path: root/autoconf.info

This is Info file autoconf.info, produced by Makeinfo version 1.67 from
the input file /home/bje/autoconf-2.13/autoconf.texi.

START-INFO-DIR-ENTRY
* Autoconf: (autoconf).         Create source code configuration scripts.
END-INFO-DIR-ENTRY

   Autoconf: Creating Automatic Configuration Scripts, by David
MacKenzie.

   This file documents the GNU Autoconf package for creating scripts to
configure source code packages using templates and an `m4' macro
package.

   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998 Free Software
Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the Foundation.


File: autoconf.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)

   This file documents the GNU Autoconf package for creating scripts to
configure source code packages using templates and an `m4' macro
package.  This is edition 2.13, for Autoconf version 2.13.

* Menu:

* Introduction::                Autoconf's purpose, strengths, and weaknesses.
* Making configure Scripts::    How to organize and produce Autoconf scripts.
* Setup::                       Initialization and output.
* Existing Tests::              Macros that check for particular features.
* Writing Tests::               How to write new feature checks.
* Results::                     What to do with results from feature checks.
* Writing Macros::              Adding new macros to Autoconf.
* Manual Configuration::        Selecting features that can't be guessed.
* Site Configuration::          Local defaults for `configure'.
* Invoking configure::          How to use the Autoconf output.
* Invoking config.status::      Recreating a configuration.
* Questions::                   Questions about Autoconf, with answers.
* Upgrading::                   Tips for upgrading from version 1.
* History::                     History of Autoconf.
* Old Macro Names::             Backward compatibility macros.
* Environment Variable Index::  Index of environment variables used.
* Output Variable Index::       Index of variables set in output files.
* Preprocessor Symbol Index::   Index of C preprocessor symbols defined.
* Macro Index::                 Index of Autoconf macros.

 -- The Detailed Node Listing --

Making `configure' Scripts

* Writing configure.in::        What to put in an Autoconf input file.
* Invoking autoscan::           Semi-automatic `configure.in' writing.
* Invoking ifnames::            Listing the conditionals in source code.
* Invoking autoconf::           How to create configuration scripts.
* Invoking autoreconf::         Remaking multiple `configure' scripts.

Initialization and Output Files

* Input::                       Where Autoconf should find files.
* Output::                      Creating output files.
* Makefile Substitutions::      Using output variables in `Makefile's.
* Configuration Headers::       Creating a configuration header file.
* Subdirectories::              Configuring independent packages together.
* Default Prefix::              Changing the default installation prefix.
* Versions::                    Version numbers in `configure'.

Substitutions in Makefiles

* Preset Output Variables::     Output variables that are always set.
* Build Directories::           Supporting multiple concurrent compiles.
* Automatic Remaking::          Makefile rules for configuring.

Configuration Header Files

* Header Templates::            Input for the configuration headers.
* Invoking autoheader::         How to create configuration templates.

Existing Tests

* Alternative Programs::        Selecting between alternative programs.
* Libraries::                   Library archives that might be missing.
* Library Functions::           C library functions that might be missing.
* Header Files::                Header files that might be missing.
* Structures::                  Structures or members that might be missing.
* Typedefs::                    `typedef's that might be missing.
* C Compiler Characteristics::
* Fortran 77 Compiler Characteristics::
* System Services::             Operating system services.
* UNIX Variants::               Special kludges for specific UNIX variants.

Alternative Programs

* Particular Programs::         Special handling to find certain programs.
* Generic Programs::            How to find other programs.

Library Functions

* Particular Functions::        Special handling to find certain functions.
* Generic Functions::           How to find other functions.

Header Files

* Particular Headers::          Special handling to find certain headers.
* Generic Headers::             How to find other headers.

Typedefs

* Particular Typedefs::         Special handling to find certain types.
* Generic Typedefs::            How to find other types.

Writing Tests

* Examining Declarations::      Detecting header files and declarations.
* Examining Syntax::            Detecting language syntax features.
* Examining Libraries::         Detecting functions and global variables.
* Run Time::                    Testing for run-time features.
* Portable Shell::              Shell script portability pitfalls.
* Testing Values and Files::    Checking strings and files.
* Multiple Cases::              Tests for several possible values.
* Language Choice::             Selecting which language to use for testing.

Checking Run Time Behavior

* Test Programs::               Running test programs.
* Guidelines::                  General rules for writing test programs.
* Test Functions::              Avoiding pitfalls in test programs.

Results of Tests

* Defining Symbols::            Defining C preprocessor symbols.
* Setting Output Variables::    Replacing variables in output files.
* Caching Results::             Speeding up subsequent `configure' runs.
* Printing Messages::           Notifying users of progress or problems.

Caching Results

* Cache Variable Names::        Shell variables used in caches.
* Cache Files::                 Files `configure' uses for caching.

Writing Macros

* Macro Definitions::           Basic format of an Autoconf macro.
* Macro Names::                 What to call your new macros.
* Quoting::                     Protecting macros from unwanted expansion.
* Dependencies Between Macros::  What to do when macros depend on other macros.

Dependencies Between Macros

* Prerequisite Macros::         Ensuring required information.
* Suggested Ordering::          Warning about possible ordering problems.
* Obsolete Macros::             Warning about old ways of doing things.

Manual Configuration

* Specifying Names::            Specifying the system type.
* Canonicalizing::              Getting the canonical system type.
* System Type Variables::       Variables containing the system type.
* Using System Type::           What to do with the system type.

Site Configuration

* External Software::           Working with other optional software.
* Package Options::             Selecting optional features.
* Site Details::                Configuring site details.
* Transforming Names::          Changing program names when installing.
* Site Defaults::               Giving `configure' local defaults.

Transforming Program Names When Installing

* Transformation Options::      `configure' options to transform names.
* Transformation Examples::     Sample uses of transforming names.
* Transformation Rules::        `Makefile' uses of transforming names.

Running `configure' Scripts

* Basic Installation::          Instructions for typical cases.
* Compilers and Options::       Selecting compilers and optimization.
* Multiple Architectures::      Compiling for multiple architectures at once.
* Installation Names::          Installing in different directories.
* Optional Features::           Selecting optional features.
* System Type::                 Specifying the system type.
* Sharing Defaults::            Setting site-wide defaults for `configure'.
* Operation Controls::          Changing how `configure' runs.

Questions About Autoconf

* Distributing::                Distributing `configure' scripts.
* Why GNU m4::                  Why not use the standard `m4'?
* Bootstrapping::               Autoconf and GNU `m4' require each other?
* Why Not Imake::               Why GNU uses `configure' instead of Imake.

Upgrading From Version 1

* Changed File Names::          Files you might rename.
* Changed Makefiles::           New things to put in `Makefile.in'.
* Changed Macros::              Macro calls you might replace.
* Invoking autoupdate::         Replacing old macro names in `configure.in'.
* Changed Results::             Changes in how to check test results.
* Changed Macro Writing::       Better ways to write your own macros.

History of Autoconf

* Genesis::                     Prehistory and naming of `configure'.
* Exodus::                      The plagues of `m4' and Perl.
* Leviticus::                   The priestly code of portability arrives.
* Numbers::                     Growth and contributors.
* Deuteronomy::                 Approaching the promises of easy configuration.


File: autoconf.info,  Node: Introduction,  Next: Making configure Scripts,  Prev: Top,  Up: Top

Introduction
************

     A physicist, an engineer, and a computer scientist were
     discussing the nature of God.  Surely a Physicist, said the
     physicist, because early in the Creation, God made Light; and you
     know, Maxwell's equations, the dual nature of electro-magnetic
     waves, the relativist consequences... An Engineer!, said the
     engineer, because before making Light, God split the Chaos into
     Land and Water; it takes a hell of an engineer to handle that big
     amount of mud, and orderly separation of solids from
     liquids... The computer scientist shouted: And the Chaos,
     where do you think it was coming from, hmm?
     
     ---Anonymous

   Autoconf is a tool for producing shell scripts that automatically
configure software source code packages to adapt to many kinds of
UNIX-like systems.  The configuration scripts produced by Autoconf are
independent of Autoconf when they are run, so their users do not need to
have Autoconf.

   The configuration scripts produced by Autoconf require no manual user
intervention when run; they do not normally even need an argument
specifying the system type.  Instead, they test for the presence of each
feature that the software package they are for might need individually.
(Before each check, they print a one-line message stating what they are
checking for, so the user doesn't get too bored while waiting for the
script to finish.)  As a result, they deal well with systems that are
hybrids or customized from the more common UNIX variants.  There is no
need to maintain files that list the features supported by each release
of each variant of UNIX.

   For each software package that Autoconf is used with, it creates a
configuration script from a template file that lists the system
features that the package needs or can use.  After the shell code to
recognize and respond to a system feature has been written, Autoconf
allows it to be shared by many software packages that can use (or need)
that feature.  If it later turns out that the shell code needs
adjustment for some reason, it needs to be changed in only one place;
all of the configuration scripts can be regenerated automatically to
take advantage of the updated code.

   The Metaconfig package is similar in purpose to Autoconf, but the
scripts it produces require manual user intervention, which is quite
inconvenient when configuring large source trees.  Unlike Metaconfig
scripts, Autoconf scripts can support cross-compiling, if some care is
taken in writing them.

   There are several jobs related to making portable software packages
that Autoconf currently does not do.  Among these are automatically
creating `Makefile' files with all of the standard targets, and
supplying replacements for standard library functions and header files
on systems that lack them.  Work is in progress to add those features in
the future.

   Autoconf imposes some restrictions on the names of macros used with
`#ifdef' in C programs (*note Preprocessor Symbol Index::.).

   Autoconf requires GNU `m4' in order to generate the scripts.  It
uses features that some UNIX versions of `m4' do not have.  It also
overflows internal limits of some versions of `m4', including GNU `m4'
1.0.  You must use version 1.1 or later of GNU `m4'.  Using version 1.3
or later will be much faster than 1.1 or 1.2.

   *Note Upgrading::, for information about upgrading from version 1.
*Note History::, for the story of Autoconf's development.  *Note
Questions::, for answers to some common questions about Autoconf.

   Mail suggestions and bug reports for Autoconf to
`bug-gnu-utils@prep.ai.mit.edu'.  Please include the Autoconf version
number, which you can get by running `autoconf --version'.


File: autoconf.info,  Node: Making configure Scripts,  Next: Setup,  Prev: Introduction,  Up: Top

Making `configure' Scripts
**************************

   The configuration scripts that Autoconf produces are by convention
called `configure'.  When run, `configure' creates several files,
replacing configuration parameters in them with appropriate values.
The files that `configure' creates are:

   * one or more `Makefile' files, one in each subdirectory of the
     package (*note Makefile Substitutions::.);

   * optionally, a C header file, the name of which is configurable,
     containing `#define' directives (*note Configuration Headers::.);

   * a shell script called `config.status' that, when run, will recreate
     the files listed above (*note Invoking config.status::.);

   * a shell script called `config.cache' that saves the results of
     running many of the tests (*note Cache Files::.);

   * a file called `config.log' containing any messages produced by
     compilers, to help debugging if `configure' makes a mistake.

   To create a `configure' script with Autoconf, you need to write an
Autoconf input file `configure.in' and run `autoconf' on it.  If you
write your own feature tests to supplement those that come with
Autoconf, you might also write files called `aclocal.m4' and
`acsite.m4'.  If you use a C header file to contain `#define'
directives, you might also write `acconfig.h', and you will distribute
the Autoconf-generated file `config.h.in' with the package.

   Here is a diagram showing how the files that can be used in
configuration are produced.  Programs that are executed are suffixed by
`*'.  Optional files are enclosed in square brackets (`[]').
`autoconf' and `autoheader' also read the installed Autoconf macro
files (by reading `autoconf.m4').

Files used in preparing a software package for distribution:
     your source files --> [autoscan*] --> [configure.scan] --> configure.in
     
     configure.in --.   .------> autoconf* -----> configure
                    +---+
     [aclocal.m4] --+   `---.
     [acsite.m4] ---'       |
                            +--> [autoheader*] -> [config.h.in]
     [acconfig.h] ----.     |
                      +-----'
     [config.h.top] --+
     [config.h.bot] --'
     
     Makefile.in -------------------------------> Makefile.in

Files used in configuring a software package:
                            .-------------> config.cache
     configure* ------------+-------------> config.log
                            |
     [config.h.in] -.       v            .-> [config.h] -.
                    +--> config.status* -+               +--> make*
     Makefile.in ---'                    `-> Makefile ---'

* Menu:

* Writing configure.in::        What to put in an Autoconf input file.
* Invoking autoscan::           Semi-automatic `configure.in' writing.
* Invoking ifnames::            Listing the conditionals in source code.
* Invoking autoconf::           How to create configuration scripts.
* Invoking autoreconf::         Remaking multiple `configure' scripts.


File: autoconf.info,  Node: Writing configure.in,  Next: Invoking autoscan,  Prev: Making configure Scripts,  Up: Making configure Scripts

Writing `configure.in'
======================

   To produce a `configure' script for a software package, create a
file called `configure.in' that contains invocations of the Autoconf
macros that test the system features your package needs or can use.
Autoconf macros already exist to check for many features; see *Note
Existing Tests::, for their descriptions.  For most other features, you
can use Autoconf template macros to produce custom checks; see *Note
Writing Tests::, for information about them.  For especially tricky or
specialized features, `configure.in' might need to contain some
hand-crafted shell commands.  The `autoscan' program can give you a
good start in writing `configure.in' (*note Invoking autoscan::., for
more information).

   The order in which `configure.in' calls the Autoconf macros is not
important, with a few exceptions.  Every `configure.in' must contain a
call to `AC_INIT' before the checks, and a call to `AC_OUTPUT' at the
end (*note Output::.).  Additionally, some macros rely on other macros
having been called first, because they check previously set values of
some variables to decide what to do.  These macros are noted in the
individual descriptions (*note Existing Tests::.), and they also warn
you when creating `configure' if they are called out of order.

   To encourage consistency, here is a suggested order for calling the
Autoconf macros.  Generally speaking, the things near the end of this
list could depend on things earlier in it.  For example, library
functions could be affected by typedefs and libraries.

     `AC_INIT(FILE)'
     checks for programs
     checks for libraries
     checks for header files
     checks for typedefs
     checks for structures
     checks for compiler characteristics
     checks for library functions
     checks for system services
     `AC_OUTPUT([FILE...])'

   It is best to put each macro call on its own line in `configure.in'.
Most of the macros don't add extra newlines; they rely on the newline
after the macro call to terminate the commands.  This approach makes
the generated `configure' script a little easier to read by not
inserting lots of blank lines.  It is generally safe to set shell
variables on the same line as a macro call, because the shell allows
assignments without intervening newlines.

   When calling macros that take arguments, there must not be any blank
space between the macro name and the open parenthesis.  Arguments can be
more than one line long if they are enclosed within the `m4' quote
characters `[' and `]'.  If you have a long line such as a list of file
names, you can generally use a backslash at the end of a line to
continue it logically on the next line (this is implemented by the
shell, not by anything special that Autoconf does).

   Some macros handle two cases: what to do if the given condition is
met, and what to do if the condition is not met.  In some places you
might want to do something if a condition is true but do nothing if it's
false, or vice versa.  To omit the true case, pass an empty value for
the ACTION-IF-FOUND argument to the macro.  To omit the false case,
omit the ACTION-IF-NOT-FOUND argument to the macro, including the comma
before it.

   You can include comments in `configure.in' files by starting them
with the `m4' builtin macro `dnl', which discards text up through the
next newline.  These comments do not appear in the generated
`configure' scripts.  For example, it is helpful to begin
`configure.in' files with a line like this:

     dnl Process this file with autoconf to produce a configure script.


File: autoconf.info,  Node: Invoking autoscan,  Next: Invoking ifnames,  Prev: Writing configure.in,  Up: Making configure Scripts

Using `autoscan' to Create `configure.in'
=========================================

   The `autoscan' program can help you create a `configure.in' file for
a software package.  `autoscan' examines source files in the directory
tree rooted at a directory given as a command line argument, or the
current directory if none is given.  It searches the source files for
common portability problems and creates a file `configure.scan' which
is a preliminary `configure.in' for that package.

   You should manually examine `configure.scan' before renaming it to
`configure.in'; it will probably need some adjustments.  Occasionally
`autoscan' outputs a macro in the wrong order relative to another
macro, so that `autoconf' produces a warning; you need to move such
macros manually.  Also, if you want the package to use a configuration
header file, you must add a call to `AC_CONFIG_HEADER' (*note
Configuration Headers::.).  You might also have to change or add some
`#if' directives to your program in order to make it work with Autoconf
(*note Invoking ifnames::., for information about a program that can
help with that job).

   `autoscan' uses several data files, which are installed along with
the distributed Autoconf macro files, to determine which macros to
output when it finds particular symbols in a package's source files.
These files all have the same format.  Each line consists of a symbol,
whitespace, and the Autoconf macro to output if that symbol is
encountered.  Lines starting with `#' are comments.

   `autoscan' is only installed if you already have Perl installed.
`autoscan' accepts the following options:

`--help'
     Print a summary of the command line options and exit.

`--macrodir=DIR'
     Look for the data files in directory DIR instead of the default
     installation directory.  You can also set the `AC_MACRODIR'
     environment variable to a directory; this option overrides the
     environment variable.

`--verbose'
     Print the names of the files it examines and the potentially
     interesting symbols it finds in them.  This output can be
     voluminous.

`--version'
     Print the version number of Autoconf and exit.


File: autoconf.info,  Node: Invoking ifnames,  Next: Invoking autoconf,  Prev: Invoking autoscan,  Up: Making configure Scripts

Using `ifnames' to List Conditionals
====================================

   `ifnames' can help when writing a `configure.in' for a software
package.  It prints the identifiers that the package already uses in C
preprocessor conditionals.  If a package has already been set up to
have some portability, this program can help you figure out what its
`configure' needs to check for.  It may help fill in some gaps in a
`configure.in' generated by `autoscan' (*note Invoking autoscan::.).

   `ifnames' scans all of the C source files named on the command line
(or the standard input, if none are given) and writes to the standard
output a sorted list of all the identifiers that appear in those files
in `#if', `#elif', `#ifdef', or `#ifndef' directives.  It prints each
identifier on a line, followed by a space-separated list of the files
in which that identifier occurs.

`ifnames' accepts the following options:

`--help'
`-h'
     Print a summary of the command line options and exit.

`--macrodir=DIR'
`-m DIR'
     Look for the Autoconf macro files in directory DIR instead of the
     default installation directory.  Only used to get the version
     number.  You can also set the `AC_MACRODIR' environment variable
     to a directory; this option overrides the environment variable.

`--version'
     Print the version number of Autoconf and exit.


File: autoconf.info,  Node: Invoking autoconf,  Next: Invoking autoreconf,  Prev: Invoking ifnames,  Up: Making configure Scripts

Using `autoconf' to Create `configure'
======================================

   To create `configure' from `configure.in', run the `autoconf'
program with no arguments.  `autoconf' processes `configure.in' with
the `m4' macro processor, using the Autoconf macros.  If you give
`autoconf' an argument, it reads that file instead of `configure.in'
and writes the configuration script to the standard output instead of
to `configure'.  If you give `autoconf' the argument `-', it reads the
standard input instead of `configure.in' and writes the configuration
script on the standard output.

   The Autoconf macros are defined in several files.  Some of the files
are distributed with Autoconf; `autoconf' reads them first.  Then it
looks for the optional file `acsite.m4' in the directory that contains
the distributed Autoconf macro files, and for the optional file
`aclocal.m4' in the current directory.  Those files can contain your
site's or the package's own Autoconf macro definitions (*note Writing
Macros::., for more information).  If a macro is defined in more than
one of the files that `autoconf' reads, the last definition it reads
overrides the earlier ones.

   `autoconf' accepts the following options:

`--help'
`-h'
     Print a summary of the command line options and exit.

`--localdir=DIR'
`-l DIR'
     Look for the package file `aclocal.m4' in directory DIR instead of
     in the current directory.

`--macrodir=DIR'
`-m DIR'
     Look for the installed macro files in directory DIR.  You can also
     set the `AC_MACRODIR' environment variable to a directory; this
     option overrides the environment variable.

`--version'
     Print the version number of Autoconf and exit.


File: autoconf.info,  Node: Invoking autoreconf,  Prev: Invoking autoconf,  Up: Making configure Scripts

Using `autoreconf' to Update `configure' Scripts
================================================

   If you have a lot of Autoconf-generated `configure' scripts, the
`autoreconf' program can save you some work.  It runs `autoconf' (and
`autoheader', where appropriate) repeatedly to remake the Autoconf
`configure' scripts and configuration header templates in the directory
tree rooted at the current directory.  By default, it only remakes
those files that are older than their `configure.in' or (if present)
`aclocal.m4'.  Since `autoheader' does not change the timestamp of its
output file if the file wouldn't be changing, this is not necessarily
the minimum amount of work.  If you install a new version of Autoconf,
you can make `autoreconf' remake *all* of the files by giving it the
`--force' option.

   If you give `autoreconf' the `--macrodir=DIR' or `--localdir=DIR'
options, it passes them down to `autoconf' and `autoheader' (with
relative paths adjusted properly).

   `autoreconf' does not support having, in the same directory tree,
both directories that are parts of a larger package (sharing
`aclocal.m4' and `acconfig.h'), and directories that are independent
packages (each with their own `aclocal.m4' and `acconfig.h').  It
assumes that they are all part of the same package, if you use
`--localdir', or that each directory is a separate package, if you
don't use it.  This restriction may be removed in the future.

   *Note Automatic Remaking::, for `Makefile' rules to automatically
remake `configure' scripts when their source files change.  That method
handles the timestamps of configuration header templates properly, but
does not pass `--macrodir=DIR' or `--localdir=DIR'.

`autoreconf' accepts the following options:

`--help'
`-h'
     Print a summary of the command line options and exit.

`--force'
`-f'
     Remake even `configure' scripts and configuration headers that are
     newer than their input files (`configure.in' and, if present,
     `aclocal.m4').

`--localdir=DIR'
`-l DIR'
     Have `autoconf' and `autoheader' look for the package files
     `aclocal.m4' and (`autoheader' only) `acconfig.h' (but not
     `FILE.top' and `FILE.bot') in directory DIR instead of in the
     directory containing each `configure.in'.

`--macrodir=DIR'
`-m DIR'
     Look for the Autoconf macro files in directory DIR instead of the
     default installation directory.  You can also set the `AC_MACRODIR'
     environment variable to a directory; this option overrides the
     environment variable.

`--verbose'
     Print the name of each directory where `autoreconf' runs
     `autoconf' (and `autoheader', if appropriate).

`--version'
     Print the version number of Autoconf and exit.


File: autoconf.info,  Node: Setup,  Next: Existing Tests,  Prev: Making configure Scripts,  Up: Top

Initialization and Output Files
*******************************

   Autoconf-generated `configure' scripts need some information about
how to initialize, such as how to find the package's source files; and
about the output files to produce.  The following sections describe
initialization and creating output files.

* Menu:

* Input::                       Where Autoconf should find files.
* Output::                      Creating output files.
* Makefile Substitutions::      Using output variables in `Makefile's.
* Configuration Headers::       Creating a configuration header file.
* Subdirectories::              Configuring independent packages together.
* Default Prefix::              Changing the default installation prefix.
* Versions::                    Version numbers in `configure'.


File: autoconf.info,  Node: Input,  Next: Output,  Prev: Setup,  Up: Setup

Finding `configure' Input
=========================

   Every `configure' script must call `AC_INIT' before doing anything
else.  The only other required macro is `AC_OUTPUT' (*note Output::.).

 - Macro: AC_INIT (UNIQUE-FILE-IN-SOURCE-DIR)
     Process any command-line arguments and find the source code
     directory.  UNIQUE-FILE-IN-SOURCE-DIR is some file that is in the
     package's source directory; `configure' checks for this file's
     existence to make sure that the directory that it is told contains
     the source code in fact does.  Occasionally people accidentally
     specify the wrong directory with `--srcdir'; this is a safety
     check.  *Note Invoking configure::, for more information.

   Packages that do manual configuration or use the `install' program
might need to tell `configure' where to find some other shell scripts
by calling `AC_CONFIG_AUX_DIR', though the default places it looks are
correct for most cases.

 - Macro: AC_CONFIG_AUX_DIR(DIR)
     Use the `install-sh', `config.sub', `config.guess', and Cygnus
     `configure' scripts that are in directory DIR.  These are
     auxiliary files used in configuration.  DIR can be either absolute
     or relative to `SRCDIR'.  The default is `SRCDIR' or `SRCDIR/..' or
     `SRCDIR/../..', whichever is the first that contains `install-sh'.
     The other files are not checked for, so that using
     `AC_PROG_INSTALL' does not automatically require distributing the
     other auxiliary files.  It checks for `install.sh' also, but that
     name is obsolete because some `make' programs have a rule that
     creates `install' from it if there is no `Makefile'.


File: autoconf.info,  Node: Output,  Next: Makefile Substitutions,  Prev: Input,  Up: Setup

Creating Output Files
=====================

   Every Autoconf-generated `configure' script must finish by calling
`AC_OUTPUT'.  It is the macro that creates the `Makefile's and optional
other files resulting from configuration.  The only other required
macro is `AC_INIT' (*note Input::.).

 - Macro: AC_OUTPUT ([FILE... [, EXTRA-CMDS [, INIT-CMDS]]])
     Create output files.  Call this macro once, at the end of
     `configure.in'.  The FILE... argument is a whitespace-separated
     list of output files; it may be empty.  This macro creates each
     file `FILE' by copying an input file (by default named `FILE.in'),
     substituting the output variable values.  *Note Makefile
     Substitutions::, for more information on using output variables.
     *Note Setting Output Variables::, for more information on creating
     them.  This macro creates the directory that the file is in if it
     doesn't exist (but not the parents of that directory).  Usually,
     `Makefile's are created this way, but other files, such as
     `.gdbinit', can be specified as well.

     If `AC_CONFIG_HEADER', `AC_LINK_FILES', or `AC_CONFIG_SUBDIRS' has
     been called, this macro also creates the files named as their
     arguments.

     A typical call to `AC_OUTPUT' looks like this:
          AC_OUTPUT(Makefile src/Makefile man/Makefile X/Imakefile)

     You can override an input file name by appending to FILE a
     colon-separated list of input files.  Examples:
          AC_OUTPUT(Makefile:templates/top.mk lib/Makefile:templates/lib.mk)
          AC_OUTPUT(Makefile:templates/vars.mk:Makefile.in:templates/rules.mk)
     Doing this allows you to keep your file names acceptable to
     MS-DOS, or to prepend and/or append boilerplate to the file.

     If you pass EXTRA-CMDS, those commands will be inserted into
     `config.status' to be run after all its other processing.  If
     INIT-CMDS are given, they are inserted just before EXTRA-CMDS,
     with shell variable, command, and backslash substitutions
     performed on them in `configure'.  You can use INIT-CMDS to pass
     variables from `configure' to the EXTRA-CMDS.  If
     `AC_OUTPUT_COMMANDS' has been called, the commands given to it are
     run just before the commands passed to this macro.

