diff options
Diffstat (limited to 'Jamroot')
| -rw-r--r-- | Jamroot | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/Jamroot b/Jamroot new file mode 100644 index 0000000000..38b908c135 --- /dev/null +++ b/Jamroot @@ -0,0 +1,263 @@ +# Copyright Vladimir Prus 2002-2006. +# Copyright Dave Abrahams 2005-2006. +# Copyright Rene Rivera 2005-2007. +# Copyright Douglas Gregor 2005. +# +# Distributed under the Boost Software License, Version 1.0. +# (See accompanying file LICENSE_1_0.txt or copy at +# http://www.boost.org/LICENSE_1_0.txt) + +# Usage: +# +# bjam [options] [properties] [install|stage] +# +# Builds and installs Boost. +# +# Targets and Related Options: +# +# install Install headers and compiled library files to the +# ======= configured locations (below). +# +# --prefix=<PREFIX> Install architecture independent files here. +# Default; C:\Boost on Win32 +# Default; /usr/local on Unix. Linux, etc. +# +# --exec-prefix=<EPREFIX> Install architecture dependent files here. +# Default; <PREFIX> +# +# --libdir=<DIR> Install library files here. +# Default; <EPREFIX>/lib +# +# --includedir=<HDRDIR> Install header files here. +# Default; <PREFIX>/include +# +# stage Build and install only compiled library files +# ===== to the stage directory. +# +# --stagedir=<STAGEDIR> Install library files here +# Default; ./stage +# +# Other Options: +# +# --build-type=<type> Build the specified pre-defined set of variations +# of the libraries. Note, that which variants get +# built depends on what each library supports. +# +# minimal (default) - Builds a minimal set of +# variants. On Windows, these are static +# multithreaded libraries in debug and release +# modes, using shared runtime. On Linux, these +# are static and shared multithreaded libraries +# in release mode. +# +# complete - Build all possible variations. +# +# --build-dir=DIR Build in this location instead of building +# within the distribution tree. Recommended! +# +# --show-libraries Displays the list of Boost libraries that require +# build and installation steps, then exit. +# +# --layout=<layout> Determines whether to choose library names +# and header locations such that multiple +# versions of Boost or multiple compilers can +# be used on the same system. +# +# versioned - Names of boost binaries +# include the Boost version number, name and +# version of the compiler and encoded build +# properties. Boost headers are installed in a +# subdirectory of <HDRDIR> whose name contains +# the Boost version number. +# +# tagged -- Names of boost binaries include the +# encoded build properties such as variant and +# threading, but do not including compiler name +# and version, or Boost version. This option is +# useful if you build several variants of Boost, +# using the same compiler. +# +# system - Binaries names do not include the +# Boost version number or the name and version +# number of the compiler. Boost headers are +# installed directly into <HDRDIR>. This option +# is intended for system integrators who are +# building distribution packages. +# +# The default value is 'versioned' on Windows, and +# 'system' on Unix. +# +# --buildid=ID Adds the specified ID to the name of built +# libraries. The default is to not add anything. +# +# --python-buildid=ID Adds the specified ID to the name of built +# libraries that depend on Python. The default +# is to not add anything. This ID is added in +# addition to --buildid. +# +# +# --help This message. +# +# --with-<library> Build and install the specified <library> +# If this option is used, only libraries +# specified using this option will be built. +# +# --without-<library> Do not build, stage, or install the specified +# <library>. By default, all libraries are built. +# +# Properties: +# +# toolset=toolset Indicates the toolset to build with. +# +# variant=debug|release Select the build variant +# +# link=static|shared Whether to build static or shared libraries +# +# threading=single|multi Whether to build single or multithreaded binaries +# +# runtime-link=static|shared +# Whether to link to static or shared C and C++ runtime. +# + +# TODO: +# - handle boost version +# - handle python options such as pydebug + +import boostcpp ; +import package ; + +import sequence ; +import xsltproc ; +import set ; +import path ; + +path-constant BOOST_ROOT : . ; +constant BOOST_VERSION : 1.49.0 ; +constant BOOST_JAMROOT_MODULE : $(__name__) ; + +boostcpp.set-version $(BOOST_VERSION) ; + +project boost + : requirements <include>. + # Disable auto-linking for all targets here, primarily because it caused + # troubles with V2. + <define>BOOST_ALL_NO_LIB=1 + # Used to encode variant in target name. See the 'tag' rule below. + <tag>@$(__name__).tag + <conditional>@handle-static-runtime + # The standard library Sun compilers use by default has no chance + # of working with Boost. Override it. + <toolset>sun:<stdlib>sun-stlport + # Comeau does not support shared lib + <toolset>como:<link>static + <toolset>como-linux:<define>_GNU_SOURCE=1 + # When building docs within Boost, we want the standard Boost style + <xsl:param>boost.defaults=Boost + : usage-requirements <include>. + : build-dir bin.v2 + ; + +# This rule is called by Boost.Build to determine the name of target. We use it +# to encode the build variant, compiler name and boost version in the target +# name. +# +rule tag ( name : type ? : property-set ) +{ + return [ boostcpp.tag $(name) : $(type) : $(property-set) ] ; +} + +rule handle-static-runtime ( properties * ) +{ + # Using static runtime with shared libraries is impossible on Linux, + # and dangerous on Windows. Therefore, we disallow it. This might + # be drastic, but it was disabled for a while with nobody complaining. + + # For CW, static runtime is needed so that std::locale works. + if <link>shared in $(properties) && <runtime-link>static in $(properties) && + ! ( <toolset>cw in $(properties) ) + { + ECHO "error: link=shared together with runtime-link=static is not allowed" ; + ECHO "error: such property combination is either impossible " ; + ECHO "error: or too dangerious to be of any use" ; + EXIT ; + } +} + +all-libraries = [ MATCH .*libs/(.*)/build/.* : [ glob libs/*/build/Jamfile.v2 ] + [ glob libs/*/build/Jamfile ] ] + ; + +all-libraries = [ sequence.unique $(all-libraries) ] ; +# The function_types library has a Jamfile, but it's used for maintenance +# purposes, there's no library to build and install. +all-libraries = [ set.difference $(all-libraries) : function_types ] ; + +# Setup convenient aliases for all libraries. + +local rule explicit-alias ( id : targets + ) +{ + alias $(id) : $(targets) ; + explicit $(id) ; +} + +# First, the complicated libraries: where the target name in Jamfile is +# different from its directory name. +explicit-alias prg_exec_monitor : libs/test/build//boost_prg_exec_monitor ; +explicit-alias test_exec_monitor : libs/test/build//boost_test_exec_monitor ; +explicit-alias unit_test_framework : libs/test/build//boost_unit_test_framework ; +explicit-alias bgl-vis : libs/graps/build//bgl-vis ; +explicit-alias serialization : libs/serialization/build//boost_serialization ; +explicit-alias wserialization : libs/serialization/build//boost_wserialization ; +for local l in $(all-libraries) +{ + if ! $(l) in test graph serialization + { + explicit-alias $(l) : libs/$(l)/build//boost_$(l) ; + } +} + +alias headers : : : : <include>. ; +explicit headers ; + +# Make project ids of all libraries known. +for local l in $(all-libraries) +{ + use-project /boost/$(l) : libs/$(l)/build ; +} + +# This rule should be called from libraries' Jamfiles and will create two +# targets, "install" and "stage", that will install or stage that library. The +# --prefix option is respected, but --with and --without options, naturally, are +# ignored. +# +# - libraries -- list of library targets to install. +# +rule boost-install ( libraries * ) +{ + package.install install + : <dependency>/boost//install-proper-headers $(install-requirements) + : # No binaries + : $(libraries) + : # No headers, it is handled by the dependency. + ; + + install stage : $(libraries) : <location>$(BOOST_STAGE_LOCATE) ; + + module [ CALLER_MODULE ] + { + explicit stage ; + explicit install ; + } +} + +headers = + # The .SUNWCCh files are present in tr1 include directory and have to be installed, + # see http://lists.boost.org/Archives/boost/2007/05/121430.php + [ path.glob-tree $(BOOST_ROOT)/boost : *.hpp *.ipp *.h *.inc *.SUNWCCh : CVS .svn ] + [ path.glob-tree $(BOOST_ROOT)/boost/compatibility/cpp_c_headers : c* : CVS .svn ] + [ path.glob boost/tr1/tr1 : * : bcc32 sun CVS .svn ] + ; + +# Declare special top-level targets that build and install the desired variants +# of the libraries. +boostcpp.declare-targets $(all-libraries) : $(headers) ; |