diff options
Diffstat (limited to 'Utilities/cmcurl/lib/setopt.c')
| -rw-r--r-- | Utilities/cmcurl/lib/setopt.c | 2556 |
1 files changed, 2556 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/setopt.c b/Utilities/cmcurl/lib/setopt.c new file mode 100644 index 000000000..a5ef75c72 --- /dev/null +++ b/Utilities/cmcurl/lib/setopt.c @@ -0,0 +1,2556 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl_setup.h" + +#include <limits.h> + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif + +#ifdef HAVE_LINUX_TCP_H +#include <linux/tcp.h> +#endif + +#include "urldata.h" +#include "url.h" +#include "progress.h" +#include "content_encoding.h" +#include "strcase.h" +#include "share.h" +#include "vtls/vtls.h" +#include "warnless.h" +#include "sendf.h" +#include "http2.h" +#include "setopt.h" + +/* The last 3 #include files should be in this order */ +#include "curl_printf.h" +#include "curl_memory.h" +#include "memdebug.h" + +CURLcode Curl_setstropt(char **charp, const char *s) +{ + /* Release the previous storage at `charp' and replace by a dynamic storage + copy of `s'. Return CURLE_OK or CURLE_OUT_OF_MEMORY. */ + + Curl_safefree(*charp); + + if(s) { + char *str = strdup(s); + + if(!str) + return CURLE_OUT_OF_MEMORY; + + *charp = str; + } + + return CURLE_OK; +} + +static CURLcode setstropt_userpwd(char *option, char **userp, char **passwdp) +{ + CURLcode result = CURLE_OK; + char *user = NULL; + char *passwd = NULL; + + /* Parse the login details if specified. It not then we treat NULL as a hint + to clear the existing data */ + if(option) { + result = Curl_parse_login_details(option, strlen(option), + (userp ? &user : NULL), + (passwdp ? &passwd : NULL), + NULL); + } + + if(!result) { + /* Store the username part of option if required */ + if(userp) { + if(!user && option && option[0] == ':') { + /* Allocate an empty string instead of returning NULL as user name */ + user = strdup(""); + if(!user) + result = CURLE_OUT_OF_MEMORY; + } + + Curl_safefree(*userp); + *userp = user; + } + + /* Store the password part of option if required */ + if(passwdp) { + Curl_safefree(*passwdp); + *passwdp = passwd; + } + } + + return result; +} + +#define C_SSLVERSION_VALUE(x) (x & 0xffff) +#define C_SSLVERSION_MAX_VALUE(x) (x & 0xffff0000) + +CURLcode Curl_vsetopt(struct Curl_easy *data, CURLoption option, + va_list param) +{ + char *argptr; + CURLcode result = CURLE_OK; + long arg; + curl_off_t bigsize; + + switch(option) { + case CURLOPT_DNS_CACHE_TIMEOUT: + arg = va_arg(param, long); + if(arg < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.dns_cache_timeout = arg; + break; + case CURLOPT_DNS_USE_GLOBAL_CACHE: + /* remember we want this enabled */ + arg = va_arg(param, long); + data->set.global_dns_cache = (0 != arg) ? TRUE : FALSE; + break; + case CURLOPT_SSL_CIPHER_LIST: + /* set a list of cipher we want to use in the SSL connection */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CIPHER_LIST_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_SSL_CIPHER_LIST: + /* set a list of cipher we want to use in the SSL connection for proxy */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CIPHER_LIST_PROXY], + va_arg(param, char *)); + break; + + case CURLOPT_RANDOM_FILE: + /* + * This is the path name to a file that contains random data to seed + * the random SSL stuff with. The file is only used for reading. + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_RANDOM_FILE], + va_arg(param, char *)); + break; + case CURLOPT_EGDSOCKET: + /* + * The Entropy Gathering Daemon socket pathname + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_EGDSOCKET], + va_arg(param, char *)); + break; + case CURLOPT_MAXCONNECTS: + /* + * Set the absolute number of maximum simultaneous alive connection that + * libcurl is allowed to have. + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.maxconnects = arg; + break; + case CURLOPT_FORBID_REUSE: + /* + * When this transfer is done, it must not be left to be reused by a + * subsequent transfer but shall be closed immediately. + */ + data->set.reuse_forbid = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_FRESH_CONNECT: + /* + * This transfer shall not use a previously cached connection but + * should be made with a fresh new connect! + */ + data->set.reuse_fresh = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_VERBOSE: + /* + * Verbose means infof() calls that give a lot of information about + * the connection and transfer procedures as well as internal choices. + */ + data->set.verbose = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_HEADER: + /* + * Set to include the header in the general data output stream. + */ + data->set.include_header = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_NOPROGRESS: + /* + * Shut off the internal supported progress meter + */ + data->set.hide_progress = (0 != va_arg(param, long)) ? TRUE : FALSE; + if(data->set.hide_progress) + data->progress.flags |= PGRS_HIDE; + else + data->progress.flags &= ~PGRS_HIDE; + break; + case CURLOPT_NOBODY: + /* + * Do not include the body part in the output data stream. + */ + data->set.opt_no_body = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_FAILONERROR: + /* + * Don't output the >=400 error code HTML-page, but instead only + * return error. + */ + data->set.http_fail_on_error = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_KEEP_SENDING_ON_ERROR: + data->set.http_keep_sending_on_error = (0 != va_arg(param, long)) ? + TRUE : FALSE; + break; + case CURLOPT_UPLOAD: + case CURLOPT_PUT: + /* + * We want to sent data to the remote host. If this is HTTP, that equals + * using the PUT request. + */ + data->set.upload = (0 != va_arg(param, long)) ? TRUE : FALSE; + if(data->set.upload) { + /* If this is HTTP, PUT is what's needed to "upload" */ + data->set.httpreq = HTTPREQ_PUT; + data->set.opt_no_body = FALSE; /* this is implied */ + } + else + /* In HTTP, the opposite of upload is GET (unless NOBODY is true as + then this can be changed to HEAD later on) */ + data->set.httpreq = HTTPREQ_GET; + break; + case CURLOPT_REQUEST_TARGET: + result = Curl_setstropt(&data->set.str[STRING_TARGET], + va_arg(param, char *)); + break; + case CURLOPT_FILETIME: + /* + * Try to get the file time of the remote document. The time will + * later (possibly) become available using curl_easy_getinfo(). + */ + data->set.get_filetime = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_FTP_CREATE_MISSING_DIRS: + /* + * An FTP option that modifies an upload to create missing directories on + * the server. + */ + switch(va_arg(param, long)) { + case 0: + data->set.ftp_create_missing_dirs = 0; + break; + case 1: + data->set.ftp_create_missing_dirs = 1; + break; + case 2: + data->set.ftp_create_missing_dirs = 2; + break; + default: + /* reserve other values for future use */ + result = CURLE_UNKNOWN_OPTION; + break; + } + break; + case CURLOPT_SERVER_RESPONSE_TIMEOUT: + /* + * Option that specifies how quickly an server response must be obtained + * before it is considered failure. For pingpong protocols. + */ + arg = va_arg(param, long); + if((arg >= 0) && (arg <= (INT_MAX/1000))) + data->set.server_response_timeout = arg * 1000; + else + return CURLE_BAD_FUNCTION_ARGUMENT; + break; + case CURLOPT_TFTP_NO_OPTIONS: + /* + * Option that prevents libcurl from sending TFTP option requests to the + * server. + */ + data->set.tftp_no_options = va_arg(param, long) != 0; + break; + case CURLOPT_TFTP_BLKSIZE: + /* + * TFTP option that specifies the block size to use for data transmission. + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.tftp_blksize = arg; + break; + case CURLOPT_DIRLISTONLY: + /* + * An option that changes the command to one that asks for a list + * only, no file info details. + */ + data->set.ftp_list_only = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_APPEND: + /* + * We want to upload and append to an existing file. + */ + data->set.ftp_append = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_FTP_FILEMETHOD: + /* + * How do access files over FTP. + */ + arg = va_arg(param, long); + if((arg < CURLFTPMETHOD_DEFAULT) || (arg > CURLFTPMETHOD_SINGLECWD)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.ftp_filemethod = (curl_ftpfile)arg; + break; + case CURLOPT_NETRC: + /* + * Parse the $HOME/.netrc file + */ + arg = va_arg(param, long); + if((arg < CURL_NETRC_IGNORED) || (arg > CURL_NETRC_REQUIRED)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.use_netrc = (enum CURL_NETRC_OPTION)arg; + break; + case CURLOPT_NETRC_FILE: + /* + * Use this file instead of the $HOME/.netrc file + */ + result = Curl_setstropt(&data->set.str[STRING_NETRC_FILE], + va_arg(param, char *)); + break; + case CURLOPT_TRANSFERTEXT: + /* + * This option was previously named 'FTPASCII'. Renamed to work with + * more protocols than merely FTP. + * + * Transfer using ASCII (instead of BINARY). + */ + data->set.prefer_ascii = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_TIMECONDITION: + /* + * Set HTTP time condition. This must be one of the defines in the + * curl/curl.h header file. + */ + arg = va_arg(param, long); + if((arg < CURL_TIMECOND_NONE) || (arg > CURL_TIMECOND_LASTMOD)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.timecondition = (curl_TimeCond)arg; + break; + case CURLOPT_TIMEVALUE: + /* + * This is the value to compare with the remote document with the + * method set with CURLOPT_TIMECONDITION + */ + data->set.timevalue = (time_t)va_arg(param, long); + break; + + case CURLOPT_SSLVERSION: + case CURLOPT_PROXY_SSLVERSION: + /* + * Set explicit SSL version to try to connect with, as some SSL + * implementations are lame. + */ +#ifdef USE_SSL + { + long version, version_max; + struct ssl_primary_config *primary = (option == CURLOPT_SSLVERSION ? + &data->set.ssl.primary : + &data->set.proxy_ssl.primary); + + arg = va_arg(param, long); + + version = C_SSLVERSION_VALUE(arg); + version_max = C_SSLVERSION_MAX_VALUE(arg); + + if(version < CURL_SSLVERSION_DEFAULT || + version >= CURL_SSLVERSION_LAST || + version_max < CURL_SSLVERSION_MAX_NONE || + version_max >= CURL_SSLVERSION_MAX_LAST) + return CURLE_BAD_FUNCTION_ARGUMENT; + + primary->version = version; + primary->version_max = version_max; + } +#else + result = CURLE_UNKNOWN_OPTION; +#endif + break; + +#ifndef CURL_DISABLE_HTTP + case CURLOPT_AUTOREFERER: + /* + * Switch on automatic referer that gets set if curl follows locations. + */ + data->set.http_auto_referer = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_ACCEPT_ENCODING: + /* + * String to use at the value of Accept-Encoding header. + * + * If the encoding is set to "" we use an Accept-Encoding header that + * encompasses all the encodings we support. + * If the encoding is set to NULL we don't send an Accept-Encoding header + * and ignore an received Content-Encoding header. + * + */ + argptr = va_arg(param, char *); + if(argptr && !*argptr) { + argptr = Curl_all_content_encodings(); + if(!argptr) + result = CURLE_OUT_OF_MEMORY; + else { + result = Curl_setstropt(&data->set.str[STRING_ENCODING], argptr); + free(argptr); + } + } + else + result = Curl_setstropt(&data->set.str[STRING_ENCODING], argptr); + break; + + case CURLOPT_TRANSFER_ENCODING: + data->set.http_transfer_encoding = (0 != va_arg(param, long)) ? + TRUE : FALSE; + break; + + case CURLOPT_FOLLOWLOCATION: + /* + * Follow Location: header hints on a HTTP-server. + */ + data->set.http_follow_location = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_UNRESTRICTED_AUTH: + /* + * Send authentication (user+password) when following locations, even when + * hostname changed. + */ + data->set.allow_auth_to_other_hosts = + (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_MAXREDIRS: + /* + * The maximum amount of hops you allow curl to follow Location: + * headers. This should mostly be used to detect never-ending loops. + */ + arg = va_arg(param, long); + if(arg < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.maxredirs = arg; + break; + + case CURLOPT_POSTREDIR: + /* + * Set the behaviour of POST when redirecting + * CURL_REDIR_GET_ALL - POST is changed to GET after 301 and 302 + * CURL_REDIR_POST_301 - POST is kept as POST after 301 + * CURL_REDIR_POST_302 - POST is kept as POST after 302 + * CURL_REDIR_POST_303 - POST is kept as POST after 303 + * CURL_REDIR_POST_ALL - POST is kept as POST after 301, 302 and 303 + * other - POST is kept as POST after 301 and 302 + */ + arg = va_arg(param, long); + if(arg < CURL_REDIR_GET_ALL) + /* no return error on too high numbers since the bitmask could be + extended in a future */ + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.keep_post = arg & CURL_REDIR_POST_ALL; + break; + + case CURLOPT_POST: + /* Does this option serve a purpose anymore? Yes it does, when + CURLOPT_POSTFIELDS isn't used and the POST data is read off the + callback! */ + if(va_arg(param, long)) { + data->set.httpreq = HTTPREQ_POST; + data->set.opt_no_body = FALSE; /* this is implied */ + } + else + data->set.httpreq = HTTPREQ_GET; + break; + + case CURLOPT_COPYPOSTFIELDS: + /* + * A string with POST data. Makes curl HTTP POST. Even if it is NULL. + * If needed, CURLOPT_POSTFIELDSIZE must have been set prior to + * CURLOPT_COPYPOSTFIELDS and not altered later. + */ + argptr = va_arg(param, char *); + + if(!argptr || data->set.postfieldsize == -1) + result = Curl_setstropt(&data->set.str[STRING_COPYPOSTFIELDS], argptr); + else { + /* + * Check that requested length does not overflow the size_t type. + */ + + if((data->set.postfieldsize < 0) || + ((sizeof(curl_off_t) != sizeof(size_t)) && + (data->set.postfieldsize > (curl_off_t)((size_t)-1)))) + result = CURLE_OUT_OF_MEMORY; + else { + char *p; + + (void) Curl_setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL); + + /* Allocate even when size == 0. This satisfies the need of possible + later address compare to detect the COPYPOSTFIELDS mode, and + to mark that postfields is used rather than read function or + form data. + */ + p = malloc((size_t)(data->set.postfieldsize? + data->set.postfieldsize:1)); + + if(!p) + result = CURLE_OUT_OF_MEMORY; + else { + if(data->set.postfieldsize) + memcpy(p, argptr, (size_t)data->set.postfieldsize); + + data->set.str[STRING_COPYPOSTFIELDS] = p; + } + } + } + + data->set.postfields = data->set.str[STRING_COPYPOSTFIELDS]; + data->set.httpreq = HTTPREQ_POST; + break; + + case CURLOPT_POSTFIELDS: + /* + * Like above, but use static data instead of copying it. + */ + data->set.postfields = va_arg(param, void *); + /* Release old copied data. */ + (void) Curl_setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL); + data->set.httpreq = HTTPREQ_POST; + break; + + case CURLOPT_POSTFIELDSIZE: + /* + * The size of the POSTFIELD data to prevent libcurl to do strlen() to + * figure it out. Enables binary posts. + */ + bigsize = va_arg(param, long); + if(bigsize < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + + if(data->set.postfieldsize < bigsize && + data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) { + /* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */ + (void) Curl_setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL); + data->set.postfields = NULL; + } + + data->set.postfieldsize = bigsize; + break; + + case CURLOPT_POSTFIELDSIZE_LARGE: + /* + * The size of the POSTFIELD data to prevent libcurl to do strlen() to + * figure it out. Enables binary posts. + */ + bigsize = va_arg(param, curl_off_t); + if(bigsize < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + + if(data->set.postfieldsize < bigsize && + data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) { + /* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */ + (void) Curl_setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL); + data->set.postfields = NULL; + } + + data->set.postfieldsize = bigsize; + break; + + case CURLOPT_HTTPPOST: + /* + * Set to make us do HTTP POST + */ + data->set.httppost = va_arg(param, struct curl_httppost *); + data->set.httpreq = HTTPREQ_POST_FORM; + data->set.opt_no_body = FALSE; /* this is implied */ + break; +#endif /* CURL_DISABLE_HTTP */ + + case CURLOPT_MIMEPOST: + /* + * Set to make us do MIME/form POST + */ + result = Curl_mime_set_subparts(&data->set.mimepost, + va_arg(param, curl_mime *), FALSE); + if(!result) { + data->set.httpreq = HTTPREQ_POST_MIME; + data->set.opt_no_body = FALSE; /* this is implied */ + } + break; + + case CURLOPT_REFERER: + /* + * String to set in the HTTP Referer: field. + */ + if(data->change.referer_alloc) { + Curl_safefree(data->change.referer); + data->change.referer_alloc = FALSE; + } + result = Curl_setstropt(&data->set.str[STRING_SET_REFERER], + va_arg(param, char *)); + data->change.referer = data->set.str[STRING_SET_REFERER]; + break; + + case CURLOPT_USERAGENT: + /* + * String to use in the HTTP User-Agent field + */ + result = Curl_setstropt(&data->set.str[STRING_USERAGENT], + va_arg(param, char *)); + break; + + case CURLOPT_HTTPHEADER: + /* + * Set a list with HTTP headers to use (or replace internals with) + */ + data->set.headers = va_arg(param, struct curl_slist *); + break; + +#ifndef CURL_DISABLE_HTTP + case CURLOPT_PROXYHEADER: + /* + * Set a list with proxy