 - Macro: AC_OUTPUT_COMMANDS (EXTRA-CMDS [, INIT-CMDS])
     Specify additional shell commands to run at the end of
     `config.status', and shell commands to initialize any variables
     from `configure'.  This macro may be called multiple times.  Here
     is an unrealistic example:

          fubar=27
          AC_OUTPUT_COMMANDS([echo this is extra $fubar, and so on.], fubar=$fubar)
          AC_OUTPUT_COMMANDS([echo this is another, extra, bit], [echo init bit])

   If you run `make' on subdirectories, you should run it using the
`make' variable `MAKE'.  Most versions of `make' set `MAKE' to the name
of the `make' program plus any options it was given.  (But many do not
include in it the values of any variables set on the command line, so
those are not passed on automatically.) Some old versions of `make' do
not set this variable.  The following macro allows you to use it even
with those versions.

 - Macro: AC_PROG_MAKE_SET
     If `make' predefines the variable `MAKE', define output variable
     `SET_MAKE' to be empty.  Otherwise, define `SET_MAKE' to contain
     `MAKE=make'.  Calls `AC_SUBST' for `SET_MAKE'.

   To use this macro, place a line like this in each `Makefile.in' that
runs `MAKE' on other directories:

     @SET_MAKE@


File: autoconf.info,  Node: Makefile Substitutions,  Next: Configuration Headers,  Prev: Output,  Up: Setup

Substitutions in Makefiles
==========================

   Each subdirectory in a distribution that contains something to be
compiled or installed should come with a file `Makefile.in', from which
`configure' will create a `Makefile' in that directory.  To create a
`Makefile', `configure' performs a simple variable substitution,
replacing occurrences of `@VARIABLE@' in `Makefile.in' with the value
that `configure' has determined for that variable.  Variables that are
substituted into output files in this way are called "output
variables".  They are ordinary shell variables that are set in
`configure'.  To make `configure' substitute a particular variable into
the output files, the macro `AC_SUBST' must be called with that
variable name as an argument.  Any occurrences of `@VARIABLE@' for
other variables are left unchanged.  *Note Setting Output Variables::,
for more information on creating output variables with `AC_SUBST'.

   A software package that uses a `configure' script should be
distributed with a file `Makefile.in', but no `Makefile'; that way, the
user has to properly configure the package for the local system before
compiling it.

   *Note Makefile Conventions: (standards)Makefile Conventions, for
more information on what to put in `Makefile's.

* Menu:

* Preset Output Variables::     Output variables that are always set.
* Build Directories::           Supporting multiple concurrent compiles.
* Automatic Remaking::          Makefile rules for configuring.


File: autoconf.info,  Node: Preset Output Variables,  Next: Build Directories,  Prev: Makefile Substitutions,  Up: Makefile Substitutions

Preset Output Variables
-----------------------

   Some output variables are preset by the Autoconf macros.  Some of the
Autoconf macros set additional output variables, which are mentioned in
the descriptions for those macros.  *Note Output Variable Index::, for a
complete list of output variables.  Here is what each of the preset ones
contains.  *Note Variables for Installation Directories:
(standards)Directory Variables, for more information about the
variables with names that end in `dir'.

 - Variable: bindir
     The directory for installing executables that users run.

 - Variable: configure_input
     A comment saying that the file was generated automatically by
     `configure' and giving the name of the input file.  `AC_OUTPUT'
     adds a comment line containing this variable to the top of every
     `Makefile' it creates.  For other files, you should reference this
     variable in a comment at the top of each input file.  For example,
     an input shell script should begin like this:

          #! /bin/sh
          # @configure_input@

     The presence of that line also reminds people editing the file
     that it needs to be processed by `configure' in order to be used.

 - Variable: datadir
     The directory for installing read-only architecture-independent
     data.

 - Variable: exec_prefix
     The installation prefix for architecture-dependent files.

 - Variable: includedir
     The directory for installing C header files.

 - Variable: infodir
     The directory for installing documentation in Info format.

 - Variable: libdir
     The directory for installing object code libraries.

 - Variable: libexecdir
     The directory for installing executables that other programs run.

 - Variable: localstatedir
     The directory for installing modifiable single-machine data.

 - Variable: mandir
     The top-level directory for installing documentation in man format.

 - Variable: oldincludedir
     The directory for installing C header files for non-gcc compilers.

 - Variable: prefix
     The installation prefix for architecture-independent files.

 - Variable: sbindir
     The directory for installing executables that system
     administrators run.

 - Variable: sharedstatedir
     The directory for installing modifiable architecture-independent
     data.

 - Variable: srcdir
     The directory that contains the source code for that `Makefile'.

 - Variable: sysconfdir
     The directory for installing read-only single-machine data.

 - Variable: top_srcdir
     The top-level source code directory for the package.  In the
     top-level directory, this is the same as `srcdir'.

 - Variable: CFLAGS
     Debugging and optimization options for the C compiler.  If it is
     not set in the environment when `configure' runs, the default
     value is set when you call `AC_PROG_CC' (or empty if you don't).
     `configure' uses this variable when compiling programs to test for
     C features.

 - Variable: CPPFLAGS
     Header file search directory (`-IDIR') and any other miscellaneous
     options for the C preprocessor and compiler.  If it is not set in
     the environment when `configure' runs, the default value is empty.
     `configure' uses this variable when compiling or preprocessing
     programs to test for C features.

 - Variable: CXXFLAGS
     Debugging and optimization options for the C++ compiler.  If it is
     not set in the environment when `configure' runs, the default
     value is set when you call `AC_PROG_CXX' (or empty if you don't).
     `configure' uses this variable when compiling programs to test for
     C++ features.

 - Variable: FFLAGS
     Debugging and optimization options for the Fortran 77 compiler.
     If it is not set in the environment when `configure' runs, the
     default value is set when you call `AC_PROG_F77' (or empty if you
     don't).  `configure' uses this variable when compiling programs to
     test for Fortran 77 features.

 - Variable: DEFS
     `-D' options to pass to the C compiler.  If `AC_CONFIG_HEADER' is
     called, `configure' replaces `@DEFS@' with `-DHAVE_CONFIG_H'
     instead (*note Configuration Headers::.).  This variable is not
     defined while `configure' is performing its tests, only when
     creating the output files.  *Note Setting Output Variables::, for
     how to check the results of previous tests.

 - Variable: LDFLAGS
     Stripping (`-s') and any other miscellaneous options for the
     linker.  If it is not set in the environment when `configure' runs,
     the default value is empty.  `configure' uses this variable when
     linking programs to test for C features.

 - Variable: LIBS
     `-l' and `-L' options to pass to the linker.


File: autoconf.info,  Node: Build Directories,  Next: Automatic Remaking,  Prev: Preset Output Variables,  Up: Makefile Substitutions

Build Directories
-----------------

   You can support compiling a software package for several
architectures simultaneously from the same copy of the source code.
The object files for each architecture are kept in their own directory.

   To support doing this, `make' uses the `VPATH' variable to find the
files that are in the source directory.  GNU `make' and most other
recent `make' programs can do this.  Older `make' programs do not
support `VPATH'; when using them, the source code must be in the same
directory as the object files.

   To support `VPATH', each `Makefile.in' should contain two lines that
look like:

     srcdir = @srcdir@
     VPATH = @srcdir@

   Do not set `VPATH' to the value of another variable, for example
`VPATH = $(srcdir)', because some versions of `make' do not do variable
substitutions on the value of `VPATH'.

   `configure' substitutes in the correct value for `srcdir' when it
produces `Makefile'.

   Do not use the `make' variable `$<', which expands to the pathname
of the file in the source directory (found with `VPATH'), except in
implicit rules.  (An implicit rule is one such as `.c.o', which tells
how to create a `.o' file from a `.c' file.)  Some versions of `make'
do not set `$<' in explicit rules; they expand it to an empty value.

   Instead, `Makefile' command lines should always refer to source
files by prefixing them with `$(srcdir)/'.  For example:

     time.info: time.texinfo
             $(MAKEINFO) $(srcdir)/time.texinfo


File: autoconf.info,  Node: Automatic Remaking,  Prev: Build Directories,  Up: Makefile Substitutions

Automatic Remaking
------------------

   You can put rules like the following in the top-level `Makefile.in'
for a package to automatically update the configuration information when
you change the configuration files.  This example includes all of the
optional files, such as `aclocal.m4' and those related to configuration
header files.  Omit from the `Makefile.in' rules any of these files
that your package does not use.

   The `${srcdir}/' prefix is included because of limitations in the
`VPATH' mechanism.

   The `stamp-' files are necessary because the timestamps of
`config.h.in' and `config.h' will not be changed if remaking them does
not change their contents.  This feature avoids unnecessary
recompilation.  You should include the file `stamp-h.in' your package's
distribution, so `make' will consider `config.h.in' up to date.  On
some old BSD systems, `touch' or any command that results in an empty
file does not update the timestamps, so use a command like `echo' as a
workaround.

     ${srcdir}/configure: configure.in aclocal.m4
             cd ${srcdir} && autoconf
     
     # autoheader might not change config.h.in, so touch a stamp file.
     ${srcdir}/config.h.in: stamp-h.in
     ${srcdir}/stamp-h.in: configure.in aclocal.m4 acconfig.h \
         config.h.top config.h.bot
             cd ${srcdir} && autoheader
             echo timestamp > ${srcdir}/stamp-h.in
     
     config.h: stamp-h
     stamp-h: config.h.in config.status
             ./config.status
     
     Makefile: Makefile.in config.status
             ./config.status
     
     config.status: configure
             ./config.status --recheck

   In addition, you should pass `echo timestamp > stamp-h' in the
EXTRA-CMDS argument to `AC_OUTPUT', so `config.status' will ensure that
`config.h' is considered up to date.  *Note Output::, for more
information about `AC_OUTPUT'.

   *Note Invoking config.status::, for more examples of handling
configuration-related dependencies.


File: autoconf.info,  Node: Configuration Headers,  Next: Subdirectories,  Prev: Makefile Substitutions,  Up: Setup

Configuration Header Files
==========================

   When a package tests more than a few C preprocessor symbols, the
command lines to pass `-D' options to the compiler can get quite long.
This causes two problems.  One is that the `make' output is hard to
visually scan for errors.  More seriously, the command lines can exceed
the length limits of some operating systems.  As an alternative to
passing `-D' options to the compiler, `configure' scripts can create a
C header file containing `#define' directives.  The `AC_CONFIG_HEADER'
macro selects this kind of output.  It should be called right after
`AC_INIT'.

   The package should `#include' the configuration header file before
any other header files, to prevent inconsistencies in declarations (for
example, if it redefines `const').  Use `#include <config.h>' instead
of `#include "config.h"', and pass the C compiler a `-I.' option (or
`-I..'; whichever directory contains `config.h').  That way, even if
the source directory is configured itself (perhaps to make a
distribution), other build directories can also be configured without
finding the `config.h' from the source directory.

 - Macro: AC_CONFIG_HEADER (HEADER-TO-CREATE ...)
     Make `AC_OUTPUT' create the file(s) in the whitespace-separated
     list HEADER-TO-CREATE containing C preprocessor `#define'
     statements, and replace `@DEFS@' in generated files with
     `-DHAVE_CONFIG_H' instead of the value of `DEFS'.  The usual name
     for HEADER-TO-CREATE is `config.h'.

     If HEADER-TO-CREATE already exists and its contents are identical
     to what `AC_OUTPUT' would put in it, it is left alone.  Doing this
     allows some changes in configuration without needlessly causing
     object files that depend on the header file to be recompiled.

     Usually the input file is named `HEADER-TO-CREATE.in'; however,
     you can override the input file name by appending to
     HEADER-TO-CREATE, a colon-separated list of input files.  Examples:
          AC_CONFIG_HEADER(defines.h:defines.hin)
          AC_CONFIG_HEADER(defines.h:defs.pre:defines.h.in:defs.post)

     Doing this allows you to keep your file names acceptable to
     MS-DOS, or to prepend and/or append boilerplate to the file.

* Menu:

* Header Templates::            Input for the configuration headers.
* Invoking autoheader::         How to create configuration templates.


File: autoconf.info,  Node: Header Templates,  Next: Invoking autoheader,  Prev: Configuration Headers,  Up: Configuration Headers

Configuration Header Templates
------------------------------

   Your distribution should contain a template file that looks as you
want the final header file to look, including comments, with default
values in the `#define' statements.  For example, suppose your
`configure.in' makes these calls:

     AC_CONFIG_HEADER(conf.h)
     AC_CHECK_HEADERS(unistd.h)

Then you could have code like the following in `conf.h.in'.  On systems
that have `unistd.h', `configure' will change the 0 to a 1.  On other
systems, it will leave the line unchanged.

     /* Define as 1 if you have unistd.h.  */
     #define HAVE_UNISTD_H 0

   Alternately, if your code tests for configuration options using
`#ifdef' instead of `#if', a default value can be to `#undef' the
variable instead of to define it to a value.  On systems that have
`unistd.h', `configure' will change the second line to read `#define
HAVE_UNISTD_H 1'.  On other systems, it will comment that line out (in
case the system predefines that symbol).

     /* Define if you have unistd.h.  */
     #undef HAVE_UNISTD_H


File: autoconf.info,  Node: Invoking autoheader,  Prev: Header Templates,  Up: Configuration Headers

Using `autoheader' to Create `config.h.in'
------------------------------------------

   The `autoheader' program can create a template file of C `#define'
statements for `configure' to use.  If `configure.in' invokes
`AC_CONFIG_HEADER(FILE)', `autoheader' creates `FILE.in'; if multiple
file arguments are given, the first one is used.  Otherwise,
`autoheader' creates `config.h.in'.

   If you give `autoheader' an argument, it uses that file instead of
`configure.in' and writes the header file to the standard output
instead of to `config.h.in'.  If you give `autoheader' an argument of
`-', it reads the standard input instead of `configure.in' and writes
the header file to the standard output.

   `autoheader' scans `configure.in' and figures out which C
preprocessor symbols it might define.  It copies comments and `#define'
and `#undef' statements from a file called `acconfig.h', which comes
with and is installed with Autoconf.  It also uses a file called
`acconfig.h' in the current directory, if present.  If you `AC_DEFINE'
any additional symbols, you must create that file with entries for
them.  For symbols defined by `AC_CHECK_HEADERS', `AC_CHECK_FUNCS',
`AC_CHECK_SIZEOF', or `AC_CHECK_LIB', `autoheader' generates comments
and `#undef' statements itself rather than copying them from a file,
since the possible symbols are effectively limitless.

   The file that `autoheader' creates contains mainly `#define' and
`#undef' statements and their accompanying comments.  If `./acconfig.h'
contains the string `@TOP@', `autoheader' copies the lines before the
line containing `@TOP@' into the top of the file that it generates.
Similarly, if `./acconfig.h' contains the string `@BOTTOM@',
`autoheader' copies the lines after that line to the end of the file it
generates.  Either or both of those strings may be omitted.

   An alternate way to produce the same effect is to create the files
`FILE.top' (typically `config.h.top') and/or `FILE.bot' in the current
directory.  If they exist, `autoheader' copies them to the beginning
and end, respectively, of its output.  Their use is discouraged because
they have file names that contain two periods, and so can not be stored
on MS-DOS; also, they are two more files to clutter up the directory.
But if you use the `--localdir=DIR' option to use an `acconfig.h' in
another directory, they give you a way to put custom boilerplate in each
individual `config.h.in'.

   `autoheader' accepts the following options:

`--help'
`-h'
     Print a summary of the command line options and exit.

`--localdir=DIR'
`-l DIR'
     Look for the package files `aclocal.m4' and `acconfig.h' (but not
     `FILE.top' and `FILE.bot') in directory DIR instead of in the
     current directory.

`--macrodir=DIR'
`-m DIR'
     Look for the installed macro files and `acconfig.h' in directory
     DIR.  You can also set the `AC_MACRODIR' environment variable to a
     directory; this option overrides the environment variable.

`--version'
     Print the version number of Autoconf and exit.


File: autoconf.info,  Node: Subdirectories,  Next: Default Prefix,  Prev: Configuration Headers,  Up: Setup

Configuring Other Packages in Subdirectories
============================================

   In most situations, calling `AC_OUTPUT' is sufficient to produce
`Makefile's in subdirectories.  However, `configure' scripts that
control more than one independent package can use `AC_CONFIG_SUBDIRS'
to run `configure' scripts for other packages in subdirectories.

 - Macro: AC_CONFIG_SUBDIRS (DIR ...)
     Make `AC_OUTPUT' run `configure' in each subdirectory DIR in the
     given whitespace-separated list.  If a given DIR is not found, no
     error is reported, so a `configure' script can configure whichever
     parts of a large source tree are present.  If a given DIR contains
     `configure.in' but no `configure', the Cygnus `configure' script
     found by `AC_CONFIG_AUXDIR' is used.

     The subdirectory `configure' scripts are given the same command
     line options that were given to this `configure' script, with
     minor changes if needed (e.g., to adjust a relative path for the
     cache file or source directory).  This macro also sets the output
     variable `subdirs' to the list of directories `DIR ...'.
     `Makefile' rules can use this variable to determine which
     subdirectories to recurse into.  This macro may be called multiple
     times.


File: autoconf.info,  Node: Default Prefix,  Next: Versions,  Prev: Subdirectories,  Up: Setup

Default Prefix
==============

   By default, `configure' sets the prefix for files it installs to
`/usr/local'.  The user of `configure' can select a different prefix
using the `--prefix' and `--exec-prefix' options.  There are two ways
to change the default: when creating `configure', and when running it.

   Some software packages might want to install in a directory besides
`/usr/local' by default.  To accomplish that, use the
`AC_PREFIX_DEFAULT' macro.

 - Macro: AC_PREFIX_DEFAULT (PREFIX)
     Set the default installation prefix to PREFIX instead of
     `/usr/local'.

   It may be convenient for users to have `configure' guess the
installation prefix from the location of a related program that they
have already installed.  If you wish to do that, you can call
`AC_PREFIX_PROGRAM'.

 - Macro: AC_PREFIX_PROGRAM (PROGRAM)
     If the user did not specify an installation prefix (using the
     `--prefix' option), guess a value for it by looking for PROGRAM in
     `PATH', the way the shell does.  If PROGRAM is found, set the
     prefix to the parent of the directory containing PROGRAM;
     otherwise leave the prefix specified in `Makefile.in' unchanged.
     For example, if PROGRAM is `gcc' and the `PATH' contains
     `/usr/local/gnu/bin/gcc', set the prefix to `/usr/local/gnu'.


File: autoconf.info,  Node: Versions,  Prev: Default Prefix,  Up: Setup

Version Numbers in `configure'
==============================

   The following macros manage version numbers for `configure' scripts.
Using them is optional.

 - Macro: AC_PREREQ (VERSION)
     Ensure that a recent enough version of Autoconf is being used.  If
     the version of Autoconf being used to create `configure' is earlier
     than VERSION, print an error message on the standard error output
     and do not create `configure'.  For example:

          AC_PREREQ(1.8)

     This macro is useful if your `configure.in' relies on non-obvious
     behavior that changed between Autoconf releases.  If it merely
     needs recently added macros, then `AC_PREREQ' is less useful,
     because the `autoconf' program already tells the user which macros
     are not found.  The same thing happens if `configure.in' is
     processed by a version of Autoconf older than when `AC_PREREQ' was
     added.

 - Macro: AC_REVISION (REVISION-INFO)
     Copy revision stamp REVISION-INFO into the `configure' script,
     with any dollar signs or double-quotes removed.  This macro lets
     you put a revision stamp from `configure.in' into `configure'
     without RCS or CVS changing it when you check in `configure'.  That
     way, you can determine easily which revision of `configure.in' a
     particular `configure' corresponds to.

     It is a good idea to call this macro before `AC_INIT' so that the
     revision number is near the top of both `configure.in' and
     `configure'.  To support doing that, the `AC_REVISION' output
     begins with `#! /bin/sh', like the normal start of a `configure'
     script does.

     For example, this line in `configure.in':

          AC_REVISION($Revision: 1.30 $)dnl

     produces this in `configure':

          #! /bin/sh
          # From configure.in Revision: 1.30


File: autoconf.info,  Node: Existing Tests,  Next: Writing Tests,  Prev: Setup,  Up: Top

Existing Tests
**************

   These macros test for particular system features that packages might
need or want to use.  If you need to test for a kind of feature that
none of these macros check for, you can probably do it by calling
primitive test macros with appropriate arguments (*note Writing
Tests::.).

   These tests print messages telling the user which feature they're
checking for, and what they find.  They cache their results for future
`configure' runs (*note Caching Results::.).

   Some of these macros set output variables.  *Note Makefile
Substitutions::, for how to get their values.  The phrase "define NAME"
is used below as a shorthand to mean "define C preprocessor symbol NAME
to the value 1".  *Note Defining Symbols::, for how to get those symbol
definitions into your program.

* Menu:

* Alternative Programs::        Selecting between alternative programs.
* Libraries::                   Library archives that might be missing.
* Library Functions::           C library functions that might be missing.
* Header Files::                Header files that might be missing.
* Structures::                  Structures or members that might be missing.
* Typedefs::                    `typedef's that might be missing.
* C Compiler Characteristics::
* Fortran 77 Compiler Characteristics::
* System Services::             Operating system services.
* UNIX Variants::               Special kludges for specific UNIX variants.


File: autoconf.info,  Node: Alternative Programs,  Next: Libraries,  Prev: Existing Tests,  Up: Existing Tests

Alternative Programs
====================

   These macros check for the presence or behavior of particular
programs.  They are used to choose between several alternative programs
and to decide what to do once one has been chosen.  If there is no
macro specifically defined to check for a program you need, and you
don't need to check for any special properties of it, then you can use
one of the general program check macros.

* Menu:

* Particular Programs::         Special handling to find certain programs.
* Generic Programs::            How to find other programs.


File: autoconf.info,  Node: Particular Programs,  Next: Generic Programs,  Prev: Alternative Programs,  Up: Alternative Programs

Particular Program Checks
-------------------------

   These macros check for particular programs--whether they exist, and
in some cases whether they support certain features.

 - Macro: AC_DECL_YYTEXT
     Define `YYTEXT_POINTER' if `yytext' is a `char *' instead of a
     `char []'.  Also set output variable `LEX_OUTPUT_ROOT' to the base
     of the file name that the lexer generates; usually `lex.yy', but
     sometimes something else.  These results vary according to whether
     `lex' or `flex' is being used.

 - Macro: AC_PROG_AWK
     Check for `mawk', `gawk', `nawk', and `awk', in that order, and
     set output variable `AWK' to the first one that it finds.  It
     tries `mawk' first because that is reported to be the fastest
     implementation.

 - Macro: AC_PROG_CC
     Determine a C compiler to use.  If `CC' is not already set in the
     environment, check for `gcc', and use `cc' if that's not found.
     Set output variable `CC' to the name of the compiler found.

     If using the GNU C compiler, set shell variable `GCC' to `yes',
     empty otherwise.  If output variable `CFLAGS' was not already set,
     set it to `-g -O2' for the GNU C compiler (`-O2' on systems where
     GCC does not accept `-g'), or `-g' for other compilers.

     If the C compiler being used does not produce executables that can
     run on the system where `configure' is being run, set the shell
     variable `cross_compiling' to `yes', otherwise `no'.  In other
     words, this tests whether the build system type is different from
     the host system type (the target system type is irrelevant to this
     test).  *Note Manual Configuration::, for more on support for
     cross compiling.

 - Macro: AC_PROG_CC_C_O
     If the C compiler does not accept the `-c' and `-o' options
     simultaneously, define `NO_MINUS_C_MINUS_O'.

 - Macro: AC_PROG_CPP
     Set output variable `CPP' to a command that runs the C
     preprocessor.  If `$CC -E' doesn't work, it uses `/lib/cpp'.  It
     is only portable to run `CPP' on files with a `.c' extension.

     If the current language is C (*note Language Choice::.), many of
     the specific test macros use the value of `CPP' indirectly by
     calling `AC_TRY_CPP', `AC_CHECK_HEADER', `AC_EGREP_HEADER', or
     `AC_EGREP_CPP'.

 - Macro: AC_PROG_CXX
     Determine a C++ compiler to use.  Check if the environment variable
     `CXX' or `CCC' (in that order) is set; if so, set output variable
     `CXX' to its value.  Otherwise search for a C++ compiler under
     likely names (`c++', `g++', `gcc', `CC', `cxx', and `cc++').  If
     none of those checks succeed, as a last resort set `CXX' to `gcc'.

     If using the GNU C++ compiler, set shell variable `GXX' to `yes',
     empty otherwise.  If output variable `CXXFLAGS' was not already
     set, set it to `-g -O2' for the GNU C++ compiler (`-O2' on systems
     where G++ does not accept `-g'), or `-g' for other compilers.

     If the C++ compiler being used does not produce executables that
     can run on the system where `configure' is being run, set the shell
     variable `cross_compiling' to `yes', otherwise `no'.  In other
     words, this tests whether the build system type is different from
     the host system type (the target system type is irrelevant to this
     test).  *Note Manual Configuration::, for more on support for
     cross compiling.

 - Macro: AC_PROG_CXXCPP
     Set output variable `CXXCPP' to a command that runs the C++
     preprocessor.  If `$CXX -E' doesn't work, it uses `/lib/cpp'.  It
     is only portable to run `CXXCPP' on files with a `.c', `.C', or
     `.cc' extension.

     If the current language is C++ (*note Language Choice::.), many of
     the specific test macros use the value of `CXXCPP' indirectly by
     calling `AC_TRY_CPP', `AC_CHECK_HEADER', `AC_EGREP_HEADER', or
     `AC_EGREP_CPP'.

 - Macro: AC_PROG_F77
     Determine a Fortran 77 compiler to use.  If `F77' is not already
     set in the environment, check for `g77', `f77' and `f2c', in that
     order.  Set the output variable `F77' to the name of the compiler
     found.

     If using `g77' (the GNU Fortran 77 compiler), then `AC_PROG_F77'
     will set the shell variable `G77' to `yes', and empty otherwise.
     If the output variable `FFLAGS' was not already set in the
     environment, then set it to `-g -02' for `g77' (or `-O2' where
     `g77' does not accept `-g').  Otherwise, set `FFLAGS' to `-g' for
     all other Fortran 77 compilers.

 - Macro: AC_PROG_F77_C_O
     Test if the Fortran 77 compiler accepts the options `-c' and `-o'
     simultaneously, and define `F77_NO_MINUS_C_MINUS_O' if it does not.

 - Macro: AC_PROG_GCC_TRADITIONAL
     Add `-traditional' to output variable `CC' if using the GNU C
     compiler and `ioctl' does not work properly without
     `-traditional'.  That usually happens when the fixed header files
     have not been installed on an old system.  Since recent versions
     of the GNU C compiler fix the header files automatically when
     installed, this is becoming a less prevalent problem.

 - Macro: AC_PROG_INSTALL
     Set output variable `INSTALL' to the path of a BSD compatible
     `install' program, if one is found in the current `PATH'.
     Otherwise, set `INSTALL' to `DIR/install-sh -c', checking the
     directories specified to `AC_CONFIG_AUX_DIR' (or its default
     directories) to determine DIR (*note Output::.).  Also set the
     variables `INSTALL_PROGRAM' and `INSTALL_SCRIPT' to `${INSTALL}'
     and `INSTALL_DATA' to `${INSTALL} -m 644'.

     This macro screens out various instances of `install' known to not
     work.  It prefers to find a C program rather than a shell script,
     for speed.  Instead of `install-sh', it can also use `install.sh',
     but that name is obsolete because some `make' programs have a rule
     that creates `install' from it if there is no `Makefile'.

     A copy of `install-sh' which you may use comes with Autoconf.  If
     you use `AC_PROG_INSTALL', you must include either `install-sh' or
     `install.sh' in your distribution, or `configure' will produce an
     error message saying it can't find them--even if the system you're
     on has a good `install' program.  This check is a safety measure
     to prevent you from accidentally leaving that file out, which
     would prevent your package from installing on systems that don't
     have a BSD-compatible `install' program.

