/* * (C) Copyright 2008 * Texas Instruments, * Sukumar Ghorai * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation's version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #if defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX) #include #endif #include #include #include #include #ifdef CONFIG_OMAP54XX #include #include #endif #if !defined(CONFIG_ARCH_KEYSTONE) #include #include #endif #ifdef CONFIG_MMC_OMAP36XX_PINS #include #endif #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /* simplify defines to OMAP_HSMMC_USE_GPIO */ #if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) #define OMAP_HSMMC_USE_GPIO #else #undef OMAP_HSMMC_USE_GPIO #endif /* common definitions for all OMAPs */ #define SYSCTL_SRC (1 << 25) #define SYSCTL_SRD (1 << 26) #ifdef CONFIG_IODELAY_RECALIBRATION struct omap_hsmmc_pinctrl_state { struct pad_conf_entry *padconf; int npads; struct iodelay_cfg_entry *iodelay; int niodelays; }; #endif struct omap_hsmmc_data { struct hsmmc *base_addr; #if !CONFIG_IS_ENABLED(DM_MMC) struct mmc_config cfg; #endif uint bus_width; uint clock; ushort last_cmd; #ifdef OMAP_HSMMC_USE_GPIO #if CONFIG_IS_ENABLED(DM_MMC) struct gpio_desc cd_gpio; /* Change Detect GPIO */ struct gpio_desc wp_gpio; /* Write Protect GPIO */ #else int cd_gpio; int wp_gpio; #endif #endif #if CONFIG_IS_ENABLED(DM_MMC) enum bus_mode mode; #endif u8 controller_flags; #ifdef CONFIG_MMC_OMAP_HS_ADMA struct omap_hsmmc_adma_desc *adma_desc_table; uint desc_slot; #endif const char *hw_rev; struct udevice *pbias_supply; uint signal_voltage; #ifdef CONFIG_IODELAY_RECALIBRATION struct omap_hsmmc_pinctrl_state *default_pinctrl_state; struct omap_hsmmc_pinctrl_state *hs_pinctrl_state; struct omap_hsmmc_pinctrl_state *hs200_1_8v_pinctrl_state; struct omap_hsmmc_pinctrl_state *ddr_1_8v_pinctrl_state; struct omap_hsmmc_pinctrl_state *sdr12_pinctrl_state; struct omap_hsmmc_pinctrl_state *sdr25_pinctrl_state; struct omap_hsmmc_pinctrl_state *ddr50_pinctrl_state; struct omap_hsmmc_pinctrl_state *sdr50_pinctrl_state; struct omap_hsmmc_pinctrl_state *sdr104_pinctrl_state; #endif }; struct omap_mmc_of_data { u8 controller_flags; }; #ifdef CONFIG_MMC_OMAP_HS_ADMA struct omap_hsmmc_adma_desc { u8 attr; u8 reserved; u16 len; u32 addr; }; #define ADMA_MAX_LEN 63488 /* Decriptor table defines */ #define ADMA_DESC_ATTR_VALID BIT(0) #define ADMA_DESC_ATTR_END BIT(1) #define ADMA_DESC_ATTR_INT BIT(2) #define ADMA_DESC_ATTR_ACT1 BIT(4) #define ADMA_DESC_ATTR_ACT2 BIT(5) #define ADMA_DESC_TRANSFER_DATA ADMA_DESC_ATTR_ACT2 #define ADMA_DESC_LINK_DESC (ADMA_DESC_ATTR_ACT1 | ADMA_DESC_ATTR_ACT2) #endif /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 #define MMC_TIMEOUT_MS 20 /* DMA transfers can take a long time if a lot a data is transferred. * The timeout must take in account the amount of data. Let's assume * that the time will never exceed 333 ms per MB (in other word we assume * that the bandwidth is always above 3MB/s). */ #define DMA_TIMEOUT_PER_MB 333 #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) #define OMAP_HSMMC_NO_1_8_V BIT(1) #define OMAP_HSMMC_USE_ADMA BIT(2) #define OMAP_HSMMC_REQUIRE_IODELAY BIT(3) static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int siz); static void omap_hsmmc_start_clock(struct hsmmc *mmc_base); static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base); static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit); static inline struct omap_hsmmc_data *omap_hsmmc_get_data(struct mmc *mmc) { #if CONFIG_IS_ENABLED(DM_MMC) return dev_get_priv(mmc->dev); #else return (struct omap_hsmmc_data *)mmc->priv; #endif } #if defined(CONFIG_OMAP34XX) || defined(CONFIG_IODELAY_RECALIBRATION) static inline struct mmc_config *omap_hsmmc_get_cfg(struct mmc *mmc) { #if CONFIG_IS_ENABLED(DM_MMC) struct omap_hsmmc_plat *plat = dev_get_plat(mmc->dev); return &plat->cfg; #else return &((struct omap_hsmmc_data *)mmc->priv)->cfg; #endif } #endif #if defined(OMAP_HSMMC_USE_GPIO) && !CONFIG_IS_ENABLED(DM_MMC) static int omap_mmc_setup_gpio_in(int gpio, const char *label) { int ret; #if !CONFIG_IS_ENABLED(DM_GPIO) if (!gpio_is_valid(gpio)) return -1; #endif ret = gpio_request(gpio, label); if (ret) return ret; ret = gpio_direction_input(gpio); if (ret) return ret; return gpio; } #endif static unsigned char mmc_board_init(struct mmc *mmc) { #if defined(CONFIG_OMAP34XX) struct mmc_config *cfg = omap_hsmmc_get_cfg(mmc); t2_t *t2_base = (t2_t *)T2_BASE; struct prcm *prcm_base = (struct prcm *)PRCM_BASE; u32 pbias_lite; #ifdef CONFIG_MMC_OMAP36XX_PINS u32 wkup_ctrl = readl(OMAP34XX_CTRL_WKUP_CTRL); #endif pbias_lite = readl(&t2_base->pbias_lite); pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0); #ifdef CONFIG_TARGET_OMAP3_CAIRO /* for cairo board, we need to set up 1.8 Volt bias level on MMC1 */ pbias_lite &= ~PBIASLITEVMODE0; #endif #ifdef CONFIG_TARGET_OMAP3_LOGIC /* For Logic PD board, 1.8V bias to go enable gpio127 for mmc_cd */ pbias_lite &= ~PBIASLITEVMODE1; #endif #ifdef CONFIG_MMC_OMAP36XX_PINS if (get_cpu_family() == CPU_OMAP36XX) { /* Disable extended drain IO before changing PBIAS */ wkup_ctrl &= ~OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ; writel(wkup_ctrl, OMAP34XX_CTRL_WKUP_CTRL); } #endif writel(pbias_lite, &t2_base->pbias_lite); writel(pbias_lite | PBIASLITEPWRDNZ1 | PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, &t2_base->pbias_lite); #ifdef CONFIG_MMC_OMAP36XX_PINS if (get_cpu_family() == CPU_OMAP36XX) /* Enable extended drain IO after changing PBIAS */ writel(wkup_ctrl | OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ, OMAP34XX_CTRL_WKUP_CTRL); #endif writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL, &t2_base->devconf0); writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL, &t2_base->devconf1); /* Change from default of 52MHz to 26MHz if necessary */ if (!