headers to use (or replace internals with) + * + * Since CURLOPT_HTTPHEADER was the only way to set HTTP headers for a + * long time we remain doing it this way until CURLOPT_PROXYHEADER is + * used. As soon as this option has been used, if set to anything but + * NULL, custom headers for proxies are only picked from this list. + * + * Set this option to NULL to restore the previous behavior. + */ + data->set.proxyheaders = va_arg(param, struct curl_slist *); + break; + + case CURLOPT_HEADEROPT: + /* + * Set header option. + */ + arg = va_arg(param, long); + data->set.sep_headers = (arg & CURLHEADER_SEPARATE)? TRUE: FALSE; + break; + + case CURLOPT_HTTP200ALIASES: + /* + * Set a list of aliases for HTTP 200 in response header + */ + data->set.http200aliases = va_arg(param, struct curl_slist *); + break; + +#if !defined(CURL_DISABLE_COOKIES) + case CURLOPT_COOKIE: + /* + * Cookie string to send to the remote server in the request. + */ + result = Curl_setstropt(&data->set.str[STRING_COOKIE], + va_arg(param, char *)); + break; + + case CURLOPT_COOKIEFILE: + /* + * Set cookie file to read and parse. Can be used multiple times. + */ + argptr = (char *)va_arg(param, void *); + if(argptr) { + struct curl_slist *cl; + /* append the cookie file name to the list of file names, and deal with + them later */ + cl = curl_slist_append(data->change.cookielist, argptr); + if(!cl) { + curl_slist_free_all(data->change.cookielist); + data->change.cookielist = NULL; + return CURLE_OUT_OF_MEMORY; + } + data->change.cookielist = cl; /* store the list for later use */ + } + break; + + case CURLOPT_COOKIEJAR: + /* + * Set cookie file name to dump all cookies to when we're done. + */ + { + struct CookieInfo *newcookies; + result = Curl_setstropt(&data->set.str[STRING_COOKIEJAR], + va_arg(param, char *)); + + /* + * Activate the cookie parser. This may or may not already + * have been made. + */ + newcookies = Curl_cookie_init(data, NULL, data->cookies, + data->set.cookiesession); + if(!newcookies) + result = CURLE_OUT_OF_MEMORY; + data->cookies = newcookies; + } + break; + + case CURLOPT_COOKIESESSION: + /* + * Set this option to TRUE to start a new "cookie session". It will + * prevent the forthcoming read-cookies-from-file actions to accept + * cookies that are marked as being session cookies, as they belong to a + * previous session. + * + * In the original Netscape cookie spec, "session cookies" are cookies + * with no expire date set. RFC2109 describes the same action if no + * 'Max-Age' is set and RFC2965 includes the RFC2109 description and adds + * a 'Discard' action that can enforce the discard even for cookies that + * have a Max-Age. + * + * We run mostly with the original cookie spec, as hardly anyone implements + * anything else. + */ + data->set.cookiesession = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_COOKIELIST: + argptr = va_arg(param, char *); + + if(argptr == NULL) + break; + + if(strcasecompare(argptr, "ALL")) { + /* clear all cookies */ + Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE); + Curl_cookie_clearall(data->cookies); + Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); + } + else if(strcasecompare(argptr, "SESS")) { + /* clear session cookies */ + Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE); + Curl_cookie_clearsess(data->cookies); + Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); + } + else if(strcasecompare(argptr, "FLUSH")) { + /* flush cookies to file, takes care of the locking */ + Curl_flush_cookies(data, 0); + } + else if(strcasecompare(argptr, "RELOAD")) { + /* reload cookies from file */ + Curl_cookie_loadfiles(data); + break; + } + else { + if(!data->cookies) + /* if cookie engine was not running, activate it */ + data->cookies = Curl_cookie_init(data, NULL, NULL, TRUE); + + argptr = strdup(argptr); + if(!argptr || !data->cookies) { + result = CURLE_OUT_OF_MEMORY; + free(argptr); + } + else { + Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE); + + if(checkprefix("Set-Cookie:", argptr)) + /* HTTP Header format line */ + Curl_cookie_add(data, data->cookies, TRUE, argptr + 11, NULL, NULL); + + else + /* Netscape format line */ + Curl_cookie_add(data, data->cookies, FALSE, argptr, NULL, NULL); + + Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); + free(argptr); + } + } + + break; +#endif /* !CURL_DISABLE_COOKIES */ + + case CURLOPT_HTTPGET: + /* + * Set to force us do HTTP GET + */ + if(va_arg(param, long)) { + data->set.httpreq = HTTPREQ_GET; + data->set.upload = FALSE; /* switch off upload */ + data->set.opt_no_body = FALSE; /* this is implied */ + } + break; + + case CURLOPT_HTTP_VERSION: + /* + * This sets a requested HTTP version to be used. The value is one of + * the listed enums in curl/curl.h. + */ + arg = va_arg(param, long); + if(arg < CURL_HTTP_VERSION_NONE) + return CURLE_BAD_FUNCTION_ARGUMENT; +#ifndef USE_NGHTTP2 + if(arg >= CURL_HTTP_VERSION_2) + return CURLE_UNSUPPORTED_PROTOCOL; +#else + if(arg > CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE) + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + data->set.httpversion = arg; + break; + + case CURLOPT_EXPECT_100_TIMEOUT_MS: + /* + * Time to wait for a response to a HTTP request containing an + * Expect: 100-continue header before sending the data anyway. + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.expect_100_timeout = arg; + break; + +#endif /* CURL_DISABLE_HTTP */ + + case CURLOPT_HTTPAUTH: + /* + * Set HTTP Authentication type BITMASK. + */ + { + int bitcheck; + bool authbits; + unsigned long auth = va_arg(param, unsigned long); + + if(auth == CURLAUTH_NONE) { + data->set.httpauth = auth; + break; + } + + /* the DIGEST_IE bit is only used to set a special marker, for all the + rest we need to handle it as normal DIGEST */ + data->state.authhost.iestyle = (auth & CURLAUTH_DIGEST_IE) ? TRUE : FALSE; + + if(auth & CURLAUTH_DIGEST_IE) { + auth |= CURLAUTH_DIGEST; /* set standard digest bit */ + auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */ + } + + /* switch off bits we can't support */ +#ifndef USE_NTLM + auth &= ~CURLAUTH_NTLM; /* no NTLM support */ + auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */ +#elif !defined(NTLM_WB_ENABLED) + auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */ +#endif +#ifndef USE_SPNEGO + auth &= ~CURLAUTH_NEGOTIATE; /* no Negotiate (SPNEGO) auth without + GSS-API or SSPI */ +#endif + + /* check if any auth bit lower than CURLAUTH_ONLY is still set */ + bitcheck = 0; + authbits = FALSE; + while(bitcheck < 31) { + if(auth & (1UL << bitcheck++)) { + authbits = TRUE; + break; + } + } + if(!authbits) + return CURLE_NOT_BUILT_IN; /* no supported types left! */ + + data->set.httpauth = auth; + } + break; + + case CURLOPT_CUSTOMREQUEST: + /* + * Set a custom string to use as request + */ + result = Curl_setstropt(&data->set.str[STRING_CUSTOMREQUEST], + va_arg(param, char *)); + + /* we don't set + data->set.httpreq = HTTPREQ_CUSTOM; + here, we continue as if we were using the already set type + and this just changes the actual request keyword */ + break; + +#ifndef CURL_DISABLE_PROXY + case CURLOPT_HTTPPROXYTUNNEL: + /* + * Tunnel operations through the proxy instead of normal proxy use + */ + data->set.tunnel_thru_httpproxy = (0 != va_arg(param, long)) ? + TRUE : FALSE; + break; + + case CURLOPT_PROXYPORT: + /* + * Explicitly set HTTP proxy port number. + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 65535)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.proxyport = arg; + break; + + case CURLOPT_PROXYAUTH: + /* + * Set HTTP Authentication type BITMASK. + */ + { + int bitcheck; + bool authbits; + unsigned long auth = va_arg(param, unsigned long); + + if(auth == CURLAUTH_NONE) { + data->set.proxyauth = auth; + break; + } + + /* the DIGEST_IE bit is only used to set a special marker, for all the + rest we need to handle it as normal DIGEST */ + data->state.authproxy.iestyle = (auth & CURLAUTH_DIGEST_IE) ? TRUE : FALSE; + + if(auth & CURLAUTH_DIGEST_IE) { + auth |= CURLAUTH_DIGEST; /* set standard digest bit */ + auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */ + } + /* switch off bits we can't support */ +#ifndef USE_NTLM + auth &= ~CURLAUTH_NTLM; /* no NTLM support */ + auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */ +#elif !defined(NTLM_WB_ENABLED) + auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */ +#endif +#ifndef USE_SPNEGO + auth &= ~CURLAUTH_NEGOTIATE; /* no Negotiate (SPNEGO) auth without + GSS-API or SSPI */ +#endif + + /* check if any auth bit lower than CURLAUTH_ONLY is still set */ + bitcheck = 