Age | Commit message (Collapse) | Author | Files | Lines |
|
At 2974be626, frv-elf fails at the dv_sockser_install declaration in
sim/frv/tconfig.in. But, with the trivial #include's added (see other
sims tconfig.in, like cris or mn10300), it *still* fails building
sim/frv/devices.c because of a missing UART_INCHAR_ADDR. I have no
insight into what'd be a valid value, except that there's a definition
in m32r, which was probably used as a template with frv not finished.
Simulated hardware should not have been be enabled, and was indeed not
enabled by default before 94c63d78f (2013-03-23), where it seems to
have been enabled for no simulator-specific reason. Except
dv-sockser.o wasn't enabled even then: sim/frv/config.in wasn't
regenerated, so HAVE_DV_SOCKSER was never defined. Maybe people were
fooled by this in sim/frv/Makefile.in at that time (these two lines
were later deleted, in 73e76d20):
CONFIG_DEVICES = dv-sockser.o
CONFIG_DEVICES =
(As it seems people have missed it before: the second line overrides
the first...) I'm guessing these lines were part of the
never-completed hardware-support. Commit 73e76d20 attempted to move
the imagined dv-sockser.o from $(CONFIG_DEVICES) to $(frv_extra_objs)
but missed that AC_SUBST would only affect @frv_extra_objs@ (not
$(frv_extra_objs) per se) so nothing happened regarding sockser:
dv-sockser.o was not compiled and HAVE_DV_SOCKSER was not defined.
I'm removing the $(frv_extra_objs) too, to avoid confusion. The best
action seems to be disabling all hardware support by default again
until a specific sim maintainer finishes the work.
Make check-sim for frv-elf shows no failures after this.
sim/frv:
* configure.ac: Default simulator hardware to off again. Remove
dead frv_extra_objs substitution.
* configure: Regenerate.
* Makefile.in: Remove unused frv_extra_objs.
|
|
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
|
|
|
|
|
|
libtool.m4.
|
|
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
|
|
These sims have optional support for the dv-sockser model, so do not make
them hard failures. The Makefile made it seem like they didn't actually
support things dynamically, but a further code dive into the source and
the Makefile shows that things work out.
|
|
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
|
|
* configure.ac: Fail if dv-sockser.o not available.
Error when --disable-sim-hardware is specified.
* configure: Regenerated.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
sim/ChangeLog:
Update old contact info in GPL license notices.
|
|
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
condition.
* common/acinclude.m4: Define lt_cv_dlopen_libs.
* arm/configure: Regenerate.
* avr/configure: Regenerate.
* bfin/configure: Regenerate.
* common/configure: Regenerate.
* cr16/configure: Regenerate.
* cris/configure: Regenerate.
* d10v/configure: Regenerate.
* erc32/configure: Regenerate.
* frv/configure: Regenerate.
* h8300/configure: Regenerate.
* igen/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32c/configure: Regenerate.
* m32r/configure: Regenerate.
* m68hc11/configure: Regenerate.
* mcore/configure: Regenerate.
* microblaze/configure: Regenerate.
* mips/configure: Regenerate.
* mn10300/configure: Regenerate.
* moxie/configure: Regenerate.
* ppc/configure: Regenerate.
* rl78/configure: Regenerate.
* rx/configure: Regenerate.
* sh/configure: Regenerate.
* sh64/configure: Regenerate.
* testsuite/configure: Regenerate.
* v850/configure: Regenerate.
|
|
Some of the common includes in include/gdb such as callback.h
include bfd.h. But there was a recent change in bfd-in.h to
require that config.h be included before bfd.h can be included:
/* PR 14072: Ensure that config.h is included first. */
#if !defined PACKAGE && !defined PACKAGE_VERSION
#error config.h must be included before this header
#endif
PACKAGE_VERSION is always defined by default by the AC_INIT autoconf
macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro
to define it, and then regenerates all configure scripts and config.in
files.
sim/common/changeLog:
* acinclude.m4 (SIM_AC_COMMON): Define PACKAGE.
* config.in, configure: Regenerate.
sim/ChangeLog:
* configure: Regenerate.
sim/arm/ChangeLog:
* config.in, configure: Regenerate.
sim/avr/ChangeLog:
* config.in, configure: Regenerate.
sim/bfin/ChangeLog:
* config.in, configure: Regenerate.
sim/cr16/ChangeLog:
* config.in, configure: Regenerate.
sim/cris/ChangeLog:
* config.in, configure: Regenerate.
sim/d10v/ChangeLog:
* config.in, configure: Regenerate.
sim/erc32/ChangeLog:
* config.in, configure: Regenerate.
sim/frv/ChangeLog:
* config.in, configure: Regenerate.
sim/h8300/ChangeLog:
* config.in, configure: Regenerate.
sim/iq2000/ChangeLog:
* config.in, configure: Regenerate.
sim/lm32/ChangeLog:
* config.in, configure: Regenerate.
sim/m32c/ChangeLog:
* config.in, configure: Regenerate.
sim/m32r/ChangeLog:
* config.in, configure: Regenerate.
sim/m68hc11/ChangeLog:
* config.in, configure: Regenerate.
sim/mcore/ChangeLog:
* config.in, configure: Regenerate.
sim/microblaze/ChangeLog:
* config.in, configure: Regenerate.
sim/mips/ChangeLog:
* config.in, configure: Regenerate.
sim/mn10300/ChangeLog:
* config.in, configure: Regenerate.
sim/moxie/ChangeLog:
* config.in, configure: Regenerate.
sim/ppc/ChangeLog:
* configure: Regenerate.
sim/rl78/ChangeLog:
* config.in, configure: Regenerate.
sim/rx/ChangeLog:
* config.in, configure: Regenerate.
sim/sh/ChangeLog:
* config.in, configure: Regenerate.
sim/sh64/ChangeLog:
* config.in, configure: Regenerate.
sim/v850/ChangeLog:
* config.in, configure: Regenerate.
sim/testsuite/ChangeLog:
* configure: Regenerate.
|
|
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
Need to update the sim_profile_print_bar() call after the common/ changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The device_error() takes a printf style string, so update the prototype
accordingly. The message should be const and it should use an attribute.
