/* PPC GNU/Linux native support.
Copyright (C) 1988, 1989, 1991, 1992, 1994, 1996, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see . */
#include "defs.h"
#include "gdb_string.h"
#include "observer.h"
#include "frame.h"
#include "inferior.h"
#include "gdbthread.h"
#include "gdbcore.h"
#include "regcache.h"
#include "gdb_assert.h"
#include "target.h"
#include "linux-nat.h"
#include
#include
#include
#include
#include
#include
#include "gdb_wait.h"
#include
#include
#include
/* Prototypes for supply_gregset etc. */
#include "gregset.h"
#include "ppc-tdep.h"
#include "ppc-linux-tdep.h"
/* Required when using the AUXV. */
#include "elf/common.h"
#include "auxv.h"
/* This sometimes isn't defined. */
#ifndef PT_ORIG_R3
#define PT_ORIG_R3 34
#endif
#ifndef PT_TRAP
#define PT_TRAP 40
#endif
/* The PPC_FEATURE_* defines should be provided by .
If they aren't, we can provide them ourselves (their values are fixed
because they are part of the kernel ABI). They are used in the AT_HWCAP
entry of the AUXV. */
#ifndef PPC_FEATURE_CELL
#define PPC_FEATURE_CELL 0x00010000
#endif
#ifndef PPC_FEATURE_BOOKE
#define PPC_FEATURE_BOOKE 0x00008000
#endif
#ifndef PPC_FEATURE_HAS_DFP
#define PPC_FEATURE_HAS_DFP 0x00000400 /* Decimal Floating Point. */
#endif
/* Glibc's headers don't define PTRACE_GETVRREGS so we cannot use a
configure time check. Some older glibc's (for instance 2.2.1)
don't have a specific powerpc version of ptrace.h, and fall back on
a generic one. In such cases, sys/ptrace.h defines
PTRACE_GETFPXREGS and PTRACE_SETFPXREGS to the same numbers that
ppc kernel's asm/ptrace.h defines PTRACE_GETVRREGS and
PTRACE_SETVRREGS to be. This also makes a configury check pretty
much useless. */
/* These definitions should really come from the glibc header files,
but Glibc doesn't know about the vrregs yet. */
#ifndef PTRACE_GETVRREGS
#define PTRACE_GETVRREGS 18
#define PTRACE_SETVRREGS 19
#endif
/* PTRACE requests for POWER7 VSX registers. */
#ifndef PTRACE_GETVSXREGS
#define PTRACE_GETVSXREGS 27
#define PTRACE_SETVSXREGS 28
#endif
/* Similarly for the ptrace requests for getting / setting the SPE
registers (ev0 -- ev31, acc, and spefscr). See the description of
gdb_evrregset_t for details. */
#ifndef PTRACE_GETEVRREGS
#define PTRACE_GETEVRREGS 20
#define PTRACE_SETEVRREGS 21
#endif
/* Similarly for the hardware watchpoint support. These requests are used
when the BookE kernel interface is not available. */
#ifndef PTRACE_GET_DEBUGREG
#define PTRACE_GET_DEBUGREG 25
#endif
#ifndef PTRACE_SET_DEBUGREG
#define PTRACE_SET_DEBUGREG 26
#endif
#ifndef PTRACE_GETSIGINFO
#define PTRACE_GETSIGINFO 0x4202
#endif
/* These requests are used when the BookE kernel interface is available.
It exposes the additional debug features of BookE processors, such as
ranged breakpoints and watchpoints and hardware-accelerated condition
evaluation. */
#ifndef PPC_PTRACE_GETHWDBGINFO
/* Not having PPC_PTRACE_GETHWDBGINFO defined means that the new BookE
interface is not present in ptrace.h, so we'll have to pretty much include
it all here so that the code at least compiles on older systems. */
#define PPC_PTRACE_GETHWDBGINFO 0x89
#define PPC_PTRACE_SETHWDEBUG 0x88
#define PPC_PTRACE_DELHWDEBUG 0x87
struct ppc_debug_info
{
uint32_t version; /* Only version 1 exists to date */
uint32_t num_instruction_bps;
uint32_t num_data_bps;
uint32_t num_condition_regs;
uint32_t data_bp_alignment;
uint32_t sizeof_condition; /* size of the DVC register */
uint64_t features;
};
/* Features will have bits indicating whether there is support for: */
#define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
#define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
struct ppc_hw_breakpoint
{
uint32_t version; /* currently, version must be 1 */
uint32_t trigger_type; /* only some combinations allowed */
uint32_t addr_mode; /* address match mode */
uint32_t condition_mode; /* break/watchpoint condition flags */
uint64_t addr; /* break/watchpoint address */
uint64_t addr2; /* range end or mask */
uint64_t condition_value; /* contents of the DVC register */
};
/* Trigger type. */
#define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
#define PPC_BREAKPOINT_TRIGGER_READ 0x2
#define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
#define PPC_BREAKPOINT_TRIGGER_RW 0x6
/* Address mode. */
#define PPC_BREAKPOINT_MODE_EXACT 0x0
#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
#define PPC_BREAKPOINT_MODE_MASK 0x3
/* Condition mode. */
#define PPC_BREAKPOINT_CONDITION_NONE 0x0
#define PPC_BREAKPOINT_CONDITION_AND 0x1
#define PPC_BREAKPOINT_CONDITION_EXACT 0x1
#define PPC_BREAKPOINT_CONDITION_OR 0x2
#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000
#define PPC_BREAKPOINT_CONDITION_BE_SHIFT 16
#define PPC_BREAKPOINT_CONDITION_BE(n) \
(1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
#endif /* PPC_PTRACE_GETHWDBGINFO */
/* Similarly for the general-purpose (gp0 -- gp31)
and floating-point registers (fp0 -- fp31). */
#ifndef PTRACE_GETREGS
#define PTRACE_GETREGS 12
#endif
#ifndef PTRACE_SETREGS
#define PTRACE_SETREGS 13
#endif
#ifndef PTRACE_GETFPREGS
#define PTRACE_GETFPREGS 14
#endif
#ifndef PTRACE_SETFPREGS
#define PTRACE_SETFPREGS 15
#endif
/* This oddity is because the Linux kernel defines elf_vrregset_t as
an array of 33 16 bytes long elements. I.e. it leaves out vrsave.
However the PTRACE_GETVRREGS and PTRACE_SETVRREGS requests return
the vrsave as an extra 4 bytes at the end. I opted for creating a
flat array of chars, so that it is easier to manipulate for gdb.
There are 32 vector registers 16 bytes longs, plus a VSCR register
which is only 4 bytes long, but is fetched as a 16 bytes
quantity. Up to here we have the elf_vrregset_t structure.
Appended to this there is space for the VRSAVE register: 4 bytes.
Even though this vrsave register is not included in the regset
typedef, it is handled by the ptrace requests.
Note that GNU/Linux doesn't support little endian PPC hardware,
therefore the offset at which the real value of the VSCR register
is located will be always 12 bytes.
The layout is like this (where x is the actual value of the vscr reg): */
/* *INDENT-OFF* */
/*
|.|.|.|.|.....|.|.|.|.||.|.|.|x||.|
<-------> <-------><-------><->
VR0 VR31 VSCR VRSAVE
*/
/* *INDENT-ON* */
#define SIZEOF_VRREGS 33*16+4
typedef char gdb_vrregset_t[SIZEOF_VRREGS];
/* This is the layout of the POWER7 VSX registers and the way they overlap
with the existing FPR and VMX registers.
VSR doubleword 0 VSR doubleword 1
----------------------------------------------------------------
VSR[0] | FPR[0] | |
----------------------------------------------------------------
VSR[1] | FPR[1] | |
----------------------------------------------------------------
| ... | |
| ... | |
----------------------------------------------------------------
VSR[30] | FPR[30] | |
----------------------------------------------------------------
VSR[31] | FPR[31] | |
----------------------------------------------------------------
VSR[32] | VR[0] |
----------------------------------------------------------------
VSR[33] | VR[1] |
----------------------------------------------------------------
| ... |
| ... |
----------------------------------------------------------------
VSR[62] | VR[30] |
----------------------------------------------------------------
VSR[63] | VR[31] |
----------------------------------------------------------------
VSX has 64 128bit registers. The first 32 registers overlap with
the FP registers (doubleword 0) and hence extend them with additional
64 bits (doubleword 1). The other 32 regs overlap with the VMX
registers. */
#define SIZEOF_VSXREGS 32*8
typedef char gdb_vsxregset_t[SIZEOF_VSXREGS];
/* On PPC processors that support the the Signal Processing Extension
(SPE) APU, the general-purpose registers are 64 bits long.
However, the ordinary Linux kernel PTRACE_PEEKUSER / PTRACE_POKEUSER
ptrace calls only access the lower half of each register, to allow
them to behave the same way they do on non-SPE systems. There's a
separate pair of calls, PTRACE_GETEVRREGS / PTRACE_SETEVRREGS, that
read and write the top halves of all the general-purpose registers
at once, along with some SPE-specific registers.