0; + authbits = FALSE; + while(bitcheck < 31) { + if(auth & (1UL << bitcheck++)) { + authbits = TRUE; + break; + } + } + if(!authbits) + return CURLE_NOT_BUILT_IN; /* no supported types left! */ + + data->set.proxyauth = auth; + } + break; + + case CURLOPT_PROXY: + /* + * Set proxy server:port to use as proxy. + * + * If the proxy is set to "" (and CURLOPT_SOCKS_PROXY is set to "" or NULL) + * we explicitly say that we don't want to use a proxy + * (even though there might be environment variables saying so). + * + * Setting it to NULL, means no proxy but allows the environment variables + * to decide for us (if CURLOPT_SOCKS_PROXY setting it to NULL). + */ + result = Curl_setstropt(&data->set.str[STRING_PROXY], + va_arg(param, char *)); + break; + + case CURLOPT_PRE_PROXY: + /* + * Set proxy server:port to use as SOCKS proxy. + * + * If the proxy is set to "" or NULL we explicitly say that we don't want + * to use the socks proxy. + */ + result = Curl_setstropt(&data->set.str[STRING_PRE_PROXY], + va_arg(param, char *)); + break; + + case CURLOPT_PROXYTYPE: + /* + * Set proxy type. HTTP/HTTP_1_0/SOCKS4/SOCKS4a/SOCKS5/SOCKS5_HOSTNAME + */ + arg = va_arg(param, long); + if((arg < CURLPROXY_HTTP) || (arg > CURLPROXY_SOCKS5_HOSTNAME)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.proxytype = (curl_proxytype)arg; + break; + + case CURLOPT_PROXY_TRANSFER_MODE: + /* + * set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy + */ + switch(va_arg(param, long)) { + case 0: + data->set.proxy_transfer_mode = FALSE; + break; + case 1: + data->set.proxy_transfer_mode = TRUE; + break; + default: + /* reserve other values for future use */ + result = CURLE_UNKNOWN_OPTION; + break; + } + break; +#endif /* CURL_DISABLE_PROXY */ + + case CURLOPT_SOCKS5_AUTH: + data->set.socks5auth = va_arg(param, unsigned long); + if(data->set.socks5auth & ~(CURLAUTH_BASIC | CURLAUTH_GSSAPI)) + result = CURLE_NOT_BUILT_IN; + break; +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + case CURLOPT_SOCKS5_GSSAPI_NEC: + /* + * Set flag for NEC SOCK5 support + */ + data->set.socks5_gssapi_nec = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_SOCKS5_GSSAPI_SERVICE: + case CURLOPT_PROXY_SERVICE_NAME: + /* + * Set proxy authentication service name for Kerberos 5 and SPNEGO + */ + result = Curl_setstropt(&data->set.str[STRING_PROXY_SERVICE_NAME], + va_arg(param, char *)); + break; +#endif + +#if !defined(CURL_DISABLE_CRYPTO_AUTH) || defined(USE_KERBEROS5) || \ + defined(USE_SPNEGO) + case CURLOPT_SERVICE_NAME: + /* + * Set authentication service name for DIGEST-MD5, Kerberos 5 and SPNEGO + */ + result = Curl_setstropt(&data->set.str[STRING_SERVICE_NAME], + va_arg(param, char *)); + break; + +#endif + + case CURLOPT_HEADERDATA: + /* + * Custom pointer to pass the header write callback function + */ + data->set.writeheader = (void *)va_arg(param, void *); + break; + case CURLOPT_ERRORBUFFER: + /* + * Error buffer provided by the caller to get the human readable + * error string in. + */ + data->set.errorbuffer = va_arg(param, char *); + break; + case CURLOPT_WRITEDATA: + /* + * FILE pointer to write to. Or possibly + * used as argument to the write callback. + */ + data->set.out = va_arg(param, void *); + break; + case CURLOPT_FTPPORT: + /* + * Use FTP PORT, this also specifies which IP address to use + */ + result = Curl_setstropt(&data->set.str[STRING_FTPPORT], + va_arg(param, char *)); + data->set.ftp_use_port = (data->set.str[STRING_FTPPORT]) ? TRUE : FALSE; + break; + + case CURLOPT_FTP_USE_EPRT: + data->set.ftp_use_eprt = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_FTP_USE_EPSV: + data->set.ftp_use_epsv = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_FTP_USE_PRET: + data->set.ftp_use_pret = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_FTP_SSL_CCC: + arg = va_arg(param, long); + if((arg < CURLFTPSSL_CCC_NONE) || (arg > CURLFTPSSL_CCC_ACTIVE)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.ftp_ccc = (curl_ftpccc)arg; + break; + + case CURLOPT_FTP_SKIP_PASV_IP: + /* + * Enable or disable FTP_SKIP_PASV_IP, which will disable/enable the + * bypass of the IP address in PASV responses. + */ + data->set.ftp_skip_ip = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_READDATA: + /* + * FILE pointer to read the file to be uploaded from. Or possibly + * used as argument to the read callback. + */ + data->set.in_set = va_arg(param, void *); + break; + case CURLOPT_INFILESIZE: + /* + * If known, this should inform curl about the file size of the + * to-be-uploaded file. + */ + arg = va_arg(param, long); + if(arg < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.filesize = arg; + break; + case CURLOPT_INFILESIZE_LARGE: + /* + * If known, this should inform curl about the file size of the + * to-be-uploaded file. + */ + bigsize = va_arg(param, curl_off_t); + if(bigsize < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.filesize = bigsize; + break; + case CURLOPT_LOW_SPEED_LIMIT: + /* + * The low speed limit that if transfers are below this for + * CURLOPT_LOW_SPEED_TIME, the transfer is aborted. + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.low_speed_limit = arg; + break; + case CURLOPT_MAX_SEND_SPEED_LARGE: + /* + * When transfer uploads are faster then CURLOPT_MAX_SEND_SPEED_LARGE + * bytes per second the transfer is throttled.. + */ + bigsize = va_arg(param, curl_off_t); + if(bigsize < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.max_send_speed = bigsize; + break; + case CURLOPT_MAX_RECV_SPEED_LARGE: + /* + * When receiving data faster than CURLOPT_MAX_RECV_SPEED_LARGE bytes per + * second the transfer is throttled.. + */ + bigsize = va_arg(param, curl_off_t); + if(bigsize < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.max_recv_speed = bigsize; + break; + case CURLOPT_LOW_SPEED_TIME: + /* + * The low speed time that if transfers are below the set + * CURLOPT_LOW_SPEED_LIMIT during this time, the transfer is aborted. + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.low_speed_time = arg; + break; + case CURLOPT_URL: + /* + * The URL to fetch. + */ + if(data->change.url_alloc) { + /* the already set URL is allocated, free it first! */ + Curl_safefree(data->change.url); + data->change.url_alloc = FALSE; + } + result = Curl_setstropt(&data->set.str[STRING_SET_URL], + va_arg(param, char *)); + data->change.url = data->set.str[STRING_SET_URL]; + break; + case CURLOPT_PORT: + /* + * The port number to use when getting the URL + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 65535)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.use_port = arg; + break; + case CURLOPT_TIMEOUT: + /* + * The maximum time you allow curl to use for a single transfer + * operation. + */ + arg = va_arg(param, long); + if((arg >= 0) && (arg <= (INT_MAX/1000))) + data->set.timeout = arg * 1000; + else + return CURLE_BAD_FUNCTION_ARGUMENT; + break; + + case CURLOPT_TIMEOUT_MS: + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.timeout = arg; + break; + + case CURLOPT_CONNECTTIMEOUT: + /* + * The maximum time you allow curl to use to connect. + */ + arg = va_arg(param, long); + if((arg >= 0) && (arg <= (INT_MAX/1000))) + data->set.connecttimeout = arg * 1000; + else + return CURLE_BAD_FUNCTION_ARGUMENT; + break; + + case CURLOPT_CONNECTTIMEOUT_MS: + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.connecttimeout = arg; + break; + + case CURLOPT_ACCEPTTIMEOUT_MS: + /* + * The maximum time you allow curl to wait for server connect + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.accepttimeout = arg; + break; + + case CURLOPT_USERPWD: + /* + * user:password to use in the operation + */ + result = setstropt_userpwd(va_arg(param, char *), + &data->set.str[STRING_USERNAME], + &data->set.str[STRING_PASSWORD]); + break; + + case CURLOPT_USERNAME: + /* + * authentication user name to use in the operation + */ + result = Curl_setstropt(&data->set.str[STRING_USERNAME], + va_arg(param, char *)); + break; + + case CURLOPT_PASSWORD: + /* + * authentication password to use in the operation + */ + result = Curl_setstropt(&data->set.str[STRING_PASSWORD], + va_arg(param, char *)); + break; + + case CURLOPT_LOGIN_OPTIONS: + /* + * authentication options to use in the operation + */ + result = Curl_setstropt(&data->set.str[STRING_OPTIONS], + va_arg(param, char *)); + break; + + case CURLOPT_XOAUTH2_BEARER: + /* + * OAuth 2.0 bearer token to use in the operation + */ + result = Curl_setstropt(&data->set.str[STRING_BEARER], + va_arg(param, char *)); + break; + + case CURLOPT_POSTQUOTE: + /* + * List of RAW FTP commands to use after a