(cfg->host_caps & MMC_MODE_HS_52MHz)) writel(readl(&t2_base->ctl_prog_io1) & ~CTLPROGIO1SPEEDCTRL, &t2_base->ctl_prog_io1); writel(readl(&prcm_base->fclken1_core) | EN_MMC1 | EN_MMC2 | EN_MMC3, &prcm_base->fclken1_core); writel(readl(&prcm_base->iclken1_core) | EN_MMC1 | EN_MMC2 | EN_MMC3, &prcm_base->iclken1_core); #endif #if (defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)) &&\ !CONFIG_IS_ENABLED(DM_REGULATOR) /* PBIAS config needed for MMC1 only */ if (mmc_get_blk_desc(mmc)->devnum == 0) vmmc_pbias_config(LDO_VOLT_3V3); #endif return 0; } void mmc_init_stream(struct hsmmc *mmc_base) { ulong start; writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con); writel(MMC_CMD0, &mmc_base->cmd); start = get_timer(0); while (!(readl(&mmc_base->stat) & CC_MASK)) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for cc!\n", __func__); return; } } writel(CC_MASK, &mmc_base->stat) ; writel(MMC_CMD0, &mmc_base->cmd) ; start = get_timer(0); while (!(readl(&mmc_base->stat) & CC_MASK)) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for cc2!\n", __func__); return; } } writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con); } #if CONFIG_IS_ENABLED(DM_MMC) #ifdef CONFIG_IODELAY_RECALIBRATION static void omap_hsmmc_io_recalibrate(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct omap_hsmmc_pinctrl_state *pinctrl_state; switch (priv->mode) { case MMC_HS_200: pinctrl_state = priv->hs200_1_8v_pinctrl_state; break; case UHS_SDR104: pinctrl_state = priv->sdr104_pinctrl_state; break; case UHS_SDR50: pinctrl_state = priv->sdr50_pinctrl_state; break; case UHS_DDR50: pinctrl_state = priv->ddr50_pinctrl_state; break; case UHS_SDR25: pinctrl_state = priv->sdr25_pinctrl_state; break; case UHS_SDR12: pinctrl_state = priv->sdr12_pinctrl_state; break; case SD_HS: case MMC_HS: case MMC_HS_52: pinctrl_state = priv->hs_pinctrl_state; break; case MMC_DDR_52: pinctrl_state = priv->ddr_1_8v_pinctrl_state; default: pinctrl_state = priv->default_pinctrl_state; break; } if (!pinctrl_state) pinctrl_state = priv->default_pinctrl_state; if (priv->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY) { if (pinctrl_state->iodelay) late_recalibrate_iodelay(pinctrl_state->padconf, pinctrl_state->npads, pinctrl_state->iodelay, pinctrl_state->niodelays); else do_set_mux32((*ctrl)->control_padconf_core_base, pinctrl_state->padconf, pinctrl_state->npads); } } #endif static void omap_hsmmc_set_timing(struct mmc *mmc) { u32 val; struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); mmc_base = priv->base_addr; omap_hsmmc_stop_clock(mmc_base); val = readl(&mmc_base->ac12); val &= ~AC12_UHSMC_MASK; priv->mode = mmc->selected_mode; if (mmc_is_mode_ddr(priv->mode)) writel(readl(&mmc_base->con) | DDR, &mmc_base->con); else writel(readl(&mmc_base->con) & ~DDR, &mmc_base->con); switch (priv->mode) { case MMC_HS_200: case UHS_SDR104: val |= AC12_UHSMC_SDR104; break; case UHS_SDR50: val |= AC12_UHSMC_SDR50; break; case MMC_DDR_52: case UHS_DDR50: val |= AC12_UHSMC_DDR50; break; case SD_HS: case MMC_HS_52: case UHS_SDR25: val |= AC12_UHSMC_SDR25; break; case MMC_LEGACY: case MMC_HS: case UHS_SDR12: val |= AC12_UHSMC_SDR12; break; default: val |= AC12_UHSMC_RES; break; } writel(val, &mmc_base->ac12); #ifdef CONFIG_IODELAY_RECALIBRATION omap_hsmmc_io_recalibrate(mmc); #endif omap_hsmmc_start_clock(mmc_base); } static void omap_hsmmc_conf_bus_power(struct mmc *mmc, uint signal_voltage) { struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); u32 hctl, ac12; mmc_base = priv->base_addr; hctl = readl(&mmc_base->hctl) & ~SDVS_MASK; ac12 = readl(&mmc_base->ac12) & ~AC12_V1V8_SIGEN; switch (signal_voltage) { case MMC_SIGNAL_VOLTAGE_330: hctl |= SDVS_3V3; break; case MMC_SIGNAL_VOLTAGE_180: hctl |= SDVS_1V8; ac12 |= AC12_V1V8_SIGEN; break; } writel(hctl, &mmc_base->hctl); writel(ac12, &mmc_base->ac12); } static int omap_hsmmc_wait_dat0(struct udevice *dev, int state, int timeout_us) { int ret = -ETIMEDOUT; u32 con; bool dat0_high; bool target_dat0_high = !!state; struct omap_hsmmc_data *priv = dev_get_priv(dev); struct hsmmc *mmc_base = priv->base_addr; con = readl(&mmc_base->con); writel(con | CON_CLKEXTFREE | CON_PADEN, &mmc_base->con); timeout_us = DIV_ROUND_UP(timeout_us, 10); /* check every 10 us. */ while (timeout_us--) { dat0_high = !!(readl(&mmc_base->pstate) & PSTATE_DLEV_DAT0); if (dat0_high == target_dat0_high) { ret = 0; break; } udelay(10); } writel(con, &mmc_base->con); return ret; } #if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE) #if CONFIG_IS_ENABLED(DM_REGULATOR) static int omap_hsmmc_set_io_regulator(struct mmc *mmc, int mV) { int ret = 0; int uV = mV * 1000; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); if (!mmc->vqmmc_supply) return 0; /* Disable PBIAS */ ret = regulator_set_enable_if_allowed(priv->pbias_supply, false); if (ret) return ret; /* Turn off IO voltage */ ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, false); if (ret) return ret; /* Program a new IO voltage value */ ret = regulator_set_value(mmc->vqmmc_supply, uV); if (ret) return ret; /* Turn on IO voltage */ ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, true); if (ret) return ret; /* Program PBIAS voltage*/ ret = regulator_set_value(priv->pbias_supply, uV); if (ret && ret != -ENOSYS) return ret; /* Enable PBIAS */ ret = regulator_set_enable_if_allowed(priv->pbias_supply, true); if (ret) return ret; return 0; } #endif static int omap_hsmmc_set_signal_voltage(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct hsmmc *mmc_base = priv->base_addr; int mv = mmc_voltage_to_mv(mmc->signal_voltage); u32 capa_mask; __maybe_unused u8 palmas_ldo_volt; u32 val; if (mv < 0) return -EINVAL; if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { mv = 3300; capa_mask = VS33_3V3SUP; palmas_ldo_volt = LDO_VOLT_3V3; } else if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { capa_mask = VS18_1V8SUP; palmas_ldo_volt = LDO_VOLT_1V8; } else { return -EOPNOTSUPP; } val = readl(&mmc_base->capa); if (!