     If you need to use your own installation program because it has
     features not found in standard `install' programs, there is no
     reason to use `AC_PROG_INSTALL'; just put the pathname of your
     program into your `Makefile.in' files.

 - Macro: AC_PROG_LEX
     If `flex' is found, set output variable `LEX' to `flex' and
     `LEXLIB' to `-lfl', if that library is in a standard place.
     Otherwise set `LEX' to `lex' and `LEXLIB' to `-ll'.

 - Macro: AC_PROG_LN_S
     If `ln -s' works on the current filesystem (the operating system
     and filesystem support symbolic links), set output variable `LN_S'
     to `ln -s', otherwise set it to `ln'.

     If the link is put in a directory other than the current
     directory, its meaning depends on whether `ln' or `ln -s' is used.
     To safely create links using `$(LN_S)', either find out which
     form is used and adjust the arguments, or always invoke `ln' in
     the directory where the link is to be created.

     In other words, it does not work to do
          $(LN_S) foo /x/bar

     Instead, do

          (cd /x && $(LN_S) foo bar)

 - Macro: AC_PROG_RANLIB
     Set output variable `RANLIB' to `ranlib' if `ranlib' is found,
     otherwise to `:' (do nothing).

 - Macro: AC_PROG_YACC
     If `bison' is found, set output variable `YACC' to `bison -y'.
     Otherwise, if `byacc' is found, set `YACC' to `byacc'.  Otherwise
     set `YACC' to `yacc'.


File: autoconf.info,  Node: Generic Programs,  Prev: Particular Programs,  Up: Alternative Programs

Generic Program and File Checks
-------------------------------

   These macros are used to find programs not covered by the particular
test macros.  If you need to check the behavior of a program as well as
find out whether it is present, you have to write your own test for it
(*note Writing Tests::.).  By default, these macros use the environment
variable `PATH'.  If you need to check for a program that might not be
in the user's `PATH', you can pass a modified path to use instead, like
this:

     AC_PATH_PROG(INETD, inetd, /usr/libexec/inetd,
       $PATH:/usr/libexec:/usr/sbin:/usr/etc:etc)

 - Macro: AC_CHECK_FILE (FILE [, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     Check whether file FILE exists on the native system.  If it is
     found, execute ACTION-IF-FOUND, otherwise do ACTION-IF-NOT-FOUND,
     if given.

 - Macro: AC_CHECK_FILES (FILES[, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     Executes `AC_CHECK_FILE' once for each file listed in FILES.
     Additionally, defines `HAVEFILE' for each file found, set to 1.

 - Macro: AC_CHECK_PROG (VARIABLE, PROG-TO-CHECK-FOR, VALUE-IF-FOUND [,
          VALUE-IF-NOT-FOUND [, PATH, [ REJECT ]]])
     Check whether program PROG-TO-CHECK-FOR exists in `PATH'.  If it
     is found, set VARIABLE to VALUE-IF-FOUND, otherwise to
     VALUE-IF-NOT-FOUND, if given.  Always pass over REJECT (an
     absolute file name) even if it is the first found in the search
     path; in that case, set VARIABLE using the absolute file name of
     the PROG-TO-CHECK-FOR found that is not REJECT.  If VARIABLE was
     already set, do nothing.  Calls `AC_SUBST' for VARIABLE.

 - Macro: AC_CHECK_PROGS (VARIABLE, PROGS-TO-CHECK-FOR [,
          VALUE-IF-NOT-FOUND [, PATH]])
     Check for each program in the whitespace-separated list
     PROGS-TO-CHECK-FOR exists in `PATH'.  If it is found, set VARIABLE
     to the name of that program.  Otherwise, continue checking the
     next program in the list.  If none of the programs in the list are
     found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND
     is not specified, the value of VARIABLE is not changed.  Calls
     `AC_SUBST' for VARIABLE.

 - Macro: AC_CHECK_TOOL (VARIABLE, PROG-TO-CHECK-FOR [,
          VALUE-IF-NOT-FOUND [, PATH]])
     Like `AC_CHECK_PROG', but first looks for PROG-TO-CHECK-FOR with a
     prefix of the host type as determined by `AC_CANONICAL_HOST',
     followed by a dash (*note Canonicalizing::.).  For example, if the
     user runs `configure --host=i386-gnu', then this call:
          AC_CHECK_TOOL(RANLIB, ranlib, :)

     sets `RANLIB' to `i386-gnu-ranlib' if that program exists in
     `PATH', or to `ranlib' if that program exists in `PATH', or to `:'
     if neither program exists.

 - Macro: AC_PATH_PROG (VARIABLE, PROG-TO-CHECK-FOR [,
          VALUE-IF-NOT-FOUND [, PATH]])
     Like `AC_CHECK_PROG', but set VARIABLE to the entire path of
     PROG-TO-CHECK-FOR if found.

 - Macro: AC_PATH_PROGS (VARIABLE, PROGS-TO-CHECK-FOR [,
          VALUE-IF-NOT-FOUND [, PATH]])
     Like `AC_CHECK_PROGS', but if any of PROGS-TO-CHECK-FOR are found,
     set VARIABLE to the entire path of the program found.


File: autoconf.info,  Node: Libraries,  Next: Library Functions,  Prev: Alternative Programs,  Up: Existing Tests

Library Files
=============

   The following macros check for the presence of certain C, C++ or
Fortran 77 library archive files.

 - Macro: AC_CHECK_LIB (LIBRARY, FUNCTION [, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND [, OTHER-LIBRARIES]]])
     Depending on the current language(*note Language Choice::.), try to
     ensure that the C, C++ or Fortran 77 function FUNCTION is
     available by checking whether a test program can be linked with the
     library LIBRARY to get the function.  LIBRARY is the base name of
     the library; e.g., to check for `-lmp', use `mp' as the LIBRARY
     argument.

     ACTION-IF-FOUND is a list of shell commands to run if the link
     with the library succeeds; ACTION-IF-NOT-FOUND is a list of shell
     commands to run if the link fails.  If ACTION-IF-FOUND is not
     specified, the default action will add `-lLIBRARY' to `LIBS' and
     define `HAVE_LIBLIBRARY' (in all capitals).

     If linking with LIBRARY results in unresolved symbols, which would
     be resolved by linking with additional libraries, give those
     libraries as the OTHER-LIBRARIES argument, separated by spaces:
     `-lXt -lX11'.  Otherwise this macro will fail to detect that
     LIBRARY is present, because linking the test program will always
     fail with unresolved symbols.

 - Macro: AC_HAVE_LIBRARY (LIBRARY, [, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND [, OTHER-LIBRARIES]]])
     This macro is equivalent to calling `AC_CHECK_LIB' with a FUNCTION
     argument of `main'.  In addition, LIBRARY can be written as any of
     `foo', `-lfoo', or `libfoo.a'.  In all of those cases, the
     compiler is passed `-lfoo'.  However, LIBRARY can not be a shell
     variable; it must be a literal name.  This macro is considered
     obsolete.

 - Macro: AC_SEARCH_LIBS (FUNCTION, SEARCH-LIBS [, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND [, OTHER-LIBRARIES]]])
     Search for a library defining FUNCTION, if it's not already
     available.  This equates to calling `AC_TRY_LINK_FUNC' first with
     no libraries, then for each library listed in SEARCH-LIBS.

     If the function is found, run ACTION-IF-FOUND, otherwise run
     ACTION-IF-NOT-FOUND.

     If linking with LIBRARY results in unresolved symbols, which would
     be resolved by linking with additional libraries, give those
     libraries as the OTHER-LIBRARIES argument, separated by spaces:
     `-lXt -lX11'.  Otherwise this macro will fail to detect that
     FUNCTION is present, because linking the test program will always
     fail with unresolved symbols.

 - Macro: AC_SEARCH_LIBS (FUNCTION, SEARCH-LIBS[, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     This macro is equivalent to calling `AC_TRY_LINK_FUNC' once for
     each library listed in SEARCH-LIBS.  Add `-lLIBRARY' to `LIBS' for
     the first library found to contain FUNCTION, and execute
     ACTION-IF-FOUND.  Otherwise execute ACTION-IF-NOT-FOUND.


File: autoconf.info,  Node: Library Functions,  Next: Header Files,  Prev: Libraries,  Up: Existing Tests

Library Functions
=================

   The following macros check for particular C library functions.  If
there is no macro specifically defined to check for a function you need,
and you don't need to check for any special properties of it, then you
can use one of the general function check macros.

* Menu:

* Particular Functions::        Special handling to find certain functions.
* Generic Functions::           How to find other functions.


File: autoconf.info,  Node: Particular Functions,  Next: Generic Functions,  Prev: Library Functions,  Up: Library Functions

Particular Function Checks
--------------------------

   These macros check for particular C functions--whether they exist,
and in some cases how they respond when given certain arguments.

 - Macro: AC_FUNC_ALLOCA
     Check how to get `alloca'.  Tries to get a builtin version by
     checking for `alloca.h' or the predefined C preprocessor macros
     `__GNUC__' and `_AIX'.  If this macro finds `alloca.h', it defines
     `HAVE_ALLOCA_H'.

     If those attempts fail, it looks for the function in the standard C
     library.  If any of those methods succeed, it defines
     `HAVE_ALLOCA'.  Otherwise, it sets the output variable `ALLOCA' to
     `alloca.o' and defines `C_ALLOCA' (so programs can periodically
     call `alloca(0)' to garbage collect).  This variable is separate
     from `LIBOBJS' so multiple programs can share the value of
     `ALLOCA' without needing to create an actual library, in case only
     some of them use the code in `LIBOBJS'.

     This macro does not try to get `alloca' from the System V R3
     `libPW' or the System V R4 `libucb' because those libraries
     contain some incompatible functions that cause trouble.  Some
     versions do not even contain `alloca' or contain a buggy version.
     If you still want to use their `alloca', use `ar' to extract
     `alloca.o' from them instead of compiling `alloca.c'.

     Source files that use `alloca' should start with a piece of code
     like the following, to declare it properly.  In some versions of
     AIX, the declaration of `alloca' must precede everything else
     except for comments and preprocessor directives.  The `#pragma'
     directive is indented so that pre-ANSI C compilers will ignore it,
     rather than choke on it.

          /* AIX requires this to be the first thing in the file.  */
          #ifndef __GNUC__
          # if HAVE_ALLOCA_H
          #  include <alloca.h>
          # else
          #  ifdef _AIX
           #pragma alloca
          #  else
          #   ifndef alloca /* predefined by HP cc +Olibcalls */
          char *alloca ();
          #   endif
          #  endif
          # endif
          #endif

 - Macro: AC_FUNC_CLOSEDIR_VOID
     If the `closedir' function does not return a meaningful value,
     define `CLOSEDIR_VOID'.  Otherwise, callers ought to check its
     return value for an error indicator.

 - Macro: AC_FUNC_FNMATCH
     If the `fnmatch' function is available and works (unlike the one on
     SunOS 5.4), define `HAVE_FNMATCH'.

 - Macro: AC_FUNC_GETLOADAVG
     Check how to get the system load averages.  If the system has the
     `getloadavg' function, this macro defines `HAVE_GETLOADAVG', and
     adds to `LIBS' any libraries needed to get that function.

     Otherwise, it adds `getloadavg.o' to the output variable
     `LIBOBJS', and possibly defines several other C preprocessor
     macros and output variables:

       1. It defines `SVR4', `DGUX', `UMAX', or `UMAX4_3' if on those
          systems.

       2. If it finds `nlist.h', it defines `NLIST_STRUCT'.

       3. If `struct nlist' has an `n_un' member, it defines
          `NLIST_NAME_UNION'.

       4. If compiling `getloadavg.c' defines `LDAV_PRIVILEGED',
          programs need to be installed specially on this system for
          `getloadavg' to work, and this macro defines
          `GETLOADAVG_PRIVILEGED'.

       5. This macro sets the output variable `NEED_SETGID'.  The value
          is `true' if special installation is required, `false' if not.
          If `NEED_SETGID' is `true', this macro sets `KMEM_GROUP' to
          the name of the group that should own the installed program.

 - Macro: AC_FUNC_GETMNTENT
     Check for `getmntent' in the `sun', `seq', and `gen' libraries,
     for Irix 4, PTX, and Unixware, respectively.  Then, if `getmntent'
     is available, define `HAVE_GETMNTENT'.

 - Macro: AC_FUNC_GETPGRP
     If `getpgrp' takes no argument (the POSIX.1 version), define
     `GETPGRP_VOID'.  Otherwise, it is the BSD version, which takes a
     process ID as an argument.  This macro does not check whether
     `getpgrp' exists at all; if you need to work in that situation,
     first call `AC_CHECK_FUNC' for `getpgrp'.

 - Macro: AC_FUNC_MEMCMP
     If the `memcmp' function is not available, or does not work on
     8-bit data (like the one on SunOS 4.1.3), add `memcmp.o' to output
     variable `LIBOBJS'.

 - Macro: AC_FUNC_MMAP
     If the `mmap' function exists and works correctly, define
     `HAVE_MMAP'.  Only checks private fixed mapping of already-mapped
     memory.

 - Macro: AC_FUNC_SELECT_ARGTYPES
     Determines the correct type to be passed to each of the `select'
     function's arguments, and defines those types in
     `SELECT_TYPE_ARG1', `SELECT_TYPE_ARG234', and `SELECT_TYPE_ARG5'
     respectively.  `SELECT_TYPE_ARG1' defaults to `int',
     `SELECT_TYPE_ARG234' defaults to `int *', and `SELECT_TYPE_ARG5'
     defaults to `struct timeval *'.

 - Macro: AC_FUNC_SETPGRP
     If `setpgrp' takes no argument (the POSIX.1 version), define
     `SETPGRP_VOID'.  Otherwise, it is the BSD version, which takes two
     process ID as arguments.  This macro does not check whether
     `setpgrp' exists at all; if you need to work in that situation,
     first call `AC_CHECK_FUNC' for `setpgrp'.

 - Macro: AC_FUNC_SETVBUF_REVERSED
     If `setvbuf' takes the buffering type as its second argument and
     the buffer pointer as the third, instead of the other way around,
     define `SETVBUF_REVERSED'.  This is the case on System V before
     release 3.

 - Macro: AC_FUNC_STRCOLL
     If the `strcoll' function exists and works correctly, define
     `HAVE_STRCOLL'.  This does a bit more than
     `AC_CHECK_FUNCS(strcoll)', because some systems have incorrect
     definitions of `strcoll', which should not be used.

 - Macro: AC_FUNC_STRFTIME
     Check for `strftime' in the `intl' library, for SCO UNIX.  Then,
     if `strftime' is available, define `HAVE_STRFTIME'.

 - Macro: AC_FUNC_UTIME_NULL
     If `utime(FILE, NULL)' sets FILE's timestamp to the present,
     define `HAVE_UTIME_NULL'.

 - Macro: AC_FUNC_VFORK
     If `vfork.h' is found, define `HAVE_VFORK_H'.  If a working
     `vfork' is not found, define `vfork' to be `fork'.  This macro
     checks for several known errors in implementations of `vfork' and
     considers the system to not have a working `vfork' if it detects
     any of them.  It is not considered to be an implementation error
     if a child's invocation of `signal' modifies the parent's signal
     handler, since child processes rarely change their signal handlers.

 - Macro: AC_FUNC_VPRINTF
     If `vprintf' is found, define `HAVE_VPRINTF'.  Otherwise, if
     `_doprnt' is found, define `HAVE_DOPRNT'.  (If `vprintf' is
     available, you may assume that `vfprintf' and `vsprintf' are also
     available.)

 - Macro: AC_FUNC_WAIT3
     If `wait3' is found and fills in the contents of its third argument
     (a `struct rusage *'), which HP-UX does not do, define
     `HAVE_WAIT3'.


File: autoconf.info,  Node: Generic Functions,  Prev: Particular Functions,  Up: Library Functions

Generic Function Checks
-----------------------

   These macros are used to find functions not covered by the particular
test macros.  If the functions might be in libraries other than the
default C library, first call `AC_CHECK_LIB' for those libraries.  If
you need to check the behavior of a function as well as find out
whether it is present, you have to write your own test for it (*note
Writing Tests::.).

 - Macro: AC_CHECK_FUNC (FUNCTION, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     If C function FUNCTION is available, run shell commands
     ACTION-IF-FOUND, otherwise ACTION-IF-NOT-FOUND.  If you just want
     to define a symbol if the function is available, consider using
     `AC_CHECK_FUNCS' instead.  This macro checks for functions with C
     linkage even when `AC_LANG_CPLUSPLUS' has been called, since C++ is
     more standardized than C is.  (*note Language Choice::., for more
     information about selecting the language for checks.)

 - Macro: AC_CHECK_FUNCS (FUNCTION... [, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     For each given FUNCTION in the whitespace-separated argument list
     that is available, define `HAVE_FUNCTION' (in all capitals).  If
     ACTION-IF-FOUND is given, it is additional shell code to execute
     when one of the functions is found.  You can give it a value of
     `break' to break out of the loop on the first match.  If
     ACTION-IF-NOT-FOUND is given, it is executed when one of the
     functions is not found.

 - Macro: AC_REPLACE_FUNCS (FUNCTION...)
     Like calling `AC_CHECK_FUNCS' using an ACTION-IF-NOT-FOUND that
     adds `FUNCTION.o' to the value of the output variable `LIBOBJS'.
     You can declare a function for which your replacement version is
     used by enclosing the prototype in `#ifndef HAVE_FUNCTION'.  If
     the system has the function, it probably declares it in a header
     file you should be including, so you shouldn't redeclare it, lest
     your declaration conflict.


File: autoconf.info,  Node: Header Files,  Next: Structures,  Prev: Library Functions,  Up: Existing Tests

Header Files
============

   The following macros check for the presence of certain C header
files.  If there is no macro specifically defined to check for a header
file you need, and you don't need to check for any special properties of
it, then you can use one of the general header file check macros.

* Menu:

* Particular Headers::          Special handling to find certain headers.
* Generic Headers::             How to find other headers.


File: autoconf.info,  Node: Particular Headers,  Next: Generic Headers,  Prev: Header Files,  Up: Header Files

Particular Header Checks
------------------------

   These macros check for particular system header files--whether they
exist, and in some cases whether they declare certain symbols.

 - Macro: AC_DECL_SYS_SIGLIST
     Define `SYS_SIGLIST_DECLARED' if the variable `sys_siglist' is
     declared in a system header file, either `signal.h' or `unistd.h'.

 - Macro: AC_DIR_HEADER
     Like calling `AC_HEADER_DIRENT' and `AC_FUNC_CLOSEDIR_VOID', but
     defines a different set of C preprocessor macros to indicate which
     header file is found.  This macro and the names it defines are
     considered obsolete.  The names it defines are:

    `dirent.h'
          `DIRENT'

    `sys/ndir.h'
          `SYSNDIR'

    `sys/dir.h'
          `SYSDIR'

    `ndir.h'
          `NDIR'

     In addition, if the `closedir' function does not return a
     meaningful value, define `VOID_CLOSEDIR'.

 - Macro: AC_HEADER_DIRENT
     Check for the following header files, and for the first one that is
     found and defines `DIR', define the listed C preprocessor macro:

    `dirent.h'
          `HAVE_DIRENT_H'

    `sys/ndir.h'
          `HAVE_SYS_NDIR_H'

    `sys/dir.h'
          `HAVE_SYS_DIR_H'

    `ndir.h'
          `HAVE_NDIR_H'

     The directory library declarations in the source code should look
     something like the following:

          #if HAVE_DIRENT_H
          # include <dirent.h>
          # define NAMLEN(dirent) strlen((dirent)->d_name)
          #else
          # define dirent direct
          # define NAMLEN(dirent) (dirent)->d_namlen
          # if HAVE_SYS_NDIR_H
          #  include <sys/ndir.h>
          # endif
          # if HAVE_SYS_DIR_H
          #  include <sys/dir.h>
          # endif
          # if HAVE_NDIR_H
          #  include <ndir.h>
          # endif
          #endif

     Using the above declarations, the program would declare variables
     to be type `struct dirent', not `struct direct', and would access
     the length of a directory entry name by passing a pointer to a
     `struct dirent' to the `NAMLEN' macro.

     This macro also checks for the SCO Xenix `dir' and `x' libraries.

 - Macro: AC_HEADER_MAJOR
     If `sys/types.h' does not define `major', `minor', and `makedev',
     but `sys/mkdev.h' does, define `MAJOR_IN_MKDEV'; otherwise, if
     `sys/sysmacros.h' does, define `MAJOR_IN_SYSMACROS'.

 - Macro: AC_HEADER_STDC
     Define `STDC_HEADERS' if the system has ANSI C header files.
     Specifically, this macro checks for `stdlib.h', `stdarg.h',
     `string.h', and `float.h'; if the system has those, it probably
     has the rest of the ANSI C header files.  This macro also checks
     whether `string.h' declares `memchr' (and thus presumably the
     other `mem' functions), whether `stdlib.h' declare `free' (and
     thus presumably `malloc' and other related functions), and whether
     the `ctype.h' macros work on characters with the high bit set, as
     ANSI C requires.

     Use `STDC_HEADERS' instead of `__STDC__' to determine whether the
     system has ANSI-compliant header files (and probably C library
     functions) because many systems that have GCC do not have ANSI C
     header files.

     On systems without ANSI C headers, there is so much variation that
     it is probably easier to declare the functions you use than to
     figure out exactly what the system header files declare.  Some
     systems contain a mix of functions ANSI and BSD; some are mostly
     ANSI but lack `memmove'; some define the BSD functions as macros in
     `string.h' or `strings.h'; some have only the BSD functions but
     `string.h'; some declare the memory functions in `memory.h', some
     in `string.h'; etc.  It is probably sufficient to check for one
     string function and one memory function; if the library has the
     ANSI versions of those then it probably has most of the others.
     If you put the following in `configure.in':

          AC_HEADER_STDC
          AC_CHECK_FUNCS(strchr memcpy)

     then, in your code, you can put declarations like this:

          #if STDC_HEADERS
          # include <string.h>
          #else
          # ifndef HAVE_STRCHR
          #  define strchr index
          #  define strrchr rindex
          # endif
          char *strchr (), *strrchr ();
          # ifndef HAVE_MEMCPY
          #  define memcpy(d, s, n) bcopy ((s), (d), (n))
          #  define memmove(d, s, n) bcopy ((s), (d), (n))
          # endif
          #endif

     If you use a function like `memchr', `memset', `strtok', or
     `strspn', which have no BSD equivalent, then macros won't suffice;
     you must provide an implementation of each function.  An easy way
     to incorporate your implementations only when needed (since the
     ones in system C libraries may be hand optimized) is to, taking
     `memchr' for example, put it in `memchr.c' and use
     `AC_REPLACE_FUNCS(memchr)'.

 - Macro: AC_HEADER_SYS_WAIT
     If `sys/wait.h' exists and is compatible with POSIX.1, define
     `HAVE_SYS_WAIT_H'.  Incompatibility can occur if `sys/wait.h' does
     not exist, or if it uses the old BSD `union wait' instead of `int'
     to store a status value.  If `sys/wait.h' is not POSIX.1
     compatible, then instead of including it, define the POSIX.1
     macros with their usual interpretations.  Here is an example:

          #include <sys/types.h>
          #if HAVE_SYS_WAIT_H
          # include <sys/wait.h>
          #endif
          #ifndef WEXITSTATUS
          # define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
          #endif
          #ifndef WIFEXITED
          # define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
          #endif

 - Macro: AC_MEMORY_H
     Define `NEED_MEMORY_H' if `memcpy', `memcmp', etc. are not
     declared in `string.h' and `memory.h' exists.  This macro is
     obsolete; instead, use `AC_CHECK_HEADERS(memory.h)'.  See the
     example for `AC_HEADER_STDC'.

 - Macro: AC_UNISTD_H
     Define `HAVE_UNISTD_H' if the system has `unistd.h'.  This macro
     is obsolete; instead, use `AC_CHECK_HEADERS(unistd.h)'.

     The way to check if the system supports POSIX.1 is:

          #if HAVE_UNISTD_H
          # include <sys/types.h>
          # include <unistd.h>
          #endif
          
          #ifdef _POSIX_VERSION
          /* Code for POSIX.1 systems.  */
          #endif

     `_POSIX_VERSION' is defined when `unistd.h' is included on POSIX.1
     systems.  If there is no `unistd.h', it is definitely not a
     POSIX.1 system.  However, some non-POSIX.1 systems do have
     `unistd.h'.

 - Macro: AC_USG
     Define `USG' if the system does not have `strings.h', `rindex',
     `bzero', etc.  This implies that it has `string.h', `strrchr',
     `memset', etc.

     The symbol `USG' is obsolete.  Instead of this macro, see the
     example for `AC_HEADER_STDC'.


File: autoconf.info,  Node: Generic Headers,  Prev: Particular Headers,  Up: Header Files

Generic Header Checks
---------------------

   These macros are used to find system header files not covered by the
particular test macros.  If you need to check the contents of a header
as well as find out whether it is present, you have to write your own
test for it (*note Writing Tests::.).

 - Macro: AC_CHECK_HEADER (HEADER-FILE, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     If the system header file HEADER-FILE exists, execute shell
     commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND.
     If you just want to define a symbol if the header file is
     available, consider using `AC_CHECK_HEADERS' instead.

 - Macro: AC_CHECK_HEADERS (HEADER-FILE... [, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     For each given system header file HEADER-FILE in the
     whitespace-separated argument list that exists, define
     `HAVE_HEADER-FILE' (in all capitals).  If ACTION-IF-FOUND is
     given, it is additional shell code to execute when one of the
     header files is found.  You can give it a value of `break' to
     break out of the loop on the first match.  If ACTION-IF-NOT-FOUND
     is given, it is executed when one of the header files is not found.


File: autoconf.info,  Node: Structures,  Next: Typedefs,  Prev: Header Files,  Up: Existing Tests

Structures
==========

   The following macros check for certain structures or structure
members.  To check structures not listed here, use `AC_EGREP_CPP'
(*note Examining Declarations::.) or `AC_TRY_COMPILE' (*note Examining
Syntax::.).

 - Macro: AC_HEADER_STAT
     If the macros `S_ISDIR', `S_ISREG' et al. defined in `sys/stat.h'
     do not work properly (returning false positives), define
     `STAT_MACROS_BROKEN'.  This is the case on Tektronix UTekV, Amdahl
     UTS and Motorola System V/88.

 - Macro: AC_HEADER_TIME
     If a program may include both `time.h' and `sys/time.h', define
     `TIME_WITH_SYS_TIME'.  On some older systems, `sys/time.h'
     includes `time.h', but `time.h' is not protected against multiple
     inclusion, so programs should not explicitly include both files.
     This macro is useful in programs that use, for example, `struct
     timeval' or `struct timezone' as well as `struct tm'.  It is best
     used in conjunction with `HAVE_SYS_TIME_H', which can be checked
     for using `AC_CHECK_HEADERS(sys/time.h)'.

          #if TIME_WITH_SYS_TIME
          # include <sys/time.h>
          # include <time.h>
          #else
          # if HAVE_SYS_TIME_H
          #  include <sys/time.h>
          # else
          #  include <time.h>
          # endif
          #endif

 - Macro: AC_STRUCT_ST_BLKSIZE
     If `struct stat' contains an `st_blksize' member, define
     `HAVE_ST_BLKSIZE'.