transfer + */ + data->set.postquote = va_arg(param, struct curl_slist *); + break; + case CURLOPT_PREQUOTE: + /* + * List of RAW FTP commands to use prior to RETR (Wesley Laxton) + */ + data->set.prequote = va_arg(param, struct curl_slist *); + break; + case CURLOPT_QUOTE: + /* + * List of RAW FTP commands to use before a transfer + */ + data->set.quote = va_arg(param, struct curl_slist *); + break; + case CURLOPT_RESOLVE: + /* + * List of NAME:[address] names to populate the DNS cache with + * Prefix the NAME with dash (-) to _remove_ the name from the cache. + * + * Names added with this API will remain in the cache until explicitly + * removed or the handle is cleaned up. + * + * This API can remove any name from the DNS cache, but only entries + * that aren't actually in use right now will be pruned immediately. + */ + data->set.resolve = va_arg(param, struct curl_slist *); + data->change.resolve = data->set.resolve; + break; + case CURLOPT_PROGRESSFUNCTION: + /* + * Progress callback function + */ + data->set.fprogress = va_arg(param, curl_progress_callback); + if(data->set.fprogress) + data->progress.callback = TRUE; /* no longer internal */ + else + data->progress.callback = FALSE; /* NULL enforces internal */ + break; + + case CURLOPT_XFERINFOFUNCTION: + /* + * Transfer info callback function + */ + data->set.fxferinfo = va_arg(param, curl_xferinfo_callback); + if(data->set.fxferinfo) + data->progress.callback = TRUE; /* no longer internal */ + else + data->progress.callback = FALSE; /* NULL enforces internal */ + + break; + + case CURLOPT_PROGRESSDATA: + /* + * Custom client data to pass to the progress callback + */ + data->set.progress_client = va_arg(param, void *); + break; + +#ifndef CURL_DISABLE_PROXY + case CURLOPT_PROXYUSERPWD: + /* + * user:password needed to use the proxy + */ + result = setstropt_userpwd(va_arg(param, char *), + &data->set.str[STRING_PROXYUSERNAME], + &data->set.str[STRING_PROXYPASSWORD]); + break; + case CURLOPT_PROXYUSERNAME: + /* + * authentication user name to use in the operation + */ + result = Curl_setstropt(&data->set.str[STRING_PROXYUSERNAME], + va_arg(param, char *)); + break; + case CURLOPT_PROXYPASSWORD: + /* + * authentication password to use in the operation + */ + result = Curl_setstropt(&data->set.str[STRING_PROXYPASSWORD], + va_arg(param, char *)); + break; + case CURLOPT_NOPROXY: + /* + * proxy exception list + */ + result = Curl_setstropt(&data->set.str[STRING_NOPROXY], + va_arg(param, char *)); + break; +#endif + + case CURLOPT_RANGE: + /* + * What range of the file you want to transfer + */ + result = Curl_setstropt(&data->set.str[STRING_SET_RANGE], + va_arg(param, char *)); + break; + case CURLOPT_RESUME_FROM: + /* + * Resume transfer at the given file position + */ + arg = va_arg(param, long); + if(arg < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.set_resume_from = arg; + break; + case CURLOPT_RESUME_FROM_LARGE: + /* + * Resume transfer at the given file position + */ + bigsize = va_arg(param, curl_off_t); + if(bigsize < -1) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.set_resume_from = bigsize; + break; + case CURLOPT_DEBUGFUNCTION: + /* + * stderr write callback. + */ + data->set.fdebug = va_arg(param, curl_debug_callback); + /* + * if the callback provided is NULL, it'll use the default callback + */ + break; + case CURLOPT_DEBUGDATA: + /* + * Set to a void * that should receive all error writes. This + * defaults to CURLOPT_STDERR for normal operations. + */ + data->set.debugdata = va_arg(param, void *); + break; + case CURLOPT_STDERR: + /* + * Set to a FILE * that should receive all error writes. This + * defaults to stderr for normal operations. + */ + data->set.err = va_arg(param, FILE *); + if(!data->set.err) + data->set.err = stderr; + break; + case CURLOPT_HEADERFUNCTION: + /* + * Set header write callback + */ + data->set.fwrite_header = va_arg(param, curl_write_callback); + break; + case CURLOPT_WRITEFUNCTION: + /* + * Set data write callback + */ + data->set.fwrite_func = va_arg(param, curl_write_callback); + if(!data->set.fwrite_func) { + data->set.is_fwrite_set = 0; + /* When set to NULL, reset to our internal default function */ + data->set.fwrite_func = (curl_write_callback)fwrite; + } + else + data->set.is_fwrite_set = 1; + break; + case CURLOPT_READFUNCTION: + /* + * Read data callback + */ + data->set.fread_func_set = va_arg(param, curl_read_callback); + if(!data->set.fread_func_set) { + data->set.is_fread_set = 0; + /* When set to NULL, reset to our internal default function */ + data->set.fread_func_set = (curl_read_callback)fread; + } + else + data->set.is_fread_set = 1; + break; + case CURLOPT_SEEKFUNCTION: + /* + * Seek callback. Might be NULL. + */ + data->set.seek_func = va_arg(param, curl_seek_callback); + break; + case CURLOPT_SEEKDATA: + /* + * Seek control callback. Might be NULL. + */ + data->set.seek_client = va_arg(param, void *); + break; + case CURLOPT_CONV_FROM_NETWORK_FUNCTION: + /* + * "Convert from network encoding" callback + */ + data->set.convfromnetwork = va_arg(param, curl_conv_callback); + break; + case CURLOPT_CONV_TO_NETWORK_FUNCTION: + /* + * "Convert to network encoding" callback + */ + data->set.convtonetwork = va_arg(param, curl_conv_callback); + break; + case CURLOPT_CONV_FROM_UTF8_FUNCTION: + /* + * "Convert from UTF-8 encoding" callback + */ + data->set.convfromutf8 = va_arg(param, curl_conv_callback); + break; + case CURLOPT_IOCTLFUNCTION: + /* + * I/O control callback. Might be NULL. + */ + data->set.ioctl_func = va_arg(param, curl_ioctl_callback); + break; + case CURLOPT_IOCTLDATA: + /* + * I/O control data pointer. Might be NULL. + */ + data->set.ioctl_client = va_arg(param, void *); + break; + case CURLOPT_SSLCERT: + /* + * String that holds file name of the SSL certificate to use + */ + result = Curl_setstropt(&data->set.str[STRING_CERT_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_SSLCERT: + /* + * String that holds file name of the SSL certificate to use for proxy + */ + result = Curl_setstropt(&data->set.str[STRING_CERT_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_SSLCERTTYPE: + /* + * String that holds file type of the SSL certificate to use + */ + result = Curl_setstropt(&data->set.str[STRING_CERT_TYPE_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_SSLCERTTYPE: + /* + * String that holds file type of the SSL certificate to use for proxy + */ + result = Curl_setstropt(&data->set.str[STRING_CERT_TYPE_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_SSLKEY: + /* + * String that holds file name of the SSL key to use + */ + result = Curl_setstropt(&data->set.str[STRING_KEY_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_SSLKEY: + /* + * String that holds file name of the SSL key to use for proxy + */ + result = Curl_setstropt(&data->set.str[STRING_KEY_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_SSLKEYTYPE: + /* + * String that holds file type of the SSL key to use + */ + result = Curl_setstropt(&data->set.str[STRING_KEY_TYPE_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_SSLKEYTYPE: + /* + * String that holds file type of the SSL key to use for proxy + */ + result = Curl_setstropt(&data->set.str[STRING_KEY_TYPE_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_KEYPASSWD: + /* + * String that holds the SSL or SSH private key password. + */ + result = Curl_setstropt(&data->set.str[STRING_KEY_PASSWD_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_KEYPASSWD: + /* + * String that holds the SSL private key password for proxy. + */ + result = Curl_setstropt(&data->set.str[STRING_KEY_PASSWD_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_SSLENGINE: + /* + * String that holds the SSL crypto engine. + */ + argptr = va_arg(param, char *); + if(argptr && argptr[0]) + result = Curl_ssl_set_engine(data, argptr); + break; + + case CURLOPT_SSLENGINE_DEFAULT: + /* + * flag to set engine as default. + */ + result = Curl_ssl_set_engine_default(data); + break; + case CURLOPT_CRLF: + /* + * Kludgy option to enable CRLF conversions. Subject for removal. + */ + data->set.crlf = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_INTERFACE: + /* + * Set what interface or address/hostname to bind the socket to when + * performing an operation and thus what from-IP your connection will use. + */ + result = Curl_setstropt(&data->set.str[STRING_DEVICE], + va_arg(param, char *)); + break; + case CURLOPT_LOCALPORT: + /* + * Set what local port to bind the socket to when performing an operation. + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 