1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Kontron Electronics GmbH
*/
#include <asm/arch/imx8mm_pins.h>
#include <asm/arch/clock.h>
#include <asm/arch/ddr.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/sections.h>
#include <dm/uclass.h>
#include <dm/device.h>
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>
#include <hang.h>
#include <i2c.h>
#include <init.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <power/pca9450.h>
#include <power/pmic.h>
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
enum {
BOARD_TYPE_KTN_N801X,
BOARD_TYPE_KTN_N802X,
BOARD_TYPE_MAX
};
#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
static iomux_v3_cfg_t const i2c1_pads[] = {
IMX8MM_PAD_I2C1_SCL_I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL) | MUX_MODE_SION,
IMX8MM_PAD_I2C1_SDA_I2C1_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL) | MUX_MODE_SION
};
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
switch (boot_dev_spl) {
case USB_BOOT:
return BOOT_DEVICE_BOARD;
case SPI_NOR_BOOT:
return BOOT_DEVICE_SPI;
case SD1_BOOT:
case MMC1_BOOT:
return BOOT_DEVICE_MMC1;
case SD2_BOOT:
case MMC2_BOOT:
return BOOT_DEVICE_MMC2;
default:
return BOOT_DEVICE_NONE;
}
}
bool check_ram_available(long size)
{
long sz = get_ram_size((long *)PHYS_SDRAM, size);
if (sz == size)
return true;
return false;
}
static void spl_dram_init(void)
{
u32 size = 0;
/*
* Try the default DDR settings in lpddr4_timing.c to
* comply with the Micron 4GB DDR.
*/
if (!ddr_init(&dram_timing) && check_ram_available(SZ_4G)) {
size = 4;
} else {
/*
* Overwrite some values to comply with the Micron 1GB/2GB DDRs.
*/
dram_timing.ddrc_cfg[2].val = 0xa1080020;
dram_timing.ddrc_cfg[37].val = 0x1f;
dram_timing.fsp_msg[0].fsp_cfg[8].val = 0x110;
dram_timing.fsp_msg[0].fsp_cfg[20].val = 0x1;
dram_timing.fsp_msg[1].fsp_cfg[9].val = 0x110;
dram_timing.fsp_msg[1].fsp_cfg[21].val = 0x1;
dram_timing.fsp_msg[2].fsp_cfg[10].val = 0x110;
dram_timing.fsp_msg[2].fsp_cfg[22].val = 0x1;
if (!ddr_init(&dram_timing)) {
if (check_ram_available(SZ_2G))
size = 2;
else if (check_ram_available(SZ_1G))
size = 1;
}
}
if (size == 0) {
printf("Failed to initialize DDR RAM!\n");
size = 1;
}
gd->ram_size = size;
writel(size, MCU_BOOTROM_BASE_ADDR);
}
int do_board_detect(void)
{
struct udevice *udev;
/*
* Check for the RTC on the OSM module.
*/
imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
if (i2c_get_chip_for_busnum(0, 0x52, 0, &udev) == 0) {
gd->board_type = BOARD_TYPE_KTN_N802X;
printf("Kontron OSM-S i.MX8MM (N802X) module, %u GB RAM detected\n",
(unsigned int)gd->ram_size);
} else {
gd->board_type = BOARD_TYPE_KTN_N801X;
printf("Kontron SL i.MX8MM (N801X) module, %u GB RAM detected\n",
(unsigned int)gd->ram_size);
}
/*
* Check the I2C PMIC to detect the deprecated SoM with DA9063.
*/
imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
if (i2c_get_chip_for_busnum(0, 0x58, 0, &udev) == 0) {
printf("### ATTENTION: DEPRECATED SOM REVISION (N8010 Rev0) DETECTED! ###\n");
printf("### THIS HW IS NOT SUPPORTED AND BOOTING WILL PROBABLY FAIL ###\n");
printf("### PLEASE UPGRADE TO LATEST MODULE ###\n");
}
return 0;
}
int board_fit_config_name_match(const char *name)
{
if (gd->board_type == BOARD_TYPE_KTN_N801X && is_imx8mm() &&
(!strcmp(name, "imx8mm-kontron-n801x-s") ||
!strcmp(name, "imx8mm-kontron-bl")))
return 0;
if (gd->board_type == BOARD_TYPE_KTN_N802X && is_imx8mm() &&
(!strcmp(name, "imx8mm-kontron-n802x-s") ||
!strcmp(name, "imx8mm-kontron-bl-osm-s")))
return 0;
return -1;
}
void spl_board_init(void)
{
struct udevice *dev;
int ret;
arch_misc_init();
puts("Normal Boot\n");
ret = uclass_get_device_by_name(UCLASS_CLK,
"clock-controller@30380000",
&dev);
if (ret < 0)
printf("Failed to find clock node. Check device tree\n");
}
static int power_init_board(void)
{
struct udevice *dev;
int ret = pmic_get("pmic@25", &dev);
if (ret == -ENODEV)
puts("No pmic found\n");
if (ret)
return ret;
/* BUCKxOUT_DVS0/1 control BUCK123 output, clear PRESET_EN */
pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
/* increase VDD_DRAM to 0.95V for 1.5GHz DDR */
pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x1c);
/* set VDD_SNVS_0V8 from default 0.85V to 0.8V */
pmic_reg_write(dev, PCA9450_LDO2CTRL, 0xC0);
return 0;
}
void board_init_f(ulong dummy)
{
int ret;
arch_cpu_init();
init_uart_clk(2);
timer_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
ret = spl_init();
if (ret) {
debug("spl_init() failed: %d\n", ret);
hang();
}
preloader_console_init();
enable_tzc380();
/* PMIC initialization */
power_init_board();
/* DDR initialization */
spl_dram_init();
/* Detect the board type */
do_board_detect();
board_init_r(NULL, 0);
}
|