GDB itself continues to claim the general-purpose registers are 32
bits long. It has unnamed raw registers that hold the upper halves
of the gprs, and the the full 64-bit SIMD views of the registers,
'ev0' -- 'ev31', are pseudo-registers that splice the top and
bottom halves together.
This is the structure filled in by PTRACE_GETEVRREGS and written to
the inferior's registers by PTRACE_SETEVRREGS. */
struct gdb_evrregset_t
{
unsigned long evr[32];
unsigned long long acc;
unsigned long spefscr;
};
/* Non-zero if our kernel may support the PTRACE_GETVSXREGS and
PTRACE_SETVSXREGS requests, for reading and writing the VSX
POWER7 registers 0 through 31. Zero if we've tried one of them and
gotten an error. Note that VSX registers 32 through 63 overlap
with VR registers 0 through 31. */
int have_ptrace_getsetvsxregs = 1;
/* Non-zero if our kernel may support the PTRACE_GETVRREGS and
PTRACE_SETVRREGS requests, for reading and writing the Altivec
registers. Zero if we've tried one of them and gotten an
error. */
int have_ptrace_getvrregs = 1;
/* Non-zero if our kernel may support the PTRACE_GETEVRREGS and
PTRACE_SETEVRREGS requests, for reading and writing the SPE
registers. Zero if we've tried one of them and gotten an
error. */
int have_ptrace_getsetevrregs = 1;
/* Non-zero if our kernel may support the PTRACE_GETREGS and
PTRACE_SETREGS requests, for reading and writing the
general-purpose registers. Zero if we've tried one of
them and gotten an error. */
int have_ptrace_getsetregs = 1;
/* Non-zero if our kernel may support the PTRACE_GETFPREGS and
PTRACE_SETFPREGS requests, for reading and writing the
floating-pointers registers. Zero if we've tried one of
them and gotten an error. */
int have_ptrace_getsetfpregs = 1;
/* *INDENT-OFF* */
/* registers layout, as presented by the ptrace interface:
PT_R0, PT_R1, PT_R2, PT_R3, PT_R4, PT_R5, PT_R6, PT_R7,
PT_R8, PT_R9, PT_R10, PT_R11, PT_R12, PT_R13, PT_R14, PT_R15,
PT_R16, PT_R17, PT_R18, PT_R19, PT_R20, PT_R21, PT_R22, PT_R23,
PT_R24, PT_R25, PT_R26, PT_R27, PT_R28, PT_R29, PT_R30, PT_R31,
PT_FPR0, PT_FPR0 + 2, PT_FPR0 + 4, PT_FPR0 + 6, PT_FPR0 + 8, PT_FPR0 + 10, PT_FPR0 + 12, PT_FPR0 + 14,
PT_FPR0 + 16, PT_FPR0 + 18, PT_FPR0 + 20, PT_FPR0 + 22, PT_FPR0 + 24, PT_FPR0 + 26, PT_FPR0 + 28, PT_FPR0 + 30,
PT_FPR0 + 32, PT_FPR0 + 34, PT_FPR0 + 36, PT_FPR0 + 38, PT_FPR0 + 40, PT_FPR0 + 42, PT_FPR0 + 44, PT_FPR0 + 46,
PT_FPR0 + 48, PT_FPR0 + 50, PT_FPR0 + 52, PT_FPR0 + 54, PT_FPR0 + 56, PT_FPR0 + 58, PT_FPR0 + 60, PT_FPR0 + 62,
PT_NIP, PT_MSR, PT_CCR, PT_LNK, PT_CTR, PT_XER, PT_MQ */
/* *INDENT_ON * */
static int
ppc_register_u_addr (struct gdbarch *gdbarch, int regno)
{
int u_addr = -1;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* NOTE: cagney/2003-11-25: This is the word size used by the ptrace
interface, and not the wordsize of the program's ABI. */
int wordsize = sizeof (long);
/* General purpose registers occupy 1 slot each in the buffer */
if (regno >= tdep->ppc_gp0_regnum
&& regno < tdep->ppc_gp0_regnum + ppc_num_gprs)
u_addr = ((regno - tdep->ppc_gp0_regnum + PT_R0) * wordsize);
/* Floating point regs: eight bytes each in both 32- and 64-bit
ptrace interfaces. Thus, two slots each in 32-bit interface, one
slot each in 64-bit interface. */
if (tdep->ppc_fp0_regnum >= 0
&& regno >= tdep->ppc_fp0_regnum
&& regno < tdep->ppc_fp0_regnum + ppc_num_fprs)
u_addr = (PT_FPR0 * wordsize) + ((regno - tdep->ppc_fp0_regnum) * 8);
/* UISA special purpose registers: 1 slot each */
if (regno == gdbarch_pc_regnum (gdbarch))
u_addr = PT_NIP * wordsize;
if (regno == tdep->ppc_lr_regnum)
u_addr = PT_LNK * wordsize;
if (regno == tdep->ppc_cr_regnum)
u_addr = PT_CCR * wordsize;
if (regno == tdep->ppc_xer_regnum)
u_addr = PT_XER * wordsize;
if (regno == tdep->ppc_ctr_regnum)
u_addr = PT_CTR * wordsize;
#ifdef PT_MQ
if (regno == tdep->ppc_mq_regnum)
u_addr = PT_MQ * wordsize;
#endif
if (regno == tdep->ppc_ps_regnum)
u_addr = PT_MSR * wordsize;
if (regno == PPC_ORIG_R3_REGNUM)
u_addr = PT_ORIG_R3 * wordsize;
if (regno == PPC_TRAP_REGNUM)
u_addr = PT_TRAP * wordsize;
if (tdep->ppc_fpscr_regnum >= 0
&& regno == tdep->ppc_fpscr_regnum)
{
/* NOTE: cagney/2005-02-08: On some 64-bit GNU/Linux systems the
kernel headers incorrectly contained the 32-bit definition of
PT_FPSCR. For the 32-bit definition, floating-point
registers occupy two 32-bit "slots", and the FPSCR lives in
the second half of such a slot-pair (hence +1). For 64-bit,
the FPSCR instead occupies the full 64-bit 2-word-slot and
hence no adjustment is necessary. Hack around this. */
if (wordsize == 8 && PT_FPSCR == (48 + 32 + 1))
u_addr = (48 + 32) * wordsize;
/* If the FPSCR is 64-bit wide, we need to fetch the whole 64-bit
slot and not just its second word. The PT_FPSCR supplied when
GDB is compiled as a 32-bit app doesn't reflect this. */
else if (wordsize == 4 && register_size (gdbarch, regno) == 8
&& PT_FPSCR == (48 + 2*32 + 1))
u_addr = (48 + 2*32) * wordsize;
else
u_addr = PT_FPSCR * wordsize;
}
return u_addr;
}
/* The Linux kernel ptrace interface for POWER7 VSX registers uses the
registers set mechanism, as opposed to the interface for all the
other registers, that stores/fetches each register individually. */
static void
fetch_vsx_register (struct regcache *regcache, int tid, int regno)
{
int ret;
gdb_vsxregset_t regs;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getsetvsxregs = 0;
return;
}
perror_with_name (_("Unable to fetch VSX register"));
}
regcache_raw_supply (regcache, regno,
regs + (regno - tdep->ppc_vsr0_upper_regnum)
* vsxregsize);
}
/* The Linux kernel ptrace interface for AltiVec registers uses the
registers set mechanism, as opposed to the interface for all the
other registers, that stores/fetches each register individually. */
static void
fetch_altivec_register (struct regcache *regcache, int tid, int regno)
{
int ret;
int offset = 0;
gdb_vrregset_t regs;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int vrregsize = register_size (gdbarch, tdep->ppc_vr0_regnum);
ret = ptrace (PTRACE_GETVRREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getvrregs = 0;
return;
}
perror_with_name (_("Unable to fetch AltiVec register"));
}
/* VSCR is fetched as a 16 bytes quantity, but it is really 4 bytes
long on the hardware. We deal only with the lower 4 bytes of the
vector. VRSAVE is at the end of the array in a 4 bytes slot, so
there is no need to define an offset for it. */
if (regno == (tdep->ppc_vrsave_regnum - 1))
offset = vrregsize - register_size (gdbarch, tdep->ppc_vrsave_regnum);
regcache_raw_supply (regcache, regno,
regs + (regno - tdep->ppc_vr0_regnum) * vrregsize + offset);
}
/* Fetch the top 32 bits of TID's general-purpose registers and the
SPE-specific registers, and place the results in EVRREGSET. If we
don't support PTRACE_GETEVRREGS, then just fill EVRREGSET with
zeros.
