDENCY``). However, it has the advantage of declaring tests at CMake time, which somewhat simplifies setting additional properties on tests, and always works in a cross-compiling environment. The options are: ``TARGET target`` Specifies the Google Test executable, which must be a known CMake executable target. CMake will substitute the location of the built executable when running the test. ``SOURCES src1...`` When provided, only the listed files will be scanned for test cases. If this option is not given, the :prop_tgt:`SOURCES` property of the specified ``target`` will be used to obtain the list of sources. ``EXTRA_ARGS arg1...`` Any extra arguments to pass on the command line to each test case. ``WORKING_DIRECTORY dir`` Specifies the directory in which to run the discovered test cases. If this option is not provided, the current binary directory is used. ``TEST_PREFIX prefix`` Specifies a ``prefix`` to be prepended to the name of each discovered test case. This can be useful when the same source files are being used in multiple calls to ``gtest_add_test()`` but with different ``EXTRA_ARGS``. ``TEST_SUFFIX suffix`` Similar to ``TEST_PREFIX`` except the ``suffix`` is appended to the name of every discovered test case. Both ``TEST_PREFIX`` and ``TEST_SUFFIX`` may be specified. ``SKIP_DEPENDENCY`` Normally, the function creates a dependency which will cause CMake to be re-run if any of the sources being scanned are changed. This is to ensure that the list of discovered tests is updated. If this behavior is not desired (as may be the case while actually writing the test cases), this option can be used to prevent the dependency from being added. ``TEST_LIST outVar`` The variable named by ``outVar`` will be populated in the calling scope with the list of discovered test cases. This allows the caller to do things like manipulate test properties of the discovered tests. .. code-block:: cmake include(GoogleTest) add_executable(FooTest FooUnitTest.cxx) gtest_add_tests(TARGET FooTest TEST_SUFFIX .noArgs TEST_LIST noArgsTests ) gtest_add_tests(TARGET FooTest EXTRA_ARGS --someArg someValue TEST_SUFFIX .withArgs TEST_LIST withArgsTests ) set_tests_properties(${noArgsTests} PROPERTIES TIMEOUT 10) set_tests_properties(${withArgsTests} PROPERTIES TIMEOUT 20) For backward compatibility, the following form is also supported:: gtest_add_tests(exe args files...) ``exe`` The path to the test executable or the name of a CMake target. ``args`` A ;-list of extra arguments to be passed to executable. The entire list must be passed as a single argument. Enclose it in quotes, or pass ``""`` for no arguments. ``files...`` A list of source files to search for tests and test fixtures. Alternatively, use ``AUTO`` to specify that ``exe`` is the name of a CMake executable target whose sources should be scanned. .. code-block:: cmake include(GoogleTest) set(FooTestArgs --foo 1 --bar 2) add_executable(FooTest FooUnitTest.cxx) gtest_add_tests(FooTest "${FooTestArgs}" AUTO) .. command:: gtest_discover_tests Automatically add tests with CTest by querying the compiled test executable for available tests:: gtest_discover_tests(target [EXTRA_ARGS arg1...] [WORKING_DIRECTORY dir] [TEST_PREFIX prefix] [TEST_SUFFIX suffix] [NO_PRETTY_TYPES] [NO_PRETTY_VALUES] [PROPERTIES name1 value1...] [TEST_LIST var] [DISCOVERY_TIMEOUT seconds] ) ``gtest_discover_tests`` sets up a post-build command on the test executable that generates the list of tests by parsing the output from running the test with the ``--gtest_list_tests`` argument. Compared to the source parsing approach of :command:`gtest_add_tests`, this ensures that the full list of tests, including instantiations of parameterized tests, is obtained. Since test discovery occurs at build time, it is not necessary to re-run CMake when the list of tests changes. However, it requires that :prop_tgt:`CROSSCOMPILING_EMULATOR` is properly set in order to function in a cross-compiling environment. Additionally, setting properties on tests is somewhat less convenient, since the tests are not available at CMake time. Additional test properties may be assigned to the set of tests as a whole using the ``PROPERTIES`` option. If more fine-grained test control is needed, custom content may be provided through an external CTest script using the :prop_dir:`TEST_INCLUDE_FILES` directory property. The set of discovered tests is made accessible to such a script via the ``_TESTS`` variable. The options are: ``target`` Specifies the Google Test executable, which must be a known CMake executable target. CMake will substitute the location of the built executable when running the test. ``EXTRA_ARGS arg1...