65535)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.localport = curlx_sltous(arg); + break; + case CURLOPT_LOCALPORTRANGE: + /* + * Set number of local ports to try, starting with CURLOPT_LOCALPORT. + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 65535)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.localportrange = curlx_sltosi(arg); + break; + case CURLOPT_KRBLEVEL: + /* + * A string that defines the kerberos security level. + */ + result = Curl_setstropt(&data->set.str[STRING_KRB_LEVEL], + va_arg(param, char *)); + data->set.krb = (data->set.str[STRING_KRB_LEVEL]) ? TRUE : FALSE; + break; + case CURLOPT_GSSAPI_DELEGATION: + /* + * GSS-API credential delegation bitmask + */ + arg = va_arg(param, long); + if(arg < CURLGSSAPI_DELEGATION_NONE) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.gssapi_delegation = arg; + break; + case CURLOPT_SSL_VERIFYPEER: + /* + * Enable peer SSL verifying. + */ + data->set.ssl.primary.verifypeer = (0 != va_arg(param, long)) ? + TRUE : FALSE; + + /* Update the current connection ssl_config. */ + if(data->easy_conn) { + data->easy_conn->ssl_config.verifypeer = + data->set.ssl.primary.verifypeer; + } + break; + case CURLOPT_PROXY_SSL_VERIFYPEER: + /* + * Enable peer SSL verifying for proxy. + */ + data->set.proxy_ssl.primary.verifypeer = + (0 != va_arg(param, long))?TRUE:FALSE; + + /* Update the current connection proxy_ssl_config. */ + if(data->easy_conn) { + data->easy_conn->proxy_ssl_config.verifypeer = + data->set.proxy_ssl.primary.verifypeer; + } + break; + case CURLOPT_SSL_VERIFYHOST: + /* + * Enable verification of the host name in the peer certificate + */ + arg = va_arg(param, long); + + /* Obviously people are not reading documentation and too many thought + this argument took a boolean when it wasn't and misused it. We thus ban + 1 as a sensible input and we warn about its use. Then we only have the + 2 action internally stored as TRUE. */ + + if(1 == arg) { + failf(data, "CURLOPT_SSL_VERIFYHOST no longer supports 1 as value!"); + return CURLE_BAD_FUNCTION_ARGUMENT; + } + + data->set.ssl.primary.verifyhost = (0 != arg) ? TRUE : FALSE; + + /* Update the current connection ssl_config. */ + if(data->easy_conn) { + data->easy_conn->ssl_config.verifyhost = + data->set.ssl.primary.verifyhost; + } + break; + case CURLOPT_PROXY_SSL_VERIFYHOST: + /* + * Enable verification of the host name in the peer certificate for proxy + */ + arg = va_arg(param, long); + + /* Obviously people are not reading documentation and too many thought + this argument took a boolean when it wasn't and misused it. We thus ban + 1 as a sensible input and we warn about its use. Then we only have the + 2 action internally stored as TRUE. */ + + if(1 == arg) { + failf(data, "CURLOPT_SSL_VERIFYHOST no longer supports 1 as value!"); + return CURLE_BAD_FUNCTION_ARGUMENT; + } + + data->set.proxy_ssl.primary.verifyhost = (0 != arg)?TRUE:FALSE; + + /* Update the current connection proxy_ssl_config. */ + if(data->easy_conn) { + data->easy_conn->proxy_ssl_config.verifyhost = + data->set.proxy_ssl.primary.verifyhost; + } + break; + case CURLOPT_SSL_VERIFYSTATUS: + /* + * Enable certificate status verifying. + */ + if(!Curl_ssl_cert_status_request()) { + result = CURLE_NOT_BUILT_IN; + break; + } + + data->set.ssl.primary.verifystatus = (0 != va_arg(param, long)) ? + TRUE : FALSE; + + /* Update the current connection ssl_config. */ + if(data->easy_conn) { + data->easy_conn->ssl_config.verifystatus = + data->set.ssl.primary.verifystatus; + } + break; + case CURLOPT_SSL_CTX_FUNCTION: + /* + * Set a SSL_CTX callback + */ +#ifdef USE_SSL + if(Curl_ssl->have_ssl_ctx) + data->set.ssl.fsslctx = va_arg(param, curl_ssl_ctx_callback); + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_SSL_CTX_DATA: + /* + * Set a SSL_CTX callback parameter pointer + */ +#ifdef USE_SSL + if(Curl_ssl->have_ssl_ctx) + data->set.ssl.fsslctxp = va_arg(param, void *); + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_SSL_FALSESTART: + /* + * Enable TLS false start. + */ + if(!Curl_ssl_false_start()) { + result = CURLE_NOT_BUILT_IN; + break; + } + + data->set.ssl.falsestart = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_CERTINFO: +#ifdef USE_SSL + if(Curl_ssl->have_certinfo) + data->set.ssl.certinfo = (0 != va_arg(param, long)) ? TRUE : FALSE; + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_PINNEDPUBLICKEY: + /* + * Set pinned public key for SSL connection. + * Specify file name of the public key in DER format. + */ +#ifdef USE_SSL + if(Curl_ssl->have_pinnedpubkey) + result = Curl_setstropt(&data->set.str[STRING_SSL_PINNEDPUBLICKEY_ORIG], + va_arg(param, char *)); + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_PROXY_PINNEDPUBLICKEY: + /* + * Set pinned public key for SSL connection. + * Specify file name of the public key in DER format. + */ +#ifdef USE_SSL + if(Curl_ssl->have_pinnedpubkey) + result = Curl_setstropt(&data->set.str[STRING_SSL_PINNEDPUBLICKEY_PROXY], + va_arg(param, char *)); + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_CAINFO: + /* + * Set CA info for SSL connection. Specify file name of the CA certificate + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CAFILE_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_CAINFO: + /* + * Set CA info SSL connection for proxy. Specify file name of the + * CA certificate + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CAFILE_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_CAPATH: + /* + * Set CA path info for SSL connection. Specify directory name of the CA + * certificates which have been prepared using openssl c_rehash utility. + */ +#ifdef USE_SSL + if(Curl_ssl->have_ca_path) + /* This does not work on windows. */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CAPATH_ORIG], + va_arg(param, char *)); + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_PROXY_CAPATH: + /* + * Set CA path info for SSL connection proxy. Specify directory name of the + * CA certificates which have been prepared using openssl c_rehash utility. + */ +#ifdef USE_SSL + if(Curl_ssl->have_ca_path) + /* This does not work on windows. */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CAPATH_PROXY], + va_arg(param, char *)); + else +#endif + result = CURLE_NOT_BUILT_IN; + break; + case CURLOPT_CRLFILE: + /* + * Set CRL file info for SSL connection. Specify file name of the CRL + * to check certificates revocation + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CRLFILE_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_PROXY_CRLFILE: + /* + * Set CRL file info for SSL connection for proxy. Specify file name of the + * CRL to check certificates revocation + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_CRLFILE_PROXY], + va_arg(param, char *)); + break; + case CURLOPT_ISSUERCERT: + /* + * Set Issuer certificate file + * to check certificates issuer + */ + result = Curl_setstropt(&data->set.str[STRING_SSL_ISSUERCERT_ORIG], + va_arg(param, char *)); + break; + case CURLOPT_TELNETOPTIONS: + /* + * Set a linked list of telnet options + */ + data->set.telnet_options = va_arg(param, struct curl_slist *); + break; + + case CURLOPT_BUFFERSIZE: + /* + * The application kindly asks for a differently sized receive buffer. + * If it seems reasonable, we'll use it. + */ + arg = va_arg(param, long); + + if(arg > READBUFFER_MAX) + arg = READBUFFER_MAX; + else if(arg < 1) + arg = READBUFFER_SIZE; + else if(arg < READBUFFER_MIN) + arg = READBUFFER_MIN; + + /* Resize if new size */ + if(arg != data->set.buffer_size) { + char *newbuff = realloc(data->state.buffer, arg + 1); + if(!newbuff) { + DEBUGF(fprintf(stderr, "Error: realloc of buffer failed\n")); + result = CURLE_OUT_OF_MEMORY; + } + else + data->state.buffer = newbuff; + } + data->set.buffer_size = arg; + + break; + + case CURLOPT_NOSIGNAL: + /* + * The application asks not to set any signal() or alarm() handlers, + * even when using a timeout. + */ + data->set.no_signal = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_SHARE: + { + struct Curl_share *set; + set = va_arg(param, struct Curl_share *); + + /* disconnect from old share, if any */ + if(data->share) { + Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE); + + if(data->dns.hostcachetype == HCACHE_SHARED) { + data->dns.hostcache = NULL; + data->dns.hostcachetype = HCACHE_NONE; + } + +#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES) + if(data->share->cookies == data->cookies) + data->cookies = NULL; +#endif + + if(data->share->sslsession == data->state.session) + data->state.session = NULL; + + data->share->dirty--; + + Curl_share_unlock(data, CURL_LOCK_DATA_SHARE); + data->share = NULL; + } + + /* use new share if it set */ + data->share = set; + if(data->share) { + + Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE); + + data->share->dirty++; + + if(data->share->specifier & (1<< CURL_LOCK_DATA_DNS)) { + /* use shared host cache */ + data->dns.hostcache = &data->share->hostcache; + data->dns.hostcachetype = HCACHE_SHARED; + } +#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES) + if(data->share->cookies) { + /* use shared cookie list, first free own one if any */ + Curl_cookie_cleanup(data->cookies); + /* enable cookies since we now use a share that uses cookies! */ + data->cookies = data->share->cookies; + } +#endif /* CURL_DISABLE_HTTP */ + if(data->share->sslsession) { + data->set.general_ssl.max_ssl_sessions = data->share->max_ssl_sessions; + data->state.session = data->share->sslsession; + } + Curl_share_unlock(data, CURL_LOCK_DATA_SHARE); + + } + /* check for host cache not needed, + * it will be done by curl_easy_perform */ + } + break; + + case CURLOPT_PRIVATE: + /* + * Set private data pointer. + */ + data->set.private_data = va_arg(param, void *); + break; + + case CURLOPT_MAXFILESIZE: + /* + * Set the maximum size of a file to download. + */ + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.max_filesize = arg; + break; + +#ifdef USE_SSL + case CURLOPT_USE_SSL: + /* + * Make transfers attempt to use SSL/TLS. + */ + arg = va_arg(param, long); + if((arg < CURLUSESSL_NONE) || (arg > CURLUSESSL_ALL)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.use_ssl = (curl_usessl)arg; + break; + + case CURLOPT_SSL_OPTIONS: + arg = va_arg(param, long); + data->set.ssl.enable_beast = arg&CURLSSLOPT_ALLOW_BEAST?TRUE:FALSE; + data->set.ssl.no_revoke = !!(arg & CURLSSLOPT_NO_REVOKE); + break; + + case CURLOPT_PROXY_SSL_OPTIONS: + arg = va_arg(param, long); + data->set.proxy_ssl.enable_beast = arg&CURLSSLOPT_ALLOW_BEAST?TRUE:FALSE; + data->set.proxy_ssl.no_revoke = !!(arg & CURLSSLOPT_NO_REVOKE); + break; + +#endif + case CURLOPT_FTPSSLAUTH: + /* + * Set a specific auth for FTP-SSL transfers. + */ + arg = va_arg(param, long); + if((arg < CURLFTPAUTH_DEFAULT) || (arg > CURLFTPAUTH_TLS)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.ftpsslauth = (curl_ftpauth)arg; + break; + + case CURLOPT_IPRESOLVE: + arg = va_arg(param, long); + if((arg < CURL_IPRESOLVE_WHATEVER) || (arg > CURL_IPRESOLVE_V6)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.ipver = arg; + break; + + case CURLOPT_MAXFILESIZE_LARGE: + /* + * Set the maximum size of a file to download. + */ + bigsize = va_arg(param, curl_off_t); + if(bigsize < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.max_filesize = bigsize; + break; + + case CURLOPT_TCP_NODELAY: + /* + * Enable or disable TCP_NODELAY, which will disable/enable the Nagle + * algorithm + */ + data->set.tcp_nodelay = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_FTP_ACCOUNT: + result = Curl_setstropt(&data->set.str[STRING_FTP_ACCOUNT], + va_arg(param, char *)); + break; + + case CURLOPT_IGNORE_CONTENT_LENGTH: + data->set.ignorecl = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_CONNECT_ONLY: + /* + * No data transfer, set up connection and let application use the socket + */ + data->set.connect_only = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_FTP_ALTERNATIVE_TO_USER: + result = Curl_setstropt(&data->set.str[STRING_FTP_ALTERNATIVE_TO_USER], + va_arg(param, char *)); + break; + + case CURLOPT_SOCKOPTFUNCTION: + /* + * socket callback function: called after socket() but before connect() + */ + data->set.fsockopt = va_arg(param, curl_sockopt_callback); + break; + + case CURLOPT_SOCKOPTDATA: + /* + * socket callback data pointer. Might be NULL. + */ + data->set.sockopt_client = va_arg(param, void *); + break; + + case CURLOPT_OPENSOCKETFUNCTION: + /* + * open/create socket callback function: called instead of socket(), + * before connect() + */ + data->set.fopensocket = va_arg(param, curl_opensocket_callback); + break; + + case CURLOPT_OPENSOCKETDATA: + /* + * socket callback data pointer. Might be NULL. + */ + data->set.opensocket_client = va_arg(param, void *); + break; + + case CURLOPT_CLOSESOCKETFUNCTION: + /* + * close socket callback function: called instead of close() + * when shutting down a connection + */ + data->set.fclosesocket = va_arg(param, curl_closesocket_callback); + break; + + case CURLOPT_CLOSESOCKETDATA: + /* + * socket callback data pointer. Might be NULL. + */ + data->set.closesocket_client = va_arg(param, void *); + break; + + case CURLOPT_SSL_SESSIONID_CACHE: + data->set.ssl.primary.sessionid = (0 != va_arg(param, long)) ? + TRUE : FALSE; + data->set.proxy_ssl.primary.sessionid = data->set.ssl.primary.sessionid; + break; + +#if defined(USE_LIBSSH2) || defined(USE_LIBSSH) + /* we only include SSH options if explicitly built to support SSH */ + case CURLOPT_SSH_AUTH_TYPES: + data->set.ssh_auth_types = va_arg(param, long); + break; + + case CURLOPT_SSH_PUBLIC_KEYFILE: + /* + * Use this file instead of the $HOME/.ssh/id_dsa.pub file + */ + result = Curl_setstropt(&data->set.str[STRING_SSH_PUBLIC_KEY], + va_arg(param, char *)); + break; + + case CURLOPT_SSH_PRIVATE_KEYFILE: + /* + * Use this file instead of the $HOME/.ssh/id_dsa file + */ + result = Curl_setstropt(&data->set.str[STRING_SSH_PRIVATE_KEY], + va_arg(param, char *)); + break; + case CURLOPT_SSH_HOST_PUBLIC_KEY_MD5: + /* + * Option to allow for the MD5 of the host public key to be checked + * for validation purposes. + */ + result = Curl_setstropt(&data->set.str[STRING_SSH_HOST_PUBLIC_KEY_MD5], + va_arg(param, char *)); + break; +#ifdef HAVE_LIBSSH2_KNOWNHOST_API + case CURLOPT_SSH_KNOWNHOSTS: + /* + * Store the file name to read known hosts from. + */ + result = Curl_setstropt(&data->set.str[STRING_SSH_KNOWNHOSTS], + va_arg(param, char *)); + break; + + case CURLOPT_SSH_KEYFUNCTION: + /* setting to NULL is fine since the ssh.c functions themselves will + then rever to use the internal default */ + data->set.ssh_keyfunc = va_arg(param, curl_sshkeycallback); + break; + + case CURLOPT_SSH_KEYDATA: + /* + * Custom client data to pass to the SSH keyfunc callback + */ + data->set.ssh_keyfunc_userp = va_arg(param, void *); + break; +#endif /* HAVE_LIBSSH2_KNOWNHOST_API */ +#endif /* USE_LIBSSH2 */ + + case CURLOPT_HTTP_TRANSFER_DECODING: + /* + * disable libcurl transfer encoding is used + */ + data->set.http_te_skip = (0 == va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_HTTP_CONTENT_DECODING: + /* + * raw data passed to the application when content encoding is used + */ + data->set.http_ce_skip = (0 == va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_NEW_FILE_PERMS: + /* + * Uses these permissions instead of 0644 + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 0777)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.new_file_perms = arg; + break; + + case CURLOPT_NEW_DIRECTORY_PERMS: + /* + * Uses these permissions instead of 0755 + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 0777)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.new_directory_perms = arg; + break; + + case CURLOPT_ADDRESS_SCOPE: + /* + * We always get longs when passed plain numericals, but for this value we + * know that an unsigned int will always hold the value so we blindly + * typecast to this type + */ + arg = va_arg(param, long); + if((arg < 0) || (arg > 0xf)) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.scope_id = curlx_sltoui(arg); + break; + + case CURLOPT_PROTOCOLS: + /* set the bitmask for the protocols that are allowed to be used for the + transfer, which thus helps the app which takes URLs from users or other + external inputs and want to restrict what protocol(s) to deal + with. Defaults to CURLPROTO_ALL. */ + data->set.allowed_protocols = va_arg(param, long); + break; + + case CURLOPT_REDIR_PROTOCOLS: + /* set the bitmask for the protocols that libcurl is allowed to follow to, + as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs + to be set in both bitmasks to be allowed to get redirected to. Defaults + to all protocols except FILE and SCP. */ + data->set.redir_protocols = va_arg(param, long); + break; + + case CURLOPT_DEFAULT_PROTOCOL: + /* Set the protocol to use when the URL doesn't include any protocol */ + result = Curl_setstropt(&data->set.str[STRING_DEFAULT_PROTOCOL], + va_arg(param, char *)); + break; + + case CURLOPT_MAIL_FROM: + /* Set the SMTP mail originator */ + result = Curl_setstropt(&data->set.str[STRING_MAIL_FROM], + va_arg(param, char *)); + break; + + case CURLOPT_MAIL_AUTH: + /* Set the