 - Macro: AC_STRUCT_ST_BLOCKS
     If `struct stat' contains an `st_blocks' member, define
     `HAVE_ST_BLOCKS'.  Otherwise, add `fileblocks.o' to the output
     variable `LIBOBJS'.

 - Macro: AC_STRUCT_ST_RDEV
     If `struct stat' contains an `st_rdev' member, define
     `HAVE_ST_RDEV'.

 - Macro: AC_STRUCT_TM
     If `time.h' does not define `struct tm', define `TM_IN_SYS_TIME',
     which means that including `sys/time.h' had better define `struct
     tm'.

 - Macro: AC_STRUCT_TIMEZONE
     Figure out how to get the current timezone.  If `struct tm' has a
     `tm_zone' member, define `HAVE_TM_ZONE'.  Otherwise, if the
     external array `tzname' is found, define `HAVE_TZNAME'.


File: autoconf.info,  Node: Typedefs,  Next: C Compiler Characteristics,  Prev: Structures,  Up: Existing Tests

Typedefs
========

   The following macros check for C typedefs.  If there is no macro
specifically defined to check for a typedef you need, and you don't need
to check for any special properties of it, then you can use a general
typedef check macro.

* Menu:

* Particular Typedefs::         Special handling to find certain types.
* Generic Typedefs::            How to find other types.


File: autoconf.info,  Node: Particular Typedefs,  Next: Generic Typedefs,  Prev: Typedefs,  Up: Typedefs

Particular Typedef Checks
-------------------------

   These macros check for particular C typedefs in `sys/types.h' and
`stdlib.h' (if it exists).

 - Macro: AC_TYPE_GETGROUPS
     Define `GETGROUPS_T' to be whichever of `gid_t' or `int' is the
     base type of the array argument to `getgroups'.

 - Macro: AC_TYPE_MODE_T
     If `mode_t' is not defined, define `mode_t' to be `int'.

 - Macro: AC_TYPE_OFF_T
     If `off_t' is not defined, define `off_t' to be `long'.

 - Macro: AC_TYPE_PID_T
     If `pid_t' is not defined, define `pid_t' to be `int'.

 - Macro: AC_TYPE_SIGNAL
     If `signal.h' declares `signal' as returning a pointer to a
     function returning `void', define `RETSIGTYPE' to be `void';
     otherwise, define it to be `int'.

     Define signal handlers as returning type `RETSIGTYPE':

          RETSIGTYPE
          hup_handler ()
          {
          ...
          }

 - Macro: AC_TYPE_SIZE_T
     If `size_t' is not defined, define `size_t' to be `unsigned'.

 - Macro: AC_TYPE_UID_T
     If `uid_t' is not defined, define `uid_t' to be `int' and `gid_t'
     to be `int'.


File: autoconf.info,  Node: Generic Typedefs,  Prev: Particular Typedefs,  Up: Typedefs

Generic Typedef Checks
----------------------

   This macro is used to check for typedefs not covered by the
particular test macros.

 - Macro: AC_CHECK_TYPE (TYPE, DEFAULT)
     If the type TYPE is not defined in `sys/types.h', or `stdlib.h' or
     `stddef.h' if they exist, define it to be the C (or C++) builtin
     type DEFAULT; e.g., `short' or `unsigned'.


File: autoconf.info,  Node: C Compiler Characteristics,  Next: Fortran 77 Compiler Characteristics,  Prev: Typedefs,  Up: Existing Tests

C Compiler Characteristics
==========================

   The following macros check for C compiler or machine architecture
features.  To check for characteristics not listed here, use
`AC_TRY_COMPILE' (*note Examining Syntax::.) or `AC_TRY_RUN' (*note Run
Time::.)

 - Macro: AC_C_BIGENDIAN
     If words are stored with the most significant byte first (like
     Motorola and SPARC, but not Intel and VAX, CPUs), define
     `WORDS_BIGENDIAN'.

 - Macro: AC_C_CONST
     If the C compiler does not fully support the keyword `const',
     define `const' to be empty.  Some C compilers that do not define
     `__STDC__' do support `const'; some compilers that define
     `__STDC__' do not completely support `const'.  Programs can simply
     use `const' as if every C compiler supported it; for those that
     don't, the `Makefile' or configuration header file will define it
     as empty.

 - Macro: AC_C_INLINE
     If the C compiler supports the keyword `inline', do nothing.
     Otherwise define `inline' to `__inline__' or `__inline' if it
     accepts one of those, otherwise define `inline' to be empty.

 - Macro: AC_C_CHAR_UNSIGNED
     If the C type `char' is unsigned, define `__CHAR_UNSIGNED__',
     unless the C compiler predefines it.

 - Macro: AC_C_LONG_DOUBLE
     If the C compiler supports the `long double' type, define
     `HAVE_LONG_DOUBLE'.  Some C compilers that do not define
     `__STDC__' do support the `long double' type; some compilers that
     define `__STDC__' do not support `long double'.

 - Macro: AC_C_STRINGIZE
     If the C preprocessor supports the stringizing operator, define
     `HAVE_STRINGIZE'.  The stringizing operator is `#' and is found in
     macros such as this:

          #define x(y) #y

 - Macro: AC_CHECK_SIZEOF (TYPE [, CROSS-SIZE])
     Define `SIZEOF_UCTYPE' to be the size in bytes of the C (or C++)
     builtin type TYPE, e.g. `int' or `char *'.  If `type' is unknown
     to the compiler, it gets a size of 0.  UCTYPE is TYPE, with
     lowercase converted to uppercase, spaces changed to underscores,
     and asterisks changed to `P'.  If cross-compiling, the value
     CROSS-SIZE is used if given, otherwise `configure' exits with an
     error message.

     For example, the call
          AC_CHECK_SIZEOF(int *)

     defines `SIZEOF_INT_P' to be 8 on DEC Alpha AXP systems.

 - Macro: AC_INT_16_BITS
     If the C type `int' is 16 bits wide, define `INT_16_BITS'.  This
     macro is obsolete; it is more general to use
     `AC_CHECK_SIZEOF(int)' instead.

 - Macro: AC_LONG_64_BITS
     If the C type `long int' is 64 bits wide, define `LONG_64_BITS'.
     This macro is obsolete; it is more general to use
     `AC_CHECK_SIZEOF(long)' instead.


File: autoconf.info,  Node: Fortran 77 Compiler Characteristics,  Next: System Services,  Prev: C Compiler Characteristics,  Up: Existing Tests

Fortran 77 Compiler Characteristics
===================================

   The following macros check for Fortran 77 compiler characteristics.
To check for characteristics not listed here, use `AC_TRY_COMPILE'
(*note Examining Syntax::.) or `AC_TRY_RUN' (*note Run Time::.), making
sure to first set the current lanuage to Fortran 77 `AC_LANG_FORTRAN77'
(*note Language Choice::.).

 - Macro: AC_F77_LIBRARY_LDFLAGS
     Determine the linker flags (e.g. `-L' and `-l') for the "Fortran
     77 intrinsic and run-time libraries" that are required to
     successfully link a Fortran 77 program or shared library.  The
     output variable `FLIBS' is set to these flags.

     This macro is intended to be used in those situations when it is
     necessary to mix, e.g. C++ and Fortran 77 source code into a single
     program or shared library (*note Mixing Fortran 77 With C and C++:
     (automake)Mixing Fortran 77 With C and C++.).

     For example, if object files from a C++ and Fortran 77 compiler
     must be linked together, then the C++ compiler/linker must be used
     for linking (since special C++-ish things need to happen at link
     time like calling global constructors, instantiating templates,
     enabling exception support, etc.).

     However, the Fortran 77 intrinsic and run-time libraries must be
     linked in as well, but the C++ compiler/linker doesn't know by
     default how to add these Fortran 77 libraries.  Hence, the macro
     `AC_F77_LIBRARY_LDFLAGS' was created to determine these Fortran 77
     libraries.


File: autoconf.info,  Node: System Services,  Next: UNIX Variants,  Prev: Fortran 77 Compiler Characteristics,  Up: Existing Tests

System Services
===============

   The following macros check for operating system services or
capabilities.

 - Macro: AC_CYGWIN
     Checks for the Cygwin environment.  If present, sets shell variable
     `CYGWIN' to `yes'.  If not present, sets `CYGWIN' to the empty
     string.

 - Macro: AC_EXEEXT
     Defines substitute variable `EXEEXT' based on the output of the
     compiler, after .c, .o, and .obj files have been excluded.
     Typically set to empty string if Unix, `.exe' or `.EXE' if Win32.

 - Macro: AC_OBJEXT
     Defines substitute variable `OBJEXT' based on the output of the
     compiler, after .c files have been excluded.  Typically set to
     `.o' if Unix, `.obj' if Win32.

 - Macro: AC_MINGW32
     Checks for the MingW32 compiler environment.  If present, sets
     shell variable `MINGW32' to `yes'.  If not present, sets `MINGW32'
     to the empty string.

 - Macro: AC_PATH_X
     Try to locate the X Window System include files and libraries.  If
     the user gave the command line options `--x-includes=DIR' and
     `--x-libraries=DIR', use those directories.  If either or both
     were not given, get the missing values by running `xmkmf' on a
     trivial `Imakefile' and examining the `Makefile' that it produces.
     If that fails (such as if `xmkmf' is not present), look for them
     in several directories where they often reside.  If either method
     is successful, set the shell variables `x_includes' and
     `x_libraries' to their locations, unless they are in directories
     the compiler searches by default.

     If both methods fail, or the user gave the command line option
     `--without-x', set the shell variable `no_x' to `yes'; otherwise
     set it to the empty string.

 - Macro: AC_PATH_XTRA
     An enhanced version of `AC_PATH_X'.  It adds the C compiler flags
     that X needs to output variable `X_CFLAGS', and the X linker flags
     to `X_LIBS'.  If X is not available, adds `-DX_DISPLAY_MISSING' to
     `X_CFLAGS'.

     This macro also checks for special libraries that some systems
     need in order to compile X programs.  It adds any that the system
     needs to output variable `X_EXTRA_LIBS'.  And it checks for
     special X11R6 libraries that need to be linked with before
     `-lX11', and adds any found to the output variable `X_PRE_LIBS'.


 - Macro: AC_SYS_INTERPRETER
     Check whether the system supports starting scripts with a line of
     the form `#! /bin/csh' to select the interpreter to use for the
     script.  After running this macro, shell code in `configure.in'
     can check the shell variable `interpval'; it will be set to `yes'
     if the system supports `#!', `no' if not.

 - Macro: AC_SYS_LONG_FILE_NAMES
     If the system supports file names longer than 14 characters, define
     `HAVE_LONG_FILE_NAMES'.

 - Macro: AC_SYS_RESTARTABLE_SYSCALLS
     If the system automatically restarts a system call that is
     interrupted by a signal, define `HAVE_RESTARTABLE_SYSCALLS'.


File: autoconf.info,  Node: UNIX Variants,  Prev: System Services,  Up: Existing Tests

UNIX Variants
=============

   The following macros check for certain operating systems that need
special treatment for some programs, due to exceptional oddities in
their header files or libraries.  These macros are warts; they will be
replaced by a more systematic approach, based on the functions they make
available or the environments they provide.

 - Macro: AC_AIX
     If on AIX, define `_ALL_SOURCE'.  Allows the use of some BSD
     functions.  Should be called before any macros that run the C
     compiler.

 - Macro: AC_DYNIX_SEQ
     If on Dynix/PTX (Sequent UNIX), add `-lseq' to output variable
     `LIBS'.  This macro is obsolete; instead, use `AC_FUNC_GETMNTENT'.

 - Macro: AC_IRIX_SUN
     If on IRIX (Silicon Graphics UNIX), add `-lsun' to output variable
     `LIBS'.  This macro is obsolete.  If you were using it to get
     `getmntent', use `AC_FUNC_GETMNTENT' instead.  If you used it for
     the NIS versions of the password and group functions, use
     `AC_CHECK_LIB(sun, getpwnam)'.

 - Macro: AC_ISC_POSIX
     If on a POSIXized ISC UNIX, define `_POSIX_SOURCE' and add
     `-posix' (for the GNU C compiler) or `-Xp' (for other C compilers)
     to output variable `CC'.  This allows the use of POSIX facilities.
     Must be called after `AC_PROG_CC' and before any other macros
     that run the C compiler.

 - Macro: AC_MINIX
     If on Minix, define `_MINIX' and `_POSIX_SOURCE' and define
     `_POSIX_1_SOURCE' to be 2.  This allows the use of POSIX
     facilities.  Should be called before any macros that run the C
     compiler.

 - Macro: AC_SCO_INTL
     If on SCO UNIX, add `-lintl' to output variable `LIBS'.  This
     macro is obsolete; instead, use `AC_FUNC_STRFTIME'.

 - Macro: AC_XENIX_DIR
     If on Xenix, add `-lx' to output variable `LIBS'.  Also, if
     `dirent.h' is being used, add `-ldir' to `LIBS'.  This macro is
     obsolete; use `AC_HEADER_DIRENT' instead.


File: autoconf.info,  Node: Writing Tests,  Next: Results,  Prev: Existing Tests,  Up: Top

Writing Tests
*************

   If the existing feature tests don't do something you need, you have
to write new ones.  These macros are the building blocks.  They provide
ways for other macros to check whether various kinds of features are
available and report the results.

   This chapter contains some suggestions and some of the reasons why
the existing tests are written the way they are.  You can also learn a
lot about how to write Autoconf tests by looking at the existing ones.
If something goes wrong in one or more of the Autoconf tests, this
information can help you understand the assumptions behind them, which
might help you figure out how to best solve the problem.

   These macros check the output of the C compiler system.  They do not
cache the results of their tests for future use (*note Caching
Results::.), because they don't know enough about the information they
are checking for to generate a cache variable name.  They also do not
print any messages, for the same reason.  The checks for particular
kinds of C features call these macros and do cache their results and
print messages about what they're checking for.

   When you write a feature test that could be applicable to more than
one software package, the best thing to do is encapsulate it in a new
macro.  *Note Writing Macros::, for how to do that.

* Menu:

* Examining Declarations::      Detecting header files and declarations.
* Examining Syntax::            Detecting language syntax features.
* Examining Libraries::         Detecting functions and global variables.
* Run Time::                    Testing for run-time features.
* Portable Shell::              Shell script portability pitfalls.
* Testing Values and Files::    Checking strings and files.
* Multiple Cases::              Tests for several possible values.
* Language Choice::             Selecting which language to use for testing.


File: autoconf.info,  Node: Examining Declarations,  Next: Examining Syntax,  Prev: Writing Tests,  Up: Writing Tests

Examining Declarations
======================

   The macro `AC_TRY_CPP' is used to check whether particular header
files exist.  You can check for one at a time, or more than one if you
need several header files to all exist for some purpose.

 - Macro: AC_TRY_CPP (INCLUDES, [ACTION-IF-TRUE [, ACTION-IF-FALSE]])
     INCLUDES is C or C++ `#include' statements and declarations, on
     which shell variable, backquote, and backslash substitutions are
     performed.  (Actually, it can be any C program, but other
     statements are probably not useful.)  If the preprocessor produces
     no error messages while processing it, run shell commands
     ACTION-IF-TRUE.  Otherwise run shell commands ACTION-IF-FALSE.

     This macro uses `CPPFLAGS', but not `CFLAGS', because `-g', `-O',
     etc. are not valid options to many C preprocessors.

   Here is how to find out whether a header file contains a particular
declaration, such as a typedef, a structure, a structure member, or a
function.  Use `AC_EGREP_HEADER' instead of running `grep' directly on
the header file; on some systems the symbol might be defined in another
header file that the file you are checking `#include's.

 - Macro: AC_EGREP_HEADER (PATTERN, HEADER-FILE, ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND])
     If the output of running the preprocessor on the system header file
     HEADER-FILE matches the `egrep' regular expression PATTERN,
     execute shell commands ACTION-IF-FOUND, otherwise execute
     ACTION-IF-NOT-FOUND.

   To check for C preprocessor symbols, either defined by header files
or predefined by the C preprocessor, use `AC_EGREP_CPP'.  Here is an
example of the latter:

     AC_EGREP_CPP(yes,
     [#ifdef _AIX
       yes
     #endif
     ], is_aix=yes, is_aix=no)

 - Macro: AC_EGREP_CPP (PATTERN, PROGRAM, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     PROGRAM is the text of a C or C++ program, on which shell
     variable, backquote, and backslash substitutions are performed.
     If the output of running the preprocessor on PROGRAM matches the
     `egrep' regular expression PATTERN, execute shell commands
     ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND.

     This macro calls `AC_PROG_CPP' or `AC_PROG_CXXCPP' (depending on
     which language is current, *note Language Choice::.), if it hasn't
     been called already.


File: autoconf.info,  Node: Examining Syntax,  Next: Examining Libraries,  Prev: Examining Declarations,  Up: Writing Tests

Examining Syntax
================

   To check for a syntax feature of the C, C++ or Fortran 77 compiler,
such as whether it recognizes a certain keyword, use `AC_TRY_COMPILE' to
try to compile a small program that uses that feature.  You can also use
it to check for structures and structure members that are not present on
all systems.

 - Macro: AC_TRY_COMPILE (INCLUDES, FUNCTION-BODY, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     Create a C, C++ or Fortran 77 test program (depending on which
     language is current, *note Language Choice::.), to see whether a
     function whose body consists of FUNCTION-BODY can be compiled.

     For C and C++, INCLUDES is any `#include' statements needed by the
     code in FUNCTION-BODY (INCLUDES will be ignored if the currently
     selected language is Fortran 77).  This macro also uses `CFLAGS'
     or `CXXFLAGS' if either C or C++ is the currently selected
     language, as well as `CPPFLAGS', when compiling.  If Fortran 77 is
     the currently selected language then `FFLAGS' will be used when
     compiling.

     If the file compiles successfully, run shell commands
     ACTION-IF-FOUND, otherwise run ACTION-IF-NOT-FOUND.

     This macro does not try to link; use `AC_TRY_LINK' if you need to
     do that (*note Examining Libraries::.).


File: autoconf.info,  Node: Examining Libraries,  Next: Run Time,  Prev: Examining Syntax,  Up: Writing Tests

Examining Libraries
===================

   To check for a library, a function, or a global variable, Autoconf
`configure' scripts try to compile and link a small program that uses
it.  This is unlike Metaconfig, which by default uses `nm' or `ar' on
the C library to try to figure out which functions are available.
Trying to link with the function is usually a more reliable approach
because it avoids dealing with the variations in the options and output
formats of `nm' and `ar' and in the location of the standard libraries.
It also allows configuring for cross-compilation or checking a
function's runtime behavior if needed.  On the other hand, it can be
slower than scanning the libraries once.

   A few systems have linkers that do not return a failure exit status
when there are unresolved functions in the link.  This bug makes the
configuration scripts produced by Autoconf unusable on those systems.
However, some of them can be given options that make the exit status
correct.  This is a problem that Autoconf does not currently handle
automatically.  If users encounter this problem, they might be able to
solve it by setting `LDFLAGS' in the environment to pass whatever
options the linker needs (for example, `-Wl,-dn' on MIPS RISC/OS).

   `AC_TRY_LINK' is used to compile test programs to test for functions
and global variables.  It is also used by `AC_CHECK_LIB' to check for
libraries (*note Libraries::.), by adding the library being checked for
to `LIBS' temporarily and trying to link a small program.

 - Macro: AC_TRY_LINK (INCLUDES, FUNCTION-BODY, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     Depending on the current language (*note Language Choice::.),
     create a test program to see whether a function whose body
     consists of FUNCTION-BODY can be compiled and linked.

     For C and C++, INCLUDES is any `#include' statements needed by the
     code in FUNCTION-BODY (INCLUDES will be ignored if the currently
     selected language is Fortran 77).  This macro also uses `CFLAGS'
     or `CXXFLAGS' if either C or C++ is the currently selected
     language, as well as `CPPFLAGS', when compiling.  If Fortran 77 is
     the currently selected language then `FFLAGS' will be used when
     compiling.  However, both `LDFLAGS' and `LIBS' will be used during
     linking in all cases.

     If the file compiles and links successfully, run shell commands
     ACTION-IF-FOUND, otherwise run ACTION-IF-NOT-FOUND.

 - Macro: AC_TRY_LINK_FUNC (FUNCTION, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     Depending on the current language (*note Language Choice::.),
     create a test program to see whether a program whose body consists
     of a prototype of and a call to FUNCTION can be compiled and
     linked.

     If the file compiles and links successfully, run shell commands
     ACTION-IF-FOUND, otherwise run ACTION-IF-NOT-FOUND.

 - Macro: AC_TRY_LINK_FUNC (FUNCTION, [ACTION-IF-FOUND [,
          ACTION-IF-NOT-FOUND]])
     Attempt to compile and link a small program that links with
     FUNCTION.  If the file compiles and links successfully, run shell
     commands ACTION-IF-FOUND, otherwise run ACTION-IF-NOT-FOUND.

 - Macro: AC_COMPILE_CHECK (ECHO-TEXT, INCLUDES, FUNCTION-BODY,
          ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND])
     This is an obsolete version of `AC_TRY_LINK', with the addition
     that it prints `checking for ECHO-TEXT' to the standard output
     first, if ECHO-TEXT is non-empty.  Use `AC_MSG_CHECKING' and
     `AC_MSG_RESULT' instead to print messages (*note Printing
     Messages::.).


File: autoconf.info,  Node: Run Time,  Next: Portable Shell,  Prev: Examining Libraries,  Up: Writing Tests

Checking Run Time Behavior
==========================

   Sometimes you need to find out how a system performs at run time,
such as whether a given function has a certain capability or bug.  If
you can, make such checks when your program runs instead of when it is
configured.  You can check for things like the machine's endianness when
your program initializes itself.

   If you really need to test for a run-time behavior while configuring,
you can write a test program to determine the result, and compile and
run it using `AC_TRY_RUN'.  Avoid running test programs if possible,
because using them prevents people from configuring your package for
cross-compiling.

* Menu:

* Test Programs::               Running test programs.
* Guidelines::                  General rules for writing test programs.
* Test Functions::              Avoiding pitfalls in test programs.


File: autoconf.info,  Node: Test Programs,  Next: Guidelines,  Prev: Run Time,  Up: Run Time

Running Test Programs
---------------------

   Use the following macro if you need to test run-time behavior of the
system while configuring.

 - Macro: AC_TRY_RUN (PROGRAM, [ACTION-IF-TRUE [, ACTION-IF-FALSE [,
          ACTION-IF-CROSS-COMPILING]]])
     PROGRAM is the text of a C program, on which shell variable and
     backquote substitutions are performed.  If it compiles and links
     successfully and returns an exit status of 0 when executed, run
     shell commands ACTION-IF-TRUE.  Otherwise run shell commands
     ACTION-IF-FALSE; the exit status of the program is available in
     the shell variable `$?'.  This macro uses `CFLAGS' or `CXXFLAGS',
     `CPPFLAGS', `LDFLAGS', and `LIBS' when compiling.

     If the C compiler being used does not produce executables that run
     on the system where `configure' is being run, then the test
     program is not run.  If the optional shell commands
     ACTION-IF-CROSS-COMPILING are given, they are run instead.
     Otherwise, `configure' prints an error message and exits.

   Try to provide a pessimistic default value to use when
cross-compiling makes run-time tests impossible.  You do this by
passing the optional last argument to `AC_TRY_RUN'.  `autoconf' prints
a warning message when creating `configure' each time it encounters a
call to `AC_TRY_RUN' with no ACTION-IF-CROSS-COMPILING argument given.
You may ignore the warning, though users will not be able to configure
your package for cross-compiling.  A few of the macros distributed with
Autoconf produce this warning message.

   To configure for cross-compiling you can also choose a value for
those parameters based on the canonical system name (*note Manual
Configuration::.).  Alternatively, set up a test results cache file with
the correct values for the target system (*note Caching Results::.).

   To provide a default for calls of `AC_TRY_RUN' that are embedded in
other macros, including a few of the ones that come with Autoconf, you
can call `AC_PROG_CC' before running them.  Then, if the shell variable
`cross_compiling' is set to `yes', use an alternate method to get the
results instead of calling the macros.

 - Macro: AC_C_CROSS
     This macro is obsolete; it does nothing.


File: autoconf.info,  Node: Guidelines,  Next: Test Functions,  Prev: Test Programs,  Up: Run Time

Guidelines for Test Programs
----------------------------

   Test programs should not write anything to the standard output.  They
should return 0 if the test succeeds, nonzero otherwise, so that success
can be distinguished easily from a core dump or other failure;
segmentation violations and other failures produce a nonzero exit
status.  Test programs should `exit', not `return', from `main',
because on some systems (old Suns, at least) the argument to `return'
in `main' is ignored.

   Test programs can use `#if' or `#ifdef' to check the values of
preprocessor macros defined by tests that have already run.  For
example, if you call `AC_HEADER_STDC', then later on in `configure.in'
you can have a test program that includes an ANSI C header file
conditionally:

     #if STDC_HEADERS
     # include <stdlib.h>
     #endif

   If a test program needs to use or create a data file, give it a name
that starts with `conftest', such as `conftestdata'.  The `configure'
script cleans up by running `rm -rf conftest*' after running test
programs and if the script is interrupted.


File: autoconf.info,  Node: Test Functions,  Prev: Guidelines,  Up: Run Time

Test Functions
--------------

   Function declarations in test programs should have a prototype
conditionalized for C++.  In practice, though, test programs rarely need
functions that take arguments.

     #ifdef __cplusplus
     foo(int i)
     #else
     foo(i) int i;
     #endif

   Functions that test programs declare should also be conditionalized
for C++, which requires `extern "C"' prototypes.  Make sure to not
include any header files containing clashing prototypes.

     #ifdef __cplusplus
     extern "C" void *malloc(size_t);
     #else
     char *malloc();
     #endif

   If a test program calls a function with invalid parameters (just to
see whether it exists), organize the program to ensure that it never
invokes that function.  You can do this by calling it in another
function that is never invoked.  You can't do it by putting it after a
call to `exit', because GCC version 2 knows that `exit' never returns
and optimizes out any code that follows it in the same block.

   If you include any header files, make sure to call the functions
relevant to them with the correct number of arguments, even if they are
just 0, to avoid compilation errors due to prototypes.  GCC version 2
has internal prototypes for several functions that it automatically
inlines; for example, `memcpy'.  To avoid errors when checking for
them, either pass them the correct number of arguments or redeclare them
with a different return type (such as `char').


File: autoconf.info,  Node: Portable Shell,  Next: Testing Values and Files,  Prev: Run Time,  Up: Writing Tests

Portable Shell Programming
==========================

   When writing your own checks, there are some shell script programming
techniques you should avoid in order to make your code portable.  The
Bourne shell and upward-compatible shells like Bash and the Korn shell
have evolved over the years, but to prevent trouble, do not take
advantage of features that were added after UNIX version 7, circa 1977.
You should not use shell functions, aliases, negated character classes,
or other features that are not found in all Bourne-compatible shells;
restrict yourself to the lowest common denominator.  Even `unset' is
not supported by all shells!  Also, include a space after the
exclamation point in interpreter specifications, like this:
     #! /usr/bin/perl
   If you omit the space before the path, then 4.2BSD based systems
(such as Sequent DYNIX) will ignore the line, because they interpret
`#! /' as a 4-byte magic number.