`` Any extra arguments to pass on the command line to each test case. ``WORKING_DIRECTORY dir`` Specifies the directory in which to run the discovered test cases. If this option is not provided, the current binary directory is used. ``TEST_PREFIX prefix`` Specifies a ``prefix`` to be prepended to the name of each discovered test case. This can be useful when the same test executable is being used in multiple calls to ``gtest_discover_tests()`` but with different ``EXTRA_ARGS``. ``TEST_SUFFIX suffix`` Similar to ``TEST_PREFIX`` except the ``suffix`` is appended to the name of every discovered test case. Both ``TEST_PREFIX`` and ``TEST_SUFFIX`` may be specified. ``NO_PRETTY_TYPES`` By default, the type index of type-parameterized tests is replaced by the actual type name in the CTest test name. If this behavior is undesirable (e.g. because the type names are unwieldy), this option will suppress this behavior. ``NO_PRETTY_VALUES`` By default, the value index of value-parameterized tests is replaced by the actual value in the CTest test name. If this behavior is undesirable (e.g. because the value strings are unwieldy), this option will suppress this behavior. ``PROPERTIES name1 value1...`` Specifies additional properties to be set on all tests discovered by this invocation of ``gtest_discover_tests``. ``TEST_LIST var`` Make the list of tests available in the variable ``var``, rather than the default ``_TESTS``. This can be useful when the same test executable is being used in multiple calls to ``gtest_discover_tests()``. Note that this variable is only available in CTest. ``DISCOVERY_TIMEOUT num`` Specifies how long (in seconds) CMake will wait for the test to enumerate available tests. If the test takes longer than this, discovery (and your build) will fail. Most test executables will enumerate their tests very quickly, but under some exceptional circumstances, a test may require a longer timeout. The default is 5. See also the ``TIMEOUT`` option of :command:`execute_process`. .. note:: In CMake versions 3.10.1 and 3.10.2, this option was called ``TIMEOUT``. This clashed with the ``TIMEOUT`` test property, which is one of the common properties that would be set with the ``PROPERTIES`` keyword, usually leading to legal but unintended behavior. The keyword was changed to ``DISCOVERY_TIMEOUT`` in CMake 3.10.3 to address this problem. The ambiguous behavior of the ``TIMEOUT`` keyword in 3.10.1 and 3.10.2 has not been preserved. #]=======================================================================] # Save project's policies cmake_policy(PUSH) cmake_policy(SET CMP0057 NEW) # if IN_LIST #------------------------------------------------------------------------------ function(gtest_add_tests) if (ARGC LESS 1) message(FATAL_ERROR "No arguments supplied to gtest_add_tests()") endif() set(options SKIP_DEPENDENCY ) set(oneValueArgs TARGET WORKING_DIRECTORY TEST_PREFIX TEST_SUFFIX TEST_LIST ) set(multiValueArgs SOURCES EXTRA_ARGS ) set(allKeywords ${options} ${oneValueArgs} ${multiValueArgs}) unset(sources) if("${ARGV0}" IN_LIST allKeywords) cmake_parse_arguments(ARGS "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN}) set(autoAddSources YES) else() # Non-keyword syntax, convert to keyword form if (ARGC LESS 3) message(FATAL_ERROR "gtest_add_tests() without keyword options requires at least 3 arguments") endif() set(ARGS_TARGET "${ARGV0}") set(ARGS_EXTRA_ARGS "${ARGV1}") if(NOT "${ARGV2}" STREQUAL "AUTO") set(ARGS_SOURCES "${ARGV}") list(REMOVE_AT ARGS_SOURCES 0 1) endif() endif() # The non-keyword syntax allows the first argument to be an arbitrary # executable rather than a target if source files are also provided. In all # other cases, both forms require a target. if(NOT TARGET "${ARGS_TARGET}" AND NOT ARGS_SOURCES) message(FATAL_ERROR "${ARGS_TARGET} does not define an existing CMake target") endif() if(NOT ARGS_WORKING_DIRECTORY) unset(workDir) else() set(workDir WORKING_DIRECTORY "${ARGS_WORKING_DIRECTORY}") endif() if(NOT ARGS_SOURCES) get_property(ARGS_SOURCES TARGET ${ARGS_TARGET} PROPERTY SOURCES) endif() unset(testList) set(gtest_case_name_regex ".*\\( *([A-Za-z_0-9]+) *, *([A-Za-z_0-9]+) *\\).*") set(gtest_test_type_regex "(TYPED_TEST|TEST_?