summaryrefslogtreecommitdiff
path: root/gas
AgeCommit message (Collapse)AuthorFilesLines
2014-12-23Add generated files.upstream/2.25binutils-2_25upstream-2.25Tristan Gingold23-0/+57078
2014-12-23Version 2.25Tristan Gingold2-10/+14
bfd/ 2014-12-23 Tristan Gingold <gingold@adacore.com> * version.m4: Bump version to 2.25 * configure: Regenerate. binutils/ 2014-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gas/ 2014-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gprof/ 2014-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. ld/ 2014-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. opcodes/ 2014-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate.
2014-12-19Rework the alignment check for BFD_RELOC_MIPS_18_PCREL_S3.Matthew Fortune9-26/+93
gas/ * config/tc-mips.c (md_apply_fix): Apply alignment check to the symbol and offset rather than *valP for BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message for BFD_RELOC_MIPS_19_PCREL_S2. gas/testsuite/ * gas/mips/r6-64.s: Remove .align directives from LDPC instructions and add further tests for LDPC. * gas/mips/r6-64-n32.d: remove the NOPs from LDPC expected output and update for new tests. * gas/mips/r6-64-n64.d: Likewise. * gas/mips/ldpc-unalign.l: New file. * gas/mips/ldpc-unalign.s: Likewise. * gas/mips/mips.exp: Run ldpc-unalign test.
2014-12-19Add in a JALRC alias and fix the NAL instruction.Matthew Fortune5-0/+19
opcodes/ * mips-opc.c (mips_builtin_opcodes): Add JALRC alias for JIALC. Remove the operand from NAL. gas/testsuite/ * gas/mips/r6.s: Test JALRC and NAL * gas/mips/r6-n32.d: Add expected output for JALRC and NAL. * gas/mips/r6-n64.d: Likewise. * gas/mips/r6.d: Likewise.
2014-11-30Power4 should treat mftb as extended mfspr mnemonicAlan Modra3-3/+8
On further reading of ISA manual it appears gas should have been treating mftb and mftbu as extended mnemonics for mfspr, for ISA 2.03 and later. opcodes/ * ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for power4 and later. gas/testsuite/ * gas/ppc/a2.d: Update for mftb change. * gas/ppc/476.d: Likewise.
2014-11-18Add -z bndplt to generate BND prefix in PLT entriesIgor Zamyatin6-64/+58
This patch adds "-z bndplt" option Linux/x86-64 linker to generate BND prefix in PLT entries. It also updated Linux/x86-64 assembler not to generate R_X86_64_PLT32_BND nor R_X86_64_PC32_BND relocations. bfd/ 2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com> * elf64-x86-64.c (elf_x86_64_check_relocs): Enable MPX PLT only for -z bndplt. gas/ 2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com> * config/tc-i386-intel.c (i386_operator): Remove last argument from lex_got call. * config/tc-i386.c (reloc): Remove bnd_prefix from parameters' list. Return always BFD_RELOC_32_PCREL. * (output_branch): Remove condition for BFD_RELOC_X86_64_PC32_BND. * (output_jump): Update call to reloc accordingly. * (output_interseg_jump): Likewise. * (output_disp): Likewise. * (output_imm): Likewise. * (x86_cons_fix_new): Likewise. * (lex_got): Remove bnd_prefix from parameters' list in macro and declarations. Don't use BFD_RELOC_X86_64_PLT32_BND. * (x86_cons): Update call to lex_got accordingly. * (i386_immediate): Likewise. * (i386_displacement): Likewise. * (md_apply_fix): Don't use BFD_RELOC_X86_64_PLT32_BND nor BFD_RELOC_X86_64_PC32_BND. * (tc_gen_reloc): Likewise. include/ 2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com> * bfdlink.h (struct bfd_link_info): Add bndplt. ld/ 2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com> * emulparams/elf_x86_64.sh (BNDPLT): Set to yes for x86_64. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle "-z bndplt" if BNDPLT is yes. (gld${EMULATION_NAME}_list_options): Add "-z bndplt" entry. * ld.texinfo: Add description for bndplt. ld/testsuite/ 2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com> * ld-x86-64/bnd-ifunc-1.d: Add bndplt option. * ld-x86-64/bnd-ifunc-2.d: Likewise. * ld-x86-64/bnd-plt-1.d: Likewise. Update dissassembly sections. * ld-x86-64/mpx.exp: Handle mpx3 and mpx4 tests. * ld-x86-64/mpx1a.rd: Remove _BND from relocation name. * ld-x86-64/mpx1c.rd: Likewise. * ld-x86-64/mpx2a.rd: Likewise. * ld-x86-64/mpx2c.rd: Likewise. * ld-x86-64/mpx3.dd: New file. * ld-x86-64/mpx3a.s: Likewise. * ld-x86-64/mpx3b.s: Likewise. * ld-x86-64/mpx4.dd: Likewise. * ld-x86-64/mpx4a.s: Likewise. * ld-x86-64/mpx4b.s: Likewise.
2014-11-18[AArch64] Add xgene2.Philipp Tomsich3-1/+9
Conflicts: gas/doc/c-aarch64.texi
2014-11-18[AArch64] Add xgene1.Philipp Tomsich3-1/+10
The name xgene1 superceeds xgene-1. We retain support for the original xgene-1 for compatibility but drop it from documentation. Conflicts: gas/config/tc-aarch64.c
2014-11-18[AArch64] Enable CRC feature in GAS for cortex-a53 and cortex-a57.Marcus Shawcroft2-2/+10
2014-11-18Revert "[AArch64] Enable CRC feature in GAS for cortex-a53 and cortex-a57."Marcus Shawcroft2-11/+2
This reverts commit 9224a67a27a5adb4524a5d9b730045205ec04e9a.
