diff options
Diffstat (limited to 'Tests/CustomCommand/CMakeLists.txt')
| -rw-r--r-- | Tests/CustomCommand/CMakeLists.txt | 156 |
1 files changed, 78 insertions, 78 deletions
diff --git a/Tests/CustomCommand/CMakeLists.txt b/Tests/CustomCommand/CMakeLists.txt index b7c9ea268..d3ced3ff9 100644 --- a/Tests/CustomCommand/CMakeLists.txt +++ b/Tests/CustomCommand/CMakeLists.txt @@ -2,22 +2,22 @@ # Wrapping # cmake_minimum_required (VERSION 2.6) -PROJECT (CustomCommand) +project (CustomCommand) -ADD_SUBDIRECTORY(GeneratedHeader) +add_subdirectory(GeneratedHeader) # # Lib and exe path # -IF(NOT DEFINED bin_dir) - SET(bin_dir "bin") -ENDIF() +if(NOT DEFINED bin_dir) + set(bin_dir "bin") +endif() -SET (LIBRARY_OUTPUT_PATH +set (LIBRARY_OUTPUT_PATH ${PROJECT_BINARY_DIR}/${bin_dir} CACHE INTERNAL "Single output directory for building all libraries.") -SET (EXECUTABLE_OUTPUT_PATH +set (EXECUTABLE_OUTPUT_PATH ${PROJECT_BINARY_DIR}/${bin_dir} CACHE INTERNAL "Single output directory for building all executables.") @@ -27,10 +27,10 @@ SET (EXECUTABLE_OUTPUT_PATH # ################################################################ # add the executable that will generate the file -ADD_EXECUTABLE(generator generator.cxx) +add_executable(generator generator.cxx) -GET_TARGET_PROPERTY(generator_PATH generator LOCATION) -MESSAGE("Location ${generator_PATH}") +get_target_property(generator_PATH generator LOCATION) +message("Location ${generator_PATH}") ################################################################ # @@ -38,9 +38,9 @@ MESSAGE("Location ${generator_PATH}") # ################################################################ # add the executable that will generate the file -ADD_EXECUTABLE(wrapper wrapper.cxx) +add_executable(wrapper wrapper.cxx) -ADD_CUSTOM_COMMAND( +add_custom_command( OUTPUT ${PROJECT_BINARY_DIR}/wrapped.c ${PROJECT_BINARY_DIR}/wrapped_help.c DEPENDS wrapper MAIN_DEPENDENCY ${PROJECT_SOURCE_DIR}/wrapped.h @@ -55,19 +55,19 @@ ADD_CUSTOM_COMMAND( # Test creating files from a custom target # ################################################################ -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}//doc1.dvi # test 2 slashes - DEPENDS ${PROJECT_SOURCE_DIR}/doc1.tex - COMMAND ${CMAKE_COMMAND} - ARGS -E copy ${PROJECT_SOURCE_DIR}/doc1.tex +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}//doc1.dvi # test 2 slashes + DEPENDS ${PROJECT_SOURCE_DIR}/doc1.tex + COMMAND ${CMAKE_COMMAND} + ARGS -E copy ${PROJECT_SOURCE_DIR}/doc1.tex ${PROJECT_BINARY_DIR}/doc1.dvi ) -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/doc1.h +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/doc1.h COMMAND ${CMAKE_COMMAND} -E echo " Copying doc1.dvi to doc1temp.h." COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_BINARY_DIR}/doc1.dvi ${PROJECT_BINARY_DIR}/doc1temp.h ) -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/doc1.h APPEND +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/doc1.h APPEND DEPENDS ${PROJECT_BINARY_DIR}/doc1.dvi COMMAND ${CMAKE_COMMAND} -E echo " Copying doc1temp.h to doc1.h." COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_BINARY_DIR}/doc1temp.h @@ -77,7 +77,7 @@ ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/doc1.h APPEND ) # Add custom command to generate foo.h. -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/foo.h +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/foo.h DEPENDS ${PROJECT_SOURCE_DIR}/foo.h.in COMMAND ${CMAKE_COMMAND} -E echo " Copying foo.h.in to foo.h." COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_SOURCE_DIR}/foo.h.in @@ -85,12 +85,12 @@ ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/foo.h ) # Add the location of foo.h to the include path. -INCLUDE_DIRECTORIES(${PROJECT_BINARY_DIR}) +include_directories(${PROJECT_BINARY_DIR}) # Test generation of a file to the build tree without full path. As # of CMake 2.6 custom command outputs specified by relative path go in # the build tree. -ADD_CUSTOM_COMMAND( +add_custom_command( OUTPUT doc1.txt COMMAND ${CMAKE_COMMAND} -E echo "Example Document Target" > doc1.txt DEPENDS doc1.tex @@ -98,7 +98,7 @@ ADD_CUSTOM_COMMAND( ) # Add a custom target to drive generation of doc1.h. -ADD_CUSTOM_TARGET(TDocument ALL +add_custom_target(TDocument ALL COMMAND ${CMAKE_COMMAND} -E echo " Copying doc1.h to doc2.h." COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_BINARY_DIR}/doc1.h ${PROJECT_BINARY_DIR}/doc2.h @@ -109,13 +109,13 @@ ADD_CUSTOM_TARGET(TDocument ALL # Setup a pre- and post-build pair that will fail if not run in the # proper order. -ADD_CUSTOM_COMMAND( +add_custom_command( TARGET TDocument PRE_BUILD COMMAND ${CMAKE_COMMAND} -E echo " Writing doc1pre.txt." COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_SOURCE_DIR}/doc1.tex ${PROJECT_BINARY_DIR}/doc1pre.txt COMMENT "Running TDocument pre-build commands" ) -ADD_CUSTOM_COMMAND( +add_custom_command( TARGET TDocument POST_BUILD COMMAND ${CMAKE_COMMAND} -E echo " Copying doc1pre.txt to doc2post.txt." COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_BINARY_DIR}/doc1pre.txt @@ -128,16 +128,16 @@ ADD_CUSTOM_COMMAND( # Test using a multistep generated file # ################################################################ -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/foo.pre +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/foo.pre DEPENDS ${PROJECT_SOURCE_DIR}/foo.in TDocument # Ensure doc1.h generates before this target - COMMAND ${CMAKE_COMMAND} - ARGS -E copy ${PROJECT_SOURCE_DIR}/foo.in + COMMAND ${CMAKE_COMMAND} + ARGS -E copy ${PROJECT_SOURCE_DIR}/foo.in ${PROJECT_BINARY_DIR}/foo.pre ) -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/foo.c - DEPENDS ${PROJECT_BINARY_DIR}/foo.pre +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/foo.c + DEPENDS ${PROJECT_BINARY_DIR}/foo.pre COMMAND ${CMAKE_COMMAND} ARGS -E copy ${PROJECT_BINARY_DIR}/foo.pre ${PROJECT_BINARY_DIR}/foo.c @@ -147,21 +147,21 @@ ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/foo.c # file that is not included by any source in this project. This will # test whether all custom command outputs explicitly listed as sources # get generated even if they are not needed by an object file. -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/not_included.h +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/not_included.h DEPENDS ${PROJECT_SOURCE_DIR}/foo.h.in COMMAND ${CMAKE_COMMAND} -E copy ${PROJECT_SOURCE_DIR}/foo.h.in ${PROJECT_BINARY_DIR}/not_included.h ) # Tell the executable where to find not_included.h. -CONFIGURE_FILE( +configure_file( ${PROJECT_SOURCE_DIR}/config.h.in ${PROJECT_BINARY_DIR}/config.h @ONLY IMMEDIATE ) # add the executable -ADD_EXECUTABLE(CustomCommand +add_executable(CustomCommand ${PROJECT_BINARY_DIR}/foo.h ${PROJECT_BINARY_DIR}/foo.c ${PROJECT_BINARY_DIR}/wrapped.c @@ -174,44 +174,44 @@ ADD_EXECUTABLE(CustomCommand # Add the rule to create generated.c at build time. This is placed # here to test adding the generation rule after referencing the # generated source in a target. -ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/generated.c +add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/generated.c