   The set of external programs you should run in a `configure' script
is fairly small.  *Note Utilities in Makefiles: (standards)Utilities in
Makefiles, for the list.  This restriction allows users to start out
with a fairly small set of programs and build the rest, avoiding too
many interdependencies between packages.

   Some of these external utilities have a portable subset of features,
as well; for example, don't rely on `ln' having a `-f' option or `cat'
having any options.  `sed' scripts should not contain comments or use
branch labels longer than 8 characters.  Don't use `grep -s' to
suppress output, because `grep -s' on System V does not suppress
output, only error messages.  Instead, redirect the standard output and
standard error (in case the file doesn't exist) of `grep' to
`/dev/null'.  Check the exit status of `grep' to determine whether it
found a match.


File: autoconf.info,  Node: Testing Values and Files,  Next: Multiple Cases,  Prev: Portable Shell,  Up: Writing Tests

Testing Values and Files
========================

   `configure' scripts need to test properties of many files and
strings.  Here are some portability problems to watch out for when doing
those tests.

   The `test' program is the way to perform many file and string tests.
It is often invoked by the alternate name `[', but using that name in
Autoconf code is asking for trouble since it is an `m4' quote character.

   If you need to make multiple checks using `test', combine them with
the shell operators `&&' and `||' instead of using the `test' operators
`-a' and `-o'.  On System V, the precedence of `-a' and `-o' is wrong
relative to the unary operators; consequently, POSIX does not specify
them, so using them is nonportable.  If you combine `&&' and `||' in
the same statement, keep in mind that they have equal precedence.

   To enable `configure' scripts to support cross-compilation, they
shouldn't do anything that tests features of the host system instead of
the target system.  But occasionally you may find it necessary to check
whether some arbitrary file exists.  To do so, use `test -f' or `test
-r'.  Do not use `test -x', because 4.3BSD does not have it.

   Another nonportable shell programming construction is
     VAR=${VAR:-VALUE}

The intent is to set VAR to VALUE only if it is not already set, but if
VAR has any value, even the empty string, to leave it alone.  Old BSD
shells, including the Ultrix `sh', don't accept the colon, and complain
and die.  A portable equivalent is
     : ${VAR=VALUE}


File: autoconf.info,  Node: Multiple Cases,  Next: Language Choice,  Prev: Testing Values and Files,  Up: Writing Tests

Multiple Cases
==============

   Some operations are accomplished in several possible ways, depending
on the UNIX variant.  Checking for them essentially requires a "case
statement".  Autoconf does not directly provide one; however, it is
easy to simulate by using a shell variable to keep track of whether a
way to perform the operation has been found yet.

   Here is an example that uses the shell variable `fstype' to keep
track of whether the remaining cases need to be checked.

     AC_MSG_CHECKING(how to get filesystem type)
     fstype=no
     # The order of these tests is important.
     AC_TRY_CPP([#include <sys/statvfs.h>
     #include <sys/fstyp.h>], AC_DEFINE(FSTYPE_STATVFS) fstype=SVR4)
     if test $fstype = no; then
     AC_TRY_CPP([#include <sys/statfs.h>
     #include <sys/fstyp.h>], AC_DEFINE(FSTYPE_USG_STATFS) fstype=SVR3)
     fi
     if test $fstype = no; then
     AC_TRY_CPP([#include <sys/statfs.h>
     #include <sys/vmount.h>], AC_DEFINE(FSTYPE_AIX_STATFS) fstype=AIX)
     fi
     # (more cases omitted here)
     AC_MSG_RESULT($fstype)


File: autoconf.info,  Node: Language Choice,  Prev: Multiple Cases,  Up: Writing Tests

Language Choice
===============

   Packages that use both C and C++ need to test features of both
compilers.  Autoconf-generated `configure' scripts check for C features
by default.  The following macros determine which language's compiler
is used in tests that follow in `configure.in'.

 - Macro: AC_LANG_C
     Do compilation tests using `CC' and `CPP' and use extension `.c'
     for test programs.  Set the shell variable `cross_compiling' to
     the value computed by `AC_PROG_CC' if it has been run, empty
     otherwise.

 - Macro: AC_LANG_CPLUSPLUS
     Do compilation tests using `CXX' and `CXXCPP' and use extension
     `.C' for test programs.  Set the shell variable `cross_compiling'
     to the value computed by `AC_PROG_CXX' if it has been run, empty
     otherwise.

 - Macro: AC_LANG_FORTRAN77
     Do compilation tests using `F77' and use extension `.f' for test
     programs.  Set the shell variable `cross_compiling' to the value
     computed by `AC_PROG_F77' if it has been run, empty otherwise.

 - Macro: AC_LANG_SAVE
     Remember the current language (as set by `AC_LANG_C',
     `AC_LANG_CPLUSPLUS' or `AC_LANG_FORTRAN77') on a stack.  Does not
     change which language is current.  Use this macro and
     `AC_LANG_RESTORE' in macros that need to temporarily switch to a
     particular language.

 - Macro: AC_LANG_RESTORE
     Select the language that is saved on the top of the stack, as set
     by `AC_LANG_SAVE', and remove it from the stack.  This macro is
     equivalent to either `AC_LANG_C', `AC_LANG_CPLUSPLUS' or
     `AC_LANG_FORTRAN77', whichever had been run most recently when
     `AC_LANG_SAVE' was last called.

     Do not call this macro more times than `AC_LANG_SAVE'.

 - Macro: AC_REQUIRE_CPP
     Ensure that whichever preprocessor would currently be used for
     tests has been found.  Calls `AC_REQUIRE' (*note Prerequisite
     Macros::.) with an argument of either `AC_PROG_CPP' or
     `AC_PROG_CXXCPP', depending on which language is current.


File: autoconf.info,  Node: Results,  Next: Writing Macros,  Prev: Writing Tests,  Up: Top

Results of Tests
****************

   Once `configure' has determined whether a feature exists, what can
it do to record that information?  There are four sorts of things it can
do: define a C preprocessor symbol, set a variable in the output files,
save the result in a cache file for future `configure' runs, and print
a message letting the user know the result of the test.

* Menu:

* Defining Symbols::            Defining C preprocessor symbols.
* Setting Output Variables::    Replacing variables in output files.
* Caching Results::             Speeding up subsequent `configure' runs.
* Printing Messages::           Notifying users of progress or problems.


File: autoconf.info,  Node: Defining Symbols,  Next: Setting Output Variables,  Prev: Results,  Up: Results

Defining C Preprocessor Symbols
===============================

   A common action to take in response to a feature test is to define a
C preprocessor symbol indicating the results of the test.  That is done
by calling `AC_DEFINE' or `AC_DEFINE_UNQUOTED'.

   By default, `AC_OUTPUT' places the symbols defined by these macros
into the output variable `DEFS', which contains an option
`-DSYMBOL=VALUE' for each symbol defined.  Unlike in Autoconf version
1, there is no variable `DEFS' defined while `configure' is running.
To check whether Autoconf macros have already defined a certain C
preprocessor symbol, test the value of the appropriate cache variable,
as in this example:

     AC_CHECK_FUNC(vprintf, AC_DEFINE(HAVE_VPRINTF))
     if test "$ac_cv_func_vprintf" != yes; then
     AC_CHECK_FUNC(_doprnt, AC_DEFINE(HAVE_DOPRNT))
     fi

   If `AC_CONFIG_HEADER' has been called, then instead of creating
`DEFS', `AC_OUTPUT' creates a header file by substituting the correct
values into `#define' statements in a template file.  *Note
Configuration Headers::, for more information about this kind of output.

 - Macro: AC_DEFINE (VARIABLE [, VALUE [, DESCRIPTION]])
     Define C preprocessor variable VARIABLE.  If VALUE is given, set
     VARIABLE to that value (verbatim), otherwise set it to 1.  VALUE
     should not contain literal newlines, and if you are not using
     `AC_CONFIG_HEADER' it should not contain any `#' characters, as
     `make' tends to eat them.  To use a shell variable (which you need
     to do in order to define a value containing the `m4' quote
     characters `[' or `]'), use `AC_DEFINE_UNQUOTED' instead.
     DESCRIPTION is only useful if you are using `AC_CONFIG_HEADER'.
     In this case, DESCRIPTION is put into the generated `config.h.in'
     as the comment before the macro define; the macro need not be
     mentioned in `acconfig.h'.  The following example defines the C
     preprocessor variable `EQUATION' to be the string constant `"$a >
     $b"':

          AC_DEFINE(EQUATION, "$a > $b")

 - Macro: AC_DEFINE_UNQUOTED (VARIABLE [, VALUE [, DESCRIPTION]])
     Like `AC_DEFINE', but three shell expansions are
     performed--once--on VARIABLE and VALUE: variable expansion (`$'),
     command substitution (``'), and backslash escaping (`\').  Single
     and double quote characters in the value have no special meaning.
     Use this macro instead of `AC_DEFINE' when VARIABLE or VALUE is a
     shell variable.  Examples:

          AC_DEFINE_UNQUOTED(config_machfile, "${machfile}")
          AC_DEFINE_UNQUOTED(GETGROUPS_T, $ac_cv_type_getgroups)
          AC_DEFINE_UNQUOTED(${ac_tr_hdr})

   Due to the syntactical bizarreness of the Bourne shell, do not use
semicolons to separate `AC_DEFINE' or `AC_DEFINE_UNQUOTED' calls from
other macro calls or shell code; that can cause syntax errors in the
resulting `configure' script.  Use either spaces or newlines.  That is,
do this:

     AC_CHECK_HEADER(elf.h, AC_DEFINE(SVR4) LIBS="$LIBS -lelf")

or this:

     AC_CHECK_HEADER(elf.h,
       AC_DEFINE(SVR4)
       LIBS="$LIBS -lelf")

instead of this:

     AC_CHECK_HEADER(elf.h, AC_DEFINE(SVR4); LIBS="$LIBS -lelf")


File: autoconf.info,  Node: Setting Output Variables,  Next: Caching Results,  Prev: Defining Symbols,  Up: Results

Setting Output Variables
========================

   One way to record the results of tests is to set "output variables",
which are shell variables whose values are substituted into files that
`configure' outputs.  The two macros below create new output variables.
*Note Preset Output Variables::, for a list of output variables that
are always available.

 - Macro: AC_SUBST (VARIABLE)
     Create an output variable from a shell variable.  Make `AC_OUTPUT'
     substitute the variable VARIABLE into output files (typically one
     or more `Makefile's).  This means that `AC_OUTPUT' will replace
     instances of `@VARIABLE@' in input files with the value that the
     shell variable VARIABLE has when `AC_OUTPUT' is called.  The value
     of VARIABLE should not contain literal newlines.

 - Macro: AC_SUBST_FILE (VARIABLE)
     Another way to create an output variable from a shell variable.
     Make `AC_OUTPUT' insert (without substitutions) the contents of
     the file named by shell variable VARIABLE into output files.  This
     means that `AC_OUTPUT' will replace instances of `@VARIABLE@' in
     output files (such as `Makefile.in') with the contents of the file
     that the shell variable VARIABLE names when `AC_OUTPUT' is called.
     Set the variable to `/dev/null' for cases that do not have a file
     to insert.

     This macro is useful for inserting `Makefile' fragments containing
     special dependencies or other `make' directives for particular host
     or target types into `Makefile's.  For example, `configure.in'
     could contain:

          AC_SUBST_FILE(host_frag)dnl
          host_frag=$srcdir/conf/sun4.mh

     and then a `Makefile.in' could contain:

          @host_frag@


File: autoconf.info,  Node: Caching Results,  Next: Printing Messages,  Prev: Setting Output Variables,  Up: Results

Caching Results
===============

   To avoid checking for the same features repeatedly in various
`configure' scripts (or repeated runs of one script), `configure' saves
the results of many of its checks in a "cache file".  If, when a
`configure' script runs, it finds a cache file, it reads from it the
results from previous runs and avoids rerunning those checks.  As a
result, `configure' can run much faster than if it had to perform all
of the checks every time.

 - Macro: AC_CACHE_VAL (CACHE-ID, COMMANDS-TO-SET-IT)
     Ensure that the results of the check identified by CACHE-ID are
     available.  If the results of the check were in the cache file
     that was read, and `configure' was not given the `--quiet' or
     `--silent' option, print a message saying that the result was
     cached; otherwise, run the shell commands COMMANDS-TO-SET-IT.
     Those commands should have no side effects except for setting the
     variable CACHE-ID.  In particular, they should not call
     `AC_DEFINE'; the code that follows the call to `AC_CACHE_VAL'
     should do that, based on the cached value.  Also, they should not
     print any messages, for example with `AC_MSG_CHECKING'; do that
     before calling `AC_CACHE_VAL', so the messages are printed
     regardless of whether the results of the check are retrieved from
     the cache or determined by running the shell commands.  If the
     shell commands are run to determine the value, the value will be
     saved in the cache file just before `configure' creates its output
     files.  *Note Cache Variable Names::, for how to choose the name
     of the CACHE-ID variable.

 - Macro: AC_CACHE_CHECK (MESSAGE, CACHE-ID, COMMANDS)
     A wrapper for `AC_CACHE_VAL' that takes care of printing the
     messages.  This macro provides a convenient shorthand for the most
     common way to use these macros.  It calls `AC_MSG_CHECKING' for
     MESSAGE, then `AC_CACHE_VAL' with the CACHE-ID and COMMANDS
     arguments, and `AC_MSG_RESULT' with CACHE-ID.

 - Macro: AC_CACHE_LOAD
     Loads values from existing cache file, or creates a new cache file
     if a cache file is not found.  Called automatically from `AC_INIT'.

 - Macro: AC_CACHE_SAVE
     Flushes all cached values to the cache file.  Called automatically
     from `AC_OUTPUT', but it can be quite useful to call
     `AC_CACHE_SAVE' at key points in configure.in.  Doing so
     checkpoints the cache in case of an early configure script abort.

* Menu:

* Cache Variable Names::        Shell variables used in caches.
* Cache Files::                 Files `configure' uses for caching.


File: autoconf.info,  Node: Cache Variable Names,  Next: Cache Files,  Prev: Caching Results,  Up: Caching Results

Cache Variable Names
--------------------

   The names of cache variables should have the following format:

     PACKAGE-PREFIX_cv_VALUE-TYPE_SPECIFIC-VALUE[_ADDITIONAL-OPTIONS]

for example, `ac_cv_header_stat_broken' or
`ac_cv_prog_gcc_traditional'.  The parts of the variable name are:

PACKAGE-PREFIX
     An abbreviation for your package or organization; the same prefix
     you begin local Autoconf macros with, except lowercase by
     convention.  For cache values used by the distributed Autoconf
     macros, this value is `ac'.

`_cv_'
     Indicates that this shell variable is a cache value.

VALUE-TYPE
     A convention for classifying cache values, to produce a rational
     naming system.  The values used in Autoconf are listed in *Note
     Macro Names::.

SPECIFIC-VALUE
     Which member of the class of cache values this test applies to.
     For example, which function (`alloca'), program (`gcc'), or output
     variable (`INSTALL').

ADDITIONAL-OPTIONS
     Any particular behavior of the specific member that this test
     applies to.  For example, `broken' or `set'.  This part of the
     name may be omitted if it does not apply.

   The values assigned to cache variables may not contain newlines.
Usually, their values will be boolean (`yes' or `no') or the names of
files or functions; so this is not an important restriction.


File: autoconf.info,  Node: Cache Files,  Prev: Cache Variable Names,  Up: Caching Results

Cache Files
-----------

   A cache file is a shell script that caches the results of configure
tests run on one system so they can be shared between configure scripts
and configure runs.  It is not useful on other systems.  If its contents
are invalid for some reason, the user may delete or edit it.

   By default, configure uses `./config.cache' as the cache file,
creating it if it does not exist already.  `configure' accepts the
`--cache-file=FILE' option to use a different cache file; that is what
`configure' does when it calls `configure' scripts in subdirectories,
so they share the cache.  *Note Subdirectories::, for information on
configuring subdirectories with the `AC_CONFIG_SUBDIRS' macro.

   Giving `--cache-file=/dev/null' disables caching, for debugging
`configure'.  `config.status' only pays attention to the cache file if
it is given the `--recheck' option, which makes it rerun `configure'.
If you are anticipating a long debugging period, you can also disable
cache loading and saving for a `configure' script by redefining the
cache macros at the start of `configure.in':

     define([AC_CACHE_LOAD], )dnl
     define([AC_CACHE_SAVE], )dnl
     AC_INIT(whatever)
      ... rest of configure.in ...

   It is wrong to try to distribute cache files for particular system
types.  There is too much room for error in doing that, and too much
administrative overhead in maintaining them.  For any features that
can't be guessed automatically, use the standard method of the canonical
system type and linking files (*note Manual Configuration::.).

   The cache file on a particular system will gradually accumulate
whenever someone runs a `configure' script; it will be initially
nonexistent.  Running `configure' merges the new cache results with the
existing cache file.  The site initialization script can specify a
site-wide cache file to use instead of the default, to make it work
transparently, as long as the same C compiler is used every time (*note
Site Defaults::.).

   If your configure script, or a macro called from configure.in,
happens to abort the configure process, it may be useful to checkpoint
the cache a few times at key points.  Doing so will reduce the amount
of time it takes to re-run the configure script with (hopefully) the
error that caused the previous abort corrected.

      ... AC_INIT, etc. ...
     dnl checks for programs
     AC_PROG_CC
     AC_PROG_GCC_TRADITIONAL
      ... more program checks ...
     AC_CACHE_SAVE
     
     dnl checks for libraries
     AC_CHECK_LIB(nsl, gethostbyname)
     AC_CHECK_LIB(socket, connect)
      ... more lib checks ...
     AC_CACHE_SAVE
     
     dnl Might abort...
     AM_PATH_GTK(1.0.2, , exit 1)
     AM_PATH_GTKMM(0.9.5, , exit 1)


File: autoconf.info,  Node: Printing Messages,  Prev: Caching Results,  Up: Results

Printing Messages
=================

   `configure' scripts need to give users running them several kinds of
information.  The following macros print messages in ways appropriate
for each kind.  The arguments to all of them get enclosed in shell
double quotes, so the shell performs variable and backquote substitution
on them.  You can print a message containing a comma by quoting the
message with the `m4' quote characters:

     AC_MSG_RESULT([never mind, I found the BASIC compiler])

   These macros are all wrappers around the `echo' shell command.
`configure' scripts should rarely need to run `echo' directly to print
messages for the user.  Using these macros makes it easy to change how
and when each kind of message is printed; such changes need only be
made to the macro definitions, and all of the callers change
automatically.

 - Macro: AC_MSG_CHECKING (FEATURE-DESCRIPTION)
     Notify the user that `configure' is checking for a particular
     feature.  This macro prints a message that starts with `checking '
     and ends with `...' and no newline.  It must be followed by a call
     to `AC_MSG_RESULT' to print the result of the check and the
     newline.  The FEATURE-DESCRIPTION should be something like
     `whether the Fortran compiler accepts C++ comments' or `for c89'.

     This macro prints nothing if `configure' is run with the `--quiet'
     or `--silent' option.

 - Macro: AC_MSG_RESULT (RESULT-DESCRIPTION)
     Notify the user of the results of a check.  RESULT-DESCRIPTION is
     almost always the value of the cache variable for the check,
     typically `yes', `no', or a file name.  This macro should follow a
     call to `AC_MSG_CHECKING', and the RESULT-DESCRIPTION should be
     the completion of the message printed by the call to
     `AC_MSG_CHECKING'.

     This macro prints nothing if `configure' is run with the `--quiet'
     or `--silent' option.

 - Macro: AC_MSG_ERROR (ERROR-DESCRIPTION)
     Notify the user of an error that prevents `configure' from
     completing.  This macro prints an error message on the standard
     error output and exits `configure' with a nonzero status.
     ERROR-DESCRIPTION should be something like `invalid value $HOME
     for \$HOME'.

 - Macro: AC_MSG_WARN (PROBLEM-DESCRIPTION)
     Notify the `configure' user of a possible problem.  This macro
     prints the message on the standard error output; `configure'
     continues running afterward, so macros that call `AC_MSG_WARN'
     should provide a default (back-up) behavior for the situations
     they warn about.  PROBLEM-DESCRIPTION should be something like `ln
     -s seems to make hard links'.

   The following two macros are an obsolete alternative to
`AC_MSG_CHECKING' and `AC_MSG_RESULT'.

 - Macro: AC_CHECKING (FEATURE-DESCRIPTION)
     This macro is similar to `AC_MSG_CHECKING', except that it prints a
     newline after the FEATURE-DESCRIPTION.  It is useful mainly to
     print a general description of the overall purpose of a group of
     feature checks, e.g.,

          AC_CHECKING(if stack overflow is detectable)

 - Macro: AC_VERBOSE (RESULT-DESCRIPTION)
     This macro is similar to `AC_MSG_RESULT', except that it is meant
     to follow a call to `AC_CHECKING' instead of `AC_MSG_CHECKING'; it
     starts the message it prints with a tab.  It is considered
     obsolete.


File: autoconf.info,  Node: Writing Macros,  Next: Manual Configuration,  Prev: Results,  Up: Top

Writing Macros
**************

   When you write a feature test that could be applicable to more than
one software package, the best thing to do is encapsulate it in a new
macro.  Here are some instructions and guidelines for writing Autoconf
macros.

* Menu:

* Macro Definitions::           Basic format of an Autoconf macro.
* Macro Names::                 What to call your new macros.
* Quoting::                     Protecting macros from unwanted expansion.
* Dependencies Between Macros::  What to do when macros depend on other macros.


File: autoconf.info,  Node: Macro Definitions,  Next: Macro Names,  Prev: Writing Macros,  Up: Writing Macros

Macro Definitions
=================

   Autoconf macros are defined using the `AC_DEFUN' macro, which is
similar to the `m4' builtin `define' macro.  In addition to defining a
macro, `AC_DEFUN' adds to it some code which is used to constrain the
order in which macros are called (*note Prerequisite Macros::.).

   An Autoconf macro definition looks like this:

     AC_DEFUN(MACRO-NAME, [MACRO-BODY])

The square brackets here do not indicate optional text: they should
literally be present in the macro definition to avoid macro expansion
problems (*note Quoting::.).  You can refer to any arguments passed to
the macro as `$1', `$2', etc.

   To introduce comments in `m4', use the `m4' builtin `dnl'; it causes
`m4' to discard the text through the next newline.  It is not needed
between macro definitions in `acsite.m4' and `aclocal.m4', because all
output is discarded until `AC_INIT' is called.

   *Note How to define new macros: (m4.info)Definitions, for more
complete information on writing `m4' macros.


File: autoconf.info,  Node: Macro Names,  Next: Quoting,  Prev: Macro Definitions,  Up: Writing Macros

Macro Names
===========

   All of the Autoconf macros have all-uppercase names starting with
`AC_' to prevent them from accidentally conflicting with other text.
All shell variables that they use for internal purposes have
mostly-lowercase names starting with `ac_'.  To ensure that your macros
don't conflict with present or future Autoconf macros, you should
prefix your own macro names and any shell variables they use with some
other sequence.  Possibilities include your initials, or an abbreviation
for the name of your organization or software package.

   Most of the Autoconf macros' names follow a structured naming
convention that indicates the kind of feature check by the name.  The
macro names consist of several words, separated by underscores, going
from most general to most specific.   The names of their cache
variables use the same convention (*note Cache Variable Names::., for
more information on them).

   The first word of the name after `AC_' usually tells the category of
feature being tested.  Here are the categories used in Autoconf for
specific test macros, the kind of macro that you are more likely to
write.  They are also used for cache variables, in all-lowercase.  Use
them where applicable; where they're not, invent your own categories.

`C'
     C language builtin features.

`DECL'
     Declarations of C variables in header files.

`FUNC'
     Functions in libraries.

`GROUP'
     UNIX group owners of files.

`HEADER'
     Header files.

`LIB'
     C libraries.

`PATH'
     The full path names to files, including programs.

`PROG'
     The base names of programs.

`STRUCT'
     Definitions of C structures in header files.

`SYS'
     Operating system features.

`TYPE'
     C builtin or declared types.

`VAR'
     C variables in libraries.

   After the category comes the name of the particular feature being
tested.  Any further words in the macro name indicate particular aspects
of the feature.  For example, `AC_FUNC_UTIME_NULL' checks the behavior
of the `utime' function when called with a `NULL' pointer.

   A macro that is an internal subroutine of another macro should have a
name that starts with the name of that other macro, followed by one or
more words saying what the internal macro does.  For example,
`AC_PATH_X' has internal macros `AC_PATH_X_XMKMF' and
`AC_PATH_X_DIRECT'.


File: autoconf.info,  Node: Quoting,  Next: Dependencies Between Macros,  Prev: Macro Names,  Up: Writing Macros

Quoting
=======

   Macros that are called by other macros are evaluated by `m4' several
times; each evaluation might require another layer of quotes to prevent
unwanted expansions of macros or `m4' builtins, such as `define' and
`$1'.  Quotes are also required around macro arguments that contain
commas, since commas separate the arguments from each other.  It's a
good idea to quote any macro arguments that contain newlines or calls
to other macros, as well.

   Autoconf changes the `m4' quote characters from the default ``' and
`'' to `[' and `]', because many of the macros use ``' and `'',
mismatched.  However, in a few places the macros need to use brackets
(usually in C program text or regular expressions).  In those places,
they use the `m4' builtin command `changequote' to temporarily change
the quote characters to `<<' and `>>'.  (Sometimes, if they don't need
to quote anything, they disable quoting entirely instead by setting the
quote characters to empty strings.)  Here is an example:

     AC_TRY_LINK(
     changequote(<<, >>)dnl
     <<#include <time.h>
     #ifndef tzname /* For SGI.  */
     extern char *tzname[]; /* RS6000 and others reject char **tzname.  */
     #endif>>,
     changequote([, ])dnl
     [atoi(*tzname);], ac_cv_var_tzname=yes, ac_cv_var_tzname=no)

   When you create a `configure' script using newly written macros,
examine it carefully to check whether you need to add more quotes in
your macros.  If one or more words have disappeared in the `m4' output,
you need more quotes.  When in doubt, quote.

   However, it's also possible to put on too many layers of quotes.  If
this happens, the resulting `configure' script will contain unexpanded
macros.  The `autoconf' program checks for this problem by doing `grep
AC_ configure'.


File: autoconf.info,  Node: Dependencies Between Macros,  Prev: Quoting,  Up: Writing Macros

Dependencies Between Macros
===========================

   Some Autoconf macros depend on other macros having been called first
in order to work correctly.  Autoconf provides a way to ensure that
certain macros are called if needed and a way to warn the user if
macros are called in an order that might cause incorrect operation.

* Menu:

* Prerequisite Macros::         Ensuring required information.
* Suggested Ordering::          Warning about possible ordering problems.
* Obsolete Macros::             Warning about old ways of doing things.


File: autoconf.info,  Node: Prerequisite Macros,  Next: Suggested Ordering,  Prev: Dependencies Between Macros,  Up: Dependencies Between Macros

Prerequisite Macros
-------------------

   A macro that you write might need to use values that have previously
been computed by other macros.  For example, `AC_DECL_YYTEXT' examines
the output of `flex' or `lex', so it depends on `AC_PROG_LEX' having
been called first to set the shell variable `LEX'.

   Rather than forcing the user of the macros to keep track of the
dependencies between them, you can use the `AC_REQUIRE' macro to do it
automatically.  `AC_REQUIRE' can ensure that a macro is only called if
it is needed, and only called once.