[FP]?)") foreach(source IN LISTS ARGS_SOURCES) if(NOT ARGS_SKIP_DEPENDENCY) set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS ${source}) endif() file(READ "${source}" contents) string(REGEX MATCHALL "${gtest_test_type_regex} *\\(([A-Za-z_0-9 ,]+)\\)" found_tests ${contents}) foreach(hit ${found_tests}) string(REGEX MATCH "${gtest_test_type_regex}" test_type ${hit}) # Parameterized tests have a different signature for the filter if("x${test_type}" STREQUAL "xTEST_P") string(REGEX REPLACE ${gtest_case_name_regex} "*/\\1.\\2/*" gtest_test_name ${hit}) elseif("x${test_type}" STREQUAL "xTEST_F" OR "x${test_type}" STREQUAL "xTEST") string(REGEX REPLACE ${gtest_case_name_regex} "\\1.\\2" gtest_test_name ${hit}) elseif("x${test_type}" STREQUAL "xTYPED_TEST") string(REGEX REPLACE ${gtest_case_name_regex} "\\1/*.\\2" gtest_test_name ${hit}) else() message(WARNING "Could not parse GTest ${hit} for adding to CTest.") continue() endif() # Make sure tests disabled in GTest get disabled in CTest if(gtest_test_name MATCHES "(^|\\.)DISABLED_") # Add the disabled test if CMake is new enough # Note that this check is to allow backwards compatibility so this # module can be copied locally in projects to use with older CMake # versions if(CMAKE_VERSION VERSION_GREATER_EQUAL 3.8.20170401) string(REGEX REPLACE "(^|\\.)DISABLED_" "\\1" orig_test_name "${gtest_test_name}" ) set(ctest_test_name ${ARGS_TEST_PREFIX}${orig_test_name}${ARGS_TEST_SUFFIX} ) add_test(NAME ${ctest_test_name} ${workDir} COMMAND ${ARGS_TARGET} --gtest_also_run_disabled_tests --gtest_filter=${gtest_test_name} ${ARGS_EXTRA_ARGS} ) set_tests_properties(${ctest_test_name} PROPERTIES DISABLED TRUE) list(APPEND testList ${ctest_test_name}) endif() else() set(ctest_test_name ${ARGS_TEST_PREFIX}${gtest_test_name}${ARGS_TEST_SUFFIX}) add_test(NAME ${ctest_test_name} ${workDir} COMMAND ${ARGS_TARGET} --gtest_filter=${gtest_test_name} ${ARGS_EXTRA_ARGS} ) list(APPEND testList ${ctest_test_name}) endif() endforeach() endforeach() if(ARGS_TEST_LIST) set(${ARGS_TEST_LIST} ${testList} PARENT_SCOPE) endif() endfunction() #------------------------------------------------------------------------------ function(gtest_discover_tests TARGET) cmake_parse_arguments( "" "NO_PRETTY_TYPES;NO_PRETTY_VALUES" "TEST_PREFIX;TEST_SUFFIX;WORKING_DIRECTORY;TEST_LIST;DISCOVERY_TIMEOUT" "EXTRA_ARGS;PROPERTIES" ${ARGN} ) if(NOT _WORKING_DIRECTORY) set(_WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}") endif() if(NOT _TEST_LIST) set(_TEST_LIST ${TARGET}_TESTS) endif() if(NOT _DISCOVERY_TIMEOUT) set(_DISCOVERY_TIMEOUT 5) endif() get_property( has_counter TARGET ${TARGET} PROPERTY CTEST_DISCOVERED_TEST_COUNTER SET ) if(has_counter) get_property( counter TARGET ${TARGET} PROPERTY CTEST_DISCOVERED_TEST_COUNTER ) math(EXPR counter "${counter} + 1") else() set(counter 1) endif() set_property( TARGET ${TARGET} PROPERTY CTEST_DISCOVERED_TEST_COUNTER ${counter} ) # Define rule to generate test list for aforementioned test executable set(ctest_file_base "${CMAKE_CURRENT_BINARY_DIR}/${TARGET}[${counter}]") set(ctest_include_file "${ctest_file_base}_include.cmake") set(ctest_tests_file "${ctest_file_base}_tests.cmake") get_property(crosscompiling_emulator TARGET ${TARGET} PROPERTY CROSSCOMPILING_EMULATOR ) add_custom_command( TARGET ${TARGET} POST_BUILD BYPRODUCTS "${ctest_tests_file}" COMMAND "${CMAKE_COMMAND}" -D "TEST_TARGET=${TARGET}" -D "TEST_EXECUTABLE=$" -D "TEST_EXECUTOR=${crosscompiling_emulator}" -D "TEST_WORKING_DIR=${_WORKING_DIRECTORY}" -D "TEST_EXTRA_ARGS=${_EXTRA_ARGS}" -D "TEST_PROPERTIES=${_PROPERTIES}" -D "TEST_PREFIX=${_TEST_PREFIX}" -D "TEST_SUFFIX=${_TEST_SUFFIX}" -D "NO_PRETTY_TYPES=${_NO_PRETTY_TYPES}" -D "NO_PRETTY_VALUES=${_NO_PRETTY_VALUES}" -D "TEST_LIST=${_TEST_LIST}" -D "CTEST_FILE=${ctest_tests_file}" -D "TEST_DISCOVERY_TIMEOUT=${_DISCOVERY_TIMEOUT}" -P "${_GOOGLETEST_DISCOVER_TESTS_SCRIPT}" VERBATIM ) file(WRITE "${ctest_include_file}" "if(EXISTS \"${ctest_tests_file}\")\n" " include(\"${ctest_tests_file}\")\n" "else()\n" " add_test(${TARGET}_NOT_BUILT ${TARGET}_NOT_BUILT)\n" "endif()\n" ) # Add discovered tests to directory TEST_INCLUDE_FILES set_property(DIRECTORY APPEND PROPERTY TEST_INCLUDE_FILES "${ctest_include_file}" ) endfunction() ############################################################################### set(_GOOGLETEST_DISCOVER_TESTS_SCRIPT ${CMAKE_CURRENT_LIST_DIR}/GoogleTestAddTests.cmake ) # Restore project's policies cmake_policy(POP)