(val & capa_mask)) return -EOPNOTSUPP; priv->signal_voltage = mmc->signal_voltage; omap_hsmmc_conf_bus_power(mmc, mmc->signal_voltage); #if CONFIG_IS_ENABLED(DM_REGULATOR) return omap_hsmmc_set_io_regulator(mmc, mv); #elif (defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)) && \ defined(CONFIG_PALMAS_POWER) if (mmc_get_blk_desc(mmc)->devnum == 0) vmmc_pbias_config(palmas_ldo_volt); return 0; #else return 0; #endif } #endif static uint32_t omap_hsmmc_set_capabilities(struct mmc *mmc) { struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); u32 val; mmc_base = priv->base_addr; val = readl(&mmc_base->capa); if (priv->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { val |= (VS33_3V3SUP | VS18_1V8SUP); } else if (priv->controller_flags & OMAP_HSMMC_NO_1_8_V) { val |= VS33_3V3SUP; val &= ~VS18_1V8SUP; } else { val |= VS18_1V8SUP; val &= ~VS33_3V3SUP; } writel(val, &mmc_base->capa); return val; } #if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static void omap_hsmmc_disable_tuning(struct mmc *mmc) { struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); u32 val; mmc_base = priv->base_addr; val = readl(&mmc_base->ac12); val &= ~(AC12_SCLK_SEL); writel(val, &mmc_base->ac12); val = readl(&mmc_base->dll); val &= ~(DLL_FORCE_VALUE | DLL_SWT); writel(val, &mmc_base->dll); } static void omap_hsmmc_set_dll(struct mmc *mmc, int count) { int i; struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); u32 val; mmc_base = priv->base_addr; val = readl(&mmc_base->dll); val |= DLL_FORCE_VALUE; val &= ~(DLL_FORCE_SR_C_MASK << DLL_FORCE_SR_C_SHIFT); val |= (count << DLL_FORCE_SR_C_SHIFT); writel(val, &mmc_base->dll); val |= DLL_CALIB; writel(val, &mmc_base->dll); for (i = 0; i < 1000; i++) { if (readl(&mmc_base->dll) & DLL_CALIB) break; } val &= ~DLL_CALIB; writel(val, &mmc_base->dll); } static int omap_hsmmc_execute_tuning(struct udevice *dev, uint opcode) { struct omap_hsmmc_data *priv = dev_get_priv(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct mmc *mmc = upriv->mmc; struct hsmmc *mmc_base; u32 val; u8 cur_match, prev_match = 0; int ret; u32 phase_delay = 0; u32 start_window = 0, max_window = 0; u32 length = 0, max_len = 0; bool single_point_failure = false; struct udevice *thermal_dev; int temperature; int i; mmc_base = priv->base_addr; val = readl(&mmc_base->capa2); /* clock tuning is not needed for upto 52MHz */ if (!((mmc->selected_mode == MMC_HS_200) || (mmc->selected_mode == UHS_SDR104) || ((mmc->selected_mode == UHS_SDR50) && (val & CAPA2_TSDR50)))) return 0; ret = uclass_first_device_err(UCLASS_THERMAL, &thermal_dev); if (ret) { printf("Couldn't get thermal device for tuning\n"); return ret; } ret = thermal_get_temp(thermal_dev, &temperature); if (ret) { printf("Couldn't get temperature for tuning\n"); return ret; } val = readl(&mmc_base->dll); val |= DLL_SWT; writel(val, &mmc_base->dll); /* * Stage 1: Search for a maximum pass window ignoring any * any single point failures. If the tuning value ends up * near it, move away from it in stage 2 below */ while (phase_delay <= MAX_PHASE_DELAY) { omap_hsmmc_set_dll(mmc, phase_delay); cur_match = !mmc_send_tuning(mmc, opcode); if (cur_match) { if (prev_match) { length++; } else if (single_point_failure) { /* ignore single point failure */ length++; single_point_failure = false; } else { start_window = phase_delay; length = 1; } } else { single_point_failure = prev_match; } if (length > max_len) { max_window = start_window; max_len = length; } prev_match = cur_match; phase_delay += 4; } if (!max_len) { ret = -EIO; goto tuning_error; } val = readl(&mmc_base->ac12); if (!(val & AC12_SCLK_SEL)) { ret = -EIO; goto tuning_error; } /* * Assign tuning value as a ratio of maximum pass window based * on temperature */ if (temperature < -20000) phase_delay = min(max_window + 4 * max_len - 24, max_window + DIV_ROUND_UP(13 * max_len, 16) * 4); else if (temperature < 20000) phase_delay = max_window + DIV_ROUND_UP(9 * max_len, 16) * 4; else if (temperature < 40000) phase_delay = max_window + DIV_ROUND_UP(8 * max_len, 16) * 4; else if (temperature < 70000) phase_delay = max_window + DIV_ROUND_UP(7 * max_len, 16) * 4; else if (temperature < 90000) phase_delay = max_window + DIV_ROUND_UP(5 * max_len, 16) * 4; else if (temperature < 120000) phase_delay = max_window + DIV_ROUND_UP(4 * max_len, 16) * 4; else phase_delay = max_window + DIV_ROUND_UP(3 * max_len, 16) * 4; /* * Stage 2: Search for a single point failure near the chosen tuning * value in two steps. First in the +3 to +10 range and then in the * +2 to -10 range. If found, move away from it in the appropriate * direction by the appropriate amount depending on the temperature. */ for (i = 3; i <= 10; i++) { omap_hsmmc_set_dll(mmc, phase_delay + i); if (mmc_send_tuning(mmc, opcode)) { if (temperature < 10000) phase_delay += i + 6; else if (temperature < 20000) phase_delay += i - 12; else if (temperature < 70000) phase_delay += i - 8; else if (temperature < 90000) phase_delay += i - 6; else phase_delay += i - 6; goto single_failure_found; } } for (i = 2; i >= -10; i--) { omap_hsmmc_set_dll(mmc, phase_delay + i); if (mmc_send_tuning(mmc, opcode)) { if (temperature < 10000) phase_delay += i + 12; else if (temperature < 20000) phase_delay += i + 8; else if (temperature < 70000) phase_delay += i + 8; else if (temperature < 90000) phase_delay += i + 10; else phase_delay += i + 12; goto single_failure_found; } } single_failure_found: omap_hsmmc_set_dll(mmc, phase_delay); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC); return 0; tuning_error: omap_hsmmc_disable_tuning(mmc); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC); return