All the logic to deal with whether or not the PTRACE_GETEVRREGS and
PTRACE_SETEVRREGS requests are supported is isolated here, and in
set_spe_registers. */
static void
get_spe_registers (int tid, struct gdb_evrregset_t *evrregset)
{
if (have_ptrace_getsetevrregs)
{
if (ptrace (PTRACE_GETEVRREGS, tid, 0, evrregset) >= 0)
return;
else
{
/* EIO means that the PTRACE_GETEVRREGS request isn't supported;
we just return zeros. */
if (errno == EIO)
have_ptrace_getsetevrregs = 0;
else
/* Anything else needs to be reported. */
perror_with_name (_("Unable to fetch SPE registers"));
}
}
memset (evrregset, 0, sizeof (*evrregset));
}
/* Supply values from TID for SPE-specific raw registers: the upper
halves of the GPRs, the accumulator, and the spefscr. REGNO must
be the number of an upper half register, acc, spefscr, or -1 to
supply the values of all registers. */
static void
fetch_spe_register (struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
struct gdb_evrregset_t evrregs;
gdb_assert (sizeof (evrregs.evr[0])
== register_size (gdbarch, tdep->ppc_ev0_upper_regnum));
gdb_assert (sizeof (evrregs.acc)
== register_size (gdbarch, tdep->ppc_acc_regnum));
gdb_assert (sizeof (evrregs.spefscr)
== register_size (gdbarch, tdep->ppc_spefscr_regnum));
get_spe_registers (tid, &evrregs);
if (regno == -1)
{
int i;
for (i = 0; i < ppc_num_gprs; i++)
regcache_raw_supply (regcache, tdep->ppc_ev0_upper_regnum + i,
&evrregs.evr[i]);
}
else if (tdep->ppc_ev0_upper_regnum <= regno
&& regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)
regcache_raw_supply (regcache, regno,
&evrregs.evr[regno - tdep->ppc_ev0_upper_regnum]);
if (regno == -1
|| regno == tdep->ppc_acc_regnum)
regcache_raw_supply (regcache, tdep->ppc_acc_regnum, &evrregs.acc);
if (regno == -1
|| regno == tdep->ppc_spefscr_regnum)
regcache_raw_supply (regcache, tdep->ppc_spefscr_regnum,
&evrregs.spefscr);
}
static void
fetch_register (struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* This isn't really an address. But ptrace thinks of it as one. */
CORE_ADDR regaddr = ppc_register_u_addr (gdbarch, regno);
int bytes_transferred;
unsigned int offset; /* Offset of registers within the u area. */
char buf[MAX_REGISTER_SIZE];
if (altivec_register_p (gdbarch, regno))
{
/* If this is the first time through, or if it is not the first
time through, and we have comfirmed that there is kernel
support for such a ptrace request, then go and fetch the
register. */
if (have_ptrace_getvrregs)
{
fetch_altivec_register (regcache, tid, regno);
return;
}
/* If we have discovered that there is no ptrace support for
AltiVec registers, fall through and return zeroes, because
regaddr will be -1 in this case. */
}
if (vsx_register_p (gdbarch, regno))
{
if (have_ptrace_getsetvsxregs)
{
fetch_vsx_register (regcache, tid, regno);
return;
}
}
else if (spe_register_p (gdbarch, regno))
{
fetch_spe_register (regcache, tid, regno);
return;
}
if (regaddr == -1)
{
memset (buf, '\0', register_size (gdbarch, regno)); /* Supply zeroes */
regcache_raw_supply (regcache, regno, buf);
return;
}
/* Read the raw register using sizeof(long) sized chunks. On a
32-bit platform, 64-bit floating-point registers will require two
transfers. */
for (bytes_transferred = 0;
bytes_transferred < register_size (gdbarch, regno);
bytes_transferred += sizeof (long))
{
errno = 0;
*(long *) &buf[bytes_transferred]
= ptrace (PTRACE_PEEKUSER, tid, (PTRACE_TYPE_ARG3) regaddr, 0);
regaddr += sizeof (long);
if (errno != 0)
{
char message[128];
sprintf (message, "reading register %s (#%d)",
gdbarch_register_name (gdbarch, regno), regno);
perror_with_name (message);
}
}
/* Now supply the register. Keep in mind that the regcache's idea
of the register's size may not be a multiple of sizeof
(long). */
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE)
{
/* Little-endian values are always found at the left end of the
bytes transferred. */
regcache_raw_supply (regcache, regno, buf);
}
else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
/* Big-endian values are found at the right end of the bytes
transferred. */
size_t padding = (bytes_transferred - register_size (gdbarch, regno));
regcache_raw_supply (regcache, regno, buf + padding);
}
else
internal_error (__FILE__, __LINE__,
_("fetch_register: unexpected byte order: %d"),
gdbarch_byte_order (gdbarch));
}
static void
supply_vsxregset (struct regcache *regcache, gdb_vsxregset_t *vsxregsetp)
{
int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
for (i = 0; i < ppc_num_vshrs; i++)
{
regcache_raw_supply (regcache, tdep->ppc_vsr0_upper_regnum + i,
*vsxregsetp + i * vsxregsize);
}
}
static void
supply_vrregset (struct regcache *regcache, gdb_vrregset_t *vrregsetp)
{
int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int num_of_vrregs = tdep->ppc_vrsave_regnum - tdep->ppc_vr0_regnum + 1;
int vrregsize = register_size (gdbarch, tdep->ppc_vr0_regnum);
int offset = vrregsize - register_size (gdbarch, tdep->ppc_vrsave_regnum);
for (i = 0; i < num_of_vrregs; i++)
{
/* The last 2 registers of this set are only 32 bit long, not
128. However an offset is necessary only for VSCR because it
occupies a whole vector, while VRSAVE occupies a full 4 bytes
slot. */
if (i == (num_of_vrregs - 2))
regcache_raw_supply (regcache, tdep->ppc_vr0_regnum + i,
*vrregsetp + i * vrregsize + offset);
else
regcache_raw_supply (regcache, tdep->ppc_vr0_regnum + i,
*vrregsetp + i * vrregsize);
}
}
static void
fetch_vsx_registers (struct regcache *regcache, int tid)
{
int ret;
gdb_vsxregset_t regs;
ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getsetvsxregs = 0;
return;
}
perror_with_name (_("Unable to fetch VSX registers"));
}
supply_vsxregset (regcache, ®s);
}
static void
fetch_altivec_registers (struct regcache *regcache, int tid)
{
int ret;
gdb_vrregset_t regs;
ret = ptrace (PTRACE_GETVRREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getvrregs = 0;
return;
}
perror_with_name (_("Unable to fetch AltiVec registers"));
}
supply_vrregset (regcache, ®s);
}
/* This function actually issues the request to ptrace, telling
it to get all general-purpose registers and put them into the
specified regset.
If the ptrace request does not exist, this function returns 0
and properly sets the have_ptrace_* flag. If the request fails,
this function calls perror_with_name. Otherwise, if the request
succeeds, then the regcache gets filled and 1 is returned. */
static int
fetch_all_gp_regs (struct regcache *regcache, int tid)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
gdb_gregset_t gregset;
if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0)
{
if (errno == EIO)
{
have_ptrace_getsetregs = 0;
return 0;
}
perror_with_name (_("Couldn't get general-purpose registers."));
}
supply_gregset (regcache, (const gdb_gregset_t *) &gregset);
return 1;
}
/* This is a wrapper for the fetch_all_gp_regs function. It is
responsible for verifying if this target has the ptrace request
that can be used to fetch all general-purpose registers at one
shot. If it doesn't, then we should fetch them using the
old-fashioned way, which is to iterate over the registers and
request them one by one. */
static void
fetch_gp_regs (struct regcache *regcache, int tid)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int i;
if (have_ptrace_getsetregs)
if (fetch_all_gp_regs (regcache, tid))
return;
/* If we've hit this point, it doesn't really matter which
architecture we are using. We just need to read the
registers in the "old-fashioned way". */
for (i = 0; i < ppc_num_gprs; i++)
fetch_register (regcache, tid, tdep->ppc_gp0_regnum + i);
}
/* This function actually issues the request to ptrace, telling
it to get all floating-point registers and put them into the
specified regset.
