1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2020 Toradex
*/
#include <common.h>
#include <init.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <miiphy.h>
#include <netdev.h>
#include <micrel.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
/* rom_pointer[1] contains the size of TEE occupies */
if (rom_pointer[1])
gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
else
gd->ram_size = PHYS_SDRAM_SIZE;
return 0;
}
#if IS_ENABLED(CONFIG_FEC_MXC)
static int setup_fec(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
/* Use 125M anatop REF_CLK1 for ENET1, not from external */
clrsetbits_le32(&gpr->gpr[1], 0x2000, 0);
return 0;
}
int board_phy_config(struct phy_device *phydev)
{
int tmp;
switch (ksz9xx1_phy_get_id(phydev) & MII_KSZ9x31_SILICON_REV_MASK) {
case PHY_ID_KSZ9031:
/*
* The PHY adds 1.2ns for the RXC and 0ns for TXC clock by
* default. The MAC and the layout don't add a skew between
* clock and data.
* Add 0.3ns for the RXC path and 0.96 + 0.42 ns (1.38 ns) for
* the TXC path to get the required clock skews.
*/
/* control data pad skew - devaddr = 0x02, register = 0x04 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x0070);
/* rx data pad skew - devaddr = 0x02, register = 0x05 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x7777);
/* tx data pad skew - devaddr = 0x02, register = 0x06 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x0000);
/* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x03f4);
break;
case PHY_ID_KSZ9131:
default:
/* read rxc dll control - devaddr = 0x2, register = 0x4c */
tmp = ksz9031_phy_extended_read(phydev, 0x02,
MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
MII_KSZ9031_MOD_DATA_NO_POST_INC);
/* disable rxdll bypass (enable 2ns skew delay on RXC) */
tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4c */
tmp = ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
/* read txc dll control - devaddr = 0x02, register = 0x4d */
tmp = ksz9031_phy_extended_read(phydev, 0x02,
MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
MII_KSZ9031_MOD_DATA_NO_POST_INC);
/* disable txdll bypass (enable 2ns skew delay on TXC) */
tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4d */
tmp = ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
break;
}
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#endif
int board_init(void)
{
if (IS_ENABLED(CONFIG_FEC_MXC))
setup_fec();
return 0;
}
int board_mmc_get_env_dev(int devno)
{
return devno;
}
int board_late_init(void)
{
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
return 0;
}
#endif
|
