diff options
Diffstat (limited to 'Modules/CPackRPM.cmake')
| -rw-r--r-- | Modules/CPackRPM.cmake | 925 |
1 files changed, 925 insertions, 0 deletions
diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake new file mode 100644 index 000000000..ae9351273 --- /dev/null +++ b/Modules/CPackRPM.cmake @@ -0,0 +1,925 @@ +##section Variables specific to CPack RPM generator +##end +##module +# - The builtin (binary) CPack RPM generator (Unix only) +# CPackRPM may be used to create RPM package using CPack. +# CPackRPM is a CPack generator thus it uses the CPACK_XXX variables +# used by CPack : http://www.cmake.org/Wiki/CMake:CPackConfiguration +# +# However CPackRPM has specific features which are controlled by +# the specifics CPACK_RPM_XXX variables. CPackRPM is a component aware +# generator so when CPACK_RPM_COMPONENT_INSTALL is ON some more +# CPACK_RPM_<ComponentName>_XXXX variables may be used in order +# to have component specific values. Note however that <componentName> +# refers to the **grouping name**. This may be either a component name +# or a component GROUP name. +# Usually those vars correspond to RPM spec file entities, one may find +# information about spec files here http://www.rpm.org/wiki/Docs. +# You'll find a detailed usage of CPackRPM on the wiki: +# http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29 +# However as a handy reminder here comes the list of specific variables: +##end +# +##variable +# CPACK_RPM_PACKAGE_SUMMARY - The RPM package summary. +# Mandatory : YES +# Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY +##end +##variable +# CPACK_RPM_PACKAGE_NAME - The RPM package name. +# Mandatory : YES +# Default : CPACK_PACKAGE_NAME +##end +##variable +# CPACK_RPM_PACKAGE_VERSION - The RPM package version. +# Mandatory : YES +# Default : CPACK_PACKAGE_VERSION +##end +##variable +# CPACK_RPM_PACKAGE_ARCHITECTURE - The RPM package architecture. +# Mandatory : NO +# Default : - +# This may be set to "noarch" if you +# know you are building a noarch package. +##end +##variable +# CPACK_RPM_PACKAGE_RELEASE - The RPM package release. +# Mandatory : YES +# Default : 1 +# This is the numbering of the RPM package +# itself, i.e. the version of the packaging and not the version of the +# content (see CPACK_RPM_PACKAGE_VERSION). One may change the default +# value if the previous packaging was buggy and/or you want to put here +# a fancy Linux distro specific numbering. +##end +##variable +# CPACK_RPM_PACKAGE_LICENSE - The RPM package license policy. +# Mandatory : YES +# Default : "unknown" +##end +##variable +# CPACK_RPM_PACKAGE_GROUP - The RPM package group. +# Mandatory : YES +# Default : "unknown" +##end +##variable +# CPACK_RPM_PACKAGE_VENDOR - The RPM package vendor. +# Mandatory : YES +# Default : CPACK_PACKAGE_VENDOR if set or "unknown" +##end +##variable +# CPACK_RPM_PACKAGE_URL - The projects URL. +# Mandatory : NO +# Default : - +##end +##variable +# CPACK_RPM_PACKAGE_DESCRIPTION - RPM package description. +# Mandatory : YES +# Default : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package description available" +##end +##variable +# CPACK_RPM_COMPRESSION_TYPE - RPM compression type. +# Mandatory : NO +# Default : - +# May be used to override RPM compression type to be used +# to build the RPM. For example some Linux distribution now default +# to lzma or xz compression whereas older cannot use such RPM. +# Using this one can enforce compression type to be used. +# Possible value are: lzma, xz, bzip2 and gzip. +##end +##variable +# CPACK_RPM_PACKAGE_REQUIRES - RPM spec requires field. +# Mandatory : NO +# Default : - +# May be used to set RPM dependencies (requires). +# Note that you must enclose the complete requires string between quotes, +# for example: +# set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8") +# The required package list of an RPM file could be printed with +# rpm -qp --requires file.rpm +##end +##variable +# CPACK_RPM_PACKAGE_SUGGESTS - RPM spec suggest field. +# Mandatory : NO +# Default : - +# May be used to set weak RPM dependencies (suggests). +# Note that you must enclose the complete requires string between quotes. +##end +##variable +# CPACK_RPM_PACKAGE_PROVIDES - RPM spec provides field. +# Mandatory : NO +# Default : - +# May be used to set RPM dependencies (provides). +# The provided package list of an RPM file could be printed with +# rpm -qp --provides file.rpm +##end +##variable +# CPACK_RPM_PACKAGE_OBSOLETES - RPM spec obsoletes field. +# Mandatory : NO +# Default : - +# May be used to set RPM packages that are obsoleted by this one. +##end +##variable +# CPACK_RPM_PACKAGE_RELOCATABLE - build a relocatable RPM. +# Mandatory : NO +# Default : CPACK_PACKAGE_RELOCATABLE +# If this variable is set to TRUE or ON CPackRPM will try +# to build a relocatable RPM package. A relocatable RPM may +# be installed using rpm --prefix or --relocate in order to +# install it at an alternate place see rpm(8). +# Note that currently this may fail if CPACK_SET_DESTDIR is set to ON. +# If CPACK_SET_DESTDIR is set then you will get a warning message +# but if there is file installed with absolute path you'll get +# unexpected behavior. +##end +##variable +# CPACK_RPM_SPEC_INSTALL_POST - [deprecated]. +# Mandatory : NO +# Default : - +# This way of specifying post-install script is deprecated use +# CPACK_RPM_POST_INSTALL_SCRIPT_FILE +# May be used to set an RPM post-install command inside the spec file. +# For example setting it to "/bin/true" may be used to prevent +# rpmbuild to strip binaries. +##end +##variable +# CPACK_RPM_SPEC_MORE_DEFINE - RPM extended spec definitions lines. +# Mandatory : NO +# Default : - +# May be used to add any %define lines to the generated spec file. +##end +##variable +# CPACK_RPM_PACKAGE_DEBUG - Toggle CPackRPM debug output. +# Mandatory : NO +# Default : - +# May be set when invoking cpack in order to trace debug information +# during CPack RPM run. For example you may launch CPack like this +# cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM +##end +##variable +# CPACK_RPM_USER_BINARY_SPECFILE - A user provided spec file. +# Mandatory : NO +# Default : - +# May be set by the user in order to specify a USER binary spec file +# to be used by CPackRPM instead of generating the file. +# The specified file will be processed by CONFIGURE_FILE( @ONLY). +##end +##variable +# CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE - Spec file template. +# Mandatory : NO +# Default : - +# If set CPack will generate a template for USER specified binary +# spec file and stop with an error. For example launch CPack like this +# cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM +# The user may then use this file in order to hand-craft is own +# binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE. +##end +##variable +# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE +# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE +# Mandatory : NO +# Default : - +# May be used to embed a pre (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %pre or %preun section +# If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for +# each component can be overridden with +# CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE and +# CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE +# One may verify which scriptlet has been included with +# rpm -qp --scripts package.rpm +##end +##variable +# CPACK_RPM_POST_INSTALL_SCRIPT_FILE +# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE +# Mandatory : NO +# Default : - +# May be used to embed a post (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %post or %postun section +# If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for +# each component can be overridden with +# CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE and +# CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE +# One may verify which scriptlet has been included with +# rpm -qp --scripts package.rpm +##end +##variable +# CPACK_RPM_USER_FILELIST +# CPACK_RPM_<COMPONENT>_USER_FILELIST +# Mandatory : NO +# Default : - +# May be used to explicitly specify %(<directive>) file line +# in the spec file. Like %config(noreplace) or any other directive +# that be found in the %files section. Since CPackRPM is generating +# the list of files (and directories) the user specified files of +# the CPACK_RPM_<COMPONENT>_USER_FILELIST list will be removed from the generated list. +##end +##variable +# CPACK_RPM_CHANGELOG_FILE - RPM changelog file. +# Mandatory : NO +# Default : - +# May be used to embed a changelog in the spec file. +# The refered file will be read and directly put after the %changelog +# section. +##end + +#============================================================================= +# Copyright 2007-2009 Kitware, Inc. +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distribute this file outside of CMake, substitute the full +# License text for the above reference.) + +# Author: Eric Noulard with the help of Alexander Neundorf. + +IF(CMAKE_BINARY_DIR) + MESSAGE(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.") +ENDIF(CMAKE_BINARY_DIR) + +IF(NOT UNIX) + MESSAGE(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.") +ENDIF(NOT UNIX) + +# rpmbuild is the basic command for building RPM package +# it may be a simple (symbolic) link to rpm command. +FIND_PROGRAM(RPMBUILD_EXECUTABLE rpmbuild) + +# Check version of the rpmbuild tool this would be easier to +# track bugs with users and CPackRPM debug mode. +# We may use RPM version in order to check for available version dependent features +IF(RPMBUILD_EXECUTABLE) + execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version + OUTPUT_VARIABLE _TMP_VERSION + ERROR_QUIET + OUTPUT_STRIP_TRAILING_WHITESPACE) + string(REGEX REPLACE "^.