 - Macro: AC_REQUIRE (MACRO-NAME)
     If the `m4' macro MACRO-NAME has not already been called, call it
     (without any arguments).  Make sure to quote MACRO-NAME with
     square brackets.  MACRO-NAME must have been defined using
     `AC_DEFUN' or else contain a call to `AC_PROVIDE' to indicate that
     it has been called.

   An alternative to using `AC_DEFUN' is to use `define' and call
`AC_PROVIDE'.  Because this technique does not prevent nested messages,
it is considered obsolete.

 - Macro: AC_PROVIDE (THIS-MACRO-NAME)
     Record the fact that THIS-MACRO-NAME has been called.
     THIS-MACRO-NAME should be the name of the macro that is calling
     `AC_PROVIDE'.  An easy way to get it is from the `m4' builtin
     variable `$0', like this:

          AC_PROVIDE([$0])


File: autoconf.info,  Node: Suggested Ordering,  Next: Obsolete Macros,  Prev: Prerequisite Macros,  Up: Dependencies Between Macros

Suggested Ordering
------------------

   Some macros should be run before another macro if both are called,
but neither *requires* that the other be called.  For example, a macro
that changes the behavior of the C compiler should be called before any
macros that run the C compiler.  Many of these dependencies are noted in
the documentation.

   Autoconf provides the `AC_BEFORE' macro to warn users when macros
with this kind of dependency appear out of order in a `configure.in'
file.  The warning occurs when creating `configure' from
`configure.in', not when running `configure'.  For example,
`AC_PROG_CPP' checks whether the C compiler can run the C preprocessor
when given the `-E' option.  It should therefore be called after any
macros that change which C compiler is being used, such as
`AC_PROG_CC'.  So `AC_PROG_CC' contains:

     AC_BEFORE([$0], [AC_PROG_CPP])dnl

This warns the user if a call to `AC_PROG_CPP' has already occurred
when `AC_PROG_CC' is called.

 - Macro: AC_BEFORE (THIS-MACRO-NAME, CALLED-MACRO-NAME)
     Make `m4' print a warning message on the standard error output if
     CALLED-MACRO-NAME has already been called.  THIS-MACRO-NAME should
     be the name of the macro that is calling `AC_BEFORE'.  The macro
     CALLED-MACRO-NAME must have been defined using `AC_DEFUN' or else
     contain a call to `AC_PROVIDE' to indicate that it has been called.


File: autoconf.info,  Node: Obsolete Macros,  Prev: Suggested Ordering,  Up: Dependencies Between Macros

Obsolete Macros
---------------

   Configuration and portability technology has evolved over the years.
Often better ways of solving a particular problem are developed, or
ad-hoc approaches are systematized.  This process has occurred in many
parts of Autoconf.  One result is that some of the macros are now
considered "obsolete"; they still work, but are no longer considered
the best thing to do.  Autoconf provides the `AC_OBSOLETE' macro to
warn users producing `configure' scripts when they use obsolete macros,
to encourage them to modernize.  A sample call is:

     AC_OBSOLETE([$0], [; use AC_CHECK_HEADERS(unistd.h) instead])dnl

 - Macro: AC_OBSOLETE (THIS-MACRO-NAME [, SUGGESTION])
     Make `m4' print a message on the standard error output warning that
     THIS-MACRO-NAME is obsolete, and giving the file and line number
     where it was called.  THIS-MACRO-NAME should be the name of the
     macro that is calling `AC_OBSOLETE'.  If SUGGESTION is given, it
     is printed at the end of the warning message; for example, it can
     be a suggestion for what to use instead of THIS-MACRO-NAME.


File: autoconf.info,  Node: Manual Configuration,  Next: Site Configuration,  Prev: Writing Macros,  Up: Top

Manual Configuration
********************

   A few kinds of features can't be guessed automatically by running
test programs.  For example, the details of the object file format, or
special options that need to be passed to the compiler or linker.  You
can check for such features using ad-hoc means, such as having
`configure' check the output of the `uname' program, or looking for
libraries that are unique to particular systems.  However, Autoconf
provides a uniform method for handling unguessable features.

* Menu:

* Specifying Names::            Specifying the system type.
* Canonicalizing::              Getting the canonical system type.
* System Type Variables::       Variables containing the system type.
* Using System Type::           What to do with the system type.


File: autoconf.info,  Node: Specifying Names,  Next: Canonicalizing,  Prev: Manual Configuration,  Up: Manual Configuration

Specifying the System Type
==========================

   Like other GNU `configure' scripts, Autoconf-generated `configure'
scripts can make decisions based on a canonical name for the system
type, which has the form:

     CPU-COMPANY-SYSTEM

   `configure' can usually guess the canonical name for the type of
system it's running on.  To do so it runs a script called
`config.guess', which derives the name using the `uname' command or
symbols predefined by the C preprocessor.

   Alternately, the user can specify the system type with command line
arguments to `configure'.  Doing so is necessary when cross-compiling.
In the most complex case of cross-compiling, three system types are
involved.  The options to specify them are:

`--build=BUILD-TYPE'
     the type of system on which the package is being configured and
     compiled (rarely needed);

`--host=HOST-TYPE'
     the type of system on which the package will run;

`--target=TARGET-TYPE'
     the type of system for which any compiler tools in the package will
     produce code.

If the user gives `configure' a non-option argument, it is used as the
default for the host, target, and build system types if the user does
not specify them explicitly with options.  The target and build types
default to the host type if it is given and they are not.  If you are
cross-compiling, you still have to specify the names of the cross-tools
you use, in particular the C compiler, on the `configure' command line,
e.g.,

     CC=m68k-coff-gcc configure --target=m68k-coff

   `configure' recognizes short aliases for many system types; for
example, `decstation' can be given on the command line instead of
`mips-dec-ultrix4.2'.  `configure' runs a script called `config.sub' to
canonicalize system type aliases.


File: autoconf.info,  Node: Canonicalizing,  Next: System Type Variables,  Prev: Specifying Names,  Up: Manual Configuration

Getting the Canonical System Type
=================================

   The following macros make the system type available to `configure'
scripts.  They run the shell script `config.guess' to determine any
values for the host, target, and build types that they need and the user
did not specify on the command line.  They run `config.sub' to
canonicalize any aliases the user gave.  If you use these macros, you
must distribute those two shell scripts along with your source code.
*Note Output::, for information about the `AC_CONFIG_AUX_DIR' macro
which you can use to control which directory `configure' looks for
those scripts in.  If you do not use either of these macros,
`configure' ignores any `--host', `--target', and `--build' options
given to it.

 - Macro: AC_CANONICAL_SYSTEM
     Determine the system type and set output variables to the names of
     the canonical system types.  *Note System Type Variables::, for
     details about the variables this macro sets.

 - Macro: AC_CANONICAL_HOST
     Perform only the subset of `AC_CANONICAL_SYSTEM' relevant to the
     host type.  This is all that is needed for programs that are not
     part of a compiler toolchain.

 - Macro: AC_VALIDATE_CACHED_SYSTEM_TUPLE (CMD)
     If the cache file is inconsistent with the current host, target
     and build system types, execute CMD or print a default error
     message.


File: autoconf.info,  Node: System Type Variables,  Next: Using System Type,  Prev: Canonicalizing,  Up: Manual Configuration

System Type Variables
=====================

   After calling `AC_CANONICAL_SYSTEM', the following output variables
contain the system type information.  After `AC_CANONICAL_HOST', only
the `host' variables below are set.

``build', `host', `target''
     the canonical system names;

``build_alias', `host_alias', `target_alias''
     the names the user specified, or the canonical names if
     `config.guess' was used;

``build_cpu', `build_vendor', `build_os''
``host_cpu', `host_vendor', `host_os''
``target_cpu', `target_vendor', `target_os''
     the individual parts of the canonical names (for convenience).


File: autoconf.info,  Node: Using System Type,  Prev: System Type Variables,  Up: Manual Configuration

Using the System Type
=====================

   How do you use a canonical system type?  Usually, you use it in one
or more `case' statements in `configure.in' to select system-specific C
files.  Then link those files, which have names based on the system
name, to generic names, such as `host.h' or `target.c'.  The `case'
statement patterns can use shell wildcards to group several cases
together, like in this fragment:

     case "$target" in
     i386-*-mach* | i386-*-gnu*) obj_format=aout emulation=mach bfd_gas=yes ;;
     i960-*-bout) obj_format=bout ;;
     esac

 - Macro: AC_LINK_FILES (SOURCE..., DEST...)
     Make `AC_OUTPUT' link each of the existing files SOURCE to the
     corresponding link name DEST.  Makes a symbolic link if possible,
     otherwise a hard link.  The DEST and SOURCE names should be
     relative to the top level source or build directory.  This macro
     may be called multiple times.

     For example, this call:

          AC_LINK_FILES(config/${machine}.h config/${obj_format}.h, host.h object.h)

     creates in the current directory `host.h', which is a link to
     `SRCDIR/config/${machine}.h', and `object.h', which is a link to
     `SRCDIR/config/${obj_format}.h'.

   You can also use the host system type to find cross-compilation
tools.  *Note Generic Programs::, for information about the
`AC_CHECK_TOOL' macro which does that.


File: autoconf.info,  Node: Site Configuration,  Next: Invoking configure,  Prev: Manual Configuration,  Up: Top

Site Configuration
******************

   `configure' scripts support several kinds of local configuration
decisions.  There are ways for users to specify where external software
packages are, include or exclude optional features, install programs
under modified names, and set default values for `configure' options.

* Menu:

* External Software::           Working with other optional software.
* Package Options::             Selecting optional features.
* Site Details::                Configuring site details.
* Transforming Names::          Changing program names when installing.
* Site Defaults::               Giving `configure' local defaults.


File: autoconf.info,  Node: External Software,  Next: Package Options,  Prev: Site Configuration,  Up: Site Configuration

Working With External Software
==============================

   Some packages require, or can optionally use, other software packages
which are already installed.  The user can give `configure' command
line options to specify which such external software to use.  The
options have one of these forms:

     --with-PACKAGE[=ARG]
     --without-PACKAGE

   For example, `--with-gnu-ld' means work with the GNU linker instead
of some other linker.  `--with-x' means work with The X Window System.

   The user can give an argument by following the package name with `='
and the argument.  Giving an argument of `no' is for packages that are
used by default; it says to *not* use the package.  An argument that is
neither `yes' nor `no' could include a name or number of a version of
the other package, to specify more precisely which other package this
program is supposed to work with.  If no argument is given, it defaults
to `yes'.  `--without-PACKAGE' is equivalent to `--with-PACKAGE=no'.

   `configure' scripts do not complain about `--with-PACKAGE' options
that they do not support.  This behavior permits configuring a source
tree containing multiple packages with a top-level `configure' script
when the packages support different options, without spurious error
messages about options that some of the packages support.  An
unfortunate side effect is that option spelling errors are not
diagnosed.  No better approach to this problem has been suggested so
far.

   For each external software package that may be used, `configure.in'
should call `AC_ARG_WITH' to detect whether the `configure' user asked
to use it.  Whether each package is used or not by default, and which
arguments are valid, is up to you.

 - Macro: AC_ARG_WITH (PACKAGE, HELP-STRING [, ACTION-IF-GIVEN [,
          ACTION-IF-NOT-GIVEN]])
     If the user gave `configure' the option `--with-PACKAGE' or
     `--without-PACKAGE', run shell commands ACTION-IF-GIVEN.  If
     neither option was given, run shell commands ACTION-IF-NOT-GIVEN.
     The name PACKAGE indicates another software package that this
     program should work with.  It should consist only of alphanumeric
     characters and dashes.

     The option's argument is available to the shell commands
     ACTION-IF-GIVEN in the shell variable `withval', which is actually
     just the value of the shell variable `with_PACKAGE', with any `-'
     characters changed into `_'.  You may use that variable instead,
     if you wish.

     The argument HELP-STRING is a description of the option which
     looks like this:
            --with-readline         support fancy command line editing

     HELP-STRING may be more than one line long, if more detail is
     needed.  Just make sure the columns line up in `configure --help'.
     Avoid tabs in the help string.  You'll need to enclose it in `['
     and `]' in order to produce the leading spaces.

 - Macro: AC_WITH (PACKAGE, ACTION-IF-GIVEN [, ACTION-IF-NOT-GIVEN])
     This is an obsolete version of `AC_ARG_WITH' that does not support
     providing a help string.


File: autoconf.info,  Node: Package Options,  Next: Site Details,  Prev: External Software,  Up: Site Configuration

Choosing Package Options
========================

   If a software package has optional compile-time features, the user
can give `configure' command line options to specify whether to compile
them.  The options have one of these forms:

     --enable-FEATURE[=ARG]
     --disable-FEATURE

   These options allow users to choose which optional features to build
and install.  `--enable-FEATURE' options should never make a feature
behave differently or cause one feature to replace another.  They
should only cause parts of the program to be built rather than left out.

   The user can give an argument by following the feature name with `='
and the argument.  Giving an argument of `no' requests that the feature
*not* be made available.  A feature with an argument looks like
`--enable-debug=stabs'.  If no argument is given, it defaults to `yes'.
`--disable-FEATURE' is equivalent to `--enable-FEATURE=no'.

   `configure' scripts do not complain about `--enable-FEATURE' options
that they do not support.  This behavior permits configuring a source
tree containing multiple packages with a top-level `configure' script
when the packages support different options, without spurious error
messages about options that some of the packages support.  An
unfortunate side effect is that option spelling errors are not
diagnosed.  No better approach to this problem has been suggested so
far.

   For each optional feature, `configure.in' should call
`AC_ARG_ENABLE' to detect whether the `configure' user asked to include
it.  Whether each feature is included or not by default, and which
arguments are valid, is up to you.

 - Macro: AC_ARG_ENABLE (FEATURE, HELP-STRING [, ACTION-IF-GIVEN [,
          ACTION-IF-NOT-GIVEN]])
     If the user gave `configure' the option `--enable-FEATURE' or
     `--disable-FEATURE', run shell commands ACTION-IF-GIVEN.  If
     neither option was given, run shell commands ACTION-IF-NOT-GIVEN.
     The name FEATURE indicates an optional user-level facility.  It
     should consist only of alphanumeric characters and dashes.

     The option's argument is available to the shell commands
     ACTION-IF-GIVEN in the shell variable `enableval', which is
     actually just the value of the shell variable `enable_FEATURE',
     with any `-' characters changed into `_'.  You may use that
     variable instead, if you wish.  The HELP-STRING argument is like
     that of `AC_ARG_WITH' (*note External Software::.).

 - Macro: AC_ENABLE (FEATURE, ACTION-IF-GIVEN [, ACTION-IF-NOT-GIVEN])
     This is an obsolete version of `AC_ARG_ENABLE' that does not
     support providing a help string.


File: autoconf.info,  Node: Site Details,  Next: Transforming Names,  Prev: Package Options,  Up: Site Configuration

Configuring Site Details
========================

   Some software packages require complex site-specific information.
Some examples are host names to use for certain services, company
names, and email addresses to contact.  Since some configuration
scripts generated by Metaconfig ask for such information interactively,
people sometimes wonder how to get that information in
Autoconf-generated configuration scripts, which aren't interactive.

   Such site configuration information should be put in a file that is
edited *only by users*, not by programs.  The location of the file can
either be based on the `prefix' variable, or be a standard location
such as the user's home directory.  It could even be specified by an
environment variable.  The programs should examine that file at run
time, rather than at compile time.  Run time configuration is more
convenient for users and makes the configuration process simpler than
getting the information while configuring.  *Note Variables for
Installation Directories: (standards)Directory Variables, for more
information on where to put data files.


File: autoconf.info,  Node: Transforming Names,  Next: Site Defaults,  Prev: Site Details,  Up: Site Configuration

Transforming Program Names When Installing
==========================================

   Autoconf supports changing the names of programs when installing
them.  In order to use these transformations, `configure.in' must call
the macro `AC_ARG_PROGRAM'.

 - Macro: AC_ARG_PROGRAM
     Place in output variable `program_transform_name' a sequence of
     `sed' commands for changing the names of installed programs.

     If any of the options described below are given to `configure',
     program names are transformed accordingly.  Otherwise, if
     `AC_CANONICAL_SYSTEM' has been called and a `--target' value is
     given that differs from the host type (specified with `--host' or
     defaulted by `config.sub'), the target type followed by a dash is
     used as a prefix.  Otherwise, no program name transformation is
     done.

* Menu:

* Transformation Options::      `configure' options to transform names.
* Transformation Examples::     Sample uses of transforming names.
* Transformation Rules::        `Makefile' uses of transforming names.


File: autoconf.info,  Node: Transformation Options,  Next: Transformation Examples,  Prev: Transforming Names,  Up: Transforming Names

Transformation Options
----------------------

   You can specify name transformations by giving `configure' these
command line options:

`--program-prefix=PREFIX'
     prepend PREFIX to the names;

`--program-suffix=SUFFIX'
     append SUFFIX to the names;

`--program-transform-name=EXPRESSION'
     perform `sed' substitution EXPRESSION on the names.


File: autoconf.info,  Node: Transformation Examples,  Next: Transformation Rules,  Prev: Transformation Options,  Up: Transforming Names

Transformation Examples
-----------------------

   These transformations are useful with programs that can be part of a
cross-compilation development environment.  For example, a
cross-assembler running on a Sun 4 configured with
`--target=i960-vxworks' is normally installed as `i960-vxworks-as',
rather than `as', which could be confused with a native Sun 4 assembler.

   You can force a program name to begin with `g', if you don't want
GNU programs installed on your system to shadow other programs with the
same name.  For example, if you configure GNU `diff' with
`--program-prefix=g', then when you run `make install' it is installed
as `/usr/local/bin/gdiff'.

   As a more sophisticated example, you could use
     --program-transform-name='s/^/g/; s/^gg/g/; s/^gless/less/'

to prepend `g' to most of the program names in a source tree, excepting
those like `gdb' that already have one and those like `less' and
`lesskey' that aren't GNU programs.  (That is assuming that you have a
source tree containing those programs that is set up to use this
feature.)

   One way to install multiple versions of some programs simultaneously
is to append a version number to the name of one or both.  For example,
if you want to keep Autoconf version 1 around for awhile, you can
configure Autoconf version 2 using `--program-suffix=2' to install the
programs as `/usr/local/bin/autoconf2', `/usr/local/bin/autoheader2',
etc.


File: autoconf.info,  Node: Transformation Rules,  Prev: Transformation Examples,  Up: Transforming Names

Transformation Rules
--------------------

   Here is how to use the variable `program_transform_name' in a
`Makefile.in':

     transform=@program_transform_name@
     install: all
             $(INSTALL_PROGRAM) myprog $(bindir)/`echo myprog|sed '$(transform)'`
     
     uninstall:
             rm -f $(bindir)/`echo myprog|sed '$(transform)'`

If you have more than one program to install, you can do it in a loop:

     PROGRAMS=cp ls rm
     install:
             for p in $(PROGRAMS); do \
               $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`; \
             done
     
     uninstall:
             for p in $(PROGRAMS); do \
               rm -f $(bindir)/`echo $$p|sed '$(transform)'`; \
             done

   Whether to do the transformations on documentation files (Texinfo or
`man') is a tricky question; there seems to be no perfect answer, due
to the several reasons for name transforming.  Documentation is not
usually particular to a specific architecture, and Texinfo files do not
conflict with system documentation.  But they might conflict with
earlier versions of the same files, and `man' pages sometimes do
conflict with system documentation.  As a compromise, it is probably
best to do name transformations on `man' pages but not on Texinfo
manuals.


File: autoconf.info,  Node: Site Defaults,  Prev: Transforming Names,  Up: Site Configuration

Setting Site Defaults
=====================

   Autoconf-generated `configure' scripts allow your site to provide
default values for some configuration values.  You do this by creating
site- and system-wide initialization files.

   If the environment variable `CONFIG_SITE' is set, `configure' uses
its value as the name of a shell script to read.  Otherwise, it reads
the shell script `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Thus, settings in
machine-specific files override those in machine-independent ones in
case of conflict.

   Site files can be arbitrary shell scripts, but only certain kinds of
code are really appropriate to be in them.  Because `configure' reads
any cache file after it has read any site files, a site file can define
a default cache file to be shared between all Autoconf-generated
`configure' scripts run on that system.  If you set a default cache
file in a site file, it is a good idea to also set the output variable
`CC' in that site file, because the cache file is only valid for a
particular compiler, but many systems have several available.

   You can examine or override the value set by a command line option to
`configure' in a site file; options set shell variables that have the
same names as the options, with any dashes turned into underscores.
The exceptions are that `--without-' and `--disable-' options are like
giving the corresponding `--with-' or `--enable-' option and the value
`no'.  Thus, `--cache-file=localcache' sets the variable `cache_file'
to the value `localcache'; `--enable-warnings=no' or
`--disable-warnings' sets the variable `enable_warnings' to the value
`no'; `--prefix=/usr' sets the variable `prefix' to the value `/usr';
etc.

   Site files are also good places to set default values for other
output variables, such as `CFLAGS', if you need to give them non-default
values: anything you would normally do, repetitively, on the command
line.  If you use non-default values for PREFIX or EXEC_PREFIX
(wherever you locate the site file), you can set them in the site file
if you specify it with the `CONFIG_SITE' environment variable.

   You can set some cache values in the site file itself.  Doing this is
useful if you are cross-compiling, so it is impossible to check features
that require running a test program.  You could "prime the cache" by
setting those values correctly for that system in
`PREFIX/etc/config.site'.  To find out the names of the cache variables
you need to set, look for shell variables with `_cv_' in their names in
the affected `configure' scripts, or in the Autoconf `m4' source code
for those macros.

   The cache file is careful to not override any variables set in the
site files.  Similarly, you should not override command-line options in
the site files.  Your code should check that variables such as `prefix'
and `cache_file' have their default values (as set near the top of
`configure') before changing them.

   Here is a sample file `/usr/share/local/gnu/share/config.site'.  The
command `configure --prefix=/usr/share/local/gnu' would read this file
(if `CONFIG_SITE' is not set to a different file).

     # config.site for configure
     #
     # Change some defaults.
     test "$prefix" = NONE && prefix=/usr/share/local/gnu
     test "$exec_prefix" = NONE && exec_prefix=/usr/local/gnu
     test "$sharedstatedir" = '${prefix}/com' && sharedstatedir=/var
     test "$localstatedir" = '${prefix}/var' && localstatedir=/var
     #
     # Give Autoconf 2.x generated configure scripts a shared default
     # cache file for feature test results, architecture-specific.
     if test "$cache_file" = ./config.cache; then
       cache_file="$prefix/var/config.cache"
       # A cache file is only valid for one C compiler.
       CC=gcc
     fi


File: autoconf.info,  Node: Invoking configure,  Next: Invoking config.status,  Prev: Site Configuration,  Up: Top

Running `configure' Scripts
***************************

   Below are instructions on how to configure a package that uses a
`configure' script, suitable for inclusion as an `INSTALL' file in the
package.  A plain-text version of `INSTALL' which you may use comes
with Autoconf.

* Menu:

* Basic Installation::          Instructions for typical cases.
* Compilers and Options::       Selecting compilers and optimization.
* Multiple Architectures::      Compiling for multiple architectures at once.
* Installation Names::          Installing in different directories.
* Optional Features::           Selecting optional features.
* System Type::                 Specifying the system type.
* Sharing Defaults::            Setting site-wide defaults for `configure'.
* Operation Controls::          Changing how `configure' runs.


File: autoconf.info,  Node: Basic Installation,  Next: Compilers and Options,  Up: Invoking configure

Basic Installation
==================

   These are generic installation instructions.

   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions.  Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').

   If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release.  If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.

   The file `configure.in' is used to create `configure' by a program
called `autoconf'.  You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.

The simplest way to compile this package is:

  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.  If you're
     using `csh' on an old version of System V, you might need to type
     `sh ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.

     Running `configure' takes awhile.  While running, it prints some
     messages telling which features it is checking for.

  2. Type `make' to compile the package.

  3. Optionally, type `make check' to run any self-tests that come with
     the package.

  4. Type `make install' to install the programs and any data files and
     documentation.

  5. You can remove the program binaries and object files from the
     source code directory by typing `make clean'.  To also remove the
     files that `configure' created (so you can compile the package for
     a different kind of computer), type `make distclean'.  There is
     also a `make maintainer-clean' target, but that is intended mainly
     for the package's developers.  If you use it, you may have to get
     all sorts of other programs in order to regenerate files that came
     with the distribution.


File: autoconf.info,  Node: Compilers and Options,  Next: Multiple Architectures,  Prev: Basic Installation,  Up: Invoking configure

Compilers and Options
=====================

   Some systems require unusual options for compilation or linking that
the `configure' script does not know about.  You can give `configure'
initial values for variables by setting them in the environment.  Using
a Bourne-compatible shell, you can do that on the command line like
this:
     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

Or on systems that have the `env' program, you can do it like this:
     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure


File: autoconf.info,  Node: Multiple Architectures,  Next: Installation Names,  Prev: Compilers and Options,  Up: Invoking configure

Compiling For Multiple Architectures
====================================

   You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory.  To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'.  `cd' to the
directory where you want the object files and executables to go and run
the `configure' script.  `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

   If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory.  After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.


File: autoconf.info,  Node: Installation Names,  Next: Optional Features,  Prev: Multiple Architectures,  Up: Invoking configure

Installation Names
==================

   By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc.  You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.

   In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files.  Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.

   If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.


File: autoconf.info,  Node: Optional Features,  Next: System Type,  Prev: Installation Names,  Up: Invoking configure

Optional Features
=================

   Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System).  The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

   For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.


File: autoconf.info,  Node: System Type,  Next: Sharing Defaults,  Prev: Optional Features,  Up: Invoking configure

Specifying the System Type
==========================

   There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on.  Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option.  TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
     CPU-COMPANY-SYSTEM

See the file `config.sub' for the possible values of each field.  If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.

   If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.


File: autoconf.info,  Node: Sharing Defaults,  Next: Operation Controls,  Prev: System Type,  Up: Invoking configure

Sharing Defaults
================

   If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.


File: autoconf.info,  Node: Operation Controls,  Prev: Sharing Defaults,  Up: Invoking configure

Operation Controls
==================

   `configure' recognizes the following options to control how it
operates.

`--cache-file=FILE'
     Use and save the results of the tests in FILE instead of
     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
     debugging `configure'.

`--help'
     Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.  To
     suppress all normal output, redirect it to `/dev/null' (any error
     messages will still be shown).

`--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`--version'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

`configure' also accepts some other, not widely useful, options.


File: autoconf.info,  Node: Invoking config.status,  Next: Questions,  Prev: Invoking configure,  Up: Top

Recreating a Configuration
**************************

   The `configure' script creates a file named `config.status' which
describes which configuration options were specified when the package
was last configured.  This file is a shell script which, if run, will
recreate the same configuration.

   You can give `config.status' the `--recheck' option to update
itself.  This option is useful if you change `configure', so that the
results of some tests might be different from the previous run.  The
`--recheck' option re-runs `configure' with the same arguments you used
before, plus the `--no-create' option, which prevent `configure' from
running `config.status' and creating `Makefile' and other files, and
the `--no-recursion' option, which prevents `configure' from running
other `configure' scripts in subdirectories.  (This is so other
`Makefile' rules can run `config.status' when it changes; *note
Automatic Remaking::., for an example).

   `config.status' also accepts the options `--help', which prints a
summary of the options to `config.status', and `--version', which
prints the version of Autoconf used to create the `configure' script
that generated `config.status'.