ret; } #endif #endif static void mmc_enable_irq(struct mmc *mmc, struct mmc_cmd *cmd) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct hsmmc *mmc_base = priv->base_addr; u32 irq_mask = INT_EN_MASK; /* * TODO: Errata i802 indicates only DCRC interrupts can occur during * tuning procedure and DCRC should be disabled. But see occurences * of DEB, CIE, CEB, CCRC interupts during tuning procedure. These * interrupts occur along with BRR, so the data is actually in the * buffer. It has to be debugged why these interrutps occur */ if (cmd && mmc_is_tuning_cmd(cmd->cmdidx)) irq_mask &= ~(IE_DEB | IE_DCRC | IE_CIE | IE_CEB | IE_CCRC); writel(irq_mask, &mmc_base->ie); } static int omap_hsmmc_init_setup(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct hsmmc *mmc_base; unsigned int reg_val; unsigned int dsor; ulong start; mmc_base = priv->base_addr; mmc_board_init(mmc); writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, &mmc_base->sysconfig); start = get_timer(0); while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for cc2!\n", __func__); return -ETIMEDOUT; } } writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl); start = get_timer(0); while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for softresetall!\n", __func__); return -ETIMEDOUT; } } #ifdef CONFIG_MMC_OMAP_HS_ADMA reg_val = readl(&mmc_base->hl_hwinfo); if (reg_val & MADMA_EN) priv->controller_flags |= OMAP_HSMMC_USE_ADMA; #endif #if CONFIG_IS_ENABLED(DM_MMC) reg_val = omap_hsmmc_set_capabilities(mmc); omap_hsmmc_conf_bus_power(mmc, (reg_val & VS33_3V3SUP) ? MMC_SIGNAL_VOLTAGE_330 : MMC_SIGNAL_VOLTAGE_180); #else writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V3, &mmc_base->hctl); writel(readl(&mmc_base->capa) | VS33_3V3SUP | VS18_1V8SUP, &mmc_base->capa); #endif reg_val = readl(&mmc_base->con) & RESERVED_MASK; writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH | MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK | HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con); dsor = 240; mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK), (ICE_STOP | DTO_15THDTO)); mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, (dsor << CLKD_OFFSET) | ICE_OSCILLATE); start = get_timer(0); while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for ics!\n", __func__); return -ETIMEDOUT; } } writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl); mmc_enable_irq(mmc, NULL); #if !CONFIG_IS_ENABLED(DM_MMC) mmc_init_stream(mmc_base); #endif return 0; } /* * MMC controller internal finite state machine reset * * Used to reset command or data internal state machines, using respectively * SRC or SRD bit of SYSCTL register */ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) { ulong start; mmc_reg_out(&mmc_base->sysctl, bit, bit); /* * CMD(DAT) lines reset procedures are slightly different * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx). * According to OMAP3 TRM: * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it * returns to 0x0. * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset * procedure steps must be as follows: * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in * MMCHS_SYSCTL register (SD_SYSCTL for AM335x). * 2. Poll the SRC(SRD) bit until it is set to 0x1. * 3. Wait until the SRC (SRD) bit returns to 0x0 * (reset procedure is completed). */ #if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX) if (!(readl(&mmc_base->sysctl) & bit)) { start = get_timer(0); while (!(readl(&mmc_base->sysctl) & bit)) { if (get_timer(0) - start > MMC_TIMEOUT_MS) return; } } #endif start = get_timer(0); while ((readl(&mmc_base->sysctl) & bit) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for sysctl %x to clear\n", __func__, bit); return; } } } #ifdef CONFIG_MMC_OMAP_HS_ADMA static void omap_hsmmc_adma_desc(struct mmc *mmc, char *buf, u16 len, bool end) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct omap_hsmmc_adma_desc *desc; u8 attr; desc = &priv->adma_desc_table[priv->desc_slot]; attr = ADMA_DESC_ATTR_VALID | ADMA_DESC_TRANSFER_DATA; if (!end) priv->desc_slot++; else attr |= ADMA_DESC_ATTR_END; desc->len = len; desc->addr = (u32)buf; desc->reserved = 0; desc->attr = attr; } static void omap_hsmmc_prepare_adma_table(struct mmc *mmc, struct mmc_data *data) { uint total_len = data->blocksize * data->blocks; uint desc_count = DIV_ROUND_UP(total_len, ADMA_MAX_LEN); struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); int i = desc_count; char *buf; priv->desc_slot = 0; priv->adma_desc_table = (struct omap_hsmmc_adma_desc *) memalign(ARCH_DMA_MINALIGN, desc_count * sizeof(struct omap_hsmmc_adma_desc)); if (data->flags & MMC_DATA_READ) buf = data->dest; else buf = (char *)data->src; while (--i) { omap_hsmmc_adma_desc(mmc, buf, ADMA_MAX_LEN, false); buf += ADMA_MAX_LEN; total_len -= ADMA_MAX_LEN; } omap_hsmmc_adma_desc(mmc, buf, total_len, true); flush_dcache_range((long)priv->adma_desc_table, (long)priv->adma_desc_table + ROUND(desc_count * sizeof(struct omap_hsmmc_adma_desc), ARCH_DMA_MINALIGN)); } static void omap_hsmmc_prepare_data(struct mmc *mmc, struct mmc_data *data) { struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); u32 val; char *buf; mmc_base = priv->base_addr; omap_hsmmc_prepare_adma_table(mmc, data); if (data->flags & MMC_DATA_READ) buf = data->dest; else buf = (char *)data->src; val = readl(&mmc_base->hctl); val |= DMA_SELECT; writel(val, &mmc_base->hctl); val = readl(&mmc_base->con); val |= DMA_MASTER; writel(val, &mmc_base->con); writel((u32)priv->adma_desc_table, &mmc_base->admasal); flush_dcache_range((u32)buf, (u32)buf + ROUND(data->blocksize * data->blocks, ARCH_DMA_MINALIGN)); } static void omap_hsmmc_dma_cleanup(struct mmc *mmc) { struct hsmmc *mmc_base; struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); u32 