diff options
Diffstat (limited to 'Utilities/cmlibarchive/libarchive/archive_write_set_options.3')
| -rw-r--r-- | Utilities/cmlibarchive/libarchive/archive_write_set_options.3 | 437 |
1 files changed, 437 insertions, 0 deletions
diff --git a/Utilities/cmlibarchive/libarchive/archive_write_set_options.3 b/Utilities/cmlibarchive/libarchive/archive_write_set_options.3 new file mode 100644 index 000000000..9a8ea3dbf --- /dev/null +++ b/Utilities/cmlibarchive/libarchive/archive_write_set_options.3 @@ -0,0 +1,437 @@ +.\" Copyright (c) 2003-2010 Tim Kientzle +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD: head/lib/libarchive/archive_write.3 201110 2009-12-28 03:31:29Z kientzle $ +.\" +.Dd Feb 27, 2010 +.Dt ARCHIVE_WRITE_OPTIONS 3 +.Os +.Sh NAME +.Nm archive_write_set_filter_option , +.Nm archive_write_set_format_option , +.Nm archive_write_set_option , +.Nm archive_write_set_options +.Nd functions controlling options for reading archives +.Sh SYNOPSIS +.\" +.Sh SYNOPSIS +.Ft int +.Fo archive_write_set_filter_option +.Fa "struct archive *" +.Fa "const char *module" +.Fa "const char *option" +.Fa "const char *value" +.Fc +.Ft int +.Fo archive_write_set_format_option +.Fa "struct archive *" +.Fa "const char *module" +.Fa "const char *option" +.Fa "const char *value" +.Fc +.Ft int +.Fo archive_write_set_option +.Fa "struct archive *" +.Fa "const char *module" +.Fa "const char *option" +.Fa "const char *value" +.Fc +.Ft int +.Fo archive_write_set_options +.Fa "struct archive *" +.Fa "const char *options" +.Fc +.Sh DESCRIPTION +These functions provide a way for libarchive clients to configure +specific write modules. +.Bl -tag -width indent +.It Xo +.Fn archive_write_set_filter_option , +.Fn archive_write_set_format_option +.Xc +Specifies an option that will be passed to currently-registered +filters (including decompression filters) or format readers. +.Pp +If +.Ar option +and +.Ar value +are both +.Dv NULL , +these functions will do nothing and +.Cm ARCHIVE_OK +will be returned. +If +.Ar option +is +.Dv NULL +but +.Ar value +is not, these functions will do nothing and +.Cm ARCHIVE_FAILED +will be returned. +.Pp +If +.Ar module +is not +.Dv NULL , +.Ar option +and +.Ar value +will be provided to the filter or reader named +.Ar module . +The return value will be that of the module. +If there is no such module, +.Cm ARCHIVE_FAILED +will be returned. +.Pp +If +.Ar module +is +.Dv NULL , +.Ar option +and +.Ar value +will be provided to every registered module. +If any module returns +.Cm ARCHIVE_FATAL , +this value will be returned immediately. +Otherwise, +.Cm ARCHIVE_OK +will be returned if any module accepts the option, and +.Cm ARCHIVE_FAILED +in all other cases. +.\" +.It Xo +.Fn archive_write_set_option +.Xc +Calls +.Fn archive_write_set_format_option , +then +.Fn archive_write_set_filter_option . +If either function returns +.Cm ARCHIVE_FATAL , +.Cm ARCHIVE_FATAL +will be returned +immediately. +Otherwise, greater of the two values will be returned. +.\" +.It Xo +.Fn archive_write_set_options +.Xc +.Ar options +is a comma-separated list of options. +If +.Ar options +is +.Dv NULL +or empty, +.Cm ARCHIVE_OK +will be returned immediately. +.Pp +Individual options have one of the following forms: +.Bl -tag -compact -width indent +.It Ar option=value +The option/value pair will be provided to every module. +Modules that do not accept an option with this name will ignore it. +.It Ar option +The option will be provided to every module with a value of +.Dq 1 . +.It Ar !option +The option will be provided to every module with a NULL value. +.It Ar module:option=value , Ar module:option , Ar module:!option +As above, but the corresponding option and value will be provided +only to modules whose name matches +.Ar module . +.El +.El +.\" +.Sh OPTIONS +.Bl -tag -compact -width indent +.It Filter gzip +.Bl -tag -compact -width indent +.It Cm compression-level +The value is interpreted as a decimal integer specifying the +gzip compression level. +.El +.It Filter xz +.Bl -tag -compact -width indent +.It Cm compression-level +The value is interpreted as a decimal integer specifying the +compression level. +.El +.It Format mtree +.Bl -tag -compact -width indent +.It Cm cksum , Cm device , Cm flags , Cm gid , Cm gname , Cm indent , Cm link , Cm md5 , Cm mode , Cm nlink , Cm rmd160 , Cm sha1 , Cm sha256 , Cm sha384 , Cm sha512 , Cm size , Cm time , Cm uid , Cm uname +Enable a particular keyword in the mtree output. +Prefix with an exclamation mark to disable the corresponding keyword. +The default is equivalent to +.Dq device, flags, gid, gname, link, mode, nlink, size, time, type, uid, uname . +.It Cm all +Enables all of the above keywords. +.It Cm use-set +Enables generation of +.Cm /set +lines that specify default values for the following files and/or directories. +.It Cm indent +XXX needs explanation XXX +.El +.It Format iso9660 - volume metadata +These options are used to set standard ISO9660 metadata. +.Bl -tag -compact -width indent +.It Cm abstract-file Ns = Ns Ar filename +The file with the specified name will be identified in the ISO9660 metadata +as holding the abstract for this volume. Default: none. +.It Cm application-id Ns = Ns Ar filename +The file with the specified name will be identified in the ISO9660 metadata +as holding the application identifier for this volume. Default: none. +.It Cm biblio-file Ns = Ns Ar filename +The file with the specified name will be identified in the ISO9660 metadata +as holding the bibliography for this volume. Default: none. +.It Cm copyright-file Ns = Ns Ar filename +The file with the specified name will be identified in the ISO9660 metadata +as holding the copyright for this volume. Default: none. +.It Cm publisher Ns = Ns Ar filename +The file with the specified name will be identified in the ISO9660 metadata +as holding the publisher information for this volume. Default: none. +.It Cm volume-id Ns = Ns Ar string +The specified string will be used as the Volume Identifier in the ISO9660 metadata. +It is limited to 32 bytes. Default: none. +.El +.It Format iso9660 - boot support +These options are used to make an ISO9660 image that can be directly +booted on various systems. +.Bl -tag -compact -width indent +.It Cm boot Ns = Ns Ar filename +The file matching this name will be used as the El Torito boot image file. +.It Cm boot-catalog Ns = Ns Ar name +The name that will be used for the El Torito boot catalog. +Default: +.Ar boot.catalog +.It Cm boot-info-table +The boot image file provided by the +.Cm boot Ns = Ns Ar filename +option will be edited with appropriate boot information in bytes 8 through 64. +Default: disabled +.It Cm boot-load-seg Ns = Ns Ar hexadecimal-number +The load segment for a no-emulation boot image. +.It Cm boot-load-size Ns = Ns Ar decimal-number +The number of "virtual" 512-byte sectors to be loaded from a no-emulation boot image. +Some very old BIOSes can only load very small images, setting this +value to 4 will often allow such BIOSes to load the first part of +the boot image (which will then need to be intelligent enough to +load the rest of itself). +This should not be needed unless you are trying to support systems with very old BIOSes. +This defaults to the full size of the image. +.It Cm boot-type Ns = Ns Ar value +Specifies the boot semantics used by the El Torito boot image: +If the +.Ar value +is +.Cm fd , +then the boot image is assumed to be a bootable floppy image. +If the +.Ar value +is +.Cm hd , +then the the boot image is assumed to be a bootable hard disk image. +If the +.Ar value +is +.Cm no-emulation , +the boot image is used without floppy or hard disk emulation. +If the boot image is exactly 1.2MB, 1.44MB, or 2.88MB, then +the default is +.Cm fd , +otherwise the default is +.Cm no-emulation. +.El +.It Format iso9660 - filename and size extensions +Various extensions to the base ISO9660 format. +.Bl -tag -compact -width indent +.It Cm allow-ldots +If enabled, allows filenames to begin with a leading period. +If disabled, filenames that begin with a leading period will have +that period replaced by an underscore character in the standard ISO9660 +namespace. +This does not impact names stored in the Rockridge or Joliet extension area. +Default: disabled. +.It Cm allow-lowercase +If enabled, allows filenames to contain lowercase characters. +If disabled, filenames will be forced to uppercase. +This does not impact names stored in the Rockridge or Joliet extension area. +Default: disabled. +.It Cm allow-multidot +If enabled, allows filenames to contain multiple period characters, in violation of the ISO9660 specification. +If disabled, additional periods will be converted to underscore characters. +This does not impact names stored in the Rockridge or Joliet extension area. +Default: disabled. +.It Cm allow-period +If enabled, allows filenames to contain trailing period characters, in violation of the ISO9660 specification. +If disabled,trailing periods will be converted to underscore characters. +This does not impact names stored in the Rockridge or Joliet extension area. +Default: disabled. +.It Cm allow-pvd-lowercase +If enabled, the Primary Volume Descriptor may contain lowercase ASCII characters, in violation of the ISO9660 specification. +If disabled, characters will be converted to uppercase ASCII. +Default: disabled. +.It Cm allow-sharp-tilde +If enabled, sharp and tilde characters will be permitted in filenames, in violation if the ISO9660 specification. +If disabled, such characters will be converted to underscore characters. +Default: disabled. +.It Cm allow-vernum +If enabled, version numbers will be included with files. +If disabled, version