   `config.status' checks several optional environment variables that
can alter its behavior:

 - Variable: CONFIG_SHELL
     The shell with which to run `configure' for the `--recheck'
     option.  It must be Bourne-compatible.  The default is `/bin/sh'.

 - Variable: CONFIG_STATUS
     The file name to use for the shell script that records the
     configuration.  The default is `./config.status'.  This variable is
     useful when one package uses parts of another and the `configure'
     scripts shouldn't be merged because they are maintained separately.

   The following variables provide one way for separately distributed
packages to share the values computed by `configure'.  Doing so can be
useful if some of the packages need a superset of the features that one
of them, perhaps a common library, does.  These variables allow a
`config.status' file to create files other than the ones that its
`configure.in' specifies, so it can be used for a different package.

 - Variable: CONFIG_FILES
     The files in which to perform `@VARIABLE@' substitutions.  The
     default is the arguments given to `AC_OUTPUT' in `configure.in'.

 - Variable: CONFIG_HEADERS
     The files in which to substitute C `#define' statements.  The
     default is the arguments given to `AC_CONFIG_HEADER'; if that
     macro was not called, `config.status' ignores this variable.

   These variables also allow you to write `Makefile' rules that
regenerate only some of the files.  For example, in the dependencies
given above (*note Automatic Remaking::.), `config.status' is run twice
when `configure.in' has changed.  If that bothers you, you can make
each run only regenerate the files for that rule:

     config.h: stamp-h
     stamp-h: config.h.in config.status
             CONFIG_FILES= CONFIG_HEADERS=config.h ./config.status
             echo > stamp-h
     
     Makefile: Makefile.in config.status
             CONFIG_FILES=Makefile CONFIG_HEADERS= ./config.status

(If `configure.in' does not call `AC_CONFIG_HEADER', there is no need
to set `CONFIG_HEADERS' in the `make' rules.)


File: autoconf.info,  Node: Questions,  Next: Upgrading,  Prev: Invoking config.status,  Up: Top

Questions About Autoconf
************************

   Several questions about Autoconf come up occasionally.  Here some of
them are addressed.

* Menu:

* Distributing::                Distributing `configure' scripts.
* Why GNU m4::                  Why not use the standard `m4'?
* Bootstrapping::               Autoconf and GNU `m4' require each other?
* Why Not Imake::               Why GNU uses `configure' instead of Imake.


File: autoconf.info,  Node: Distributing,  Next: Why GNU m4,  Prev: Questions,  Up: Questions

Distributing `configure' Scripts
================================

     What are the restrictions on distributing `configure'
     scripts that Autoconf generates?  How does that affect my
     programs that use them?

   There are no restrictions on how the configuration scripts that
Autoconf produces may be distributed or used.  In Autoconf version 1,
they were covered by the GNU General Public License.  We still
encourage software authors to distribute their work under terms like
those of the GPL, but doing so is not required to use Autoconf.

   Of the other files that might be used with `configure',
`config.h.in' is under whatever copyright you use for your
`configure.in', since it is derived from that file and from the public
domain file `acconfig.h'.  `config.sub' and `config.guess' have an
exception to the GPL when they are used with an Autoconf-generated
`configure' script, which permits you to distribute them under the same
terms as the rest of your package.  `install-sh' is from the X
Consortium and is not copyrighted.


File: autoconf.info,  Node: Why GNU m4,  Next: Bootstrapping,  Prev: Distributing,  Up: Questions

Why Require GNU `m4'?
=====================

     Why does Autoconf require GNU `m4'?

   Many `m4' implementations have hard-coded limitations on the size
and number of macros, which Autoconf exceeds.  They also lack several
builtin macros that it would be difficult to get along without in a
sophisticated application like Autoconf, including:

     builtin
     indir
     patsubst
     __file__
     __line__

   Since only software maintainers need to use Autoconf, and since GNU
`m4' is simple to configure and install, it seems reasonable to require
GNU `m4' to be installed also.  Many maintainers of GNU and other free
software already have most of the GNU utilities installed, since they
prefer them.


File: autoconf.info,  Node: Bootstrapping,  Next: Why Not Imake,  Prev: Why GNU m4,  Up: Questions

How Can I Bootstrap?
====================

     If Autoconf requires GNU `m4' and GNU `m4' has an
     Autoconf `configure' script, how do I bootstrap?  It seems
     like a chicken and egg problem!

   This is a misunderstanding.  Although GNU `m4' does come with a
`configure' script produced by Autoconf, Autoconf is not required in
order to run the script and install GNU `m4'.  Autoconf is only
required if you want to change the `m4' `configure' script, which few
people have to do (mainly its maintainer).


File: autoconf.info,  Node: Why Not Imake,  Prev: Bootstrapping,  Up: Questions

Why Not Imake?
==============

     Why not use Imake instead of `configure' scripts?

   Several people have written addressing this question, so I include
adaptations of their explanations here.

   The following answer is based on one written by Richard Pixley:

   Autoconf generated scripts frequently work on machines which it has
never been set up to handle before.  That is, it does a good job of
inferring a configuration for a new system.  Imake cannot do this.

   Imake uses a common database of host specific data.  For X11, this
makes sense because the distribution is made as a collection of tools,
by one central authority who has control over the database.

   GNU tools are not released this way.  Each GNU tool has a maintainer;
these maintainers are scattered across the world.  Using a common
database would be a maintenance nightmare.  Autoconf may appear to be
this kind of database, but in fact it is not.  Instead of listing host
dependencies, it lists program requirements.

   If you view the GNU suite as a collection of native tools, then the
problems are similar.  But the GNU development tools can be configured
as cross tools in almost any host+target permutation.  All of these
configurations can be installed concurrently.  They can even be
configured to share host independent files across hosts.  Imake doesn't
address these issues.

   Imake templates are a form of standardization.  The GNU coding
standards address the same issues without necessarily imposing the same
restrictions.

   Here is some further explanation, written by Per Bothner:

   One of the advantages of Imake is that it easy to generate large
Makefiles using `cpp''s `#include' and macro mechanisms.  However,
`cpp' is not programmable: it has limited conditional facilities, and
no looping.  And `cpp' cannot inspect its environment.

   All of these problems are solved by using `sh' instead of `cpp'.
The shell is fully programmable, has macro substitution, can execute
(or source) other shell scripts, and can inspect its environment.

   Paul Eggert elaborates more:

   With Autoconf, installers need not assume that Imake itself is
already installed and working well.  This may not seem like much of an
advantage to people who are accustomed to Imake.  But on many hosts
Imake is not installed or the default installation is not working well,
and requiring Imake to install a package hinders the acceptance of that
package on those hosts.  For example, the Imake template and
configuration files might not be installed properly on a host, or the
Imake build procedure might wrongly assume that all source files are in
one big directory tree, or the Imake configuration might assume one
compiler whereas the package or the installer needs to use another, or
there might be a version mismatch between the Imake expected by the
package and the Imake supported by the host.  These problems are much
rarer with Autoconf, where each package comes with its own independent
configuration processor.

   Also, Imake often suffers from unexpected interactions between
`make' and the installer's C preprocessor.  The fundamental problem
here is that the C preprocessor was designed to preprocess C programs,
not `Makefile's.  This is much less of a problem with Autoconf, which
uses the general-purpose preprocessor `m4', and where the package's
author (rather than the installer) does the preprocessing in a standard
way.

   Finally, Mark Eichin notes:

   Imake isn't all that extensible, either.  In order to add new
features to Imake, you need to provide your own project template, and
duplicate most of the features of the existing one.  This means that
for a sophisticated project, using the vendor-provided Imake templates
fails to provide any leverage--since they don't cover anything that
your own project needs (unless it is an X11 program).

   On the other side, though:

   The one advantage that Imake has over `configure': `Imakefile's tend
to be much shorter (likewise, less redundant) than `Makefile.in's.
There is a fix to this, however--at least for the Kerberos V5 tree,
we've modified things to call in common `post.in' and `pre.in'
`Makefile' fragments for the entire tree.  This means that a lot of
common things don't have to be duplicated, even though they normally
are in `configure' setups.


File: autoconf.info,  Node: Upgrading,  Next: History,  Prev: Questions,  Up: Top

Upgrading From Version 1
************************

   Autoconf version 2 is mostly backward compatible with version 1.
However, it introduces better ways to do some things, and doesn't
support some of the ugly things in version 1.  So, depending on how
sophisticated your `configure.in' files are, you might have to do some
manual work in order to upgrade to version 2.  This chapter points out
some problems to watch for when upgrading.  Also, perhaps your
`configure' scripts could benefit from some of the new features in
version 2; the changes are summarized in the file `NEWS' in the
Autoconf distribution.

   First, make sure you have GNU `m4' version 1.1 or higher installed,
preferably 1.3 or higher.  Versions before 1.1 have bugs that prevent
them from working with Autoconf version 2.  Versions 1.3 and later are
much faster than earlier versions, because as of version 1.3, GNU `m4'
has a more efficient implementation of diversions and can freeze its
internal state in a file that it can read back quickly.

* Menu:

* Changed File Names::          Files you might rename.
* Changed Makefiles::           New things to put in `Makefile.in'.
* Changed Macros::              Macro calls you might replace.
* Invoking autoupdate::         Replacing old macro names in `configure.in'.
* Changed Results::             Changes in how to check test results.
* Changed Macro Writing::       Better ways to write your own macros.


File: autoconf.info,  Node: Changed File Names,  Next: Changed Makefiles,  Prev: Upgrading,  Up: Upgrading

Changed File Names
==================

   If you have an `aclocal.m4' installed with Autoconf (as opposed to
in a particular package's source directory), you must rename it to
`acsite.m4'.  *Note Invoking autoconf::.

   If you distribute `install.sh' with your package, rename it to
`install-sh' so `make' builtin rules won't inadvertently create a file
called `install' from it.  `AC_PROG_INSTALL' looks for the script under
both names, but it is best to use the new name.

   If you were using `config.h.top' or `config.h.bot', you still can,
but you will have less clutter if you merge them into `acconfig.h'.
*Note Invoking autoheader::.


File: autoconf.info,  Node: Changed Makefiles,  Next: Changed Macros,  Prev: Changed File Names,  Up: Upgrading

Changed Makefiles
=================

   Add `@CFLAGS@', `@CPPFLAGS@', and `@LDFLAGS@' in your `Makefile.in'
files, so they can take advantage of the values of those variables in
the environment when `configure' is run.  Doing this isn't necessary,
but it's a convenience for users.

   Also add `@configure_input@' in a comment to each non-`Makefile'
input file for `AC_OUTPUT', so that the output files will contain a
comment saying they were produced by `configure'.  Automatically
selecting the right comment syntax for all the kinds of files that
people call `AC_OUTPUT' on became too much work.

   Add `config.log' and `config.cache' to the list of files you remove
in `distclean' targets.

   If you have the following in `Makefile.in':

     prefix = /usr/local
     exec_prefix = ${prefix}

you must change it to:

     prefix = @prefix@
     exec_prefix = @exec_prefix@

The old behavior of replacing those variables without `@' characters
around them has been removed.


File: autoconf.info,  Node: Changed Macros,  Next: Invoking autoupdate,  Prev: Changed Makefiles,  Up: Upgrading

Changed Macros
==============

   Many of the macros were renamed in Autoconf version 2.  You can still
use the old names, but the new ones are clearer, and it's easier to find
the documentation for them.  *Note Old Macro Names::, for a table
showing the new names for the old macros.  Use the `autoupdate' program
to convert your `configure.in' to using the new macro names.  *Note
Invoking autoupdate::.

   Some macros have been superseded by similar ones that do the job
better, but are not call-compatible.  If you get warnings about calling
obsolete macros while running `autoconf', you may safely ignore them,
but your `configure' script will generally work better if you follow
the advice it prints about what to replace the obsolete macros with.  In
particular, the mechanism for reporting the results of tests has
changed.  If you were using `echo' or `AC_VERBOSE' (perhaps via
`AC_COMPILE_CHECK'), your `configure' script's output will look better
if you switch to `AC_MSG_CHECKING' and `AC_MSG_RESULT'.  *Note Printing
Messages::.  Those macros work best in conjunction with cache
variables.  *Note Caching Results::.


File: autoconf.info,  Node: Invoking autoupdate,  Next: Changed Results,  Prev: Changed Macros,  Up: Upgrading

Using `autoupdate' to Modernize `configure'
===========================================

   The `autoupdate' program updates a `configure.in' file that calls
Autoconf macros by their old names to use the current macro names.  In
version 2 of Autoconf, most of the macros were renamed to use a more
uniform and descriptive naming scheme.  *Note Macro Names::, for a
description of the new scheme.  Although the old names still work
(*note Old Macro Names::., for a list of the old macro names and the
corresponding new names), you can make your `configure.in' files more
readable and make it easier to use the current Autoconf documentation
if you update them to use the new macro names.

   If given no arguments, `autoupdate' updates `configure.in', backing
up the original version with the suffix `~' (or the value of the
environment variable `SIMPLE_BACKUP_SUFFIX', if that is set).  If you
give `autoupdate' an argument, it reads that file instead of
`configure.in' and writes the updated file to the standard output.

`autoupdate' accepts the following options:

`--help'
`-h'
     Print a summary of the command line options and exit.

`--macrodir=DIR'
`-m DIR'
     Look for the Autoconf macro files in directory DIR instead of the
     default installation directory.  You can also set the `AC_MACRODIR'
     environment variable to a directory; this option overrides the
     environment variable.

`--version'
     Print the version number of `autoupdate' and exit.


File: autoconf.info,  Node: Changed Results,  Next: Changed Macro Writing,  Prev: Invoking autoupdate,  Up: Upgrading

Changed Results
===============

   If you were checking the results of previous tests by examining the
shell variable `DEFS', you need to switch to checking the values of the
cache variables for those tests.  `DEFS' no longer exists while
`configure' is running; it is only created when generating output
files.  This difference from version 1 is because properly quoting the
contents of that variable turned out to be too cumbersome and
inefficient to do every time `AC_DEFINE' is called.  *Note Cache
Variable Names::.

   For example, here is a `configure.in' fragment written for Autoconf
version 1:

     AC_HAVE_FUNCS(syslog)
     case "$DEFS" in
     *-DHAVE_SYSLOG*) ;;
     *) # syslog is not in the default libraries.  See if it's in some other.
       saved_LIBS="$LIBS"
       for lib in bsd socket inet; do
         AC_CHECKING(for syslog in -l$lib)
         LIBS="$saved_LIBS -l$lib"
         AC_HAVE_FUNCS(syslog)
         case "$DEFS" in
         *-DHAVE_SYSLOG*) break ;;
         *) ;;
         esac
         LIBS="$saved_LIBS"
       done ;;
     esac

   Here is a way to write it for version 2:

     AC_CHECK_FUNCS(syslog)
     if test $ac_cv_func_syslog = no; then
       # syslog is not in the default libraries.  See if it's in some other.
       for lib in bsd socket inet; do
         AC_CHECK_LIB($lib, syslog, [AC_DEFINE(HAVE_SYSLOG)
           LIBS="$LIBS $lib"; break])
       done
     fi

   If you were working around bugs in `AC_DEFINE_UNQUOTED' by adding
backslashes before quotes, you need to remove them.  It now works
predictably, and does not treat quotes (except backquotes) specially.
*Note Setting Output Variables::.

   All of the boolean shell variables set by Autoconf macros now use
`yes' for the true value.  Most of them use `no' for false, though for
backward compatibility some use the empty string instead.  If you were
relying on a shell variable being set to something like 1 or `t' for
true, you need to change your tests.


File: autoconf.info,  Node: Changed Macro Writing,  Prev: Changed Results,  Up: Upgrading

Changed Macro Writing
=====================

   When defining your own macros, you should now use `AC_DEFUN' instead
of `define'.  `AC_DEFUN' automatically calls `AC_PROVIDE' and ensures
that macros called via `AC_REQUIRE' do not interrupt other macros, to
prevent nested `checking...' messages on the screen.  There's no actual
harm in continuing to use the older way, but it's less convenient and
attractive.  *Note Macro Definitions::.

   You probably looked at the macros that came with Autoconf as a guide
for how to do things.  It would be a good idea to take a look at the new
versions of them, as the style is somewhat improved and they take
advantage of some new features.

   If you were doing tricky things with undocumented Autoconf internals
(macros, variables, diversions), check whether you need to change
anything to account for changes that have been made.  Perhaps you can
even use an officially supported technique in version 2 instead of
kludging.  Or perhaps not.

   To speed up your locally written feature tests, add caching to them.
See whether any of your tests are of general enough usefulness to
encapsulate into macros that you can share.


File: autoconf.info,  Node: History,  Next: Old Macro Names,  Prev: Upgrading,  Up: Top

History of Autoconf
*******************

   You may be wondering, Why was Autoconf originally written?  How did
it get into its present form?  (Why does it look like gorilla spit?)  If
you're not wondering, then this chapter contains no information useful
to you, and you might as well skip it.  If you *are* wondering, then
let there be light...

* Menu:

* Genesis::                     Prehistory and naming of `configure'.
* Exodus::                      The plagues of `m4' and Perl.
* Leviticus::                   The priestly code of portability arrives.
* Numbers::                     Growth and contributors.
* Deuteronomy::                 Approaching the promises of easy configuration.


File: autoconf.info,  Node: Genesis,  Next: Exodus,  Prev: History,  Up: History

Genesis
=======

   In June 1991 I was maintaining many of the GNU utilities for the Free
Software Foundation.  As they were ported to more platforms and more
programs were added, the number of `-D' options that users had to
select in the `Makefile' (around 20) became burdensome.  Especially for
me--I had to test each new release on a bunch of different systems.  So
I wrote a little shell script to guess some of the correct settings for
the fileutils package, and released it as part of fileutils 2.0.  That
`configure' script worked well enough that the next month I adapted it
(by hand) to create similar `configure' scripts for several other GNU
utilities packages.  Brian Berliner also adapted one of my scripts for
his CVS revision control system.

   Later that summer, I learned that Richard Stallman and Richard Pixley
were developing similar scripts to use in the GNU compiler tools; so I
adapted my `configure' scripts to support their evolving interface:
using the file name `Makefile.in' as the templates; adding `+srcdir',
the first option (of many); and creating `config.status' files.


File: autoconf.info,  Node: Exodus,  Next: Leviticus,  Prev: Genesis,  Up: History

Exodus
======

   As I got feedback from users, I incorporated many improvements, using
Emacs to search and replace, cut and paste, similar changes in each of
the scripts.  As I adapted more GNU utilities packages to use
`configure' scripts, updating them all by hand became impractical.
Rich Murphey, the maintainer of the GNU graphics utilities, sent me mail
saying that the `configure' scripts were great, and asking if I had a
tool for generating them that I could send him.  No, I thought, but I
should!  So I started to work out how to generate them.  And the
journey from the slavery of hand-written `configure' scripts to the
abundance and ease of Autoconf began.

   Cygnus `configure', which was being developed at around that time,
is table driven; it is meant to deal mainly with a discrete number of
system types with a small number of mainly unguessable features (such as
details of the object file format).  The automatic configuration system
that Brian Fox had developed for Bash takes a similar approach.  For
general use, it seems to me a hopeless cause to try to maintain an
up-to-date database of which features each variant of each operating
system has.  It's easier and more reliable to check for most features on
the fly--especially on hybrid systems that people have hacked on
locally or that have patches from vendors installed.

   I considered using an architecture similar to that of Cygnus
`configure', where there is a single `configure' script that reads
pieces of `configure.in' when run.  But I didn't want to have to
distribute all of the feature tests with every package, so I settled on
having a different `configure' made from each `configure.in' by a
preprocessor.  That approach also offered more control and flexibility.

   I looked briefly into using the Metaconfig package, by Larry Wall,
Harlan Stenn, and Raphael Manfredi, but I decided not to for several
reasons.  The `Configure' scripts it produces are interactive, which I
find quite inconvenient; I didn't like the ways it checked for some
features (such as library functions); I didn't know that it was still
being maintained, and the `Configure' scripts I had seen didn't work on
many modern systems (such as System V R4 and NeXT); it wasn't very
flexible in what it could do in response to a feature's presence or
absence; I found it confusing to learn; and it was too big and complex
for my needs (I didn't realize then how much Autoconf would eventually
have to grow).

   I considered using Perl to generate my style of `configure' scripts,
but decided that `m4' was better suited to the job of simple textual
substitutions: it gets in the way less, because output is implicit.
Plus, everyone already has it.  (Initially I didn't rely on the GNU
extensions to `m4'.)  Also, some of my friends at the University of
Maryland had recently been putting `m4' front ends on several programs,
including `tvtwm', and I was interested in trying out a new language.


File: autoconf.info,  Node: Leviticus,  Next: Numbers,  Prev: Exodus,  Up: History

Leviticus
=========

   Since my `configure' scripts determine the system's capabilities
automatically, with no interactive user intervention, I decided to call
the program that generates them Autoconfig.  But with a version number
tacked on, that name would be too long for old UNIX file systems, so I
shortened it to Autoconf.

   In the fall of 1991 I called together a group of fellow questers
after the Holy Grail of portability (er, that is, alpha testers) to
give me feedback as I encapsulated pieces of my handwritten scripts in
`m4' macros and continued to add features and improve the techniques
used in the checks.  Prominent among the testers were Franc,ois Pinard,
who came up with the idea of making an `autoconf' shell script to run
`m4' and check for unresolved macro calls; Richard Pixley, who
suggested running the compiler instead of searching the file system to
find include files and symbols, for more accurate results; Karl Berry,
who got Autoconf to configure TeX and added the macro index to the
documentation; and Ian Taylor, who added support for creating a C
header file as an alternative to putting `-D' options in a `Makefile',
so he could use Autoconf for his UUCP package.  The alpha testers
cheerfully adjusted their files again and again as the names and
calling conventions of the Autoconf macros changed from release to
release.  They all contributed many specific checks, great ideas, and
bug fixes.


File: autoconf.info,  Node: Numbers,  Next: Deuteronomy,  Prev: Leviticus,  Up: History

Numbers
=======

   In July 1992, after months of alpha testing, I released Autoconf 1.0,
and converted many GNU packages to use it.  I was surprised by how
positive the reaction to it was.  More people started using it than I
could keep track of, including people working on software that wasn't
part of the GNU Project (such as TCL, FSP, and Kerberos V5).  Autoconf
continued to improve rapidly, as many people using the `configure'
scripts reported problems they encountered.

   Autoconf turned out to be a good torture test for `m4'
implementations.  UNIX `m4' started to dump core because of the length
of the macros that Autoconf defined, and several bugs showed up in GNU
`m4' as well.  Eventually, we realized that we needed to use some
features that only GNU `m4' has.  4.3BSD `m4', in particular, has an
impoverished set of builtin macros; the System V version is better, but
still doesn't provide everything we need.

   More development occurred as people put Autoconf under more stresses
(and to uses I hadn't anticipated).  Karl Berry added checks for X11.
david zuhn contributed C++ support.  Franc,ois Pinard made it diagnose
invalid arguments.  Jim Blandy bravely coerced it into configuring GNU
Emacs, laying the groundwork for several later improvements.  Roland
McGrath got it to configure the GNU C Library, wrote the `autoheader'
script to automate the creation of C header file templates, and added a
`--verbose' option to `configure'.  Noah Friedman added the
`--macrodir' option and `AC_MACRODIR' environment variable.  (He also
coined the term "autoconfiscate" to mean "adapt a software package to
use Autoconf".)  Roland and Noah improved the quoting protection in
`AC_DEFINE' and fixed many bugs, especially when I got sick of dealing
with portability problems from February through June, 1993.


File: autoconf.info,  Node: Deuteronomy,  Prev: Numbers,  Up: History

Deuteronomy
===========

   A long wish list for major features had accumulated, and the effect
of several years of patching by various people had left some residual
cruft.  In April 1994, while working for Cygnus Support, I began a major
revision of Autoconf.  I added most of the features of the Cygnus
`configure' that Autoconf had lacked, largely by adapting the relevant
parts of Cygnus `configure' with the help of david zuhn and Ken
Raeburn.  These features include support for using `config.sub',
`config.guess', `--host', and `--target'; making links to files; and
running `configure' scripts in subdirectories.  Adding these features
enabled Ken to convert GNU `as', and Rob Savoye to convert DejaGNU, to
using Autoconf.

   I added more features in response to other peoples' requests.  Many
people had asked for `configure' scripts to share the results of the
checks between runs, because (particularly when configuring a large
source tree, like Cygnus does) they were frustratingly slow.  Mike
Haertel suggested adding site-specific initialization scripts.  People
distributing software that had to unpack on MS-DOS asked for a way to
override the `.in' extension on the file names, which produced file
names like `config.h.in' containing two dots.  Jim Avera did an
extensive examination of the problems with quoting in `AC_DEFINE' and
`AC_SUBST'; his insights led to significant improvements.  Richard
Stallman asked that compiler output be sent to `config.log' instead of
`/dev/null', to help people debug the Emacs `configure' script.

   I made some other changes because of my dissatisfaction with the
quality of the program.  I made the messages showing results of the
checks less ambiguous, always printing a result.  I regularized the
names of the macros and cleaned up coding style inconsistencies.  I
added some auxiliary utilities that I had developed to help convert
source code packages to use Autoconf.  With the help of Franc,ois
Pinard, I made the macros not interrupt each others' messages.  (That
feature revealed some performance bottlenecks in GNU `m4', which he
hastily corrected!) I reorganized the documentation around problems
people want to solve.  And I began a testsuite, because experience had
shown that Autoconf has a pronounced tendency to regress when we change
it.

   Again, several alpha testers gave invaluable feedback, especially
Franc,ois Pinard, Jim Meyering, Karl Berry, Rob Savoye, Ken Raeburn,
and Mark Eichin.

   Finally, version 2.0 was ready.  And there was much rejoicing.  (And
I have free time again.  I think.  Yeah, right.)


File: autoconf.info,  Node: Old Macro Names,  Next: Environment Variable Index,  Prev: History,  Up: Top

Old Macro Names
***************

   In version 2 of Autoconf, most of the macros were renamed to use a
more uniform and descriptive naming scheme.  Here are the old names of
the macros that were renamed, followed by the current names of those
macros.  Although the old names are still accepted by the `autoconf'
program for backward compatibility, the old names are considered
obsolete.  *Note Macro Names::, for a description of the new naming
scheme.