If the ptrace request does not exist, this function returns 0
and properly sets the have_ptrace_* flag. If the request fails,
this function calls perror_with_name. Otherwise, if the request
succeeds, then the regcache gets filled and 1 is returned. */
static int
fetch_all_fp_regs (struct regcache *regcache, int tid)
{
gdb_fpregset_t fpregs;
if (ptrace (PTRACE_GETFPREGS, tid, 0, (void *) &fpregs) < 0)
{
if (errno == EIO)
{
have_ptrace_getsetfpregs = 0;
return 0;
}
perror_with_name (_("Couldn't get floating-point registers."));
}
supply_fpregset (regcache, (const gdb_fpregset_t *) &fpregs);
return 1;
}
/* This is a wrapper for the fetch_all_fp_regs function. It is
responsible for verifying if this target has the ptrace request
that can be used to fetch all floating-point registers at one
shot. If it doesn't, then we should fetch them using the
old-fashioned way, which is to iterate over the registers and
request them one by one. */
static void
fetch_fp_regs (struct regcache *regcache, int tid)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int i;
if (have_ptrace_getsetfpregs)
if (fetch_all_fp_regs (regcache, tid))
return;
/* If we've hit this point, it doesn't really matter which
architecture we are using. We just need to read the
registers in the "old-fashioned way". */
for (i = 0; i < ppc_num_fprs; i++)
fetch_register (regcache, tid, tdep->ppc_fp0_regnum + i);
}
static void
fetch_ppc_registers (struct regcache *regcache, int tid)
{
int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
fetch_gp_regs (regcache, tid);
if (tdep->ppc_fp0_regnum >= 0)
fetch_fp_regs (regcache, tid);
fetch_register (regcache, tid, gdbarch_pc_regnum (gdbarch));
if (tdep->ppc_ps_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_ps_regnum);
if (tdep->ppc_cr_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_cr_regnum);
if (tdep->ppc_lr_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_lr_regnum);
if (tdep->ppc_ctr_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_ctr_regnum);
if (tdep->ppc_xer_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_xer_regnum);
if (tdep->ppc_mq_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_mq_regnum);
if (ppc_linux_trap_reg_p (gdbarch))
{
fetch_register (regcache, tid, PPC_ORIG_R3_REGNUM);
fetch_register (regcache, tid, PPC_TRAP_REGNUM);
}
if (tdep->ppc_fpscr_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_fpscr_regnum);
if (have_ptrace_getvrregs)
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
fetch_altivec_registers (regcache, tid);
if (have_ptrace_getsetvsxregs)
if (tdep->ppc_vsr0_upper_regnum != -1)
fetch_vsx_registers (regcache, tid);
if (tdep->ppc_ev0_upper_regnum >= 0)
fetch_spe_register (regcache, tid, -1);
}
/* Fetch registers from the child process. Fetch all registers if
regno == -1, otherwise fetch all general registers or all floating
point registers depending upon the value of regno. */
static void
ppc_linux_fetch_inferior_registers (struct target_ops *ops,
struct regcache *regcache, int regno)
{
/* Overload thread id onto process id */
int tid = TIDGET (inferior_ptid);
/* No thread id, just use process id */
if (tid == 0)
tid = PIDGET (inferior_ptid);
if (regno == -1)
fetch_ppc_registers (regcache, tid);
else
fetch_register (regcache, tid, regno);
}
/* Store one VSX register. */
static void
store_vsx_register (const struct regcache *regcache, int tid, int regno)
{
int ret;
gdb_vsxregset_t regs;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getsetvsxregs = 0;
return;
}
perror_with_name (_("Unable to fetch VSX register"));
}
regcache_raw_collect (regcache, regno, regs +
(regno - tdep->ppc_vsr0_upper_regnum) * vsxregsize);
ret = ptrace (PTRACE_SETVSXREGS, tid, 0, ®s);
if (ret < 0)
perror_with_name (_("Unable to store VSX register"));
}
/* Store one register. */
static void
store_altivec_register (const struct regcache *regcache, int tid, int regno)
{
int ret;
int offset = 0;
gdb_vrregset_t regs;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int vrregsize = register_size (gdbarch, tdep->ppc_vr0_regnum);
ret = ptrace (PTRACE_GETVRREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getvrregs = 0;
return;
}
perror_with_name (_("Unable to fetch AltiVec register"));
}
/* VSCR is fetched as a 16 bytes quantity, but it is really 4 bytes
long on the hardware. */
if (regno == (tdep->ppc_vrsave_regnum - 1))
offset = vrregsize - register_size (gdbarch, tdep->ppc_vrsave_regnum);
regcache_raw_collect (regcache, regno,
regs + (regno - tdep->ppc_vr0_regnum) * vrregsize + offset);
ret = ptrace (PTRACE_SETVRREGS, tid, 0, ®s);
if (ret < 0)
perror_with_name (_("Unable to store AltiVec register"));
}
/* Assuming TID referrs to an SPE process, set the top halves of TID's
general-purpose registers and its SPE-specific registers to the
values in EVRREGSET. If we don't support PTRACE_SETEVRREGS, do
nothing.
All the logic to deal with whether or not the PTRACE_GETEVRREGS and
PTRACE_SETEVRREGS requests are supported is isolated here, and in
get_spe_registers. */
static void
set_spe_registers (int tid, struct gdb_evrregset_t *evrregset)
{
if (have_ptrace_getsetevrregs)
{
if (ptrace (PTRACE_SETEVRREGS, tid, 0, evrregset) >= 0)
return;
else
{
/* EIO means that the PTRACE_SETEVRREGS request isn't
supported; we fail silently, and don't try the call
again. */
if (errno == EIO)
have_ptrace_getsetevrregs = 0;
else
/* Anything else needs to be reported. */
perror_with_name (_("Unable to set SPE registers"));
}
}
}
/* Write GDB's value for the SPE-specific raw register REGNO to TID.
If REGNO is -1, write the values of all the SPE-specific
registers. */
static void
store_spe_register (const struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
struct gdb_evrregset_t evrregs;
gdb_assert (sizeof (evrregs.evr[0])
== register_size (gdbarch, tdep->ppc_ev0_upper_regnum));
gdb_assert (sizeof (evrregs.acc)
== register_size (gdbarch, tdep->ppc_acc_regnum));
gdb_assert (sizeof (evrregs.spefscr)
== register_size (gdbarch, tdep->ppc_spefscr_regnum));
if (regno == -1)
/* Since we're going to write out every register, the code below
should store to every field of evrregs; if that doesn't happen,
make it obvious by initializing it with suspicious values. */
memset (&evrregs, 42, sizeof (evrregs));
else
/* We can only read and write the entire EVR register set at a
time, so to write just a single register, we do a
read-modify-write maneuver. */
get_spe_registers (tid, &evrregs);
if (regno == -1)
{
int i;
for (i = 0; i < ppc_num_gprs; i++)
regcache_raw_collect (regcache,
tdep->ppc_ev0_upper_regnum + i,
&evrregs.evr[i]);
}
else if (tdep->ppc_ev0_upper_regnum <= regno
&& regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)
regcache_raw_collect (regcache, regno,
&evrregs.evr[regno - tdep->ppc_ev0_upper_regnum]);
if (regno == -1
|| regno == tdep->ppc_acc_regnum)
regcache_raw_collect (regcache,
tdep->ppc_acc_regnum,
&evrregs.acc);
if (regno == -1
|| regno == tdep->ppc_spefscr_regnum)
regcache_raw_collect (regcache,
tdep->ppc_spefscr_regnum,
&evrregs.spefscr);
/* Write back the modified register set. */
set_spe_registers (tid, &evrregs);
}
static void
store_register (const struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* This isn't really an address. But ptrace thinks of it as one. */
CORE_ADDR regaddr = ppc_register_u_addr (gdbarch, regno);
int i;
size_t bytes_to_transfer;
char buf[MAX_REGISTER_SIZE];
if (altivec_register_p (gdbarch, regno))
{
store_altivec_register (regcache, tid, regno);
return;
}
if (vsx_register_p (gdbarch, regno))
{
store_vsx_register (regcache, tid, regno);
return;
}
else if (spe_register_p (gdbarch, regno))
{
store_spe_register (regcache, tid, regno);
return;
}
if (regaddr == -1)
return;
/* First collect the register. Keep in mind that the regcache's
idea of the register's size may not be a multiple of sizeof
(long). */
memset (buf, 0, sizeof buf);
bytes_to_transfer = align_up (register_size (gdbarch, regno), sizeof (long));
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE)
{
/* Little-endian values always sit at the left end of the buffer. */
regcache_raw_collect (regcache, regno, buf);
}
else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
/* Big-endian values sit at the right end of the buffer. */
size_t padding = (bytes_to_transfer - register_size (gdbarch, regno));
regcache_raw_collect (regcache, regno, buf + padding);
}
for (i = 0; i < bytes_to_transfer; i += sizeof (long))
{
errno = 0;
ptrace (PTRACE_POKEUSER, tid, (PTRACE_TYPE_ARG3) regaddr,
*(long *) &buf[i]);
regaddr += sizeof (long);
if (errno == EIO
&& (regno == tdep->ppc_fpscr_regnum
|| regno == PPC_ORIG_R3_REGNUM
|| regno == PPC_TRAP_REGNUM))
{
/* Some older kernel versions don't allow fpscr, orig_r3
or trap to be written. */
continue;
}
if (errno != 0)
{
char message[128];
sprintf (message, "writing register %s (#%d)",
gdbarch_register_name (gdbarch, regno), regno);
perror_with_name (message);
}
}
}
static void
fill_vsxregset (const struct regcache *regcache, gdb_vsxregset_t *vsxregsetp)
{
int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
for (i = 0; i < ppc_num_vshrs; i++)
regcache_raw_collect (regcache, tdep->ppc_vsr0_upper_regnum + i,
*vsxregsetp + i * vsxregsize);
}
static void
fill_vrregset (const struct regcache *regcache, gdb_vrregset_t *vrregsetp)
{
int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int num_of_vrregs = tdep->ppc_vrsave_regnum - tdep->ppc_vr0_regnum + 1;
int vrregsize = register_size (gdbarch, tdep->ppc_vr0_regnum);
int offset = vrregsize - register_size (gdbarch, tdep->ppc_vrsave_regnum);
for (i = 0; i < num_of_vrregs; i++)
{
/* The last 2 registers of this set are only 32 bit long, not
128, but only VSCR is fetched as a 16 bytes quantity. */
if (i == (num_of_vrregs - 2))
regcache_raw_collect (regcache, tdep->ppc_vr0_regnum + i,
*vrregsetp + i * vrregsize + offset);
else
regcache_raw_collect (regcache, tdep->ppc_vr0_regnum + i,
*vrregsetp + i * vrregsize);
}
}
static void
store_vsx_registers (const struct regcache *regcache, int tid)
{
int ret;
gdb_vsxregset_t regs;
ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getsetvsxregs = 0;
return;
}
perror_with_name (_("Couldn't get VSX registers"));
}
fill_vsxregset (regcache, ®s);
if (ptrace (PTRACE_SETVSXREGS, tid, 0, ®s) < 0)
perror_with_name (_("Couldn't write VSX registers"));
}
static void
store_altivec_registers (const struct regcache *regcache, int tid)
{
int ret;
gdb_vrregset_t regs;
ret = ptrace (PTRACE_GETVRREGS, tid, 0, ®s);
if (ret < 0)
{
if (errno == EIO)
{
have_ptrace_getvrregs = 0;
return;
}
perror_with_name (_("Couldn't get AltiVec registers"));
}
fill_vrregset (regcache, ®s);
if (ptrace (PTRACE_SETVRREGS, tid, 0, ®s) < 0)
perror_with_name (_("Couldn't write AltiVec registers"));
}
/* This function actually issues the request to ptrace, telling
it to store all general-purpose registers present in the specified
regset.