val; mmc_base = priv->base_addr; val = readl(&mmc_base->con); val &= ~DMA_MASTER; writel(val, &mmc_base->con); val = readl(&mmc_base->hctl); val &= ~DMA_SELECT; writel(val, &mmc_base->hctl); kfree(priv->adma_desc_table); } #else #define omap_hsmmc_adma_desc #define omap_hsmmc_prepare_adma_table #define omap_hsmmc_prepare_data #define omap_hsmmc_dma_cleanup #endif #if !CONFIG_IS_ENABLED(DM_MMC) static int omap_hsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); #else static int omap_hsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data) { struct omap_hsmmc_data *priv = dev_get_priv(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct mmc *mmc = upriv->mmc; #endif struct hsmmc *mmc_base; unsigned int flags, mmc_stat; ulong start; priv->last_cmd = cmd->cmdidx; mmc_base = priv->base_addr; if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) return 0; start = get_timer(0); while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting on cmd inhibit to clear\n", __func__); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC); return -ETIMEDOUT; } } writel(0xFFFFFFFF, &mmc_base->stat); if (readl(&mmc_base->stat)) { mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC); } /* * CMDREG * CMDIDX[13:8] : Command index * DATAPRNT[5] : Data Present Select * ENCMDIDX[4] : Command Index Check Enable * ENCMDCRC[3] : Command CRC Check Enable * RSPTYP[1:0] * 00 = No Response * 01 = Length 136 * 10 = Length 48 * 11 = Length 48 Check busy after response */ /* Delay added before checking the status of frq change * retry not supported by mmc.c(core file) */ if (cmd->cmdidx == SD_CMD_APP_SEND_SCR) udelay(50000); /* wait 50 ms */ if (!(cmd->resp_type & MMC_RSP_PRESENT)) flags = 0; else if (cmd->resp_type & MMC_RSP_136) flags = RSP_TYPE_LGHT136 | CICE_NOCHECK; else if (cmd->resp_type & MMC_RSP_BUSY) flags = RSP_TYPE_LGHT48B; else flags = RSP_TYPE_LGHT48; /* enable default flags */ flags = flags | (CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK | MSBS_SGLEBLK); flags &= ~(ACEN_ENABLE | BCE_ENABLE | DE_ENABLE); if (cmd->resp_type & MMC_RSP_CRC) flags |= CCCE_CHECK; if (cmd->resp_type & MMC_RSP_OPCODE) flags |= CICE_CHECK; if (data) { if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) { flags |= (MSBS_MULTIBLK | BCE_ENABLE | ACEN_ENABLE); data->blocksize = 512; writel(data->blocksize | (data->blocks << 16), &mmc_base->blk); } else writel(data->blocksize | NBLK_STPCNT, &mmc_base->blk); if (data->flags & MMC_DATA_READ) flags |= (DP_DATA | DDIR_READ); else flags |= (DP_DATA | DDIR_WRITE); #ifdef CONFIG_MMC_OMAP_HS_ADMA if ((priv->controller_flags & OMAP_HSMMC_USE_ADMA) && !mmc_is_tuning_cmd(cmd->cmdidx)) { omap_hsmmc_prepare_data(mmc, data); flags |= DE_ENABLE; } #endif } mmc_enable_irq(mmc, cmd); writel(cmd->cmdarg, &mmc_base->arg); udelay(20); /* To fix "No status update" error on eMMC */ writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd); start = get_timer(0); do { mmc_stat = readl(&mmc_base->stat); if (get_timer(start) > MAX_RETRY_MS) { printf("%s : timeout: No status update\n", __func__); return -ETIMEDOUT; } } while (!mmc_stat); if ((mmc_stat & IE_CTO) != 0) { mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC); return -ETIMEDOUT; } else if ((mmc_stat & ERRI_MASK) != 0) return -1; if (mmc_stat & CC_MASK) { writel(CC_MASK, &mmc_base->stat); if (cmd->resp_type & MMC_RSP_PRESENT) { if (cmd->resp_type & MMC_RSP_136) { /* response type 2 */ cmd->response[3] = readl(&mmc_base->rsp10); cmd->response[2] = readl(&mmc_base->rsp32); cmd->response[1] = readl(&mmc_base->rsp54); cmd->response[0] = readl(&mmc_base->rsp76); } else /* response types 1, 1b, 3, 4, 5, 6 */ cmd->response[0] = readl(&mmc_base->rsp10); } } #ifdef CONFIG_MMC_OMAP_HS_ADMA if ((priv->controller_flags & OMAP_HSMMC_USE_ADMA) && data && !mmc_is_tuning_cmd(cmd->cmdidx)) { u32 sz_mb, timeout; if (mmc_stat & IE_ADMAE) { omap_hsmmc_dma_cleanup(mmc); return -EIO; } sz_mb = DIV_ROUND_UP(data->blocksize * data->blocks, 1 << 20); timeout = sz_mb * DMA_TIMEOUT_PER_MB; if (timeout < MAX_RETRY_MS) timeout = MAX_RETRY_MS; start = get_timer(0); do { mmc_stat = readl(&mmc_base->stat); if (mmc_stat & TC_MASK) { writel(readl(&mmc_base->stat) | TC_MASK, &mmc_base->stat); break; } if (get_timer(start) > timeout) { printf("%s : DMA timeout: No status update\n", __func__); return -ETIMEDOUT; } } while (1); omap_hsmmc_dma_cleanup(mmc); return 0; } #endif if (data && (data->flags & MMC_DATA_READ)) { mmc_read_data(mmc_base, data->dest, data->blocksize * data->blocks); } else if (data && (data->flags & MMC_DATA_WRITE)) { mmc_write_data(mmc_base, data->src, data->blocksize * data->blocks); } return 0; } static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size) { unsigned int *output_buf = (unsigned int *)buf; unsigned int mmc_stat; unsigned int count; /* * Start Polled Read */ count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; count /= 4; while (size) { ulong start = get_timer(0); do { mmc_stat = readl(&mmc_base->stat); if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for status!\n", __func__); return -ETIMEDOUT; } } while (mmc_stat == 0); if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0) mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); if ((mmc_stat & ERRI_MASK) != 0) return 1; if (mmc_stat & BRR_MASK) { unsigned int k; writel(readl(&mmc_base->stat) | BRR_MASK, &mmc_base->stat); for (k = 0; k < count; k++) { *output_buf = readl(&mmc_base->data); output_buf++; } size -= (count*4); } if (mmc_stat & BWR_MASK) writel(readl(&mmc_base->stat) | BWR_MASK, &mmc_base->stat); if (mmc_stat & TC_MASK) { writel(readl(&mmc_base->stat) | TC_MASK, &mmc_base->stat); break; } } return 0; } #if CONFIG_IS_ENABLED(MMC_WRITE) static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int size) { unsigned int *input_buf = (unsigned int *)buf; unsigned int mmc_stat; unsigned int count; /* * Start Polled Write */ count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; count /= 4; while (size) { ulong start = get_timer(0); do { mmc_stat = readl(&mmc_base->stat); if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for status!