*\ " "" + RPMBUILD_EXECUTABLE_VERSION + ${_TMP_VERSION}) + IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) +ENDIF(RPMBUILD_EXECUTABLE) + +IF(NOT RPMBUILD_EXECUTABLE) + MESSAGE(FATAL_ERROR "RPM package requires rpmbuild executable") +ENDIF(NOT RPMBUILD_EXECUTABLE) + +# Display lsb_release output if DEBUG mode enable +# This will help to diagnose problem with CPackRPM +# because we will know on which kind of Linux we are +IF(CPACK_RPM_PACKAGE_DEBUG) + find_program(LSB_RELEASE_EXECUTABLE lsb_release) + if(LSB_RELEASE_EXECUTABLE) + execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a + OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT + ERROR_QUIET + OUTPUT_STRIP_TRAILING_WHITESPACE) + string(REGEX REPLACE "\n" ", " + LSB_RELEASE_OUTPUT + ${_TMP_LSB_RELEASE_OUTPUT}) + else (LSB_RELEASE_EXECUTABLE) + set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") + endif(LSB_RELEASE_EXECUTABLE) + MESSAGE("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") +ENDIF(CPACK_RPM_PACKAGE_DEBUG) + +# We may use RPM version in the future in order +# to shut down warning about space in buildtree +# some recent RPM version should support space in different places. +# not checked [yet]. +IF(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") + MESSAGE(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") +ENDIF(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") + +# If rpmbuild is found +# we try to discover alien since we may be on non RPM distro like Debian. +# In this case we may try to to use more advanced features +# like generating RPM directly from DEB using alien. +# FIXME feature not finished (yet) +FIND_PROGRAM(ALIEN_EXECUTABLE alien) +IF(ALIEN_EXECUTABLE) + MESSAGE(STATUS "alien found, we may be on a Debian based distro.") +ENDIF(ALIEN_EXECUTABLE) + +# Are we packaging components ? +IF(CPACK_RPM_PACKAGE_COMPONENT) + SET(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") + SET(CPACK_RPM_PACKAGE_COMPONENT_PART_PATH "/${CPACK_RPM_PACKAGE_COMPONENT}") + SET(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}/${CPACK_RPM_PACKAGE_COMPONENT}") +ELSE(CPACK_RPM_PACKAGE_COMPONENT) + SET(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") + SET(CPACK_RPM_PACKAGE_COMPONENT_PART_PATH "") + SET(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}") +ENDIF(CPACK_RPM_PACKAGE_COMPONENT) + +# +# Use user-defined RPM specific variables value +# or generate reasonable default value from +# CPACK_xxx generic values. +# The variables comes from the needed (mandatory or not) +# values found in the RPM specification file aka ".spec" file. +# The variables which may/should be defined are: +# + +# CPACK_RPM_PACKAGE_SUMMARY (mandatory) +IF(NOT CPACK_RPM_PACKAGE_SUMMARY) + # if neither var is defined lets use the name as summary + IF(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY) + STRING(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) + ELSE(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY) + SET(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) + ENDIF(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY) +ENDIF(NOT CPACK_RPM_PACKAGE_SUMMARY) + +# CPACK_RPM_PACKAGE_NAME (mandatory) +IF(NOT CPACK_RPM_PACKAGE_NAME) + STRING(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) +ENDIF(NOT CPACK_RPM_PACKAGE_NAME) + +# CPACK_RPM_PACKAGE_VERSION (mandatory) +IF(NOT CPACK_RPM_PACKAGE_VERSION) + IF(NOT CPACK_PACKAGE_VERSION) + MESSAGE(FATAL_ERROR "RPM package requires a package version") + ENDIF(NOT CPACK_PACKAGE_VERSION) + SET(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) +ENDIF(NOT CPACK_RPM_PACKAGE_VERSION) +# Replace '-' in version with '_' +# '-' character is an Illegal RPM version character +# it is illegal because it is used to separate +# RPM "Version" from RPM "Release" +STRING(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) + +# CPACK_RPM_PACKAGE_ARCHITECTURE (optional) +IF(CPACK_RPM_PACKAGE_ARCHITECTURE) + SET(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}") + IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) +ELSE(CPACK_RPM_PACKAGE_ARCHITECTURE) + SET(TMP_RPM_BUILDARCH "") +ENDIF(CPACK_RPM_PACKAGE_ARCHITECTURE) + +# CPACK_RPM_PACKAGE_RELEASE +# The RPM release is the numbering of the RPM package ITSELF +# this is the version of the PACKAGING and NOT the version +# of the CONTENT of the package. +# You may well need to generate a new RPM package release +# without changing the version of the packaged software. +# This is the case when the packaging is buggy (not) the software :=) +# If not set, 1 is a good candidate +IF(NOT CPACK_RPM_PACKAGE_RELEASE) + SET(CPACK_RPM_PACKAGE_RELEASE 1) +ENDIF(NOT CPACK_RPM_PACKAGE_RELEASE) + +# CPACK_RPM_PACKAGE_LICENSE +IF(NOT CPACK_RPM_PACKAGE_LICENSE) + SET(CPACK_RPM_PACKAGE_LICENSE "unknown") +ENDIF(NOT CPACK_RPM_PACKAGE_LICENSE) + +# CPACK_RPM_PACKAGE_GROUP +IF(NOT CPACK_RPM_PACKAGE_GROUP) + SET(CPACK_RPM_PACKAGE_GROUP "unknown") +ENDIF(NOT CPACK_RPM_PACKAGE_GROUP) + +# CPACK_RPM_PACKAGE_VENDOR +IF(NOT CPACK_RPM_PACKAGE_VENDOR) + IF(CPACK_PACKAGE_VENDOR) + SET(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") + ELSE(CPACK_PACKAGE_VENDOR) + SET(CPACK_RPM_PACKAGE_VENDOR "unknown") + ENDIF(CPACK_PACKAGE_VENDOR) +ENDIF(NOT CPACK_RPM_PACKAGE_VENDOR) + +# CPACK_RPM_PACKAGE_SOURCE +# The name of the source tarball in case we generate a source RPM + +# CPACK_RPM_PACKAGE_DESCRIPTION +# The variable content may be either +# - explicitly given by the user or +# - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE +# if it is defined +# - set to a default value +# +IF (NOT CPACK_RPM_PACKAGE_DESCRIPTION) + IF (CPACK_PACKAGE_DESCRIPTION_FILE) + FILE(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) + ELSE (CPACK_PACKAGE_DESCRIPTION_FILE) + SET(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") + ENDIF (CPACK_PACKAGE_DESCRIPTION_FILE) +ENDIF (NOT CPACK_RPM_PACKAGE_DESCRIPTION) + +# CPACK_RPM_COMPRESSION_TYPE +# +IF (CPACK_RPM_COMPRESSION_TYPE) + IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") + SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") + ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") + IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") + SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") + ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") + IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") + SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") + ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") + IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") + SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") + ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") +ELSE(CPACK_RPM_COMPRESSION_TYPE) + SET(CPACK_RPM_COMPRESSION_TYPE_TMP "") +ENDIF(CPACK_RPM_COMPRESSION_TYPE) + +if(CPACK_PACKAGE_RELOCATABLE) + set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) +endif(CPACK_PACKAGE_RELOCATABLE) +if(CPACK_RPM_PACKAGE_RELOCATABLE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Trying to build a relocatable package") + endif(CPACK_RPM_PACKAGE_DEBUG) + if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) + message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") + else(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) + set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) + endif(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) +endif(CPACK_RPM_PACKAGE_RELOCATABLE) + +# Check if additional fields for RPM spec header are given +# There may be some COMPONENT specific variables as well +FOREACH(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) + else() + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + else() + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + + IF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) + STRING(LENGTH ${_RPM_SPEC_HEADER} _PACKAGE_HEADER_STRLENGTH) + MATH(EXPR _PACKAGE_HEADER_STRLENGTH "${_PACKAGE_HEADER_STRLENGTH} - 1") + STRING(SUBSTRING ${_RPM_SPEC_HEADER} 1 ${_PACKAGE_HEADER_STRLENGTH} _PACKAGE_HEADER_TAIL) + STRING(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) + STRING(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) + SET(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") + IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + SET(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + ELSE(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) + # Do not forget to unset previously set header (from previous component) + UNSET(TMP_RPM_${_RPM_SPEC_HEADER}) + ENDIF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) +ENDFOREACH(_RPM_SPEC_HEADER) + +# CPACK_RPM_SPEC_INSTALL_POST +# May be used to define a RPM post intallation script +# for example setting it to "/bin/true" may prevent +# rpmbuild from stripping binaries. +IF(CPACK_RPM_SPEC_INSTALL_POST) + IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + SET(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") +ENDIF(CPACK_RPM_SPEC_INSTALL_POST) + +# CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE) +# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE) +# May be used to embed a post (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %post or %postun section +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) + endif() + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE}) + else(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) + endif(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) +else(CPACK_RPM_PACKAGE_COMPONENT) + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) +endif(CPACK_RPM_PACKAGE_COMPONENT) + +# Handle post-install file if it has been specified +if(CPACK_RPM_POST_INSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) + file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) + else(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) + message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") + endif(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) +else(CPACK_RPM_POST_INSTALL_READ_FILE) + # reset SPEC var value if no post install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTINSTALL "") +endif(CPACK_RPM_POST_INSTALL_READ_FILE) + +# Handle post-uninstall file if it has been specified +if(CPACK_RPM_POST_UNINSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) + file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) + else(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) + message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") + endif(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) +else(CPACK_RPM_POST_UNINSTALL_READ_FILE) + # reset SPEC var value if no post uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTUNINSTALL "") +endif(CPACK_RPM_POST_UNINSTALL_READ_FILE) + +# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE) +# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE) +# May be used to embed a pre (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %pre or %preun section +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE}) + else(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) + endif(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE}) + else(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) + endif(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) +else(CPACK_RPM_PACKAGE_COMPONENT) + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) +endif(CPACK_RPM_PACKAGE_COMPONENT) + +# Handle pre-install file if it has been specified +if(CPACK_RPM_PRE_INSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) + file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) + else(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) + message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") + endif(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) +else(CPACK_RPM_PRE_INSTALL_READ_FILE) + # reset SPEC var value if no pre-install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREINSTALL "") +endif(CPACK_RPM_PRE_INSTALL_READ_FILE) + +# Handle pre-uninstall file if it has been specified +if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) + file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) + else(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) + message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") + endif(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) +else(CPACK_RPM_PRE_UNINSTALL_READ_FILE) + # reset SPEC var value if no pre-uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREUNINSTALL "") +endif(CPACK_RPM_PRE_UNINSTALL_READ_FILE) + +# CPACK_RPM_CHANGELOG_FILE +# May be used to embed a changelog in the spec file. +# The refered file will be read and directly put after the %changelog section +if(CPACK_RPM_CHANGELOG_FILE) + if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) + file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) + else(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) + message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") + endif(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) +else(CPACK_RPM_CHANGELOG_FILE) + set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Erk <eric.noulard@gmail.com>\n Generated by CPack RPM (no Changelog file were provided)") +endif(CPACK_RPM_CHANGELOG_FILE) + +# CPACK_RPM_SPEC_MORE_DEFINE +# This is a generated spec rpm file spaceholder +IF(CPACK_RPM_SPEC_MORE_DEFINE) + IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) +ENDIF(CPACK_RPM_SPEC_MORE_DEFINE) + +# Now we may create the RPM build tree structure +SET(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") +MESSAGE(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") +# Prepare RPM build tree +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) +FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) + +#SET(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") +SET(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") +# it seems rpmbuild can't handle spaces in the path +# neither escaping (as below) nor putting quotes around the path seem to help +#STRING(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") +SET(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") + +# Use files tree to construct files command (spec file) +# We should not forget to include symlinks (thus -o -type l) +# We should include directory as well (thus -type d) +# but not the main local dir "." (thus -a -not -name ".") +# We must remove the './' due to the local search and escape the +# file name by enclosing it between double quotes (thus the sed) +# Then we must authorize any man pages extension (adding * at the end) +# because rpmbuild may automatically compress those files +EXECUTE_PROCESS(COMMAND find . -type f -o -type l -o (-type d -a -not -name ".") + COMMAND sed s:.