If the ptrace request does not exist, this function returns 0
and properly sets the have_ptrace_* flag. If the request fails,
this function calls perror_with_name. Otherwise, if the request
succeeds, then the regcache is stored and 1 is returned. */
static int
store_all_gp_regs (const struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
gdb_gregset_t gregset;
if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0)
{
if (errno == EIO)
{
have_ptrace_getsetregs = 0;
return 0;
}
perror_with_name (_("Couldn't get general-purpose registers."));
}
fill_gregset (regcache, &gregset, regno);
if (ptrace (PTRACE_SETREGS, tid, 0, (void *) &gregset) < 0)
{
if (errno == EIO)
{
have_ptrace_getsetregs = 0;
return 0;
}
perror_with_name (_("Couldn't set general-purpose registers."));
}
return 1;
}
/* This is a wrapper for the store_all_gp_regs function. It is
responsible for verifying if this target has the ptrace request
that can be used to store all general-purpose registers at one
shot. If it doesn't, then we should store them using the
old-fashioned way, which is to iterate over the registers and
store them one by one. */
static void
store_gp_regs (const struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int i;
if (have_ptrace_getsetregs)
if (store_all_gp_regs (regcache, tid, regno))
return;
/* If we hit this point, it doesn't really matter which
architecture we are using. We just need to store the
registers in the "old-fashioned way". */
for (i = 0; i < ppc_num_gprs; i++)
store_register (regcache, tid, tdep->ppc_gp0_regnum + i);
}
/* This function actually issues the request to ptrace, telling
it to store all floating-point registers present in the specified
regset.
If the ptrace request does not exist, this function returns 0
and properly sets the have_ptrace_* flag. If the request fails,
this function calls perror_with_name. Otherwise, if the request
succeeds, then the regcache is stored and 1 is returned. */
static int
store_all_fp_regs (const struct regcache *regcache, int tid, int regno)
{
gdb_fpregset_t fpregs;
if (ptrace (PTRACE_GETFPREGS, tid, 0, (void *) &fpregs) < 0)
{
if (errno == EIO)
{
have_ptrace_getsetfpregs = 0;
return 0;
}
perror_with_name (_("Couldn't get floating-point registers."));
}
fill_fpregset (regcache, &fpregs, regno);
if (ptrace (PTRACE_SETFPREGS, tid, 0, (void *) &fpregs) < 0)
{
if (errno == EIO)
{
have_ptrace_getsetfpregs = 0;
return 0;
}
perror_with_name (_("Couldn't set floating-point registers."));
}
return 1;
}
/* This is a wrapper for the store_all_fp_regs function. It is
responsible for verifying if this target has the ptrace request
that can be used to store all floating-point registers at one
shot. If it doesn't, then we should store them using the
old-fashioned way, which is to iterate over the registers and
store them one by one. */
static void
store_fp_regs (const struct regcache *regcache, int tid, int regno)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int i;
if (have_ptrace_getsetfpregs)
if (store_all_fp_regs (regcache, tid, regno))
return;
/* If we hit this point, it doesn't really matter which
architecture we are using. We just need to store the
registers in the "old-fashioned way". */
for (i = 0; i < ppc_num_fprs; i++)
store_register (regcache, tid, tdep->ppc_fp0_regnum + i);
}
static void
store_ppc_registers (const struct regcache *regcache, int tid)
{
int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
store_gp_regs (regcache, tid, -1);
if (tdep->ppc_fp0_regnum >= 0)
store_fp_regs (regcache, tid, -1);
store_register (regcache, tid, gdbarch_pc_regnum (gdbarch));
if (tdep->ppc_ps_regnum != -1)
store_register (regcache, tid, tdep->ppc_ps_regnum);
if (tdep->ppc_cr_regnum != -1)
store_register (regcache, tid, tdep->ppc_cr_regnum);
if (tdep->ppc_lr_regnum != -1)
store_register (regcache, tid, tdep->ppc_lr_regnum);
if (tdep->ppc_ctr_regnum != -1)
store_register (regcache, tid, tdep->ppc_ctr_regnum);
if (tdep->ppc_xer_regnum != -1)
store_register (regcache, tid, tdep->ppc_xer_regnum);
if (tdep->ppc_mq_regnum != -1)
store_register (regcache, tid, tdep->ppc_mq_regnum);
if (tdep->ppc_fpscr_regnum != -1)
store_register (regcache, tid, tdep->ppc_fpscr_regnum);
if (ppc_linux_trap_reg_p (gdbarch))
{
store_register (regcache, tid, PPC_ORIG_R3_REGNUM);
store_register (regcache, tid, PPC_TRAP_REGNUM);
}
if (have_ptrace_getvrregs)
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
store_altivec_registers (regcache, tid);
if (have_ptrace_getsetvsxregs)
if (tdep->ppc_vsr0_upper_regnum != -1)
store_vsx_registers (regcache, tid);
if (tdep->ppc_ev0_upper_regnum >= 0)
store_spe_register (regcache, tid, -1);
}
/* Fetch the AT_HWCAP entry from the aux vector. */
unsigned long ppc_linux_get_hwcap (void)
{
CORE_ADDR field;
if (target_auxv_search (¤t_target, AT_HWCAP, &field))
return (unsigned long) field;
return 0;
}
/* The cached DABR value, to install in new threads.
This variable is used when we are dealing with non-BookE
processors. */
static long saved_dabr_value;
/* Global structure that will store information about the available
features on this BookE processor. */
static struct ppc_debug_info booke_debug_info;
/* Global variable that holds the maximum number of slots that the
kernel will use. This is only used when the processor is BookE. */
static size_t max_slots_number = 0;
struct hw_break_tuple
{
long slot;
struct ppc_hw_breakpoint *hw_break;
};
/* This is an internal VEC created to store information about *points inserted
for each thread. This is used for BookE processors. */
typedef struct thread_points
{
/* The TID to which this *point relates. */
int tid;
/* Information about the *point, such as its address, type, etc.