\n", __func__); return -ETIMEDOUT; } } while (mmc_stat == 0); if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0) mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); if ((mmc_stat & ERRI_MASK) != 0) return 1; if (mmc_stat & BWR_MASK) { unsigned int k; writel(readl(&mmc_base->stat) | BWR_MASK, &mmc_base->stat); for (k = 0; k < count; k++) { writel(*input_buf, &mmc_base->data); input_buf++; } size -= (count*4); } if (mmc_stat & BRR_MASK) writel(readl(&mmc_base->stat) | BRR_MASK, &mmc_base->stat); if (mmc_stat & TC_MASK) { writel(readl(&mmc_base->stat) | TC_MASK, &mmc_base->stat); break; } } return 0; } #else static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int size) { return -ENOTSUPP; } #endif static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base) { writel(readl(&mmc_base->sysctl) & ~CEN_ENABLE, &mmc_base->sysctl); } static void omap_hsmmc_start_clock(struct hsmmc *mmc_base) { writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); } static void omap_hsmmc_set_clock(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct hsmmc *mmc_base; unsigned int dsor = 0; ulong start; mmc_base = priv->base_addr; omap_hsmmc_stop_clock(mmc_base); /* TODO: Is setting DTO required here? */ mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK), (ICE_STOP | DTO_15THDTO)); if (mmc->clock != 0) { dsor = DIV_ROUND_UP(MMC_CLOCK_REFERENCE * 1000000, mmc->clock); if (dsor > CLKD_MAX) dsor = CLKD_MAX; } else { dsor = CLKD_MAX; } mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, (dsor << CLKD_OFFSET) | ICE_OSCILLATE); start = get_timer(0); while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) { if (get_timer(0) - start > MAX_RETRY_MS) { printf("%s: timedout waiting for ics!\n", __func__); return; } } priv->clock = MMC_CLOCK_REFERENCE * 1000000 / dsor; mmc->clock = priv->clock; omap_hsmmc_start_clock(mmc_base); } static void omap_hsmmc_set_bus_width(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct hsmmc *mmc_base; mmc_base = priv->base_addr; /* configue bus width */ switch (mmc->bus_width) { case 8: writel(readl(&mmc_base->con) | DTW_8_BITMODE, &mmc_base->con); break; case 4: writel(readl(&mmc_base->con) & ~DTW_8_BITMODE, &mmc_base->con); writel(readl(&mmc_base->hctl) | DTW_4_BITMODE, &mmc_base->hctl); break; case 1: default: writel(readl(&mmc_base->con) & ~DTW_8_BITMODE, &mmc_base->con); writel(readl(&mmc_base->hctl) & ~DTW_4_BITMODE, &mmc_base->hctl); break; } priv->bus_width = mmc->bus_width; } #if !CONFIG_IS_ENABLED(DM_MMC) static int omap_hsmmc_set_ios(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); #else static int omap_hsmmc_set_ios(struct udevice *dev) { struct omap_hsmmc_data *priv = dev_get_priv(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct mmc *mmc = upriv->mmc; #endif struct hsmmc *mmc_base = priv->base_addr; int ret = 0; if (priv->bus_width != mmc->bus_width) omap_hsmmc_set_bus_width(mmc); if (priv->clock != mmc->clock) omap_hsmmc_set_clock(mmc); if (mmc->clk_disable) omap_hsmmc_stop_clock(mmc_base); else omap_hsmmc_start_clock(mmc_base); #if CONFIG_IS_ENABLED(DM_MMC) if (priv->mode != mmc->selected_mode) omap_hsmmc_set_timing(mmc); #if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE) if (priv->signal_voltage != mmc->signal_voltage) ret = omap_hsmmc_set_signal_voltage(mmc); #endif #endif return ret; } #ifdef OMAP_HSMMC_USE_GPIO #if CONFIG_IS_ENABLED(DM_MMC) static int omap_hsmmc_getcd(struct udevice *dev) { int value = -1; #if CONFIG_IS_ENABLED(DM_GPIO) struct omap_hsmmc_data *priv = dev_get_priv(dev); value = dm_gpio_get_value(&priv->cd_gpio); #endif /* if no CD return as 1 */ if (value < 0) return 1; return value; } static int omap_hsmmc_getwp(struct udevice *dev) { int value = 0; #if CONFIG_IS_ENABLED(DM_GPIO) struct omap_hsmmc_data *priv = dev_get_priv(dev); value = dm_gpio_get_value(&priv->wp_gpio); #endif /* if no WP return as 0 */ if (value < 0) return 0; return value; } #else static int omap_hsmmc_getcd(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); int cd_gpio; /* if no CD return as 1 */ cd_gpio = priv->cd_gpio; if (cd_gpio < 0) return 1; /* NOTE: assumes card detect signal is active-low */ return !gpio_get_value(cd_gpio); } static int omap_hsmmc_getwp(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); int wp_gpio; /* if no WP return as 0 */ wp_gpio = priv->wp_gpio; if (wp_gpio < 0) return 0; /* NOTE: assumes write protect signal is active-high */ return gpio_get_value(wp_gpio); } #endif #endif #if CONFIG_IS_ENABLED(DM_MMC) static const struct dm_mmc_ops omap_hsmmc_ops = { .send_cmd = omap_hsmmc_send_cmd, .set_ios = omap_hsmmc_set_ios, #ifdef OMAP_HSMMC_USE_GPIO .get_cd = omap_hsmmc_getcd, .get_wp = omap_hsmmc_getwp, #endif #if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = omap_hsmmc_execute_tuning, #endif .wait_dat0 = omap_hsmmc_wait_dat0, }; #else static const struct mmc_ops omap_hsmmc_ops = { .send_cmd = omap_hsmmc_send_cmd, .set_ios = omap_hsmmc_set_ios, .init = omap_hsmmc_init_setup, #ifdef OMAP_HSMMC_USE_GPIO .getcd = omap_hsmmc_getcd, .getwp = omap_hsmmc_getwp, #endif }; #endif #if !CONFIG_IS_ENABLED(DM_MMC) int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, int wp_gpio) { struct mmc *mmc; struct omap_hsmmc_data *priv; struct mmc_config *cfg; uint host_caps_val; priv = calloc(1, sizeof(*priv)); if (priv == NULL) return -1; host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS; switch (dev_index) { case 0: priv->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; break; #ifdef OMAP_HSMMC2_BASE