DEPENDS generator COMMAND ${generator_PATH} ARGS ${PROJECT_BINARY_DIR}/generated.c ) -TARGET_LINK_LIBRARIES(CustomCommand GeneratedHeader) +target_link_libraries(CustomCommand GeneratedHeader) ############################################################################## # Test for using just the target name as executable in the COMMAND # section. Has to be recognized and replaced by CMake with the output # actual location of the executable. -# Additionally the generator is created in an extra subdir after the -# ADD_CUSTOM_COMMAND() is used. +# Additionally the generator is created in an extra subdir after the +# add_custom_command() is used. # -# Test the same for ADD_CUSTOM_TARGET() +# Test the same for add_custom_target() -ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/generated_extern.cxx +add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/generated_extern.cxx COMMAND generator_extern ${CMAKE_CURRENT_BINARY_DIR}/generated_extern.cxx ) -ADD_EXECUTABLE(CustomCommandUsingTargetTest main.cxx ${CMAKE_CURRENT_BINARY_DIR}/generated_extern.cxx ) +add_executable(CustomCommandUsingTargetTest main.cxx ${CMAKE_CURRENT_BINARY_DIR}/generated_extern.cxx ) -ADD_CUSTOM_TARGET(RunTarget +add_custom_target(RunTarget COMMAND generator_extern ${CMAKE_CURRENT_BINARY_DIR}/run_target.cxx ) -ADD_CUSTOM_COMMAND(TARGET CustomCommandUsingTargetTest POST_BUILD +add_custom_command(TARGET CustomCommandUsingTargetTest POST_BUILD COMMAND dummy_generator ${CMAKE_CURRENT_BINARY_DIR}/generated_dummy.cxx) -ADD_SUBDIRECTORY(GeneratorInExtraDir) +add_subdirectory(GeneratorInExtraDir) ############################################################################## # Test shell operators in custom commands. -ADD_EXECUTABLE(tcat tcat.cxx) +add_executable(tcat tcat.cxx) -ADD_CUSTOM_COMMAND(OUTPUT gen_redirect.c +add_custom_command(OUTPUT gen_redirect.c DEPENDS tcat gen_redirect_in.c COMMAND tcat < ${CMAKE_CURRENT_SOURCE_DIR}/gen_redirect_in.c > gen_redirect.c COMMAND ${CMAKE_COMMAND} -E echo "#endif" >> gen_redirect.c @@ -220,12 +220,12 @@ ADD_CUSTOM_COMMAND(OUTPUT gen_redirect.c ############################################################################## # Test non-trivial command line arguments in custom commands. -SET(EXPECTED_ARGUMENTS) -SET(CHECK_ARGS) -IF(NOT MSVC71) - SET(CHECK_ARGS -DPATH=c:/posix/path) -ENDIF() -SET(CHECK_ARGS +set(EXPECTED_ARGUMENTS) +set(CHECK_ARGS) +if(NOT MSVC71) + set(CHECK_ARGS -DPATH=c:/posix/path) +endif() +set(CHECK_ARGS ${CHECK_ARGS} c:/posix/path c:\\windows\\path @@ -333,11 +333,11 @@ SET(CHECK_ARGS "one#pound w s" ~ ` ! @ \# $ % ^ & _ - + = : "\;" \" ' , . ? "(" ")" { } [] ) -IF(NOT MINGW) +if(NOT MINGW) # * # MinGW programs on windows always expands the wildcard! # / # MSys make converts a leading slash to the mingw home directory - LIST(APPEND CHECK_ARGS * /) -ENDIF(NOT MINGW) + list(APPEND CHECK_ARGS * /) +endif() # The windows command shell does not support a double quote by itself: # double\"quote @@ -352,25 +352,25 @@ ENDIF(NOT MINGW) # | < > << >> &> 2>&1 1>&2 # to allow custom commands to perform redirection. -FOREACH(arg ${CHECK_ARGS} "") - SET(ARG "${arg}") - STRING(REGEX REPLACE "\\\\" "\\\\\\\\" ARG "${ARG}") - STRING(REGEX REPLACE "\"" "\\\\\"" ARG "${ARG}") - SET(EXPECTED_ARGUMENTS +foreach(arg ${CHECK_ARGS} "") + set(ARG "${arg}") + string(REGEX REPLACE "\\\\" "\\\\\\\\" ARG "${ARG}") + string(REGEX REPLACE "\"" "\\\\\"" ARG "${ARG}") + set(EXPECTED_ARGUMENTS "${EXPECTED_ARGUMENTS} \"${ARG}\", ") -ENDFOREACH(arg) -CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/check_command_line.c.in +endforeach() +configure_file(${CMAKE_CURRENT_SOURCE_DIR}/check_command_line.c.in ${CMAKE_CURRENT_BINARY_DIR}/check_command_line.c @ONLY IMMEDIATE) -ADD_EXECUTABLE(check_command_line +add_executable(check_command_line ${CMAKE_CURRENT_BINARY_DIR}/check_command_line.c) -SET(output_name "check_command_line") -SET_PROPERTY(TARGET check_command_line +set(output_name "check_command_line") +set_property(TARGET check_command_line PROPERTY OUTPUT_NAME ${output_name}) -# SET_TARGET_PROPERTIES(check_command_line PROPERTIES +# set_target_properties(check_command_line PROPERTIES # COMPILE_FLAGS -DCHECK_COMMAND_LINE_VERBOSE) -ADD_CUSTOM_COMMAND( +add_custom_command( OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/command_line_check COMMAND ${CMAKE_COMMAND} -DMARK_FILE=${CMAKE_CURRENT_BINARY_DIR}/check_mark.txt -P ${CMAKE_CURRENT_SOURCE_DIR}/check_mark.cmake @@ -379,9 +379,9 @@ ADD_CUSTOM_COMMAND( VERBATIM COMMENT "Checking custom command line escapes (single'quote)" ) -SET_SOURCE_FILES_PROPERTIES(${CMAKE_CURRENT_BINARY_DIR}/command_line_check +set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/command_line_check PROPERTIES SYMBOLIC 1) -ADD_CUSTOM_TARGET(do_check_command_line ALL +add_custom_target(do_check_command_line ALL DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/command_line_check COMMAND ${CMAKE_COMMAND} -E echo "Checking custom target command escapes" COMMAND ${EXECUTABLE_OUTPUT_PATH}/${CMAKE_CFG_INTDIR}/${output_name} @@ -389,12 +389,12 @@ ADD_CUSTOM_TARGET(do_check_command_line ALL VERBATIM COMMENT "Checking custom target command line escapes ($dollar-signs$)" ) -ADD_DEPENDENCIES(do_check_command_line check_command_line) +add_dependencies(do_check_command_line check_command_line) -ADD_CUSTOM_TARGET(pre_check_command_line +add_custom_target(pre_check_command_line COMMAND ${CMAKE_COMMAND} -E remove ${CMAKE_CURRENT_BINARY_DIR}/check_mark.txt ) -ADD_DEPENDENCIES(do_check_command_line pre_check_command_line) +add_dependencies(do_check_command_line pre_check_command_line) # <SameNameTest> # @@ -405,34 +405,34 @@ ADD_DEPENDENCIES(do_check_command_line pre_check_command_line) # At first, this reproduces a bug reported by a customer. After fixing it, # having this test here makes sure it stays fixed moving forward. # -ADD_CUSTOM_COMMAND( +add_custom_command( OUTPUT SameName1.txt COMMAND ${CMAKE_COMMAND} -E touch SameName1.txt ) -ADD_CUSTOM_TARGET(SameName ALL +add_custom_target(SameName ALL DEPENDS SameName1.txt ) -ADD_CUSTOM_COMMAND( +add_custom_command( OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/subdir/SameName COMMAND ${CMAKE_COMMAND} -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/subdir COMMAND ${CMAKE_COMMAND} -E touch ${CMAKE_CURRENT_BINARY_DIR}/subdir/SameName ) -ADD_CUSTOM_TARGET(DifferentName ALL +add_custom_target(DifferentName ALL DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/subdir/SameName ) # # </SameNameTest> # Per-config target name and generator expressions. -ADD_SUBDIRECTORY(${CMAKE_CURRENT_SOURCE_DIR}/../PerConfig PerConfig) -ADD_CUSTOM_COMMAND( +add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/../PerConfig PerConfig) +add_custom_command( OUTPUT perconfig.out COMMAND ${PerConfig_COMMAND} DEPENDS ${PerConfig_DEPENDS} VERBATIM ) -SET_PROPERTY(SOURCE perconfig.out PROPERTY SYMBOLIC 1) -ADD_CUSTOM_TARGET(perconfig_target ALL +set_property(SOURCE perconfig.out PROPERTY SYMBOLIC 1) +add_custom_target(perconfig_target ALL COMMAND ${CMAKE_COMMAND} -E echo "perconfig=$<TARGET_FILE:perconfig>" "config=$<CONFIGURATION>" DEPENDS perconfig.out) |