Each element inside this vector corresponds to a hardware
breakpoint or watchpoint in the thread represented by TID. The maximum
size of these vector is MAX_SLOTS_NUMBER. If the hw_break element of
the tuple is NULL, then the position in the vector is free. */
struct hw_break_tuple *hw_breaks;
} *thread_points_p;
DEF_VEC_P (thread_points_p);
VEC(thread_points_p) *ppc_threads = NULL;
/* The version of the kernel interface that we will use if the processor is
BookE. */
#define PPC_DEBUG_CURRENT_VERSION 1
/* Returns non-zero if we support the ptrace interface which enables
booke debugging resources. */
static int
have_ptrace_booke_interface (void)
{
static int have_ptrace_booke_interface = -1;
if (have_ptrace_booke_interface == -1)
{
int tid;
tid = TIDGET (inferior_ptid);
if (tid == 0)
tid = PIDGET (inferior_ptid);
/* Check for kernel support for BOOKE debug registers. */
if (ptrace (PPC_PTRACE_GETHWDBGINFO, tid, 0, &booke_debug_info) >= 0)
{
have_ptrace_booke_interface = 1;
max_slots_number = booke_debug_info.num_instruction_bps
+ booke_debug_info.num_data_bps + booke_debug_info.num_condition_regs;
}
else
{
/* Old school interface and no BOOKE debug registers support. */
have_ptrace_booke_interface = 0;
memset (&booke_debug_info, 0, sizeof (struct ppc_debug_info));
}
}
return have_ptrace_booke_interface;
}
static int
ppc_linux_can_use_hw_breakpoint (int type, int cnt, int ot)
{
int total_hw_wp, total_hw_bp;
if (have_ptrace_booke_interface ())
{
/* For PPC BookE processors, the number of available hardware
watchpoints and breakpoints is stored at the booke_debug_info
struct. */
total_hw_bp = booke_debug_info.num_instruction_bps;
total_hw_wp = booke_debug_info.num_data_bps;
}
else
{
/* For PPC server processors, we accept 1 hardware watchpoint and 0
hardware breakpoints. */
total_hw_bp = 0;
total_hw_wp = 1;
}
if (type == bp_hardware_watchpoint || type == bp_read_watchpoint
|| type == bp_access_watchpoint || type == bp_watchpoint)
{
if (cnt > total_hw_wp)
return -1;
}
else if (type == bp_hardware_breakpoint)
{
if (cnt > total_hw_bp)
return -1;
}
if (!have_ptrace_booke_interface ())
{
int tid;
ptid_t ptid = inferior_ptid;
/* We need to know whether ptrace supports PTRACE_SET_DEBUGREG and whether
the target has DABR. If either answer is no, the ptrace call will
return -1. Fail in that case. */
tid = TIDGET (ptid);
if (tid == 0)
tid = PIDGET (ptid);
if (ptrace (PTRACE_SET_DEBUGREG, tid, 0, 0) == -1)
return 0;
}
return 1;
}
static int
ppc_linux_region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
{
/* Handle sub-8-byte quantities. */
if (len <= 0)
return 0;
/* The new BookE ptrace interface tells if there are alignment restrictions
for watchpoints in the processors. In that case, we use that information
to determine the hardcoded watchable region for watchpoints. */
if (have_ptrace_booke_interface ())
{
if (booke_debug_info.data_bp_alignment
&& (addr + len > (addr & ~(booke_debug_info.data_bp_alignment - 1))
+ booke_debug_info.data_bp_alignment))
return 0;
}
/* addr+len must fall in the 8 byte watchable region for DABR-based
processors (i.e., server processors). Without the new BookE ptrace
interface, DAC-based processors (i.e., embedded processors) will use
addresses aligned to 4-bytes due to the way the read/write flags are
passed in the old ptrace interface. */
else if (((ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
&& (addr + len) > (addr & ~3) + 4)
|| (addr + len) > (addr & ~7) + 8)
return 0;
return 1;
}
/* This function compares two ppc_hw_breakpoint structs field-by-field. */
static int
booke_cmp_hw_point (struct ppc_hw_breakpoint *a, struct ppc_hw_breakpoint *b)
{
return (a->trigger_type == b->trigger_type
&& a->addr_mode == b->addr_mode
&& a->condition_mode == b->condition_mode
&& a->addr == b->addr
&& a->addr2 == b->addr2
&& a->condition_value == b->condition_value);
}
/* This function can be used to retrieve a thread_points by the TID of the
related process/thread. If nothing has been found, and ALLOC_NEW is 0,
it returns NULL. If ALLOC_NEW is non-zero, a new thread_points for the
provided TID will be created and returned. */
static struct thread_points *
booke_find_thread_points_by_tid (int tid, int alloc_new)
{
int i;
struct thread_points *t;
for (i = 0; VEC_iterate (thread_points_p, ppc_threads, i, t); i++)
if (t->tid == tid)
return t;
t = NULL;
/* Do we need to allocate a new point_item
if the wanted one does not exist? */
if (alloc_new)
{
t = xmalloc (sizeof (struct thread_points));
t->hw_breaks = xzalloc (max_slots_number * sizeof (struct hw_break_tuple));
t->tid = tid;
VEC_safe_push (thread_points_p, ppc_threads, t);
}
return t;
}
/* This function is a generic wrapper that is responsible for inserting a
*point (i.e., calling `ptrace' in order to issue the request to the
kernel) and registering it internally in GDB. */
static void
booke_insert_point (struct ppc_hw_breakpoint *b, int tid)
{
int i;
long slot;
struct ppc_hw_breakpoint *p = xmalloc (sizeof (struct ppc_hw_breakpoint));
struct hw_break_tuple *hw_breaks;
struct cleanup *c = make_cleanup (xfree, p);
struct thread_points *t;
struct hw_break_tuple *tuple;
memcpy (p, b, sizeof (struct ppc_hw_breakpoint));
errno = 0;
slot = ptrace (PPC_PTRACE_SETHWDEBUG, tid, 0, p);
if (slot < 0)
perror_with_name (_("Unexpected error setting breakpoint or watchpoint"));
/* Everything went fine, so we have to register this *point. */
t = booke_find_thread_points_by_tid (tid, 1);
gdb_assert (t != NULL);
hw_breaks = t->hw_breaks;
/* Find a free element in the hw_breaks vector. */
for (i = 0; i < max_slots_number; i++)
if (hw_breaks[i].hw_break == NULL)
{
hw_breaks[i].slot = slot;
hw_breaks[i].hw_break = p;
break;
}
gdb_assert (i != max_slots_number);
discard_cleanups (c);
}
/* This function is a generic wrapper that is responsible for removing a
*point (i.e., calling `ptrace' in order to issue the request to the
kernel), and unregistering it internally at GDB. */
static void
booke_remove_point (struct ppc_hw_breakpoint *b, int tid)
{
int i;
struct hw_break_tuple *hw_breaks;
struct thread_points *t;
t = booke_find_thread_points_by_tid (tid, 0);
gdb_assert (t != NULL);
hw_breaks = t->hw_breaks;
for (i = 0; i < max_slots_number; i++)
if (hw_breaks[i].hw_break && booke_cmp_hw_point (hw_breaks[i].hw_break, b))
break;
gdb_assert (i != max_slots_number);
/* We have to ignore ENOENT errors because the kernel implements hardware
breakpoints/watchpoints as "one-shot", that is, they are automatically
deleted when hit. */
errno = 0;
if (ptrace (PPC_PTRACE_DELHWDEBUG, tid, 0, hw_breaks[i].slot) < 0)
if (errno != ENOENT)
perror_with_name (_("Unexpected error deleting breakpoint or watchpoint"));
xfree (hw_breaks[i].hw_break);
hw_breaks[i].hw_break = NULL;
}
static int
ppc_linux_insert_hw_breakpoint (struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
ptid_t ptid;
struct lwp_info *lp;
struct ppc_hw_breakpoint p;
if (!have_ptrace_booke_interface ())
return -1;
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.addr = (uint64_t) bp_tgt->placed_address;
p.addr2 = 0;
p.condition_value = 0;
ALL_LWPS (lp, ptid)
booke_insert_point (&p, TIDGET (ptid));
return 0;
}
static int
ppc_linux_remove_hw_breakpoint (struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
ptid_t ptid;
struct lwp_info *lp;
struct ppc_hw_breakpoint p;
if (!have_ptrace_booke_interface ())
return -1;
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.addr = (uint64_t) bp_tgt->placed_address;
p.addr2 = 0;
p.condition_value = 0;
ALL_LWPS (lp, ptid)
booke_remove_point (&p, TIDGET (ptid));
return 0;
}
static int
get_trigger_type (int rw)
{
int t;
if (rw == hw_read)
t = PPC_BREAKPOINT_TRIGGER_READ;
else if (rw == hw_write)
t = PPC_BREAKPOINT_TRIGGER_WRITE;
else
t = PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE;
return t;
}
/* Check whether we have at least one free DVC register. */
static int
can_use_watchpoint_cond_accel (void)
{
struct thread_points *p;
int tid = TIDGET (inferior_ptid);
int cnt = booke_debug_info.num_condition_regs, i;
CORE_ADDR tmp_value;
if (!have_ptrace_booke_interface () || cnt == 0)
return 0;
p = booke_find_thread_points_by_tid (tid, 0);
if (p)
{
for (i = 0; i < max_slots_number; i++)
if (p->hw_breaks[i].hw_break != NULL
&& (p->hw_breaks[i].hw_break->condition_mode
!= PPC_BREAKPOINT_CONDITION_NONE))
cnt--;
/* There are no available slots now. */
if (cnt <= 0)
return 0;
}
return 1;
}
/* Calculate the enable bits and the contents of the Data Value Compare
debug register present in BookE processors.
ADDR is the address to be watched, LEN is the length of watched data
and DATA_VALUE is the value which will trigger the watchpoint.
On exit, CONDITION_MODE will hold the enable bits for the DVC, and
CONDITION_VALUE will hold the value which should be put in the
DVC register. */
static void
calculate_dvc (CORE_ADDR addr, int len, CORE_ADDR data_value,
uint32_t *condition_mode, uint64_t *condition_value)
{
int i, num_byte_enable, align_offset, num_bytes_off_dvc,
rightmost_enabled_byte;
CORE_ADDR addr_end_data, addr_end_dvc;
/* The DVC register compares bytes within fixed-length windows which
are word-aligned, with length equal to that of the DVC register.