This fixes gcc warnings like:
sim-core.c: In function 'sim_core_map_attach':
sim-core.c:200: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:237: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c: In function 'sim_core_attach':
sim-core.c:304: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:314: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:335: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:348: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
|
|
|
|
|
|
* cgen-accfp.c (fextsfdf): New arg how. All callers updated.
(ftruncdfsf, floatsisf, flostsidf, ufloatsisf, fixsfsi, fixdfsi,
ufixsfsi): Ditto.
* cgen-fpu.h (CGEN_FPCONV_KIND): New enum.
(struct cgen_fp_ops): Update signatures of floating point conversion
operations.
frv/
* sem.c: Regenerate.
sh64/
* cpu.h: Regenerate.
|
|
/:
* libtool.m4: Sync from git Libtool.
* ltmain.sh: Likewise.
* ltoptions.m4: Likewise.
* ltversion.m4: Likewise.
* lt~obsolete.m4: Likewise.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/:
* avr/configure: Regenerate.
* cris/configure: Regenerate.
* microblaze/configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
gprof/:
* Makefile.in: Regenerate.
* configure: Regenerate.
opcodes/:
* Makefile.in: Regenerate.
* configure: Regenerate.
gas/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
ld/:
* configure: Regenerate.
gdb/testsuite/:
* gdb.cell/configure: Regenerate.
binutils/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.in: Regenerate.
* configure: Regenerate.
bfd/doc/:
* Makefile.in: Regenerate.
|
|
|
|
|
|
* common/common.m4: Use AM_ZLIB to check for zlib support.
* ppc/configure.ac: Likewise.
* arm/configure, avr/configure, common/configure, cr16/configure,
cris/configure, d10v/configure, erc32/configure, frv/configure,
h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
m32r/configure, m68hc11/configure, mcore/configure,
microblaze/configure, mips/configure, mn10300/configure,
moxie/configure, ppc/configure, sh/configure, sh64/configure,
v850/configure: Regenerate.
|
|
(EXTRACT_LSB0_SINT): Renamed from EXTRACT_LSB0_INT.
plus regenerate cgen files
|
|
(EXTRACT_LSB0_LGSINT, EXTRACT_LSB0_LGUINT): Define.
(EXTRACT_FN, SEMANTIC_FN): Use CGEN_INSN_WORD in prototype
instead of CGEN_INSN_INT.
plus, cgen files: Regenerate.
|
|
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* model.c: Regenerate.
* sem.c: Regenerate.
|
|
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
|
|
readline/examples/rlfe/:
* configure.in: m4_include toplevel config/override.m4.
* configure: Regenerate.
readline/ChangeLog.gdb:
* configure.in: m4_include toplevel config/override.m4.
* configure: Regenerate.
sim/:
* configure.ac: m4_include toplevel config/override.m4.
* configure: Regenerate.
* avr/configure: Regenerate.
* cris/configure: Regenerate.
sim/common/:
* aclocal.m4: m4_include toplevel config/override.m4.
* configure: Regenerate.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/igen/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/ppc/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
|
|
in the previous copyright update.
|
|
|
|
model.c, sem.c: Regenerate.
|
|
command interpreter to use to run the input file. This is
necessary because otherwise SHELL is taken from the user's
environment, and not from the makefile that invoked this script
and the user might not be running an sh-like shell.
* cris/Makefile.in: Pass -shell parameter to genmloop.sh.
* fr30/Makefile.in: Likewise.
* frv/Makefile.in: Likewise.
* i960/Makefile.in: Likewise.
* iq2000/Makefile.in: Likewise.
* m32r/Makefile.in: Likewise.
* frv/mloop.in: Add missing start of line comment marker.
|
|
* config.in: Ditto.
|
|
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
|
|
|
|
cut_point.
|
|
to GPLv3.
|
|
|
|
|
|
* common/common.m4: Likewise.
* */configure: Regenerate.
|
|
* aclocal.m4: Use ZW_GNU_GETTEXT_SISTER_DIR.
most subdirs/
* configure: Regenerated.
|
|
config/gettext-sister.m4 instead of the old gettext.m4. Regenerate all
affected autotools files. Include intl in gdb releases again.
|
|
* cpu.c,cpu.h,decode.c,decode.h,model.c,sem.c: Regenerate.
Contribute the following changes:
2003-09-29 Dave Brolley <brolley@redhat.com>
* frv-sim.h: Use CGEN_ATTR_VALUE_ENUM_TYPE in place of
CGEN_ATTR_VALUE_TYPE.
* mloop.in: Ditto.
* pipeline.c: Ditto.
* traps.c: Ditto.
|
|
* aclocal.m4 Include ../../gettext.m4.
(CY_WITH_NLS, CY_GNU_GETTEXT, AM_PATH_PROG_WITH_TEST)
(AM_LC_MESSAGES): Remove.
* configure: Regenerate.
Regenerate all other configures.
|