1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013 - 2015 Xilinx, Inc.
*
* Xilinx Zynq SD Host Controller Interface
*/
#include <clk.h>
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include "mmc_private.h"
#include <linux/err.h>
#include <linux/libfdt.h>
#include <malloc.h>
#include <sdhci.h>
#include <zynqmp_tap_delay.h>
DECLARE_GLOBAL_DATA_PTR;
struct arasan_sdhci_plat {
struct mmc_config cfg;
struct mmc mmc;
unsigned int f_max;
};
struct arasan_sdhci_priv {
struct sdhci_host *host;
u8 deviceid;
u8 bank;
u8 no_1p8;
};
#if defined(CONFIG_ARCH_ZYNQMP)
#define MMC_HS200_BUS_SPEED 5
static const u8 mode2timing[] = {
[MMC_LEGACY] = UHS_SDR12_BUS_SPEED,
[SD_LEGACY] = UHS_SDR12_BUS_SPEED,
[MMC_HS] = HIGH_SPEED_BUS_SPEED,
[SD_HS] = HIGH_SPEED_BUS_SPEED,
[MMC_HS_52] = HIGH_SPEED_BUS_SPEED,
[MMC_DDR_52] = HIGH_SPEED_BUS_SPEED,
[UHS_SDR12] = UHS_SDR12_BUS_SPEED,
[UHS_SDR25] = UHS_SDR25_BUS_SPEED,
[UHS_SDR50] = UHS_SDR50_BUS_SPEED,
[UHS_DDR50] = UHS_DDR50_BUS_SPEED,
[UHS_SDR104] = UHS_SDR104_BUS_SPEED,
[MMC_HS_200] = MMC_HS200_BUS_SPEED,
};
#define SDHCI_TUNING_LOOP_COUNT 40
static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
{
u16 clk;
unsigned long timeout;
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
clk &= ~(SDHCI_CLOCK_CARD_EN);
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
/* Issue DLL Reset */
zynqmp_dll_reset(deviceid);
/* Wait max 20 ms */
timeout = 100;
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
dev_err(mmc_dev(host->mmc),
": Internal clock never stabilised.\n");
return;
}
timeout--;
udelay(1000);
}
clk |= SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
}
static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
{
struct mmc_cmd cmd;
struct mmc_data data;
u32 ctrl;
struct sdhci_host *host;
struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
u8 deviceid;
debug("%s\n", __func__);
host = priv->host;
deviceid = priv->deviceid;
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl |= SDHCI_CTRL_EXEC_TUNING;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
mdelay(1);
arasan_zynqmp_dll_reset(host, deviceid);
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
do {
cmd.cmdidx = opcode;
cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = 0;
data.blocksize = 64;
data.blocks = 1;
data.flags = MMC_DATA_READ;
if (tuning_loop_counter-- == 0)
break;
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
mmc->bus_width == 8)
data.blocksize = 128;
sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
data.blocksize),
SDHCI_BLOCK_SIZE);
sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
mmc_send_cmd(mmc, &cmd, NULL);
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
udelay(1);
} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
if (tuning_loop_counter < 0) {
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
}
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
printf("%s:Tuning failed\n", __func__);
return -1;
}
udelay(1);
arasan_zynqmp_dll_reset(host, deviceid);
/* Enable only interrupts served by the SD controller */
sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
SDHCI_INT_ENABLE);
/* Mask all sdhci interrupt sources */
sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
return 0;
}
static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
{
struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
struct mmc *mmc = (struct mmc *)host->mmc;
u8 uhsmode;
uhsmode = mode2timing[mmc->selected_mode];
if (uhsmode >= UHS_SDR25_BUS_SPEED)
arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
priv->bank);
}
static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
{
struct mmc *mmc = (struct mmc *)host->mmc;
u32 reg;
if (!IS_SD(mmc))
return;
if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
reg |= SDHCI_CTRL_VDD_180;
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
}
if (mmc->selected_mode > SD_HS &&
mmc->selected_mode <= UHS_DDR50)
sdhci_set_uhs_timing(host);
}
#endif
#if defined(CONFIG_ARCH_ZYNQMP)
const struct sdhci_ops arasan_ops = {
.platform_execute_tuning = &arasan_sdhci_execute_tuning,
.set_delay = &arasan_sdhci_set_tapdelay,
.set_control_reg = &arasan_sdhci_set_control_reg,
};
#endif
static int arasan_sdhci_probe(struct udevice *dev)
{
struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
struct sdhci_host *host;
struct clk clk;
unsigned long clock;
int ret;
host = priv->host;
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0) {
dev_err(dev, "failed to get clock\n");
return ret;
}
clock = clk_get_rate(&clk);
if (IS_ERR_VALUE(clock)) {
dev_err(dev, "failed to get rate\n");
return clock;
}
debug("%s: CLK %ld\n", __func__, clock);
ret = clk_enable(&clk);
if (ret && ret != -ENOSYS) {
dev_err(dev, "failed to enable clock\n");
return ret;
}
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
SDHCI_QUIRK_BROKEN_R1B;
#ifdef CONFIG_ZYNQ_HISPD_BROKEN
host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
#endif
if (priv->no_1p8)
host->quirks |= SDHCI_QUIRK_NO_1_8_V;
host->max_clk = clock;
host->mmc = &plat->mmc;
host->mmc->dev = dev;
host->mmc->priv = host;
ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
CONFIG_ZYNQ_SDHCI_MIN_FREQ);
if (ret)
return ret;
upriv->mmc = host->mmc;
return sdhci_probe(dev);
}
static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
{
struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
priv->host = calloc(1, sizeof(struct sdhci_host));
if (!priv->host)
return -1;
priv->host->name = dev->name;
#if defined(CONFIG_ARCH_ZYNQMP)
priv->host->ops = &arasan_ops;
#endif
priv->host->ioaddr = (void *)dev_read_addr(dev);
if (IS_ERR(priv->host->ioaddr))
return PTR_ERR(priv->host->ioaddr);
priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
plat->f_max = dev_read_u32_default(dev, "max-frequency",
CONFIG_ZYNQ_SDHCI_MAX_FREQ);
return 0;
}
static int arasan_sdhci_bind(struct udevice *dev)
{
struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct udevice_id arasan_sdhci_ids[] = {
{ .compatible = "arasan,sdhci-8.9a" },
{ }
};
U_BOOT_DRIVER(arasan_sdhci_drv) = {
.name = "arasan_sdhci",
.id = UCLASS_MMC,
.of_match = arasan_sdhci_ids,
.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
.ops = &sdhci_ops,
.bind = arasan_sdhci_bind,
.probe = arasan_sdhci_probe,
.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
};
|