We need to calculate where our watch region is relative to that
window and enable comparison of the bytes which fall within it. */
align_offset = addr % booke_debug_info.sizeof_condition;
addr_end_data = addr + len;
addr_end_dvc = (addr - align_offset
+ booke_debug_info.sizeof_condition);
num_bytes_off_dvc = (addr_end_data > addr_end_dvc)?
addr_end_data - addr_end_dvc : 0;
num_byte_enable = len - num_bytes_off_dvc;
/* Here, bytes are numbered from right to left. */
rightmost_enabled_byte = (addr_end_data < addr_end_dvc)?
addr_end_dvc - addr_end_data : 0;
*condition_mode = PPC_BREAKPOINT_CONDITION_AND;
for (i = 0; i < num_byte_enable; i++)
*condition_mode |= PPC_BREAKPOINT_CONDITION_BE (i + rightmost_enabled_byte);
/* Now we need to match the position within the DVC of the comparison
value with where the watch region is relative to the window
(i.e., the ALIGN_OFFSET). */
*condition_value = ((uint64_t) data_value >> num_bytes_off_dvc * 8
<< rightmost_enabled_byte * 8);
}
/* Return the number of memory locations that need to be accessed to
evaluate the expression which generated the given value chain.
Returns -1 if there's any register access involved, or if there are
other kinds of values which are not acceptable in a condition
expression (e.g., lval_computed or lval_internalvar). */
static int
num_memory_accesses (struct value *v)
{
int found_memory_cnt = 0;
struct value *head = v;
/* The idea here is that evaluating an expression generates a series
of values, one holding the value of every subexpression. (The
expression a*b+c has five subexpressions: a, b, a*b, c, and
a*b+c.) GDB's values hold almost enough information to establish
the criteria given above --- they identify memory lvalues,
register lvalues, computed values, etcetera. So we can evaluate
the expression, and then scan the chain of values that leaves
behind to determine the memory locations involved in the evaluation
of an expression.
However, I don't think that the values returned by inferior
function calls are special in any way. So this function may not
notice that an expression contains an inferior function call.
FIXME. */
for (; v; v = value_next (v))
{
/* Constants and values from the history are fine. */
if (VALUE_LVAL (v) == not_lval || deprecated_value_modifiable (v) == 0)
continue;
else if (VALUE_LVAL (v) == lval_memory)
{
/* A lazy memory lvalue is one that GDB never needed to fetch;
we either just used its address (e.g., `a' in `a.b') or
we never needed it at all (e.g., `a' in `a,b'). */
if (!value_lazy (v))
found_memory_cnt++;
}
/* Other kinds of values are not fine. */
else
return -1;
}
return found_memory_cnt;
}
/* Verifies whether the expression COND can be implemented using the
DVC (Data Value Compare) register in BookE processors. The expression
must test the watch value for equality with a constant expression.
If the function returns 1, DATA_VALUE will contain the constant against
which the watch value should be compared. */
static int
check_condition (CORE_ADDR watch_addr, struct expression *cond,
CORE_ADDR *data_value)
{
int pc = 1, num_accesses_left, num_accesses_right;
struct value *left_val, *right_val, *left_chain, *right_chain;
if (cond->elts[0].opcode != BINOP_EQUAL)
return 0;
fetch_subexp_value (cond, &pc, &left_val, NULL, &left_chain);
num_accesses_left = num_memory_accesses (left_chain);
if (left_val == NULL || num_accesses_left < 0)
{
free_value_chain (left_chain);
return 0;
}
fetch_subexp_value (cond, &pc, &right_val, NULL, &right_chain);
num_accesses_right = num_memory_accesses (right_chain);
if (right_val == NULL || num_accesses_right < 0)
{
free_value_chain (left_chain);
free_value_chain (right_chain);
return 0;
}
if (num_accesses_left == 1 && num_accesses_right == 0
&& VALUE_LVAL (left_val) == lval_memory
&& value_address (left_val) == watch_addr)
*data_value = value_as_long (right_val);
else if (num_accesses_left == 0 && num_accesses_right == 1
&& VALUE_LVAL (right_val) == lval_memory
&& value_address (right_val) == watch_addr)
*data_value = value_as_long (left_val);
else
{
free_value_chain (left_chain);
free_value_chain (right_chain);
return 0;
}
free_value_chain (left_chain);
free_value_chain (right_chain);
return 1;
}
/* Return non-zero if the target is capable of using hardware to evaluate
the condition expression, thus only triggering the watchpoint when it is
true. */
static int
ppc_linux_can_accel_watchpoint_condition (CORE_ADDR addr, int len, int rw,
struct expression *cond)
{
CORE_ADDR data_value;
return (have_ptrace_booke_interface ()
&& booke_debug_info.num_condition_regs > 0
&& check_condition (addr, cond, &data_value));
}
static int
ppc_linux_insert_watchpoint (CORE_ADDR addr, int len, int rw,
struct expression *cond)
{
struct lwp_info *lp;
ptid_t ptid;
int ret = -1;
if (have_ptrace_booke_interface ())
{
struct ppc_hw_breakpoint p;
CORE_ADDR data_value;
if (cond && can_use_watchpoint_cond_accel ()
&& check_condition (addr, cond, &data_value))
calculate_dvc (addr, len, data_value, &p.condition_mode,
&p.condition_value);
else
{
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.condition_value = 0;
}
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = get_trigger_type (rw);
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.addr = (uint64_t) addr;
p.addr2 = 0;
ALL_LWPS (lp, ptid)
booke_insert_point (&p, TIDGET (ptid));
ret = 0;
}
else
{
long dabr_value;
long read_mode, write_mode;
if (ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
{
/* PowerPC 440 requires only the read/write flags to be passed
to the kernel. */
read_mode = 1;
write_mode = 2;
}
else
{
/* PowerPC 970 and other DABR-based processors are required to pass
the Breakpoint Translation bit together with the flags. */
read_mode = 5;
write_mode = 6;
}
dabr_value = addr & ~(read_mode | write_mode);
switch (rw)
{
case hw_read:
/* Set read and translate bits. */
dabr_value |= read_mode;
break;
case hw_write:
/* Set write and translate bits. */
dabr_value |= write_mode;
break;
case hw_access:
/* Set read, write and translate bits. */
dabr_value |= read_mode | write_mode;
break;
}
saved_dabr_value = dabr_value;
ALL_LWPS (lp, ptid)
if (ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0,
saved_dabr_value) < 0)
return -1;
ret = 0;
}
return ret;
}
static int
ppc_linux_remove_watchpoint (CORE_ADDR addr, int len, int rw,
struct expression *cond)
{
struct lwp_info *lp;
ptid_t ptid;
int ret = -1;
if (have_ptrace_booke_interface ())
{
struct ppc_hw_breakpoint p;
CORE_ADDR data_value;
if (cond && booke_debug_info.num_condition_regs > 0
&& check_condition (addr, cond, &data_value))
calculate_dvc (addr, len, data_value, &p.condition_mode,
&p.condition_value);
else
{
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.condition_value = 0;
}
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = get_trigger_type (rw);
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.addr = (uint64_t) addr;
p.addr2 = 0;
ALL_LWPS (lp, ptid)
booke_remove_point (&p, TIDGET (ptid));
ret = 0;
}
else
{
saved_dabr_value = 0;
ALL_LWPS (lp, ptid)
if (ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0,
saved_dabr_value) < 0)
return -1;
ret = 0;
}
return ret;
}
static void
ppc_linux_new_thread (ptid_t ptid)
{
int tid = TIDGET (ptid);
if (have_ptrace_booke_interface ())
{
int i;
struct thread_points *p;
struct hw_break_tuple *hw_breaks;
if (VEC_empty (thread_points_p, ppc_threads))
return;
/* Get a list of breakpoints from any thread. */
p = VEC_last (thread_points_p, ppc_threads);
hw_breaks = p->hw_breaks;
/* Copy that thread's breakpoints and watchpoints to the new thread. */
for (i = 0; i < max_slots_number; i++)
if (hw_breaks[i].hw_break)
booke_insert_point (hw_breaks[i].hw_break, tid);
}
else
ptrace (PTRACE_SET_DEBUGREG, tid, 0, saved_dabr_value);
}
static void
ppc_linux_thread_exit (struct thread_info *tp, int silent)
{
int i;
int tid = TIDGET (tp->ptid);
struct hw_break_tuple *hw_breaks;
struct thread_points *t = NULL, *p;
if (!have_ptrace_booke_interface ())
return;
for (i = 0; VEC_iterate (thread_points_p, ppc_threads, i, p); i++)
if (p->tid == tid)
{
t = p;
break;
}
if (t == NULL)
return;
VEC_unordered_remove (thread_points_p, ppc_threads, i);
hw_breaks = t->hw_breaks;
for (i = 0; i < max_slots_number; i++)
if (hw_breaks[i].hw_break)
xfree (hw_breaks[i].hw_break);
xfree (t->hw_breaks);
xfree (t);
}
static int
ppc_linux_stopped_data_address (struct target_ops *target, CORE_ADDR *addr_p)
{
struct siginfo *siginfo_p;
siginfo_p = linux_nat_get_siginfo (inferior_ptid);
if (siginfo_p->si_signo != SIGTRAP
|| (siginfo_p->si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */)
return 0;
if (have_ptrace_booke_interface ())
{
int i;
struct thread_points *t;
struct hw_break_tuple *hw_breaks;
/* The index (or slot) of the *point is passed in the si_errno field. */
int slot = siginfo_p->si_errno;
t = booke_find_thread_points_by_tid (TIDGET (inferior_ptid), 0);
/* Find out if this *point is a hardware breakpoint.