`AC_ALLOCA'
     `AC_FUNC_ALLOCA'

`AC_ARG_ARRAY'
     removed because of limited usefulness

`AC_CHAR_UNSIGNED'
     `AC_C_CHAR_UNSIGNED'

`AC_CONST'
     `AC_C_CONST'

`AC_CROSS_CHECK'
     `AC_C_CROSS'

`AC_ERROR'
     `AC_MSG_ERROR'

`AC_FIND_X'
     `AC_PATH_X'

`AC_FIND_XTRA'
     `AC_PATH_XTRA'

`AC_FUNC_CHECK'
     `AC_CHECK_FUNC'

`AC_GCC_TRADITIONAL'
     `AC_PROG_GCC_TRADITIONAL'

`AC_GETGROUPS_T'
     `AC_TYPE_GETGROUPS'

`AC_GETLOADAVG'
     `AC_FUNC_GETLOADAVG'

`AC_HAVE_FUNCS'
     `AC_CHECK_FUNCS'

`AC_HAVE_HEADERS'
     `AC_CHECK_HEADERS'

`AC_HAVE_POUNDBANG'
     `AC_SYS_INTERPRETER' (different calling convention)

`AC_HEADER_CHECK'
     `AC_CHECK_HEADER'

`AC_HEADER_EGREP'
     `AC_EGREP_HEADER'

`AC_INLINE'
     `AC_C_INLINE'

`AC_LN_S'
     `AC_PROG_LN_S'

`AC_LONG_DOUBLE'
     `AC_C_LONG_DOUBLE'

`AC_LONG_FILE_NAMES'
     `AC_SYS_LONG_FILE_NAMES'

`AC_MAJOR_HEADER'
     `AC_HEADER_MAJOR'

`AC_MINUS_C_MINUS_O'
     `AC_PROG_CC_C_O'

`AC_MMAP'
     `AC_FUNC_MMAP'

`AC_MODE_T'
     `AC_TYPE_MODE_T'

`AC_OFF_T'
     `AC_TYPE_OFF_T'

`AC_PID_T'
     `AC_TYPE_PID_T'

`AC_PREFIX'
     `AC_PREFIX_PROGRAM'

`AC_PROGRAMS_CHECK'
     `AC_CHECK_PROGS'

`AC_PROGRAMS_PATH'
     `AC_PATH_PROGS'

`AC_PROGRAM_CHECK'
     `AC_CHECK_PROG'

`AC_PROGRAM_EGREP'
     `AC_EGREP_CPP'

`AC_PROGRAM_PATH'
     `AC_PATH_PROG'

`AC_REMOTE_TAPE'
     removed because of limited usefulness

`AC_RESTARTABLE_SYSCALLS'
     `AC_SYS_RESTARTABLE_SYSCALLS'

`AC_RETSIGTYPE'
     `AC_TYPE_SIGNAL'

`AC_RSH'
     removed because of limited usefulness

`AC_SETVBUF_REVERSED'
     `AC_FUNC_SETVBUF_REVERSED'

`AC_SET_MAKE'
     `AC_PROG_MAKE_SET'

`AC_SIZEOF_TYPE'
     `AC_CHECK_SIZEOF'

`AC_SIZE_T'
     `AC_TYPE_SIZE_T'

`AC_STAT_MACROS_BROKEN'
     `AC_HEADER_STAT'

`AC_STDC_HEADERS'
     `AC_HEADER_STDC'

`AC_STRCOLL'
     `AC_FUNC_STRCOLL'

`AC_ST_BLKSIZE'
     `AC_STRUCT_ST_BLKSIZE'

`AC_ST_BLOCKS'
     `AC_STRUCT_ST_BLOCKS'

`AC_ST_RDEV'
     `AC_STRUCT_ST_RDEV'

`AC_SYS_SIGLIST_DECLARED'
     `AC_DECL_SYS_SIGLIST'

`AC_TEST_CPP'
     `AC_TRY_CPP'

`AC_TEST_PROGRAM'
     `AC_TRY_RUN'

`AC_TIMEZONE'
     `AC_STRUCT_TIMEZONE'

`AC_TIME_WITH_SYS_TIME'
     `AC_HEADER_TIME'

`AC_UID_T'
     `AC_TYPE_UID_T'

`AC_UTIME_NULL'
     `AC_FUNC_UTIME_NULL'

`AC_VFORK'
     `AC_FUNC_VFORK'

`AC_VPRINTF'
     `AC_FUNC_VPRINTF'

`AC_WAIT3'
     `AC_FUNC_WAIT3'

`AC_WARN'
     `AC_MSG_WARN'

`AC_WORDS_BIGENDIAN'
     `AC_C_BIGENDIAN'

`AC_YYTEXT_POINTER'
     `AC_DECL_YYTEXT'


File: autoconf.info,  Node: Environment Variable Index,  Next: Output Variable Index,  Prev: Old Macro Names,  Up: Top

Environment Variable Index
**************************

   This is an alphabetical list of the environment variables that
Autoconf checks.

* Menu:

* AC_MACRODIR <1>:                       Invoking autoupdate.
* AC_MACRODIR <2>:                       Invoking autoheader.
* AC_MACRODIR <3>:                       Invoking autoreconf.
* AC_MACRODIR <4>:                       Invoking autoconf.
* AC_MACRODIR <5>:                       Invoking ifnames.
* AC_MACRODIR:                           Invoking autoscan.
* CONFIG_FILES:                          Invoking config.status.
* CONFIG_HEADERS:                        Invoking config.status.
* CONFIG_SHELL:                          Invoking config.status.
* CONFIG_SITE:                           Site Defaults.
* CONFIG_STATUS:                         Invoking config.status.
* SIMPLE_BACKUP_SUFFIX:                  Invoking autoupdate.


File: autoconf.info,  Node: Output Variable Index,  Next: Preprocessor Symbol Index,  Prev: Environment Variable Index,  Up: Top

Output Variable Index
*********************

   This is an alphabetical list of the variables that Autoconf can
substitute into files that it creates, typically one or more
`Makefile's.  *Note Setting Output Variables::, for more information on
how this is done.

* Menu:

* ALLOCA:                                Particular Functions.
* AWK:                                   Particular Programs.
* bindir:                                Preset Output Variables.
* build:                                 System Type Variables.
* build_alias:                           System Type Variables.
* build_cpu:                             System Type Variables.
* build_os:                              System Type Variables.
* build_vendor:                          System Type Variables.
* CC <1>:                                UNIX Variants.
* CC:                                    Particular Programs.
* CFLAGS <1>:                            Particular Programs.
* CFLAGS:                                Preset Output Variables.
* configure_input:                       Preset Output Variables.
* CPP:                                   Particular Programs.
* CPPFLAGS:                              Preset Output Variables.
* CXX:                                   Particular Programs.
* CXXCPP:                                Particular Programs.
* CXXFLAGS <1>:                          Particular Programs.
* CXXFLAGS:                              Preset Output Variables.
* datadir:                               Preset Output Variables.
* DEFS:                                  Preset Output Variables.
* exec_prefix:                           Preset Output Variables.
* EXEEXT:                                System Services.
* F77:                                   Particular Programs.
* FFLAGS <1>:                            Particular Programs.
* FFLAGS:                                Preset Output Variables.
* FLIBS:                                 Fortran 77 Compiler Characteristics.
* host:                                  System Type Variables.
* host_alias:                            System Type Variables.
* host_cpu:                              System Type Variables.
* host_os:                               System Type Variables.
* host_vendor:                           System Type Variables.
* includedir:                            Preset Output Variables.
* infodir:                               Preset Output Variables.
* INSTALL:                               Particular Programs.
* INSTALL_DATA:                          Particular Programs.
* INSTALL_PROGRAM:                       Particular Programs.
* INSTALL_SCRIPT:                        Particular Programs.
* KMEM_GROUP:                            Particular Functions.
* LDFLAGS:                               Preset Output Variables.
* LEX:                                   Particular Programs.
* LEX_OUTPUT_ROOT:                       Particular Programs.
* LEXLIB:                                Particular Programs.
* libdir:                                Preset Output Variables.
* libexecdir:                            Preset Output Variables.
* LIBOBJS <1>:                           Structures.
* LIBOBJS <2>:                           Generic Functions.
* LIBOBJS:                               Particular Functions.
* LIBS <1>:                              UNIX Variants.
* LIBS:                                  Preset Output Variables.
* LN_S:                                  Particular Programs.
* localstatedir:                         Preset Output Variables.
* mandir:                                Preset Output Variables.
* NEED_SETGID:                           Particular Functions.
* OBJEXT:                                System Services.
* oldincludedir:                         Preset Output Variables.
* prefix:                                Preset Output Variables.
* program_transform_name:                Transforming Names.
* RANLIB:                                Particular Programs.
* sbindir:                               Preset Output Variables.
* SET_MAKE:                              Output.
* sharedstatedir:                        Preset Output Variables.
* srcdir:                                Preset Output Variables.
* subdirs:                               Subdirectories.
* sysconfdir:                            Preset Output Variables.
* target:                                System Type Variables.
* target_alias:                          System Type Variables.
* target_cpu:                            System Type Variables.
* target_os:                             System Type Variables.
* target_vendor:                         System Type Variables.
* top_srcdir:                            Preset Output Variables.
* X_CFLAGS:                              System Services.
* X_EXTRA_LIBS:                          System Services.
* X_LIBS:                                System Services.
* X_PRE_LIBS:                            System Services.
* YACC:                                  Particular Programs.


File: autoconf.info,  Node: Preprocessor Symbol Index,  Next: Macro Index,  Prev: Output Variable Index,  Up: Top

Preprocessor Symbol Index
*************************

   This is an alphabetical list of the C preprocessor symbols that the
Autoconf macros define.  To work with Autoconf, C source code needs to
use these names in `#if' directives.

* Menu:

* __CHAR_UNSIGNED__:                     C Compiler Characteristics.
* _ALL_SOURCE:                           UNIX Variants.
* _MINIX:                                UNIX Variants.
* _POSIX_1_SOURCE:                       UNIX Variants.
* _POSIX_SOURCE:                         UNIX Variants.
* _POSIX_VERSION:                        Particular Headers.
* C_ALLOCA:                              Particular Functions.
* CLOSEDIR_VOID:                         Particular Functions.
* const:                                 C Compiler Characteristics.
* DGUX:                                  Particular Functions.
* DIRENT:                                Particular Headers.
* F77_NO_MINUS_C_MINUS_O:                Particular Programs.
* GETGROUPS_T:                           Particular Typedefs.
* GETLODAVG_PRIVILEGED:                  Particular Functions.
* GETPGRP_VOID:                          Particular Functions.
* gid_t:                                 Particular Typedefs.
* HAVE_ALLOCA_H:                         Particular Functions.
* HAVE_CONFIG_H:                         Configuration Headers.
* HAVE_DIRENT_H:                         Particular Headers.
* HAVE_DOPRNT:                           Particular Functions.
* HAVE_FUNCTION:                         Generic Functions.
* HAVE_GETMNTENT:                        Particular Functions.
* HAVE_HEADER:                           Generic Headers.
* HAVE_LONG_DOUBLE:                      C Compiler Characteristics.
* HAVE_LONG_FILE_NAMES:                  System Services.
* HAVE_MMAP:                             Particular Functions.
* HAVE_NDIR_H:                           Particular Headers.
* HAVE_RESTARTABLE_SYSCALLS:             System Services.
* HAVE_ST_BLKSIZE:                       Structures.
* HAVE_ST_BLOCKS:                        Structures.
* HAVE_ST_RDEV:                          Structures.
* HAVE_STRCOLL:                          Particular Functions.
* HAVE_STRFTIME:                         Particular Functions.
* HAVE_STRINGIZE:                        C Compiler Characteristics.
* HAVE_SYS_DIR_H:                        Particular Headers.
* HAVE_SYS_NDIR_H:                       Particular Headers.
* HAVE_SYS_WAIT_H:                       Particular Headers.
* HAVE_TM_ZONE:                          Structures.
* HAVE_TZNAME:                           Structures.
* HAVE_UNISTD_H:                         Particular Headers.
* HAVE_UTIME_NULL:                       Particular Functions.
* HAVE_VFORK_H:                          Particular Functions.
* HAVE_VPRINTF:                          Particular Functions.
* HAVE_WAIT3:                            Particular Functions.
* inline:                                C Compiler Characteristics.
* INT_16_BITS:                           C Compiler Characteristics.
* LONG_64_BITS:                          C Compiler Characteristics.
* MAJOR_IN_MKDEV:                        Particular Headers.
* MAJOR_IN_SYSMACROS:                    Particular Headers.
* mode_t:                                Particular Typedefs.
* NDIR:                                  Particular Headers.
* NEED_MEMORY_H:                         Particular Headers.
* NEED_SETGID:                           Particular Functions.
* NLIST_NAME_UNION:                      Particular Functions.
* NLIST_STRUCT:                          Particular Functions.
* NO_MINUS_C_MINUS_O:                    Particular Programs.
* off_t:                                 Particular Typedefs.
* pid_t:                                 Particular Typedefs.
* RETSIGTYPE:                            Particular Typedefs.
* SELECT_TYPE_ARG1:                      Particular Functions.
* SELECT_TYPE_ARG234:                    Particular Functions.
* SELECT_TYPE_ARG5:                      Particular Functions.
* SETPGRP_VOID:                          Particular Functions.
* SETVBUF_REVERSED:                      Particular Functions.
* size_t:                                Particular Typedefs.
* STDC_HEADERS:                          Particular Headers.
* SVR4:                                  Particular Functions.
* SYS_SIGLIST_DECLARED:                  Particular Headers.
* SYSDIR:                                Particular Headers.
* SYSNDIR:                               Particular Headers.
* TIME_WITH_SYS_TIME:                    Structures.
* TM_IN_SYS_TIME:                        Structures.
* uid_t:                                 Particular Typedefs.
* UMAX:                                  Particular Functions.
* UMAX4_3:                               Particular Functions.
* USG:                                   Particular Headers.
* vfork:                                 Particular Functions.
* VOID_CLOSEDIR:                         Particular Headers.
* WORDS_BIGENDIAN:                       C Compiler Characteristics.
* YYTEXT_POINTER:                        Particular Programs.


File: autoconf.info,  Node: Macro Index,  Prev: Preprocessor Symbol Index,  Up: Top

Macro Index
***********

   This is an alphabetical list of the Autoconf macros.  To make the
list easier to use, the macros are listed without their preceding `AC_'.

* Menu:

* AIX:                                   UNIX Variants.
* ALLOCA:                                Old Macro Names.
* ARG_ARRAY:                             Old Macro Names.
* ARG_ENABLE:                            Package Options.
* ARG_PROGRAM:                           Transforming Names.
* ARG_WITH:                              External Software.
* BEFORE:                                Suggested Ordering.
* C_BIGENDIAN:                           C Compiler Characteristics.
* C_CHAR_UNSIGNED:                       C Compiler Characteristics.
* C_CONST:                               C Compiler Characteristics.
* C_CROSS:                               Test Programs.
* C_INLINE:                              C Compiler Characteristics.
* C_LONG_DOUBLE:                         C Compiler Characteristics.
* C_STRINGIZE:                           C Compiler Characteristics.
* CACHE_CHECK:                           Caching Results.
* CACHE_LOAD:                            Caching Results.
* CACHE_SAVE:                            Caching Results.
* CACHE_VAL:                             Caching Results.
* CANONICAL_HOST:                        Canonicalizing.
* CANONICAL_SYSTEM:                      Canonicalizing.
* CHAR_UNSIGNED:                         Old Macro Names.
* CHECK_FILE:                            Generic Programs.
* CHECK_FILES:                           Generic Programs.
* CHECK_FUNC:                            Generic Functions.
* CHECK_FUNCS:                           Generic Functions.
* CHECK_HEADER:                          Generic Headers.
* CHECK_HEADERS:                         Generic Headers.
* CHECK_LIB:                             Libraries.
* CHECK_PROG:                            Generic Programs.
* CHECK_PROGS:                           Generic Programs.
* CHECK_SIZEOF:                          C Compiler Characteristics.
* CHECK_TOOL:                            Generic Programs.
* CHECK_TYPE:                            Generic Typedefs.
* CHECKING:                              Printing Messages.
* COMPILE_CHECK:                         Examining Libraries.
* CONFIG_AUX_DIR:                        Input.
* CONFIG_HEADER:                         Configuration Headers.
* CONFIG_SUBDIRS:                        Subdirectories.
* CONST:                                 Old Macro Names.
* CROSS_CHECK:                           Old Macro Names.
* CYGWIN:                                System Services.
* DECL_SYS_SIGLIST:                      Particular Headers.
* DECL_YYTEXT:                           Particular Programs.
* DEFINE:                                Defining Symbols.
* DEFINE_UNQUOTED:                       Defining Symbols.
* DEFUN:                                 Macro Definitions.
* DIR_HEADER:                            Particular Headers.
* DYNIX_SEQ:                             UNIX Variants.
* EGREP_CPP:                             Examining Declarations.
* EGREP_HEADER:                          Examining Declarations.
* ENABLE:                                Package Options.
* ERROR:                                 Old Macro Names.
* EXEEXT:                                System Services.
* F77_LIBRARY_LDFLAGS:                   Fortran 77 Compiler Characteristics.
* FIND_X:                                Old Macro Names.
* FIND_XTRA:                             Old Macro Names.
* FUNC_ALLOCA:                           Particular Functions.
* FUNC_CHECK:                            Old Macro Names.
* FUNC_CLOSEDIR_VOID:                    Particular Functions.
* FUNC_FNMATCH:                          Particular Functions.
* FUNC_GETLOADAVG:                       Particular Functions.
* FUNC_GETMNTENT:                        Particular Functions.
* FUNC_GETPGRP:                          Particular Functions.
* FUNC_MEMCMP:                           Particular Functions.
* FUNC_MMAP:                             Particular Functions.
* FUNC_SELECT_ARGTYPES:                  Particular Functions.
* FUNC_SETPGRP:                          Particular Functions.
* FUNC_SETVBUF_REVERSED:                 Particular Functions.
* FUNC_STRCOLL:                          Particular Functions.
* FUNC_STRFTIME:                         Particular Functions.
* FUNC_UTIME_NULL:                       Particular Functions.
* FUNC_VFORK:                            Particular Functions.
* FUNC_VPRINTF:                          Particular Functions.
* FUNC_WAIT3:                            Particular Functions.
* GCC_TRADITIONAL:                       Old Macro Names.
* GETGROUPS_T:                           Old Macro Names.
* GETLOADAVG:                            Old Macro Names.
* HAVE_FUNCS:                            Old Macro Names.
* HAVE_HEADERS:                          Old Macro Names.
* HAVE_LIBRARY:                          Libraries.
* HAVE_POUNDBANG:                        Old Macro Names.
* HEADER_CHECK:                          Old Macro Names.
* HEADER_DIRENT:                         Particular Headers.
* HEADER_EGREP:                          Old Macro Names.
* HEADER_MAJOR:                          Particular Headers.
* HEADER_STAT:                           Structures.
* HEADER_STDC:                           Particular Headers.
* HEADER_SYS_WAIT:                       Particular Headers.
* HEADER_TIME:                           Structures.
* INIT:                                  Input.
* INLINE:                                Old Macro Names.
* INT_16_BITS:                           C Compiler Characteristics.
* IRIX_SUN:                              UNIX Variants.
* ISC_POSIX:                             UNIX Variants.
* LANG_C:                                Language Choice.
* LANG_CPLUSPLUS:                        Language Choice.
* LANG_FORTRAN77:                        Language Choice.
* LANG_RESTORE:                          Language Choice.
* LANG_SAVE:                             Language Choice.
* LINK_FILES:                            Using System Type.
* LN_S:                                  Old Macro Names.
* LONG_64_BITS:                          C Compiler Characteristics.
* LONG_DOUBLE:                           Old Macro Names.
* LONG_FILE_NAMES:                       Old Macro Names.
* MAJOR_HEADER:                          Old Macro Names.
* MEMORY_H:                              Particular Headers.
* MINGW32:                               System Services.
* MINIX:                                 UNIX Variants.
* MINUS_C_MINUS_O:                       Old Macro Names.
* MMAP:                                  Old Macro Names.
* MODE_T:                                Old Macro Names.
* MSG_CHECKING:                          Printing Messages.
* MSG_ERROR:                             Printing Messages.
* MSG_RESULT:                            Printing Messages.
* MSG_WARN:                              Printing Messages.
* OBJEXT:                                System Services.
* OBSOLETE:                              Obsolete Macros.
* OFF_T:                                 Old Macro Names.
* OUTPUT:                                Output.
* PATH_PROG:                             Generic Programs.
* PATH_PROGS:                            Generic Programs.
* PATH_X:                                System Services.
* PATH_XTRA:                             System Services.
* PID_T:                                 Old Macro Names.
* PREFIX:                                Old Macro Names.
* PREFIX_PROGRAM:                        Default Prefix.
* PREREQ:                                Versions.
* PROG_AWK:                              Particular Programs.
* PROG_CC:                               Particular Programs.
* PROG_CC_C_O:                           Particular Programs.
* PROG_CPP:                              Particular Programs.
* PROG_CXX:                              Particular Programs.
* PROG_CXXCPP:                           Particular Programs.
* PROG_F77_C_O:                          Particular Programs.
* PROG_FORTRAN:                          Particular Programs.
* PROG_GCC_TRADITIONAL:                  Particular Programs.
* PROG_INSTALL:                          Particular Programs.
* PROG_LEX:                              Particular Programs.
* PROG_LN_S:                             Particular Programs.
* PROG_MAKE_SET:                         Output.
* PROG_RANLIB:                           Particular Programs.
* PROG_YACC:                             Particular Programs.
* PROGRAM_CHECK:                         Old Macro Names.
* PROGRAM_EGREP:                         Old Macro Names.
* PROGRAM_PATH:                          Old Macro Names.
* PROGRAMS_CHECK:                        Old Macro Names.
* PROGRAMS_PATH:                         Old Macro Names.
* PROVIDE:                               Prerequisite Macros.
* REMOTE_TAPE:                           Old Macro Names.
* REPLACE_FUNCS:                         Generic Functions.
* REQUIRE:                               Prerequisite Macros.
* REQUIRE_CPP:                           Language Choice.
* RESTARTABLE_SYSCALLS:                  Old Macro Names.
* RETSIGTYPE:                            Old Macro Names.
* REVISION:                              Versions.
* RSH:                                   Old Macro Names.
* SCO_INTL:                              UNIX Variants.
* SEARCH_LIBS:                           Libraries.
* SET_MAKE:                              Old Macro Names.
* SETVBUF_REVERSED:                      Old Macro Names.
* SIZE_T:                                Old Macro Names.
* SIZEOF_TYPE:                           Old Macro Names.
* ST_BLKSIZE:                            Old Macro Names.
* ST_BLOCKS:                             Old Macro Names.
* ST_RDEV:                               Old Macro Names.
* STAT_MACROS_BROKEN <1>:                Old Macro Names.
* STAT_MACROS_BROKEN:                    Structures.
* STDC_HEADERS:                          Old Macro Names.
* STRCOLL:                               Old Macro Names.
* STRUCT_ST_BLKSIZE:                     Structures.
* STRUCT_ST_BLOCKS:                      Structures.
* STRUCT_ST_RDEV:                        Structures.
* STRUCT_TIMEZONE:                       Structures.
* STRUCT_TM:                             Structures.
* SUBST:                                 Setting Output Variables.
* SUBST_FILE:                            Setting Output Variables.
* SYS_INTERPRETER:                       System Services.
* SYS_LONG_FILE_NAMES:                   System Services.
* SYS_RESTARTABLE_SYSCALLS:              System Services.
* SYS_SIGLIST_DECLARED:                  Old Macro Names.
* TEST_CPP:                              Old Macro Names.
* TEST_PROGRAM:                          Old Macro Names.
* TIME_WITH_SYS_TIME:                    Old Macro Names.
* TIMEZONE:                              Old Macro Names.
* TRY_COMPILE:                           Examining Syntax.
* TRY_CPP:                               Examining Declarations.
* TRY_LINK:                              Examining Libraries.
* TRY_LINK_FUNC:                         Examining Libraries.
* TRY_RUN:                               Test Programs.
* TYPE_GETGROUPS:                        Particular Typedefs.
* TYPE_MODE_T:                           Particular Typedefs.
* TYPE_OFF_T:                            Particular Typedefs.
* TYPE_PID_T:                            Particular Typedefs.
* TYPE_SIGNAL:                           Particular Typedefs.
* TYPE_SIZE_T:                           Particular Typedefs.
* TYPE_UID_T:                            Particular Typedefs.
* UID_T:                                 Old Macro Names.
* UNISTD_H:                              Particular Headers.
* USG:                                   Particular Headers.
* UTIME_NULL:                            Old Macro Names.
* VALIDATE_CACHED_SYSTEM_TUPLE:          Canonicalizing.
* VERBOSE:                               Printing Messages.
* VFORK:                                 Old Macro Names.
* VPRINTF:                               Old Macro Names.
* WAIT3:                                 Old Macro Names.
* WARN:                                  Old Macro Names.
* WITH:                                  External Software.
* WORDS_BIGENDIAN:                       Old Macro Names.
* XENIX_DIR:                             UNIX Variants.
* YYTEXT_POINTER:                        Old Macro Names.



Tag Table:
Node: Top1209
Node: Introduction9711
Node: Making configure Scripts13551
Node: Writing configure.in16632
Node: Invoking autoscan20365
Node: Invoking ifnames22670
Node: Invoking autoconf24160
Node: Invoking autoreconf25998
Node: Setup28834
Node: Input29739
Node: Output31476
Node: Makefile Substitutions35113
Node: Preset Output Variables36716
Node: Build Directories41585
Node: Automatic Remaking43218
Node: Configuration Headers45304
Node: Header Templates47818
Node: Invoking autoheader49027
Node: Subdirectories52175
Node: Default Prefix53570
Node: Versions54974
Node: Existing Tests56878
Node: Alternative Programs58426
Node: Particular Programs59113
Node: Generic Programs67165
Node: Libraries70471
Node: Library Functions73545
Node: Particular Functions74103
Node: Generic Functions81297
Node: Header Files83401
Node: Particular Headers83960
Node: Generic Headers90952
Node: Structures92254
Node: Typedefs94491
Node: Particular Typedefs94997
Node: Generic Typedefs96214
Node: C Compiler Characteristics96671
Node: Fortran 77 Compiler Characteristics99542
Node: System Services101245
Node: UNIX Variants104381
Node: Writing Tests106400
Node: Examining Declarations108393
Node: Examining Syntax110885
Node: Examining Libraries112330
Node: Run Time116040
Node: Test Programs117028
Node: Guidelines119356
Node: Test Functions120545
Node: Portable Shell122088
Node: Testing Values and Files124020
Node: Multiple Cases125675
Node: Language Choice126873
Node: Results128975
Node: Defining Symbols129737
Node: Setting Output Variables133033
Node: Caching Results134879
Node: Cache Variable Names137625
Node: Cache Files139109
Node: Printing Messages141946
Node: Writing Macros145394
Node: Macro Definitions146041
Node: Macro Names147169
Node: Quoting149620
Node: Dependencies Between Macros151522
Node: Prerequisite Macros152169
Node: Suggested Ordering153660
Node: Obsolete Macros155190
Node: Manual Configuration156414
Node: Specifying Names157313
Node: Canonicalizing159214
Node: System Type Variables160726
Node: Using System Type161473
Node: Site Configuration162967
Node: External Software163740
Node: Package Options166943
Node: Site Details169690
Node: Transforming Names170913
Node: Transformation Options172091
Node: Transformation Examples172584
Node: Transformation Rules174152
Node: Site Defaults175561
Node: Invoking configure179467
Node: Basic Installation180416
Node: Compilers and Options182996
Node: Multiple Architectures183645
Node: Installation Names184631
Node: Optional Features185815
Node: System Type186585
Node: Sharing Defaults187607
Node: Operation Controls188231
Node: Invoking config.status189217
Node: Questions192605
Node: Distributing193137
Node: Why GNU m4194281
Node: Bootstrapping195094
Node: Why Not Imake195710
Node: Upgrading200119
Node: Changed File Names201640
Node: Changed Makefiles202394
Node: Changed Macros203490
Node: Invoking autoupdate204737
Node: Changed Results206328
Node: Changed Macro Writing208430
Node: History209693
Node: Genesis210485
Node: Exodus211674
Node: Leviticus214723
Node: Numbers216246
Node: Deuteronomy218162
Node: Old Macro Names220826
Node: Environment Variable Index223875
Node: Output Variable Index224889
Node: Preprocessor Symbol Index230087
Node: Macro Index235373

End Tag Table