case 1: priv->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; #if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ defined(CONFIG_DRA7XX) || defined(CONFIG_AM33XX) || \ defined(CONFIG_AM43XX) || defined(CONFIG_ARCH_KEYSTONE)) && \ defined(CONFIG_HSMMC2_8BIT) /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */ host_caps_val |= MMC_MODE_8BIT; #endif break; #endif #ifdef OMAP_HSMMC3_BASE case 2: priv->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; #if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT) /* Enable 8-bit interface for eMMC on DRA7XX */ host_caps_val |= MMC_MODE_8BIT; #endif break; #endif default: priv->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; return 1; } #ifdef OMAP_HSMMC_USE_GPIO /* on error gpio values are set to -1, which is what we want */ priv->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); priv->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); #endif cfg = &priv->cfg; cfg->name = "OMAP SD/MMC"; cfg->ops = &omap_hsmmc_ops; cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; cfg->host_caps = host_caps_val & ~host_caps_mask; cfg->f_min = 400000; if (f_max != 0) cfg->f_max = f_max; else { if (cfg->host_caps & MMC_MODE_HS) { if (cfg->host_caps & MMC_MODE_HS_52MHz) cfg->f_max = 52000000; else cfg->f_max = 26000000; } else cfg->f_max = 20000000; } cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; #if defined(CONFIG_OMAP34XX) /* * Silicon revs 2.1 and older do not support multiblock transfers. */ if ((get_cpu_family() == CPU_OMAP34XX) && (get_cpu_rev() <= CPU_3XX_ES21)) cfg->b_max = 1; #endif mmc = mmc_create(cfg, priv); if (mmc == NULL) return -1; return 0; } #else #ifdef CONFIG_IODELAY_RECALIBRATION static struct pad_conf_entry * omap_hsmmc_get_pad_conf_entry(const fdt32_t *pinctrl, int count) { int index = 0; struct pad_conf_entry *padconf; padconf = (struct pad_conf_entry *)malloc(sizeof(*padconf) * count); if (!padconf) { debug("failed to allocate memory\n"); return 0; } while (index < count) { padconf[index].offset = fdt32_to_cpu(pinctrl[2 * index]); padconf[index].val = fdt32_to_cpu(pinctrl[2 * index + 1]); index++; } return padconf; } static struct iodelay_cfg_entry * omap_hsmmc_get_iodelay_cfg_entry(const fdt32_t *pinctrl, int count) { int index = 0; struct iodelay_cfg_entry *iodelay; iodelay = (struct iodelay_cfg_entry *)malloc(sizeof(*iodelay) * count); if (!iodelay) { debug("failed to allocate memory\n"); return 0; } while (index < count) { iodelay[index].offset = fdt32_to_cpu(pinctrl[3 * index]); iodelay[index].a_delay = fdt32_to_cpu(pinctrl[3 * index + 1]); iodelay[index].g_delay = fdt32_to_cpu(pinctrl[3 * index + 2]); index++; } return iodelay; } static const fdt32_t *omap_hsmmc_get_pinctrl_entry(u32 phandle, const char *name, int *len) { const void *fdt = gd->fdt_blob; int offset; const fdt32_t *pinctrl; offset = fdt_node_offset_by_phandle(fdt, phandle); if (offset < 0) { debug("failed to get pinctrl node %s.\n", fdt_strerror(offset)); return 0; } pinctrl = fdt_getprop(fdt, offset, name, len); if (!pinctrl) { debug("failed to get property %s\n", name); return 0; } return pinctrl; } static uint32_t omap_hsmmc_get_pad_conf_phandle(struct mmc *mmc, char *prop_name) { const void *fdt = gd->fdt_blob; const __be32 *phandle; int node = dev_of_offset(mmc->dev); phandle = fdt_getprop(fdt, node, prop_name, NULL); if (!phandle) { debug("failed to get property %s\n", prop_name); return 0; } return fdt32_to_cpu(*phandle); } static uint32_t omap_hsmmc_get_iodelay_phandle(struct mmc *mmc, char *prop_name) { const void *fdt = gd->fdt_blob; const __be32 *phandle; int len; int count; int node = dev_of_offset(mmc->dev); phandle = fdt_getprop(fdt, node, prop_name, &len); if (!phandle) { debug("failed to get property %s\n", prop_name); return 0; } /* No manual mode iodelay values if count < 2 */ count = len / sizeof(*phandle); if (count < 2) return 0; return fdt32_to_cpu(*(phandle + 1)); } static struct pad_conf_entry * omap_hsmmc_get_pad_conf(struct mmc *mmc, char *prop_name, int *npads) { int len; int count; struct pad_conf_entry *padconf; u32 phandle; const fdt32_t *pinctrl; phandle = omap_hsmmc_get_pad_conf_phandle(mmc, prop_name); if (!phandle) return ERR_PTR(-EINVAL); pinctrl = omap_hsmmc_get_pinctrl_entry(phandle, "pinctrl-single,pins", &len); if (!pinctrl) return ERR_PTR(-EINVAL); count = (len / sizeof(*pinctrl)) / 2; padconf = omap_hsmmc_get_pad_conf_entry(pinctrl, count); if (!padconf) return ERR_PTR(-EINVAL); *npads = count; return padconf; } static struct iodelay_cfg_entry * omap_hsmmc_get_iodelay(struct mmc *mmc, char *prop_name, int *niodelay) { int len; int count; struct iodelay_cfg_entry *iodelay; u32 phandle; const fdt32_t *pinctrl; phandle = omap_hsmmc_get_iodelay_phandle(mmc, prop_name); /* Not all modes have manual mode iodelay values. So its not fatal */ if (!phandle) return 0; pinctrl = omap_hsmmc_get_pinctrl_entry(phandle, "pinctrl-pin-array", &len); if (!pinctrl) return ERR_PTR(-EINVAL); count = (len / sizeof(*pinctrl)) / 3; iodelay = omap_hsmmc_get_iodelay_cfg_entry(pinctrl, count); if (!iodelay) return ERR_PTR(-EINVAL); *niodelay = count; return iodelay; } static struct omap_hsmmc_pinctrl_state * omap_hsmmc_get_pinctrl_by_mode(struct mmc *mmc, char *mode) { int index; int npads = 0; int niodelays = 0; const void *fdt = gd->fdt_blob; int node = dev_of_offset(mmc->dev); char prop_name[11]; struct omap_hsmmc_pinctrl_state *pinctrl_state; pinctrl_state = (struct omap_hsmmc_pinctrl_state *) malloc(sizeof(*pinctrl_state)); if (!pinctrl_state) { debug("failed to allocate memory\n"); return 0; } index = fdt_stringlist_search(fdt, node, "pinctrl-names", mode); if (index < 0) { debug("fail to find %s mode %s\n", mode, fdt_strerror(index)); goto err_pinctrl_state; } sprintf(prop_name, "pinctrl-%d", index); pinctrl_state->padconf = omap_hsmmc_get_pad_conf(mmc, prop_name, &npads); if (IS_ERR(pinctrl_state->padconf)) goto err_pinctrl_state; pinctrl_state->npads = npads; pinctrl_state->iodelay = omap_hsmmc_get_iodelay(mmc, prop_name, &niodelays); if (IS_ERR(pinctrl_state->iodelay)) goto err_padconf; pinctrl_state->niodelays = niodelays; return pinctrl_state; err_padconf: kfree(pinctrl_state->padconf); err_pinctrl_state: kfree(pinctrl_state); return 0; } #define OMAP_HSMMC_SETUP_PINCTRL(capmask, mode, optional) \ do { \ struct omap_hsmmc_pinctrl_state *s = NULL; \ char str[20]; \ if (!