If so, we should return 0. */
if (t)
{
hw_breaks = t->hw_breaks;
for (i = 0; i < max_slots_number; i++)
if (hw_breaks[i].hw_break && hw_breaks[i].slot == slot
&& hw_breaks[i].hw_break->trigger_type
== PPC_BREAKPOINT_TRIGGER_EXECUTE)
return 0;
}
}
*addr_p = (CORE_ADDR) (uintptr_t) siginfo_p->si_addr;
return 1;
}
static int
ppc_linux_stopped_by_watchpoint (void)
{
CORE_ADDR addr;
return ppc_linux_stopped_data_address (¤t_target, &addr);
}
static int
ppc_linux_watchpoint_addr_within_range (struct target_ops *target,
CORE_ADDR addr,
CORE_ADDR start, int length)
{
int mask;
if (have_ptrace_booke_interface ()
&& ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
return start <= addr && start + length >= addr;
else if (ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
mask = 3;
else
mask = 7;
addr &= ~mask;
/* Check whether [start, start+length-1] intersects [addr, addr+mask]. */
return start <= addr + mask && start + length - 1 >= addr;
}
static void
ppc_linux_store_inferior_registers (struct target_ops *ops,
struct regcache *regcache, int regno)
{
/* Overload thread id onto process id */
int tid = TIDGET (inferior_ptid);
/* No thread id, just use process id */
if (tid == 0)
tid = PIDGET (inferior_ptid);
if (regno >= 0)
store_register (regcache, tid, regno);
else
store_ppc_registers (regcache, tid);
}
/* Functions for transferring registers between a gregset_t or fpregset_t
(see sys/ucontext.h) and gdb's regcache. The word size is that used
by the ptrace interface, not the current program's ABI. eg. If a
powerpc64-linux gdb is being used to debug a powerpc32-linux app, we
read or write 64-bit gregsets. This is to suit the host libthread_db. */
void
supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp)
{
const struct regset *regset = ppc_linux_gregset (sizeof (long));
ppc_supply_gregset (regset, regcache, -1, gregsetp, sizeof (*gregsetp));
}
void
fill_gregset (const struct regcache *regcache,
gdb_gregset_t *gregsetp, int regno)
{
const struct regset *regset = ppc_linux_gregset (sizeof (long));
if (regno == -1)
memset (gregsetp, 0, sizeof (*gregsetp));
ppc_collect_gregset (regset, regcache, regno, gregsetp, sizeof (*gregsetp));
}
void
supply_fpregset (struct regcache *regcache, const gdb_fpregset_t * fpregsetp)
{
const struct regset *regset = ppc_linux_fpregset ();
ppc_supply_fpregset (regset, regcache, -1,
fpregsetp, sizeof (*fpregsetp));
}
void
fill_fpregset (const struct regcache *regcache,
gdb_fpregset_t *fpregsetp, int regno)
{
const struct regset *regset = ppc_linux_fpregset ();
ppc_collect_fpregset (regset, regcache, regno,
fpregsetp, sizeof (*fpregsetp));
}
static int
ppc_linux_target_wordsize (void)
{
int wordsize = 4;
/* Check for 64-bit inferior process. This is the case when the host is
64-bit, and in addition the top bit of the MSR register is set. */
#ifdef __powerpc64__
long msr;
int tid = TIDGET (inferior_ptid);
if (tid == 0)
tid = PIDGET (inferior_ptid);
errno = 0;
msr = (long) ptrace (PTRACE_PEEKUSER, tid, PT_MSR * 8, 0);
if (errno == 0 && msr < 0)
wordsize = 8;
#endif
return wordsize;
}
static int
ppc_linux_auxv_parse (struct target_ops *ops, gdb_byte **readptr,
gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp)
{
int sizeof_auxv_field = ppc_linux_target_wordsize ();
enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
gdb_byte *ptr = *readptr;
if (endptr == ptr)
return 0;
if (endptr - ptr < sizeof_auxv_field * 2)
return -1;
*typep = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order);
ptr += sizeof_auxv_field;
*valp = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order);
ptr += sizeof_auxv_field;
*readptr = ptr;
return 1;
}
static const struct target_desc *
ppc_linux_read_description (struct target_ops *ops)
{
int altivec = 0;
int vsx = 0;
int isa205 = 0;
int cell = 0;
int tid = TIDGET (inferior_ptid);
if (tid == 0)
tid = PIDGET (inferior_ptid);
if (have_ptrace_getsetevrregs)
{
struct gdb_evrregset_t evrregset;
if (ptrace (PTRACE_GETEVRREGS, tid, 0, &evrregset) >= 0)
return tdesc_powerpc_e500l;
/* EIO means that the PTRACE_GETEVRREGS request isn't supported.
Anything else needs to be reported. */
else if (errno != EIO)
perror_with_name (_("Unable to fetch SPE registers"));
}
if (have_ptrace_getsetvsxregs)
{
gdb_vsxregset_t vsxregset;
if (ptrace (PTRACE_GETVSXREGS, tid, 0, &vsxregset) >= 0)
vsx = 1;
/* EIO means that the PTRACE_GETVSXREGS request isn't supported.
Anything else needs to be reported. */
else if (errno != EIO)
perror_with_name (_("Unable to fetch VSX registers"));
}
if (have_ptrace_getvrregs)
{
gdb_vrregset_t vrregset;
if (ptrace (PTRACE_GETVRREGS, tid, 0, &vrregset) >= 0)
altivec = 1;
/* EIO means that the PTRACE_GETVRREGS request isn't supported.
Anything else needs to be reported. */
else if (errno != EIO)
perror_with_name (_("Unable to fetch AltiVec registers"));
}
/* Power ISA 2.05 (implemented by Power 6 and newer processors) increases
the FPSCR from 32 bits to 64 bits. Even though Power 7 supports this
ISA version, it doesn't have PPC_FEATURE_ARCH_2_05 set, only
PPC_FEATURE_ARCH_2_06. Since for now the only bits used in the higher
half of the register are for Decimal Floating Point, we check if that
feature is available to decide the size of the FPSCR. */
if (ppc_linux_get_hwcap () & PPC_FEATURE_HAS_DFP)
isa205 = 1;
if (ppc_linux_get_hwcap () & PPC_FEATURE_CELL)
cell = 1;
if (ppc_linux_target_wordsize () == 8)
{
if (cell)
return tdesc_powerpc_cell64l;
else if (vsx)
return isa205? tdesc_powerpc_isa205_vsx64l : tdesc_powerpc_vsx64l;
else if (altivec)
return isa205? tdesc_powerpc_isa205_altivec64l : tdesc_powerpc_altivec64l;
return isa205? tdesc_powerpc_isa205_64l : tdesc_powerpc_64l;
}
if (cell)
return tdesc_powerpc_cell32l;
else if (vsx)
return isa205? tdesc_powerpc_isa205_vsx32l : tdesc_powerpc_vsx32l;
else if (altivec)
return isa205? tdesc_powerpc_isa205_altivec32l : tdesc_powerpc_altivec32l;
return isa205? tdesc_powerpc_isa205_32l : tdesc_powerpc_32l;
}
void _initialize_ppc_linux_nat (void);
void
_initialize_ppc_linux_nat (void)
{
struct target_ops *t;
/* Fill in the generic GNU/Linux methods. */
t = linux_target ();
/* Add our register access methods. */
t->to_fetch_registers = ppc_linux_fetch_inferior_registers;
t->to_store_registers = ppc_linux_store_inferior_registers;
/* Add our breakpoint/watchpoint methods. */
t->to_can_use_hw_breakpoint = ppc_linux_can_use_hw_breakpoint;
t->to_insert_hw_breakpoint = ppc_linux_insert_hw_breakpoint;
t->to_remove_hw_breakpoint = ppc_linux_remove_hw_breakpoint;
t->to_region_ok_for_hw_watchpoint = ppc_linux_region_ok_for_hw_watchpoint;
t->to_insert_watchpoint = ppc_linux_insert_watchpoint;
t->to_remove_watchpoint = ppc_linux_remove_watchpoint;
t->to_stopped_by_watchpoint = ppc_linux_stopped_by_watchpoint;
t->to_stopped_data_address = ppc_linux_stopped_data_address;
t->to_watchpoint_addr_within_range = ppc_linux_watchpoint_addr_within_range;
t->to_can_accel_watchpoint_condition = ppc_linux_can_accel_watchpoint_condition;
t->to_read_description = ppc_linux_read_description;
t->to_auxv_parse = ppc_linux_auxv_parse;
observer_attach_thread_exit (ppc_linux_thread_exit);
/* Register the target. */
linux_nat_add_target (t);
linux_nat_set_new_thread (t, ppc_linux_new_thread);
}