2014-11-17Merge branch 'binutils-2_25-branch' of ssh://sourceware.org/git/binutils-gdb ↵Nick Clifton41-1/+2934
into binutils-2_25-branch Conflicts: gas/ChangeLog
2014-11-17Applies a series of patches for PR 17512 and 17533 which fix invalid memory ↵Nick Clifton2-0/+11
accesses. 2014-11-13 Nick Clifton <nickc@redhat.com> PR binutils/17512 * config/obj-coff.c (coff_obj_symbol_new_hook): Set the is_sym field. 2014-11-14 Nick Clifton <nickc@redhat.com> PR binutils/17512 * dwarf.c (get_encoded_value): Add an 'end' parameter. Change the 'data' parameter to a double pointer and return the updated value. (decode_location_expression): Update call to get_encoded_value. (frame_need_space): Handle the case where one or both of the mallocs fails. (read_cie): Initialise the cie pointer, even if the read fails. (display_debug_frames): Warn if the calculated block_end is before the start of the block. Break the loop if the CIE could not be read. Update call to get_encoded_value. Warn if the read CFA expressions are too big. 2014-11-13 Nick Clifton <nickc@redhat.com> PR binutils/17531 * readelf.c (process_version_sections): If the read of the version def information fails, make sure that the external verdef data is not used. (get_dynamic_data): Do not attempt to allocate memory for more dynamic data than there is in the file. If the read fails, free the allocated buffer. (process_symbol_table): Do not print dynamic information if we were unable to read the dynamic symbol table. (print_gnu_note): Do not print the note if the descsz is too small. 2014-11-12 Nick Clifton <nickc@redhat.com> PR binutils/17512 * dwarf.c (read_and_display_attr_value): Check that we do not read past end. (display_debug_pubnames_worker): Add range checks. (process_debug_info): Check for invalid pointer sizes. (display_loc_list): Likewise. (display_loc_list_dwo): Likewise. (display_debug_ranges): Likewise. (display_debug_aranges): Check for invalid address size. (read_cie): Add range checks. Replace call strchr with while loop. * objdump.c (dump_dwarf): Replace abort with a warning message. (print_section_stabs): Improve range checks. * rdcoff.c (coff_get_slot): Use long for indx parameter type. Add check for an excesively large index. * rddbg.c (read_section_stabs_debugging_info): Zero terminate the string table. Avoid walking off the end of the stabs data. * stabs.c (parse_stab_string): Add check for a NULL name. 2014-11-11 Nick Clifton <nickc@redhat.com> PR binutils/17531 * binutils/readelf.c (dynamic_nent): Change type to size_t. (slurp_rela_relocs): Use size_t type for nrelas. (slurp_rel_relocs): Likewise. (get_program_headers): Improve out of memory error message. (get_32bit_section_headers): Likewise. (get_32bit_section_headers): Likewise. (get_64bit_section_headers): Likewise. (get_32bit_elf_symbols): Likewise. (get_64bit_elf_symbols): Likewise. (process_section_groups): Likewise. (get_32bit_dynamic_section): Likewise. (get_64bit_dynamic_section): Likewise. (process_dynamic_section): Likewise. (process_version_sections): Likewise. (get_symbol_index_type): Likewise. (process_mips_specific): Likewise. (process_corefile_note_segment): Likewise. (process_version_sections): Use size_t type for total. (get_dynamic_data): Change type of number parameter to size_t. Improve out of memory error messages. (process_symbol_table): Change type of nbuckets and nchains to size_t. Skip processing of sections headers if there are none. Improve out of memory error messages. 2014-11-11 Nick Clifton <nickc@redhat.com> PR binutils/17531 * readelf.c (display_arm_attribute): Avoid reading off the end of the buffer when processing a Tag_nodefaults. 2014-11-10 Nick Clifton <nickc@redhat.com> PR binutils/17531 * readelf.c (ia64_process_unwind): Replace assertion with an error message. Add range checking for group section indicies. (hppa_process_unwind): Replace assertion with an error message. (process_syminfo): Likewise. (decode_arm_unwind_bytecode): Add range checking. (dump_section_as_strings): Add more string range checking. (display_tag_value): Likewise. (display_arm_attribute): Likewise. (display_gnu_attribute): Likewise. (display_tic6x_attribute): Likewise. (display_msp430x_attribute): Likewise. 2014-11-10 Nick Clifton <nickc@redhat.com> PR binutils/17552 * objcopy.c (copy_archive): Clean up temporary files even if an error occurs. 2014-11-07 Nick Clifton <nickc@redhat.com> PR binutils/17531 * readelf.c (get_data): Avoid allocating memory when we know that the read will fail. (find_section_by_type): New function. (get_unwind_section_word): Check for invalid symbol indicies. Check for invalid reloc types. (get_32bit_dynamic_section): Add range checks. (get_64bit_dynamic_section): Add range checks. (process_dynamic_section): Check for a corrupt time value. (process_symbol_table): Add range checks. (dump_section_as_strings): Add string length range checks. (display_tag_value): Likewise. (display_arm_attribute): Likewise. (display_gnu_attribute): Likewise. (display_tic6x_attribute): Likewise. (display_msp430x_attribute): Likewise. (process_mips_specific): Add range check. 2014-11-06 Nick Clifton <nickc@redhat.com> PR binutils/17552, binutils/17533 * bucomm.c (is_valid_archive_path): New function. Returns false for absolute pathnames and pathnames that include /../. * bucomm.h (is_valid_archive_path): Add prototype. * ar.c (extract_file): Use new function to check for valid pathnames when extracting files from an archive. * objcopy.c (copy_archive): Likewise. * doc/binutils.texi: Update documentation to mention the limitation on pathname of archive members. 