1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <i2c.h>
#include <miiphy.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include "../common/tlv_data.h"
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
#include <../serdes/a38x/high_speed_env_spec.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Those values and defines are taken from the Marvell U-Boot version
* "u-boot-2013.01-15t1-clearfog"
*/
#define BOARD_GPP_OUT_ENA_LOW 0xffffffff
#define BOARD_GPP_OUT_ENA_MID 0xffffffff
#define BOARD_GPP_OUT_VAL_LOW 0x0
#define BOARD_GPP_OUT_VAL_MID 0x0
#define BOARD_GPP_POL_LOW 0x0
#define BOARD_GPP_POL_MID 0x0
static struct tlv_data cf_tlv_data;
static void cf_read_tlv_data(void)
{
static bool read_once;
if (read_once)
return;
read_once = true;
read_tlv_data(&cf_tlv_data);
}
/* The starting board_serdes_map reflects original Clearfog Pro usage */
static struct serdes_map board_serdes_map[] = {
{SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{SGMII1, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
};
void config_cfbase_serdes_map(void)
{
board_serdes_map[4].serdes_type = USB3_HOST0;
board_serdes_map[4].serdes_speed = SERDES_SPEED_5_GBPS;
board_serdes_map[4].serdes_mode = SERDES_DEFAULT_MODE;
}
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
{
cf_read_tlv_data();
/* Apply build configuration options before runtime configuration */
if (IS_ENABLED(CONFIG_CLEARFOG_SFP_25GB))
board_serdes_map[5].serdes_speed = SERDES_SPEED_3_125_GBPS;
if (IS_ENABLED(CONFIG_CLEARFOG_CON2_SATA)) {
board_serdes_map[4].serdes_type = SATA2;
board_serdes_map[4].serdes_speed = SERDES_SPEED_3_GBPS;
board_serdes_map[4].serdes_mode = SERDES_DEFAULT_MODE;
board_serdes_map[4].swap_rx = 1;
}
if (IS_ENABLED(CONFIG_CLEARFOG_CON3_SATA)) {
board_serdes_map[2].serdes_type = SATA1;
board_serdes_map[2].serdes_speed = SERDES_SPEED_3_GBPS;
board_serdes_map[2].serdes_mode = SERDES_DEFAULT_MODE;
board_serdes_map[2].swap_rx = 1;
}
/* Apply runtime detection changes */
if (sr_product_is(&cf_tlv_data, "Clearfog GTR")) {
board_serdes_map[0].serdes_type = PEX0;
board_serdes_map[0].serdes_speed = SERDES_SPEED_5_GBPS;
board_serdes_map[0].serdes_mode = PEX_ROOT_COMPLEX_X1;
} else if (sr_product_is(&cf_tlv_data, "Clearfog Pro")) {
/* handle recognized product as noop, no adjustment required */
} else if (sr_product_is(&cf_tlv_data, "Clearfog Base")) {
config_cfbase_serdes_map();
} else {
/*
* Fallback to static default. EEPROM TLV support is not
* enabled, runtime detection failed, hardware support is not
* present, EEPROM is corrupt, or an unrecognized product name
* is present.
*/
if (IS_ENABLED(CONFIG_SPL_CMD_TLV_EEPROM))
puts("EEPROM TLV detection failed: ");
puts("Using static config for ");
if (IS_ENABLED(CONFIG_TARGET_CLEARFOG_BASE)) {
puts("Clearfog Base.\n");
config_cfbase_serdes_map();
} else {
puts("Clearfog Pro.\n");
}
}
*serdes_map_array = board_serdes_map;
*count = ARRAY_SIZE(board_serdes_map);
return 0;
}
/*
* Define the DDR layout / topology here in the board file. This will
* be used by the DDR3 init code in the SPL U-Boot version to configure
* the DDR3 controller.
*/
static struct mv_ddr_topology_map board_topology_map = {
DEBUG_LEVEL_ERROR,
0x1, /* active interfaces */
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
{ { { {0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0} },
SPEED_BIN_DDR_1600K, /* speed_bin */
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
MV_DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
MV_DDR_TEMP_LOW, /* temperature */
MV_DDR_TIM_DEFAULT} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ {0} }, /* electrical configuration */
{0,}, /* electrical parameters */
0x3, /* clock enable mask */
};
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
{
struct if_params *ifp = &board_topology_map.interface_params[0];
cf_read_tlv_data();
switch (cf_tlv_data.ram_size) {
case 4:
default:
ifp->memory_size = MV_DDR_DIE_CAP_4GBIT;
break;
case 8:
ifp->memory_size = MV_DDR_DIE_CAP_8GBIT;
break;
}
/* Return the board topology as defined in the board code */
return &board_topology_map;
}
int board_early_init_f(void)
{
/* Configure MPP */
writel(0x11111111, MVEBU_MPP_BASE + 0x00);
writel(0x11111111, MVEBU_MPP_BASE + 0x04);
writel(0x10400011, MVEBU_MPP_BASE + 0x08);
writel(0x22043333, MVEBU_MPP_BASE + 0x0c);
writel(0x44400002, MVEBU_MPP_BASE + 0x10);
writel(0x41144004, MVEBU_MPP_BASE + 0x14);
writel(0x40333333, MVEBU_MPP_BASE + 0x18);
writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
/* Set GPP Out value */
writel(BOARD_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
writel(BOARD_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
/* Set GPP Polarity */
writel(BOARD_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
writel(BOARD_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
/* Set GPP Out Enable */
writel(BOARD_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
writel(BOARD_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
return 0;
}
int board_init(void)
{
/* Address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
/* Toggle GPIO41 to reset onboard switch and phy */
clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9));
/* GPIO 19 on ClearFog rev 2.1 controls the uSOM onboard phy reset */
clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19));
mdelay(1);
setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
mdelay(10);
return 0;
}
int checkboard(void)
{
char *board = "Clearfog Pro";
if (IS_ENABLED(CONFIG_TARGET_CLEARFOG_BASE))
board = "Clearfog Base";
cf_read_tlv_data();
if (strlen(cf_tlv_data.tlv_product_name[0]) > 0)
board = cf_tlv_data.tlv_product_name[0];
printf("Board: SolidRun %s", board);
if (strlen(cf_tlv_data.tlv_product_name[1]) > 0)
printf(", %s", cf_tlv_data.tlv_product_name[1]);
puts("\n");
return 0;
}
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in controller(s) come first */
return pci_eth_init(bis);
}
int board_late_init(void)
{
cf_read_tlv_data();
if (sr_product_is(&cf_tlv_data, "Clearfog Base"))
env_set("fdtfile", "armada-388-clearfog-base.dtb");
else if (sr_product_is(&cf_tlv_data, "Clearfog GTR S4"))
env_set("fdtfile", "armada-385-clearfog-gtr-s4.dtb");
else if (sr_product_is(&cf_tlv_data, "Clearfog GTR L8"))
env_set("fdtfile", "armada-385-clearfog-gtr-l8.dtb");
else if (IS_ENABLED(CONFIG_TARGET_CLEARFOG_BASE))
env_set("fdtfile", "armada-388-clearfog-base.dtb");
else
env_set("fdtfile", "armada-388-clearfog-pro.dtb");
return 0;
}
|