SMTP auth originator */ + result = Curl_setstropt(&data->set.str[STRING_MAIL_AUTH], + va_arg(param, char *)); + break; + + case CURLOPT_MAIL_RCPT: + /* Set the list of mail recipients */ + data->set.mail_rcpt = va_arg(param, struct curl_slist *); + break; + + case CURLOPT_SASL_IR: + /* Enable/disable SASL initial response */ + data->set.sasl_ir = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + + case CURLOPT_RTSP_REQUEST: + { + /* + * Set the RTSP request method (OPTIONS, SETUP, PLAY, etc...) + * Would this be better if the RTSPREQ_* were just moved into here? + */ + long curl_rtspreq = va_arg(param, long); + Curl_RtspReq rtspreq = RTSPREQ_NONE; + switch(curl_rtspreq) { + case CURL_RTSPREQ_OPTIONS: + rtspreq = RTSPREQ_OPTIONS; + break; + + case CURL_RTSPREQ_DESCRIBE: + rtspreq = RTSPREQ_DESCRIBE; + break; + + case CURL_RTSPREQ_ANNOUNCE: + rtspreq = RTSPREQ_ANNOUNCE; + break; + + case CURL_RTSPREQ_SETUP: + rtspreq = RTSPREQ_SETUP; + break; + + case CURL_RTSPREQ_PLAY: + rtspreq = RTSPREQ_PLAY; + break; + + case CURL_RTSPREQ_PAUSE: + rtspreq = RTSPREQ_PAUSE; + break; + + case CURL_RTSPREQ_TEARDOWN: + rtspreq = RTSPREQ_TEARDOWN; + break; + + case CURL_RTSPREQ_GET_PARAMETER: + rtspreq = RTSPREQ_GET_PARAMETER; + break; + + case CURL_RTSPREQ_SET_PARAMETER: + rtspreq = RTSPREQ_SET_PARAMETER; + break; + + case CURL_RTSPREQ_RECORD: + rtspreq = RTSPREQ_RECORD; + break; + + case CURL_RTSPREQ_RECEIVE: + rtspreq = RTSPREQ_RECEIVE; + break; + default: + rtspreq = RTSPREQ_NONE; + } + + data->set.rtspreq = rtspreq; + break; + } + + + case CURLOPT_RTSP_SESSION_ID: + /* + * Set the RTSP Session ID manually. Useful if the application is + * resuming a previously established RTSP session + */ + result = Curl_setstropt(&data->set.str[STRING_RTSP_SESSION_ID], + va_arg(param, char *)); + break; + + case CURLOPT_RTSP_STREAM_URI: + /* + * Set the Stream URI for the RTSP request. Unless the request is + * for generic server options, the application will need to set this. + */ + result = Curl_setstropt(&data->set.str[STRING_RTSP_STREAM_URI], + va_arg(param, char *)); + break; + + case CURLOPT_RTSP_TRANSPORT: + /* + * The content of the Transport: header for the RTSP request + */ + result = Curl_setstropt(&data->set.str[STRING_RTSP_TRANSPORT], + va_arg(param, char *)); + break; + + case CURLOPT_RTSP_CLIENT_CSEQ: + /* + * Set the CSEQ number to issue for the next RTSP request. Useful if the + * application is resuming a previously broken connection. The CSEQ + * will increment from this new number henceforth. + */ + data->state.rtsp_next_client_CSeq = va_arg(param, long); + break; + + case CURLOPT_RTSP_SERVER_CSEQ: + /* Same as the above, but for server-initiated requests */ + data->state.rtsp_next_client_CSeq = va_arg(param, long); + break; + + case CURLOPT_INTERLEAVEDATA: + data->set.rtp_out = va_arg(param, void *); + break; + case CURLOPT_INTERLEAVEFUNCTION: + /* Set the user defined RTP write function */ + data->set.fwrite_rtp = va_arg(param, curl_write_callback); + break; + + case CURLOPT_WILDCARDMATCH: + data->set.wildcard_enabled = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_CHUNK_BGN_FUNCTION: + data->set.chunk_bgn = va_arg(param, curl_chunk_bgn_callback); + break; + case CURLOPT_CHUNK_END_FUNCTION: + data->set.chunk_end = va_arg(param, curl_chunk_end_callback); + break; + case CURLOPT_FNMATCH_FUNCTION: + data->set.fnmatch = va_arg(param, curl_fnmatch_callback); + break; + case CURLOPT_CHUNK_DATA: + data->wildcard.customptr = va_arg(param, void *); + break; + case CURLOPT_FNMATCH_DATA: + data->set.fnmatch_data = va_arg(param, void *); + break; +#ifdef USE_TLS_SRP + case CURLOPT_TLSAUTH_USERNAME: + result = Curl_setstropt(&data->set.str[STRING_TLSAUTH_USERNAME_ORIG], + va_arg(param, char *)); + if(data->set.str[STRING_TLSAUTH_USERNAME_ORIG] && !data->set.ssl.authtype) + data->set.ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */ + break; + case CURLOPT_PROXY_TLSAUTH_USERNAME: + result = Curl_setstropt(&data->set.str[STRING_TLSAUTH_USERNAME_PROXY], + va_arg(param, char *)); + if(data->set.str[STRING_TLSAUTH_USERNAME_PROXY] && + !data->set.proxy_ssl.authtype) + data->set.proxy_ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */ + break; + case CURLOPT_TLSAUTH_PASSWORD: + result = Curl_setstropt(&data->set.str[STRING_TLSAUTH_PASSWORD_ORIG], + va_arg(param, char *)); + if(data->set.str[STRING_TLSAUTH_USERNAME_ORIG] && !data->set.ssl.authtype) + data->set.ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */ + break; + case CURLOPT_PROXY_TLSAUTH_PASSWORD: + result = Curl_setstropt(&data->set.str[STRING_TLSAUTH_PASSWORD_PROXY], + va_arg(param, char *)); + if(data->set.str[STRING_TLSAUTH_USERNAME_PROXY] && + !data->set.proxy_ssl.authtype) + data->set.proxy_ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */ + break; + case CURLOPT_TLSAUTH_TYPE: + argptr = va_arg(param, char *); + if(!argptr || + strncasecompare(argptr, "SRP", strlen("SRP"))) + data->set.ssl.authtype = CURL_TLSAUTH_SRP; + else + data->set.ssl.authtype = CURL_TLSAUTH_NONE; + break; + case CURLOPT_PROXY_TLSAUTH_TYPE: + argptr = va_arg(param, char *); + if(!argptr || + strncasecompare(argptr, "SRP", strlen("SRP"))) + data->set.proxy_ssl.authtype = CURL_TLSAUTH_SRP; + else + data->set.proxy_ssl.authtype = CURL_TLSAUTH_NONE; + break; +#endif + case CURLOPT_DNS_SERVERS: + result = Curl_set_dns_servers(data, va_arg(param, char *)); + break; + case CURLOPT_DNS_INTERFACE: + result = Curl_set_dns_interface(data, va_arg(param, char *)); + break; + case CURLOPT_DNS_LOCAL_IP4: + result = Curl_set_dns_local_ip4(data, va_arg(param, char *)); + break; + case CURLOPT_DNS_LOCAL_IP6: + result = Curl_set_dns_local_ip6(data, va_arg(param, char *)); + break; + + case CURLOPT_TCP_KEEPALIVE: + data->set.tcp_keepalive = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_TCP_KEEPIDLE: + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.tcp_keepidle = arg; + break; + case CURLOPT_TCP_KEEPINTVL: + arg = va_arg(param, long); + if(arg < 0) + return CURLE_BAD_FUNCTION_ARGUMENT; + data->set.tcp_keepintvl = arg; + break; + case CURLOPT_TCP_FASTOPEN: +#if defined(CONNECT_DATA_IDEMPOTENT) || defined(MSG_FASTOPEN) || \ + defined(TCP_FASTOPEN_CONNECT) + data->set.tcp_fastopen = (0 != va_arg(param, long))?TRUE:FALSE; +#else + result = CURLE_NOT_BUILT_IN; +#endif + break; + case CURLOPT_SSL_ENABLE_NPN: + data->set.ssl_enable_npn = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_SSL_ENABLE_ALPN: + data->set.ssl_enable_alpn = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + +#ifdef USE_UNIX_SOCKETS + case CURLOPT_UNIX_SOCKET_PATH: + data->set.abstract_unix_socket = FALSE; + result = Curl_setstropt(&data->set.str[STRING_UNIX_SOCKET_PATH], + va_arg(param, char *)); + break; + case CURLOPT_ABSTRACT_UNIX_SOCKET: + data->set.abstract_unix_socket = TRUE; + result = Curl_setstropt(&data->set.str[STRING_UNIX_SOCKET_PATH], + va_arg(param, char *)); + break; +#endif + + case CURLOPT_PATH_AS_IS: + data->set.path_as_is = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_PIPEWAIT: + data->set.pipewait = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLOPT_STREAM_WEIGHT: +#ifndef USE_NGHTTP2 + return CURLE_NOT_BUILT_IN; +#else + arg = va_arg(param, long); + if((arg >= 1) && (arg <= 256)) + data->set.stream_weight = (int)arg; + break; +#endif + case CURLOPT_STREAM_DEPENDS: + case CURLOPT_STREAM_DEPENDS_E: + { +#ifndef USE_NGHTTP2 + return CURLE_NOT_BUILT_IN; +#else + struct Curl_easy *dep = va_arg(param, struct Curl_easy *); + if(!dep || GOOD_EASY_HANDLE(dep)) { + if(data->set.stream_depends_on) { + Curl_http2_remove_child(data->set.stream_depends_on, data); + } + Curl_http2_add_child(dep, data, (option == CURLOPT_STREAM_DEPENDS_E)); + } + break; +#endif + } + case CURLOPT_CONNECT_TO: + data->set.connect_to = va_arg(param, struct curl_slist *); + break; + case CURLOPT_SUPPRESS_CONNECT_HEADERS: + data->set.suppress_connect_headers = (0 != va_arg(param, long))?TRUE:FALSE; + break; + case CURLOPT_SSH_COMPRESSION: + data->set.ssh_compression = (0 != va_arg(param, long))?TRUE:FALSE; + break; + default: + /* unknown tag and its companion, just ignore: */ + result = CURLE_UNKNOWN_OPTION; + break; + } + + return result; +} + +/* + * curl_easy_setopt() is the external interface for setting options on an + * easy handle. + */ + +#undef curl_easy_setopt +CURLcode curl_easy_setopt(struct Curl_easy *data, CURLoption tag, ...) +{ + va_list arg; + CURLcode result; + + if(!data) + return CURLE_BAD_FUNCTION_ARGUMENT; + + va_start(arg, tag); + + result = Curl_vsetopt(data, tag, arg); + + va_end(arg); + return result; +} |