2014-11-05 Nick Clifton <nickc@redhat.com> PR binutils/17531 * readelf.c (printable_section_name): New function. (printable_section_name_from_index): New function. (dump_relocations): Use new function. (process_program_headers, get_32bit_elf_symbols, (get_64bit_elf_symbols, process_section_headers, (process_section_groups, process_relocs, ia64_process_unwind, (hppa_process_unwind, get_unwind_section_word, decode_arm_unwind, (arm_process_unwind, process_version_sections, (process_symbol_table, apply_relocations, get_section_contents, (dump_section_as_strings, dump_section_as_bytes, (display_debug_section, process_attributes, process_mips_specific, (process_mips_specific process_gnu_liblist): Likewise. (get_unwind_section_word): Check for a missing symbol table. Replace aborts with error messages. (arm_process_unwind): Check for a missing string table. (process_attributes): Check for an attribute length that is too small. (process_mips_specific): Check for a corrupt GOT symbol offset. 2014-11-05 Nick Clifton <nickc@redhat.com> PR binutils/17533 * bucomm.c (is_valid_archive_path): New function. * bucomm.h (is_valid_archive_path): Prototype it. * ar.c (extract_file): Call is_valid_archive_path to verify a member filename before extracting it. * objcopy.c (copy_archive): Likewise. 2014-11-04 Nick Clifton <nickc@redhat.com> PR binutils/17531 * readelf.c (get_data): If the reason parameter is null, do not print any error messages. (get_32bit_section_headers): Verify section header entry size before reading in the section headers. (get_64bit_section_headers): Likewise. (process_section_headers): Pass FALSE to get_section_headers. (get_file_header): Pass TRUE to get_section_headers. (process_dynamic_section): Change an assert to an error message. (process_symbol_table): Handle corrupt histograms. (get_32bit_program_headers): Verify program header entry size before reading in the program headers. (get_64bit_program_headers): Likewise. (get_unwind_section_word): Do nothing if no section was provided. Fail if the offset is outside of the section. (print_dynamic_symbol): Catch out of range symbol indicies. (process_mips_specific): Likewise. (process_attributes): Make sure that there is enough space left in the section before attempting to read the length of the next attribute. 2014-11-03 Nick Clifton <nickc@redhat.com> PR binutils/17512 * objdump.c (slurp_symtab): Fail gracefully if the table could not be read. (dump_relocs_in_section): Likewise. 2014-11-14 Nick Clifton <nickc@redhat.com> PR binutils/17597 * opncls.c (bfd_get_debug_link_info): Avoid reading off the end of the section. (bfd_get_alt_debug_link_info): Likewise. 2014-11-14 Nick Clifton <nickc@redhat.com> PR binutils/17512 * ieee.c (ieee_archive_p) Skip processing if no bytes are read at all. (ieee_object_p): Likewise. 2014-11-13 H.J. Lu <hongjiu.lu@intel.com> * coffcode.h (coff_slurp_line_table): Add cast to unsigned int. 2014-11-13 H.J. Lu <hongjiu.lu@intel.com> * coffcode.h (coff_pointerize_aux_hook): Fix a typo. 2014-11-13 Nick Clifton <nickc@redhat.com> PR binutils/17512 * coffcode.h (coff_ptr_struct): Add is_sym field. (coff_new_section_hook): Set the is_sym field. (coff_pointerize_aux_hook): Check the is_sym field. (coff_print_aux): Likewise. (coff_compute_section_file_positions): Likewise. (coff_write_object_contents): Likewise. (coff_slurp_line_table): Likewise. (coff_slurp_symbol_table): Likewise. (CALC_ADDEND): Likewise. * coffgen.c (coff_renumber_symbols): Likewise. (coff_mangle_symbols): Likewise. (coff_fix_symbol_name): Likewise. (coff_write_symbol): Likewise. (coff_write_alien_symbol): Likewise. (coff_write_native_symbol): Likewise. (coff_write_symbols): Likewise. (coff_write_linenumbers): Likewise. (coff_pointerize_aux): Likewise. (coff_get_normalized_symtab): Likewise. (coff_get_symbol_info): Likewise. (bfd_coff_get_syment): Likewise. (bfd_coff_get_auxent): Likewise. (coff_print_symbol): Likewise. (coff_find_nearest_line_with_names): Likewise. (bfd_coff_set_symbol_class): Likewise. (coff_make_empty_symbol): Set the is_sym field. (coff_bfd_make_debug_symbol): Likewise. * peicode.h (pe_ILF_make_a_symbol): Likewise. * libcoff.h: Regenerate. * libcoff-in.h: Regenerate. 2014-11-12 Nick Clifton <nickc@redhat.com> PR binutils/17512 * coffcode.h (coff_slurp_line_table): Set the line number of corrupt entries to -1. (coff_slurp_symbol_table): Alway initialise the value of the symbol. * coffgen.c (coff_print_symbol): Check that the combined pointer is valid. (coff_print_symbol): Do not print negative line numbers. * peXXigen.c (pe_print_idata): Add range checking displaying member names. 2014-11-12 Alan Modra <amodra@gmail.com> PR binutils/17512 * coffcode.h (coff_slurp_line_table): Drop line number info not preceded by a valid function entry. Revert last change. 2014-11-11 Nick Clifton <nickc@redhat.com> PR binutils/17512 * coffcode.h (coff_slurp_line_table): Initialise the parts of the line number cache that would not be initialised by the copy from the new line number table. (coff_classify_symbol): Allow for _bfd_coff_internal_syment_name returning NULL. * coffgen.c (coff_get_normalized_symbols): Get the external symbols before allocating space for the internal symbols, in case the get fails. * elf.c (_bfd_elf_slurp_version_tables): Only allocate a verref array if one is needed. Likewise with the verdef array. * peXXigen.c (_bfd_XXi_swap_sym_in): Replace abort()'s with error messages. (_bfd_XXi_swap_aux_in): Make sure that all fields of the aux structure are initialised. (pe_print_edata): Avoid reading off the end of the data buffer. 2014-11-11 Alan Modra <amodra@gmail.com> PR binutils/17512 * coffcode.h (coff_slurp_line_table): Use updated lineno_count when building func_table. 