numbers will be suppressed, in violation of the ISO9660 standard. +This does not impact names stored in the Rockridge or Joliet extension area. +Default: enabled. +.It Cm iso-level +This enables support for file size and file name extensions in the +core ISO9660 area. +The name extensions specified here do not affect the names stored in the Rockridge or Joliet extension areas. +.Bl -tag -compact -width indent +.It Cm iso-level=1 +The most compliant form of ISO9660 image. +Filenames are limited to 8.3 uppercase format, +directory names are limited to 8 uppercase characters, +files are limited to 4 GiB, +the complete ISO9660 image cannot exceed 4 GiB. +.It Cm iso-level=2 +Filenames are limited to 30 uppercase characters with a 30-character extension, +directory names are limited to 30 characters, +files are limited to 4 GiB. +.It Cm iso-level=3 +As with +.Cm iso-level=2 , +except that files may exceed 4 GiB. +.It Cm iso-level=4 +As with +.Cm iso-level=3 , +except that filenames may be up to 193 characters +and may include arbitrary 8-bit characters. +.El +.It Cm joliet +Microsoft's Joliet extensions store a completely separate set of directory information about each file. +In particular, this information includes Unicode filenames of up to 255 characters. +Default: enabled. +.It Cm limit-depth +If enabled, libarchive will use directory relocation records to ensure that +no pathname exceeds the ISO9660 limit of 8 directory levels. +If disabled, no relocation will occur. +Default: enabled. +.It Cm limit-dirs +If enabled, libarchive will cause an error if there are more than +65536 directories. +If disabled, there is no limit on the number of directories. +Default: enabled +.It Cm pad +If enabled, 300 kiB of zero bytes will be appended to the end of the archive. +Default: enabled +.It Cm relaxed-filenames +If enabled, all 7-bit ASCII characters are permitted in filenames +(except lowercase characters unless +.Cm allow-lowercase +is also specified). +This violates ISO9660 standards. +This does not impact names stored in the Rockridge or Joliet extension area. +Default: disabled. +.It Cm rockridge +The Rockridge extensions store an additional set of POSIX-style file +information with each file, including mtime, atime, ctime, permissions, +and long filenames with arbitrary 8-bit characters. +These extensions also support symbolic links and other POSIX file types. +Default: enabled. +.El +.It Format iso9660 - zisofs support +The zisofs extensions permit each file to be independently compressed +using a gzip-compatible compression. +This can provide significant size savings, but requires the reading +system to have support for these extensions. +These extensions are disabled by default. +.Bl -tag -compact -width indent +.It Cm compression-level Ns = Ns number +The compression level used by the deflate compressor. +Ranges from 0 (least effort) to 9 (most effort). +Default: 6 +.It Cm zisofs +Synonym for +.Cm zisofs=direct . +.It Cm zisofs=direct +Compress each file in the archive. +Unlike +.Cm zisofs=indirect , +this is handled entirely within libarchive and does not require a +separate utility. +For best results, libarchive tests each file and will store +the file uncompressed if the compression does not actually save any space. +In particular, files under 2k will never be compressed. +Note that boot image files are never compressed. +.It Cm zisofs=indirect +Recognizes files that have already been compressed with the +.Cm mkzftree +utility and sets up the necessary file metadata so that +readers will correctly identify these as zisofs-compressed files. +.It Cm zisofs-exclude Ns = Ns Ar filename +Specifies a filename that should not be compressed when using +.Cm zisofs=direct . +This option can be provided multiple times to suppress compression +on many files. +.El +.El +.Sh EXAMPLES +The following example creates an archive write handle to +create a gzip-compressed ISO9660 format image. +The two options here specify that the ISO9660 archive will use +.Ar kernel.img +as the boot image for El Torito booting, and that the gzip +compressor should use the maximum compression level. +.Bd -literal -offset indent +a = archive_write_new(); +archive_write_add_filter_gzip(a); +archive_write_set_format_iso9660(a); +archive_write_set_options(a, "boot=kernel.img,compression=9"); +archive_write_open_filename(a, filename, blocksize); +.Ed +.\" +.Sh ERRORS +Detailed error codes and textual descriptions are available from the +.Fn archive_errno +and +.Fn archive_error_string +functions. +.\" +.Sh SEE ALSO +.Xr tar 1 , +.Xr libarchive 3 , +.Xr archive_read_set_options 3 , +.Xr archive_write 3 +.Sh HISTORY +The +.Nm libarchive +library first appeared in +.Fx 5.3 . +.Sh AUTHORS +.An -nosplit +The options support for libarchive was originally implemented by +.An Michihiro NAKAJIMA . +.Sh BUGS |