(cfg->host_caps & capmask)) \ break; \ \ if (priv->hw_rev) { \ sprintf(str, "%s-%s", #mode, priv->hw_rev); \ s = omap_hsmmc_get_pinctrl_by_mode(mmc, str); \ } \ \ if (!s) \ s = omap_hsmmc_get_pinctrl_by_mode(mmc, #mode); \ \ if (!s && !optional) { \ debug("%s: no pinctrl for %s\n", \ mmc->dev->name, #mode); \ cfg->host_caps &= ~(capmask); \ } else { \ priv->mode##_pinctrl_state = s; \ } \ } while (0) static int omap_hsmmc_get_pinctrl_state(struct mmc *mmc) { struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); struct mmc_config *cfg = omap_hsmmc_get_cfg(mmc); struct omap_hsmmc_pinctrl_state *default_pinctrl; if (!(priv->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY)) return 0; default_pinctrl = omap_hsmmc_get_pinctrl_by_mode(mmc, "default"); if (!default_pinctrl) { printf("no pinctrl state for default mode\n"); return -EINVAL; } priv->default_pinctrl_state = default_pinctrl; OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR104), sdr104, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR50), sdr50, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_DDR50), ddr50, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR25), sdr25, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(UHS_SDR12), sdr12, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(MMC_HS_200), hs200_1_8v, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_CAP(MMC_DDR_52), ddr_1_8v, false); OMAP_HSMMC_SETUP_PINCTRL(MMC_MODE_HS, hs, true); return 0; } #endif #if CONFIG_IS_ENABLED(OF_REAL) #ifdef CONFIG_OMAP54XX __weak const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr) { return NULL; } #endif static int omap_hsmmc_of_to_plat(struct udevice *dev) { struct omap_hsmmc_plat *plat = dev_get_plat(dev); struct omap_mmc_of_data *of_data = (void *)dev_get_driver_data(dev); struct mmc_config *cfg = &plat->cfg; #ifdef CONFIG_OMAP54XX const struct mmc_platform_fixups *fixups; #endif const void *fdt = gd->fdt_blob; int node = dev_of_offset(dev); int ret; plat->base_addr = map_physmem(dev_read_addr(dev), sizeof(struct hsmmc *), MAP_NOCACHE); ret = mmc_of_parse(dev, cfg); if (ret < 0) return ret; if (!cfg->f_max) cfg->f_max = 52000000; cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; cfg->f_min = 400000; cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; if (fdtdec_get_bool(fdt, node, "ti,dual-volt")) plat->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT; if (fdtdec_get_bool(fdt, node, "no-1-8-v")) plat->controller_flags |= OMAP_HSMMC_NO_1_8_V; if (of_data) plat->controller_flags |= of_data->controller_flags; #ifdef CONFIG_OMAP54XX fixups = platform_fixups_mmc(dev_read_addr(dev)); if (fixups) { plat->hw_rev = fixups->hw_rev; cfg->host_caps &= ~fixups->unsupported_caps; cfg->f_max = fixups->max_freq; } #endif return 0; } #endif #ifdef CONFIG_BLK static int omap_hsmmc_bind(struct udevice *dev) { struct omap_hsmmc_plat *plat = dev_get_plat(dev); plat->mmc = calloc(1, sizeof(struct mmc)); return mmc_bind(dev, plat->mmc, &plat->cfg); } #endif static int omap_hsmmc_probe(struct udevice *dev) { struct omap_hsmmc_plat *plat = dev_get_plat(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct omap_hsmmc_data *priv = dev_get_priv(dev); struct mmc_config *cfg = &plat->cfg; struct mmc *mmc; #ifdef CONFIG_IODELAY_RECALIBRATION int ret; #endif cfg->name = "OMAP SD/MMC"; priv->base_addr = plat->base_addr; priv->controller_flags = plat->controller_flags; priv->hw_rev = plat->hw_rev; #ifdef CONFIG_BLK mmc = plat->mmc; #else mmc = mmc_create(cfg, priv); if (mmc == NULL) return -1; #endif #if CONFIG_IS_ENABLED(DM_REGULATOR) device_get_supply_regulator(dev, "pbias-supply", &priv->pbias_supply); #endif #if defined(OMAP_HSMMC_USE_GPIO) #if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_GPIO) gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN); gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN); #endif #endif mmc->dev = dev; upriv->mmc = mmc; #ifdef CONFIG_IODELAY_RECALIBRATION ret = omap_hsmmc_get_pinctrl_state(mmc); /* * disable high speed modes for the platforms that require IO delay * and for which we don't have this information */ if ((ret < 0) && (priv->controller_flags & OMAP_HSMMC_REQUIRE_IODELAY)) { priv->controller_flags &= ~OMAP_HSMMC_REQUIRE_IODELAY; cfg->host_caps &= ~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_DDR_52) | UHS_CAPS); } #endif return omap_hsmmc_init_setup(mmc); } #if CONFIG_IS_ENABLED(OF_REAL) static const struct omap_mmc_of_data dra7_mmc_of_data = { .controller_flags = OMAP_HSMMC_REQUIRE_IODELAY, }; static const struct udevice_id omap_hsmmc_ids[] = { { .compatible = "ti,omap3-hsmmc" }, { .compatible = "ti,omap4-hsmmc" }, { .compatible = "ti,am33xx-hsmmc" }, { .compatible = "ti,am335-sdhci" }, { .compatible = "ti,dra7-hsmmc", .data = (ulong)&dra7_mmc_of_data }, { } }; #endif U_BOOT_DRIVER(omap_hsmmc) = { .name = "omap_hsmmc", .id = UCLASS_MMC, #if CONFIG_IS_ENABLED(OF_REAL) .of_match = omap_hsmmc_ids, .of_to_plat = omap_hsmmc_of_to_plat, .plat_auto = sizeof(struct omap_hsmmc_plat), #endif #ifdef CONFIG_BLK .bind = omap_hsmmc_bind, #endif .ops = &omap_hsmmc_ops, .probe = omap_hsmmc_probe, .priv_auto = sizeof(struct omap_hsmmc_data), #if !CONFIG_IS_ENABLED(OF_CONTROL) .flags = DM_FLAG_PRE_RELOC, #endif }; #endif