2014-11-11 Alan Modra <amodra@gmail.com> PR binutils/17512 * coffcode.h (coff_slurp_line_table): Don't bfd_zalloc, just memset the particular bits we need. Update src after hitting loop "continue". Don't count lineno omitted due to invalid symbols in nbr_func, and update lineno_count. Init entire terminating lineno. Don't both allocating terminator in n_lineno_cache. Redirect sym->lineno pointer to where n_lineno_cache will be copied, and free n_lineno_cache. * pe-mips.c (NUM_HOWTOS): Typo fix. 2014-11-10 Nick Clifton <nickc@redhat.com> PR binutils/17521 * coff-i386.c (NUM_HOWTOS): New define. (RTYPE2HOWTO): Use it. (coff_i386_rtype_to_howto): Likewise. (coff_i386_reloc_name_lookup): Likewise. (CALC_ADDEND): Check that reloc r_type field is valid. * coff-x86_64.c (NUM_HOWTOS): New define. (RTYPE2HOWTO): Use it. (coff_amd64_rtype_to_howto): Likewise. (coff_amd64_reloc_name_lookup): Likewise. (CALC_ADDEND): Check that reloc r_type field is valid. * coffcode.h (coff_slurp_line_table): Check for symbol table indexing underflow. (coff_slurp_symbol_table): Use zalloc to ensure that all table entries are initialised. * coffgen.c (_bfd_coff_read_string_table): Initialise unused bits in the string table. Also ensure that the table is 0 terminated. (coff_get_normalized_symtab): Check for symbol table indexing underflow. * opncls.c (bfd_alloc): Catch the case where a small negative size can result in only 1 byte being allocated. (bfd_alloc2): Use bfd_alloc. * pe-mips.c (NUM_HOWTOS): New define. (coff_mips_reloc_name_lookup): Use it. (CALC_ADDEND): Check that reloc r_type field is valid. * peXXigen.c (_bfd_XXi_swap_aouthdr_in): Initialise unused entries in the DataDirectory. (pe_print_idata): Avoid reading beyond the end of the data block wen printing strings. (pe_print_edata): Likewise. Check for table indexing underflow. * peicode.h (pe_mkobject): Initialise the pe_opthdr field. (pe_bfd_object_p): Allocate and initialize enough space to hold a PEAOUTHDR, even if the opt_hdr field specified less. 2014-11-08 Alan Modra <amodra@gmail.com> * peXXigen.c (pe_print_idata): Revert last patch, cast lhs instead. 2014-11-07 H.J. Lu <hongjiu.lu@intel.com> * peXXigen.c (pe_print_idata): Cast to unsigned long in range checks. 2014-11-07 Alan Modra <amodra@gmail.com> * tekhex.c (tekhex_set_arch_mach): Ignore unknown arch errors. 2014-11-07 Alan Modra <amodra@gmail.com> * tekhex.c (CHUNK_SPAN): Define. (struct data_struct <chunk_init>): Use one byte per span, update all code accessing this field. (find_chunk): Add create param, don't create new entry unless set. (insert_byte): Don't save zeros. (first_phase): Set section SEC_CODE or SEC_DATA flag depending on symbol type. Create an alternate section if both types of symbol are given. Attach type '2' and '6' symbols to absolute section. (move_section_contents): Fix caching of chunk. Don't create chunk when reading, or for writing zeros. (tekhex_set_section_contents): Don't create initial chunks. (tekhex_write_object_contents): Use CHUNK_SPAN. 2014-11-07 Alan Modra <amodra@gmail.com> * aoutx.h (aout_get_external_symbols): Tidy allocation of symbol buffer. 2014-11-07 Alan Modra <amodra@gmail.com> * archive.c (_bfd_slurp_extended_name_table): Revert bfd_get_size check. * coffcode.h (coff_set_alignment_hook): Likewise. (coff_slurp_line_table): Likewise. * coffgen.c (coff_get_normalized_symtab): Likewise. (_bfd_coff_get_external_symbols): Likewise. * elf.c (bfd_elf_get_str_section): Likewise. * tekhex.c (first_phase): Likewise. 2014-11-06 Nick Clifton <nickc@redhat.com> * aoutx.h (slurp_symbol_table): Revert previous delta. (slurp_reloc_table): Likewise. * compress.c (bfd_get_full_section_contents): Remove file size test. * coffgen.c (coff_get_normalized_symtab): Allow zero-sized symtabs and do not complain about linker generated files. 2014-11-04 Nick Clifton <nickc@redhat.com> PR binutils/17512 * coffcode.h (handle_COMDAT): Replace abort with BFD_ASSERT. Replace another abort with an error message. (coff_slurp_line_table): Add more range checking. * peXXigen.c (pe_print_debugdata): Add range checking. 2014-11-05 Nick Clifton <nickc@redhat.com> PR binutils/17512 * coffcode.h (coff_set_alignment_hook): Warn if the file lies about the number of relocations it contains. (coff_sort_func_alent): Return 0 if the pointers are NULL. (coff_slurp_line_table): Add more range checks. Do not free new tables created when sorting line numbers. * peXXigen.c (pe_print_idata): Add range checks. (pe_print_edata): Likewise. (rsrc_print_resource_entries): Likewise. Avoid printing control characters. Terminate priniting if corruption is detected. (rsrc_print_resource_directory): Terminate printing if an unknown directory type is encountered. (pe_print_debugdata): Fix off-by-one error. (rsrc_count_entries): Add range checking. (rsrc_parse_entry): Likewise. 2014-11-04 Nick Clifton <nickc@redhat.com> PR binutils/17512 * compress.c (bfd_get_full_section_contents): Improve test for linker created objects. PR binutils/17533 * archive.c (_bfd_slurp_extended_name_table): Handle archives with corrupt extended name tables. 2014-11-03 Nick Clifton <nickc@redhat.com> PR binutils/17512 * aoutx.h (slurp_symbol_table): Check that computed table size is not bigger than the file from which is it being read. (slurp_reloc_table): Likewise. * coffcode.h (coff_slurp_line_table): Remove unneeded local 'warned'. Do not try to print the details of a symbol with an invalid index. * coffgen.c (make_a_sectiobn_from_file): Check computed string index against length of string table. (bfd_coff_internal_syment_name): Check read in string offset against length of string table. (build_debug_section): Return a pointer to the section used. (_bfd_coff_read_string_table): Store the length of the string table in the coff_tdata structure. (bfd_coff_free_symbols): Set the length of the string table to zero when it is freed. (coff_get_normalized_symtab): Check offsets against string table or data table lengths as appropriate. * cofflink.c (_bfd_coff_link_input_bfd): Check offset against length of string table. * compress.c (bfd_get_full_section_contents): Check computed size against the size of the file. * libcoff-in.h (obj_coff_strings_len): Define. (struct coff_tdata): Add strings_len field. * libcoff.h: Regenerate. * peXXigen.c (pe_print_debugdata): Do not attempt to print the data if the debug section is too small. * xcofflink.c (xcoff_link_input_bfd): Check offset against length of string table. 2014-10-31 Nick Clifton <nickc@redhat.com> PR binutils/17512 * coffgen.c (_bfd_coff_get_external_symbols): Do not try to load a symbol table bigger than the file. * elf.c (bfd_elf_get_str_section): Do not try to load a string table bigger than the file. * tekhex.c (first_phase): Check that the section range is sane.