*/man.*/.*:&*: + COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/ + WORKING_DIRECTORY "${WDIR}" + OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES) + +# In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_<COMPONENT> +# into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL +# otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES +# This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_ABSOLUTE_DESTINATION_FILES) + set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}") + set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") + message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif(CPACK_RPM_PACKAGE_DEBUG) + endif() +else() + if(CPACK_ABSOLUTE_DESTINATION_FILES) + set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") + endif() +endif() + +# In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM_<COMPONENT>_USER_FILELIST. +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST) + set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") + message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif(CPACK_RPM_PACKAGE_DEBUG) + else() + set(CPACK_RPM_USER_FILELIST_INTERNAL "") + endif() +else() + if(CPACK_RPM_USER_FILELIST) + set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") + else() + set(CPACK_RPM_USER_FILELIST_INTERNAL "") + endif() +endif() + +# Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL +# Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL +# or CPACK_RPM_INSTALL_FILES, +# hence it must be done before these auto-generated lists are processed. +if(CPACK_RPM_USER_FILELIST_INTERNAL) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + + # Create CMake list from CPACK_RPM_INSTALL_FILES + string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) + string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") + string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") + + set(CPACK_RPM_USER_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) + string(REGEX REPLACE "%[A-Za-z\(\)]* " "" F_PATH ${F}) + string(REGEX MATCH "%[A-Za-z\(\)]*" F_PREFIX ${F}) + + if(F_PREFIX) + set(F_PREFIX "${F_PREFIX} ") + endif() + # Rebuild the user list file + set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n") + + # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL + list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) + list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) + + endforeach() + + # Rebuild CPACK_RPM_INSTALL_FILES + set(CPACK_RPM_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endforeach(F) +else() + set(CPACK_RPM_USER_INSTALL_FILES "") +endif() + +if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + # Remove trailing space + string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) + # Transform endline separated - string into CMake List + string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") + # Remove unecessary quotes + string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") + # Remove ABSOLUTE install file from INSTALL FILE LIST + list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) + # Rebuild INSTALL_FILES + set(CPACK_RPM_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endforeach(F) + # Build ABSOLUTE_INSTALL_FILES + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") + foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n") + endforeach(F) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") + message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) +else() + # reset vars in order to avoid leakage of value(s) from one component to another + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") +endif(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + +# Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir +# This is necessary to avoid duplicate files since rpmbuild do +# recursion on its own when encountering a pathname which is a directory +# which is not flagged as %dir +string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) +string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") +string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") +set(CPACK_RPM_INSTALL_FILES "") +foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + if(IS_DIRECTORY "${WDIR}/${F}") + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n") + else() + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endif() +endforeach(F) +set(CPACK_RPM_INSTALL_FILES_LIST "") + +# The name of the final spec file to be used by rpmbuild +SET(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec") + +# Print out some debug information if we were asked for that +IF(CPACK_RPM_PACKAGE_DEBUG) + MESSAGE("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") + MESSAGE("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") + MESSAGE("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") + MESSAGE("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") + MESSAGE("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") + MESSAGE("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") + MESSAGE("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") + MESSAGE("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") + MESSAGE("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") +ENDIF(CPACK_RPM_PACKAGE_DEBUG) + +# USER generated spec file handling. +# We should generate a spec file template: +# - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE +# - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE +# +IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) + FILE(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in + "# -*- rpm-spec -*- +BuildRoot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ +Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ +Name: \@CPACK_RPM_PACKAGE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_NAME\@ +Version: \@CPACK_RPM_PACKAGE_VERSION\@ +Release: \@CPACK_RPM_PACKAGE_RELEASE\@ +License: \@CPACK_RPM_PACKAGE_LICENSE\@ +Group: \@CPACK_RPM_PACKAGE_GROUP\@ +Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ +\@TMP_RPM_URL\@ +\@TMP_RPM_REQUIRES\@ +\@TMP_RPM_PROVIDES\@ +\@TMP_RPM_OBSOLETES\@ +\@TMP_RPM_CONFLICTS\@ +\@TMP_RPM_AUTOPROV\@ +\@TMP_RPM_AUTOREQ\@ +\@TMP_RPM_AUTOREQPROV\@ +\@TMP_RPM_BUILDARCH\@ +\@TMP_RPM_PREFIX\@ + +%define _rpmdir \@CPACK_RPM_DIRECTORY\@ +%define _rpmfilename \@CPACK_RPM_FILE_NAME\@ +%define _unpackaged_files_terminate_build 0 +%define _topdir \@CPACK_RPM_DIRECTORY\@ +\@TMP_RPM_SPEC_INSTALL_POST\@ +\@CPACK_RPM_SPEC_MORE_DEFINE\@ +\@CPACK_RPM_COMPRESSION_TYPE_TMP\@ + +%description +\@CPACK_RPM_PACKAGE_DESCRIPTION\@ + +# This is a shortcutted spec file generated by CMake RPM generator +# we skip _install step because CPack does that for us. +# We do only save CPack installed tree in _prepr +# and then restore it in build. +%prep +mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" + +#p build + +%install +if [ -e $RPM_BUILD_ROOT ]; +then + rm -rf $RPM_BUILD_ROOT +fi +mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT + +%clean + +%post +\@CPACK_RPM_SPEC_POSTINSTALL\@ + +%postun +\@CPACK_RPM_SPEC_POSTUNINSTALL\@ + +%pre +\@CPACK_RPM_SPEC_PREINSTALL\@ + +%preun +\@CPACK_RPM_SPEC_PREUNINSTALL\@ + +%files +%defattr(-,root,root,-) +${CPACK_RPM_INSTALL_FILES} +${CPACK_RPM_ABSOLUTE_INSTALL_FILES} +${CPACK_RPM_USER_INSTALL_FILES} + +%changelog +\@CPACK_RPM_SPEC_CHANGELOG\@ +") + # Stop here if we were asked to only generate a template USER spec file + # The generated file may then be used as a template by user who wants + # to customize their own spec file. + IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) + MESSAGE(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in") + ENDIF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) +ENDIF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) + +# After that we may either use a user provided spec file +# or generate one using appropriate variables value. +IF(CPACK_RPM_USER_BINARY_SPECFILE) + # User may have specified SPECFILE just use it + MESSAGE("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") + # The user provided file is processed for @var replacement + CONFIGURE_FILE(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) +ELSE(CPACK_RPM_USER_BINARY_SPECFILE) + # No User specified spec file, will use the generated spec file + MESSAGE("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") + # Note the just created file is processed for @var replacement + CONFIGURE_FILE(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) +ENDIF(CPACK_RPM_USER_BINARY_SPECFILE) + +IF(RPMBUILD_EXECUTABLE) + # Now call rpmbuild using the SPECFILE + EXECUTE_PROCESS( + COMMAND "${RPMBUILD_EXECUTABLE}" -bb + --define "_topdir ${CPACK_RPM_DIRECTORY}" + --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + "${CPACK_RPM_BINARY_SPECFILE}" + WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT + ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err" + OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") + IF(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) + FILE(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR) + FILE(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT) + MESSAGE("CPackRPM:Debug: You may consult rpmbuild logs in: ") + MESSAGE("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err") + MESSAGE("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + MESSAGE("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") + MESSAGE("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + ENDIF(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) +ELSE(RPMBUILD_EXECUTABLE) + IF(ALIEN_EXECUTABLE) + MESSAGE(FATAL_ERROR "RPM packaging through alien not done (yet)") + ENDIF(ALIEN_EXECUTABLE) +ENDIF(RPMBUILD_EXECUTABLE) |