2014-11-17Add AVX512VBMI instructionsIlya Tocar17-1/+1585
gas/ * config/tc-i386.c (cpu_arch): Add .avx512vbmi. * doc/c-i386.texi: Document it. opcodes/ * i386-dis-evex.c (evex_table): Add vpermi2b, vpermt2b, vpermb, vpmultishiftqb. * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F3883, EVEX_W_0F3883_P_2. * i386-gen.c (cpu_flag_init): Add CPU_AVX512VBMI_FLAGS. (cpu_flags): Add CpuAVX512VBMI. * i386-opc.h (enum): Add CpuAVX512VBMI. (i386_cpu_flags): Add cpuavx512vbmi. * i386-opc.tbl: Add vpmadd52luq, vpmultishiftqb, vpermb, vpermi2b, vpermt2b. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. /gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/avx512vbmi-intel.d: New file. * gas/i386/avx512vbmi.d: Likewise. * gas/i386/avx512vbmi.s: Likewise. * gas/i386/avx512vbmi_vl-intel.d: Likewise. * gas/i386/avx512vbmi_vl.d: Likewise. * gas/i386/avx512vbmi_vl.s: Likewise. * gas/i386/x86-64-avx512vbmi-intel.d: Likewise. * gas/i386/x86-64-avx512vbmi.d: Likewise. * gas/i386/x86-64-avx512vbmi.s: Likewise. * gas/i386/x86-64-avx512vbmi_vl-intel.d: Likewise. * gas/i386/x86-64-avx512vbmi_vl.d: Likewise. * gas/i386/x86-64-avx512vbmi_vl.s: Likewise.
2014-11-17Add AVX512IFMA instructionsIlya Tocar17-1/+1141
gas/ * config/tc-i386.c (cpu_arch): Add .avx512ifma. * doc/c-i386.texi: Document it. opcodes/ * i386-dis-evex.c (evex_table): Add vpmadd52luq, vpmadd52huq. * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F38B4, PREFIX_EVEX_0F38B5. * i386-gen.c (cpu_flag_init): Add CPU_AVX512IFMA_FLAGS. (cpu_flags): Add CpuAVX512IFMA. * i386-opc.h (enum): Add CpuAVX512IFMA. (i386_cpu_flags): Add cpuavx512ifma. * i386-opc.tbl: Add vpmadd52huq, vpmadd52luq. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. /gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/avx512ifma-intel.d: New file. * gas/i386/avx512ifma.d: Likewise. * gas/i386/avx512ifma.s: Likewise. * gas/i386/avx512ifma_vl-intel.d: Likewise. * gas/i386/avx512ifma_vl.d: Likewise. * gas/i386/avx512ifma_vl.s: Likewise. * gas/i386/x86-64-avx512ifma-intel.d: Likewise. * gas/i386/x86-64-avx512ifma.d: Likewise. * gas/i386/x86-64-avx512ifma.s: Likewise. * gas/i386/x86-64-avx512ifma_vl-intel.d: Likewise. * gas/i386/x86-64-avx512ifma_vl.d: Likewise. * gas/i386/x86-64-avx512ifma_vl.s: Likewise.
2014-11-17Add pcommit instructionIlya Tocar11-1/+99
gas/ * config/tc-i386.c (cpu_arch): Add .pcommit. * doc/c-i386.texi: Document it. /opcodes * i386-dis.c (PREFIX enum): Add PREFIX_RM_0_0FAE_REG_7. (prefix_table): Add pcommit. * i386-gen.c (cpu_flag_init): Add CPU_PCOMMIT_FLAGS. (cpu_flags): Add CpuPCOMMIT. * i386-opc.h (enum): Add CpuPCOMMIT. (i386_cpu_flags): Add cpupcommit. * i386-opc.tbl: Add pcommit. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. /gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/pcommit-intel.d: New file. * gas/i386/pcommit.d: Likewise. * gas/i386/pcommit.s: Likewise. * gas/i386/x86-64-pcommit-intel.d: Likewise. * gas/i386/x86-64-pcommit.d: Likewise. * gas/i386/x86-64-pcommit.s: Likewise.
2014-11-17Add clwb instructionIlya Tocar11-0/+111
gas/ * config/tc-i386.c (cpu_arch): Add .clwb. * doc/c-i386.texi: Document it. opcodes/ * i386-dis.c (PREFIX enum): Add PREFIX_0FAE_REG_6. (prefix_table): Add clwb. * i386-gen.c (cpu_flag_init): Add CPU_CLWB_FLAGS. (cpu_flags): Add CpuCLWB. * i386-opc.h (enum): Add CpuCLWB. (i386_cpu_flags): Add cpuclwb. * i386-opc.tbl: Add clwb. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/clwb-intel.d: New file. * gas/i386/clwb.d: Likewise. * gas/i386/clwb.s: Likewise. * gas/i386/x86-64-clwb-intel.d: Likewise. * gas/i386/x86-64-clwb.d: Likewise. * gas/i386/x86-64-clwb.s: Likewise.
2014-11-14Correct x86 assembler manualH.J. Lu3-23/+30
* config/tc-i386.c (cpu_arch): Re-arrange avx512* and xsave* items. * doc/c-i386.texi: Re-arrange avx512* and xsave*. Add clflushopt and se1. Remove duplicated entries.
2014-11-14[AArch64] Enable CRC feature in GAS for cortex-a53 and cortex-a57.Marcus Shawcroft2-2/+11
Conflicts: gas/config/tc-aarch64.c
2014-11-12Fix x86 non-ELF build breakageAlan Modra2-0/+8
PR ld/17482 * config/tc-i386.c (output_insn): Don't test x86_elf_abi when not ELF.
2014-11-11Update French and Ukranian translations with new one supplied by the ↵Nick Clifton2-109/+144
Translation Project. * po/fr.po: Updated French translation. * po/uk.po: Updated Ukranian translation.
2014-11-10Update .MIPS.abiflags to support MIPS R6Matthew Fortune6-0/+65
Backport from trunk. bfd/ * elfxx-mips.c (update_mips_abiflags_isa): Add E_MIPS_ARCH_32R6 and E_MIPS_ARCH_64R6 support. ld/testsuite/ * ld-mips-elf/abiflags-strip10-ph.d: New file. * ld-mips-elf/mips-eld.exp: Run the new test. gas/ * config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6 and INSN_ISA64R6 support. gas/testsuite/ * gas/mips/elf_arch_mips32r6.d: New file. * gas/mips/elf_arch_mips64r6.d: New file. * gas/mips/mips.exp: Run the new tests.
2014-11-07X32: Add REX prefix to encode R_X86_64_GOTTPOFFH.J. Lu5-0/+53
Structions with R_X86_64_GOTTPOFF relocation must be encoded with REX prefix even if it isn't required by destination register. Otherwise linker can't safely perform IE -> LE optimization. bfd/ PR ld/17482 * elf64-x86-64.c (elf_x86_64_relocate_section): Update comments for IE->LE transition. gas/ PR ld/17482 * config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix for structions with R_X86_64_GOTTPOFF relocation for x32 if needed. gas/testsuite/ PR ld/17482 * gas/i386/ilp32/x32-tls.d: New file. * gas/i386/ilp32/x32-tls.s: Likewise. ld/testsuite/ PR ld/17482 * ld-x86-64/tlsie4.dd: Updated.
2014-11-03Fixes a snafu checking the size of a 20-bit immediate.Nick Clifton2-2/+8
* config/tc-msp430.c (msp430_srcoperand): Fix range test for 20-bit values.
2014-10-30Remove the artificial limit on code alignment through the use of theDr Philipp Tomsich3-46/+38
fixed part of a fragment for output generation only, which required MAX_MEM_FOR_RS_ALIGN_CODE to be large enough to hold the maximum pad. * config/tc-aarch64.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define to 7. * config/tc-aarch64.c (aarch64_handle_align): Rewrite to handle large alignments with a constant fragment size of MAX_MEM_FOR_RS_ALIGN_CODE.
2014-10-29Updated and New translations from the Translation Project.Nick Clifton2-0/+19698
2014-10-28MIPS Documentation fixesMatthew Fortune3-10/+28
Import from trunk. gas/ * doc/as.texinfo: Update the MIPS FP ABI descriptions. * doc/c-mips.texi: Spell check and correct throughout.
2014-10-28MIPS/GAS: Correct file option settings with `.insn'Maciej W. Rozycki6-0/+60
Import from trunk. This makes sure `HAVE_CODE_COMPRESSION' evaluates correctly when the `.insn' directive is used at the beginning of a source file before any instructions have been produced and that ELF file header's MIPS16 and microMIPS ASE flags are set correctly in the case where no instructions have been produced other than with the said directive. gas/ * config/tc-mips.c (s_insn): Set file options. gas/testsuite/ * gas/mips/insn-opts.d: New test. * gas/mips/insn-opts.s: New test source. * gas/mips/mips.exp: Run the new test.
2014-10-28Fix bad @value references in MIPS documentationMatthew Fortune2-2/+7
Import from trunk. gas/ * doc/c-mips.texi: Fix bad @value references.
2014-10-28ppc: enable msgclr and msgsnd on Power8Jan Beulich3-0/+8
According to my reading of the spec it was an oversight for them to not having got enabled when Power8 support got added.
2014-10-28Fix PR17493, attempted output of *GAS `reg' section* symbolAlan Modra5-8/+22
The write.c change is to make gas report an error if reg_section symbols should leak in future. The tc-i386.c change is the real fix. Note that the error isn't the most helpful, "redefined symbol cannot be used on reloc", but I'm not inclined to improve what is really an internal gas error. reg_section symbols shouldn't leak.. gas/ PR 17493 * write.c (adjust_reloc_syms): Don't allow symbols in reg_section to be reduced to reg_section section symbol. * gas/config/tc-i386.c (i386_finalize_immediate): Reject all reg_section immediates. gas/testsuite/ * gas/i386/inval-equ-2.l: Adjust.
2014-10-28ChangeLog typo fixAlan Modra1-1/+1
2014-10-28Fix memory overflow issue about strncatChen Gang2-1/+7
If src contains n or more bytes, strncat() writes n+1 bytes to dest (n from src plus the terminating null byte). Therefore, the size of dest must be at least strlen(dest)+n+1. * config/tc-tic4x.c (md_assemble): Correct strncat size.
2014-10-15Regenerate configure (after change of version)Tristan Gingold2-10/+14
binutils/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gas/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. ld/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. opcodes/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate.
2014-10-14Add NEWS markers for 2.25.Tristan Gingold2-0/+6
binutils/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. gas/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. ld/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25.
2014-10-14Avoid undefined behaviour with signed expressionsAlan Modra5-16/+26
PR 17453 bfd/ * libbfd.c (COERCE16, COERCE32, COERCE64): Use unsigned types. (EIGHT_GAZILLION): Delete. binutils/ * dwarf.c (read_leb128): Avoid signed overflow. (read_debug_line_header): Likewise. gas/ * config/tc-i386.c (fits_in_signed_long): Use unsigned param and expression to avoid signed overflow. (fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word, fits_in_signed_word, fits_in_unsigned_long): Similarly. * expr.c (operand <'-'>): Avoid signed overflow. * read.c (s_comm_internal): Likewise.
2014-10-14sparc-aout and sparc-coff breakageAlan Modra2-1/+7
* config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.
2014-10-09This is a series of patches that add support for the SPARC M7 cpu toJose E. Marchesi15-66/+522
binutils. They were discussed and approved here: https://sourceware.org/ml/binutils/2014-10/msg00038.html
2014-09-292014-09-29 Terry Guo <terry.guo@arm.com>Terry Guo3-73/+88
* as.c (create_obj_attrs_section): Move it and call it from ... * write.c (create_obj_attrs_section): ... here. (subsegs_finish_section): Refactored.
2014-09-27Do away with hash table line lookup in dwarf2dbg.cAlan Modra7-18/+39
Hash lookup is silly when we can attach the line table info directly to sections instead. Worse, hash lookup fails when we have multiple sections with the same name. gas/ * dwarf2dbg.c (all_segs_hash): Delete. (get_line_subseg): Delete last_seg, last_subseg, last_line_subseg. Retrieve line_seg for section via seg_info. * subsegs.h (segment_info_typet): Add dwarf2_line_seg. gas/testsuite/ * gas/elf/group2.d, * gas/elf/group2.s: New test. * gas/elf/elf.exp: Run it.
2014-09-23Disallow VEX/EVEX encoded instructions in 16-bit modeH.J. Lu6-4/+57
gas/ PR gas/17421 * config/tc-i386.c (md_assemble): Disallow VEX/EVEX encoded instructions in 16-bit mode. gas/testsuite/ PR gas/17421 * gas/i386/i386.exp: Run inval-16. * gas/i386/inval-16.l: New file. * gas/i386/inval-16.s: Likewise.
2014-09-22Ignore MOD field for control/debug register moveH.J. Lu5-0/+51
This patch ignores the MOD field in control/debug register move instructions. gas/testsuite/ * gas/i386/cdr.d: New file. * gas/i386/cdr.s: Likewise. * gas/i386/x86-64-cdr.d: Likewise. * gas/i386/i386.exp: Run cdr and x86-64-cdr. opcodes/ * i386-dis.c (MOD_0F20): Removed. (MOD_0F21): Likewise. (MOD_0F22): Likewise. (MOD_0F23): Likewise. (dis386_twobyte): Replace MOD_0F20, MOD_0F21, MOD_0F22 and MOD_0F23 with "movZ". (mod_table): Remove MOD_0F20, MOD_0F21, MOD_0F22 and MOD_0F23. (OP_R): Check mod/rm byte and call OP_E_register.
2014-09-22Fix various warnings seen when using gcc-5.0Alan Modra4-3/+11
* config/tc-m68k.c (md_assemble): Add assert to work around bogus trunk gcc warning. * config/tc-pj.h (md_convert_frag): Warning fix. * config/tc-xtensa.c (xg_assemble_vliw_tokens): Warning fix.
2014-09-17Fix arm-elf build failure on non-C99 systems (was using int64_t)Tristan Gingold2-2/+7
gas/ * config/tc-arm.c (move_or_literal_pool, add_to_lit_pool): Use bfd_int64_t instead of int64_t.
2014-09-16Add -mevexrcig={rne|rd|ru|rz} option to x86 assembler.Ilya Tocar59-1/+7718
It is used to control which value is encoded in rounding control bits for SAE-only EVEX instructions. gas/ * config/tc-i386.c (evexrcig): New. (build_evex_prefix): Force rounding bits. (OPTION_MEVEXRCIG): New. (md_longopts): Add mevexrcig. (md_parse_option): Handle OPTION_MEVEXRCIG. (md_show_usage): Document mevexrcig. * doc/c-i386.texi (mevexrcig): Document new option. gas/testsuite/ * gas/i386/avx512dq-rcig.s: New. * gas/i386/avx512dq-rcigrd-intel.d: Likewise. * gas/i386/avx512dq-rcigrd.d: Likewise. * gas/i386/avx512dq-rcigrne-intel.d: Likewise. * gas/i386/avx512dq-rcigrne.d: Likewise. * gas/i386/avx512dq-rcigru-intel.d: Likewise. * gas/i386/avx512dq-rcigru.d: Likewise. * gas/i386/avx512dq-rcigrz-intel.d: Likewise. * gas/i386/avx512dq-rcigrz.d: Likewise. * gas/i386/avx512er-rcig.s: Likewise. * gas/i386/avx512er-rcigrd-intel.d: Likewise. * gas/i386/avx512er-rcigrd.d: Likewise. * gas/i386/avx512er-rcigrne-intel.d: Likewise. * gas/i386/avx512er-rcigrne.d: Likewise. * gas/i386/avx512er-rcigru-intel.d: Likewise. * gas/i386/avx512er-rcigru.d: Likewise. * gas/i386/avx512er-rcigrz-intel.d: Likewise. * gas/i386/avx512er-rcigrz.d: Likewise. * gas/i386/avx512f-rcig.s: Likewise. * gas/i386/avx512f-rcigrd-intel.d: Likewise. * gas/i386/avx512f-rcigrd.d: Likewise. * gas/i386/avx512f-rcigrne-intel.d: Likewise. * gas/i386/avx512f-rcigrne.d: Likewise. * gas/i386/avx512f-rcigru-intel.d: Likewise. * gas/i386/avx512f-rcigru.d: Likewise. * gas/i386/avx512f-rcigrz-intel.d: Likewise. * gas/i386/avx512f-rcigrz.d: Likewise. * gas/i386/x86-64-avx512dq-rcig.s: Likewise. * gas/i386/x86-64-avx512dq-rcigrd-intel.d: Likewise. * gas/i386/x86-64-avx512dq-rcigrd.d: Likewise. * gas/i386/x86-64-avx512dq-rcigrne-intel.d: Likewise. * gas/i386/x86-64-avx512dq-rcigrne.d: Likewise. * gas/i386/x86-64-avx512dq-rcigru-intel.d: Likewise. * gas/i386/x86-64-avx512dq-rcigru.d: Likewise. * gas/i386/x86-64-avx512dq-rcigrz-intel.d: Likewise. * gas/i386/x86-64-avx512dq-rcigrz.d: Likewise. * gas/i386/x86-64-avx512er-rcig.s: Likewise. * gas/i386/x86-64-avx512er-rcigrd-intel.d: Likewise. * gas/i386/x86-64-avx512er-rcigrd.d: Likewise. * gas/i386/x86-64-avx512er-rcigrne-intel.d: Likewise. * gas/i386/x86-64-avx512er-rcigrne.d: Likewise. * gas/i386/x86-64-avx512er-rcigru-intel.d: Likewise. * gas/i386/x86-64-avx512er-rcigru.d: Likewise. * gas/i386/x86-64-avx512er-rcigrz-intel.d: Likewise. * gas/i386/x86-64-avx512er-rcigrz.d: Likewise. * gas/i386/x86-64-avx512f-rcig.s: Likewise. * gas/i386/x86-64-avx512f-rcigrd-intel.d: Likewise. * gas/i386/x86-64-avx512f-rcigrd.d: Likewise. * gas/i386/x86-64-avx512f-rcigrne-intel.d: Likewise. * gas/i386/x86-64-avx512f-rcigrne.d: Likewise. * gas/i386/x86-64-avx512f-rcigru-intel.d: Likewise. * gas/i386/x86-64-avx512f-rcigru.d: Likewise. * gas/i386/x86-64-avx512f-rcigrz-intel.d: Likewise. * gas/i386/x86-64-avx512f-rcigrz.d: Likewise. * gas/i386/i386.exp: Run new tests.
2014-09-16NDS32: Code refactoring of relaxation.Kuan-Lin Chen3-1289/+2003
Refactor each relaxation pattern to raise the maintainability. In origin, all patterns is analysed in nds32_elf_relax_section, so it is hard to debug and maintain. Therefore, we classify all patterns into different functions in this patch. Moreover, we adjust all optimizations into nds32_elf_relax_section to take these optimizations in turn. This can promise all relaxation being done after calling gld${EMULATION_NAME}_after_allocation.
2014-09-15Rename OPTION_omit_lock_prefix to OPTION_OMIT_LOCK_PREFIXH.J. Lu2-3/+10
* config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ... (OPTION_OMIT_LOCK_PREFIX): This. (md_longopts): Updated. (md_parse_option): Likewise.
2014-09-15Add support for MIPS R6.Andrew Bennett82-100/+6826
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-09-15Ensure softfloat and singlefloat take precedence in consistency checksMatthew Fortune12-22/+45
gas/ * tc-mips.c (check_fpabi): Move softfloat and singlefloat checks higher. gas/testsuite/ * gas/mips/attr-gnu-4-5-msingle-float.l: New file. * gas/mips/attr-gnu-4-5-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-5-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-5-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.l: Update expected output. * gas/mips/attr-gnu-4-6-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.l: Likewise. * gas/mips/mips.exp: Update expected output for FP ABI 5,6,7.
2014-09-12gas: fix bumping to architectures >v9 in sparc64-* targets.Jose E. Marchesi2-9/+25
This patch fixes two related problems: - By default gas is supposed to bump the current architecture (starting with v6) as it finds "higher" instructions as the assembling progresses. There are four possible cases depending on the usage of the -A and -bump options: (a) No -A and -bump are specified. In this case max_architecture must be the highest architecture not conflicting with the default architecture. The default opcode architecture is indirectly set in configure.tgt and is "v9" in sparc64 systems (from "v9-64"). Thus the maximum architecture in sparc64 systems must be "v9b". No warnings are echoed when the assembly of an instruction bumps the current architecture. (b) Only -bump is specified. This is like (a) but warnings are always issued when the assembly of an instruction bumps the current architecture. (c) Only -A is specified. In this case bumping to a new architecture is an error. (d) Both -A and -bump are specified. In this case max_architecture must be the highest architecture not conflicting with the default architecture, but warnings are only to be issued when bumping to an architecture higher than the architecture selected in the -A option. `max_architecture' is a global variable defined in tc-sparc.c which is initialized to the opcode architecture corresponding to the default architecture ("sparclite" for sparc-* targets and "v9" for sparc64-* targets). Then in `md_begin' it is set to the highest non-conflicting architecture, but only when both -A and -bump are specified. Thus (a) does not work: $ echo "fzero %f0" | as {standard input}: Assembler messages: {standard input}:1: Error: Architecture mismatch on "fzero". {standard input}:1: (Requires v9a|v9b; requested architecture is v9.) Neither (b): $ echo "fzero %f0" | as -bump {standard input}: Assembler messages: {standard input}:1: Error: Architecture mismatch on "fzero". {standard input}:1: (Requires v9a|v9b; requested architecture is v9.) Only (d) does: $ echo "fzero %f0" | as -Av9 -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9a" on "fzero" This patch fixes that function to "upgrade" `max_architecture' also in the (a) and (b) cases. Note that this problem becomes apparent only in sparc64-* targets because in sparc-* targets the default architecture is the "higher" among the 32bit architectures ("sparclite"). - Gas maintains a set of hardware capabilities associated with each gas architecture, in `sparc_arch_table'. On the other hand libopcodes maintains a set of hardware capabilities needed by each individual sparc instruction. When an instruction is assembled in `sparc_ip' gas checks for the presence of the hardware capabilities required by the instruction, emitting an error if some capability is missing. However, this mechanism does not work properly if the current architecture is bumped due to an instruction requiring new hw capabilities not present on either the default architecture or an architecture specified with -A: $ echo "fzero %f0" | as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9a" on "fzero" {standard input}:1: Error: Hardware capability "vis" not enabled for "fzero". This patch fixes this by adding the set of required hw caps of an instruction if it triggers an architecture bump. The patch has been tested in sparc64-unknown-linux-gnu. gas/ChangeLog: 2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps when bumping the current architecture. (md_begin): Adjust the highetst architecture level also when a specific architecture is not requested.
2014-09-12Add mips*-img-elf* target triple.Andrew Bennett4-2/+13
/ * configure.ac: Add mips*-img-elf* target triple. * configure: Regenerate. bfd/ * config.bfd: Add mips*-img-elf* target triple. gas/ * configure.tgt: Add mips*-img-elf* target triple. gas/testsuite/ * gas/mips/mips.exp: Add mips*-img-elf* target triple. binutils/testsuite/ * binutils-all/objcopy.exp: Add mips*-img-elf* target triple. * binutils-all/readelf.exp: Likewise. ld/ * configure.tgt: Add mips*-img-elf* target triple. ld/testsuite/ * ld-mips-elf/mips-elf.exp: Add support for mips*-img-elf* target triple.
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 06:59:50 +0000