From bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 2 Jun 2008 17:37:28 +0200 Subject: ppc4xx: Remove superfluous dram_init() call or replace it by initdram() Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese --- board/amcc/acadia/memory.c | 15 ------------ board/amcc/bubinga/bubinga.c | 16 ------------- board/amcc/makalu/makalu.c | 5 ---- board/amcc/walnut/walnut.c | 16 ------------- board/amcc/yosemite/yosemite.c | 52 +++--------------------------------------- board/amirix/ap1000/init.S | 4 ---- board/cray/L1/init.S | 11 --------- board/csb272/csb272.c | 9 ++++++++ board/csb472/csb472.c | 9 ++++++++ board/eric/eric.c | 8 +++++++ board/esd/ar405/ar405.c | 22 ------------------ board/esd/canbt/canbt.c | 19 --------------- board/exbitgen/exbitgen.c | 9 ++++++++ board/g2000/g2000.c | 35 ---------------------------- board/jse/init.S | 10 -------- board/ml2/init.S | 4 ---- board/mpl/mip405/init.S | 13 ----------- board/mpl/pip405/init.S | 13 ----------- board/netstal/hcu4/hcu4.c | 9 -------- board/netstal/hcu5/sdram.c | 26 ++------------------- board/netstal/mcu25/mcu25.c | 9 -------- board/w7o/w7o.c | 8 +++++++ board/xilinx/ml300/init.S | 4 ---- 23 files changed, 48 insertions(+), 278 deletions(-) (limited to 'board') diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index 709d41e41a..3dec3159a5 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -33,14 +33,6 @@ extern void board_pll_init_f(void); -/* - * sdram_init - Dummy implementation for start.S, spd_sdram used on this board! - */ -void sdram_init(void) -{ - return; -} - #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) static void cram_bcr_write(u32 wr_val) { @@ -116,10 +108,3 @@ long int initdram(int board_type) return (CFG_MBYTES_RAM << 20); } - -#ifndef CONFIG_NAND_SPL -int testdram(void) -{ - return (0); -} -#endif diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c index 66e7509da8..9d508b8937 100644 --- a/board/amcc/bubinga/bubinga.c +++ b/board/amcc/bubinga/bubinga.c @@ -66,14 +66,6 @@ int checkboard(void) return (0); } -/* - * sdram_init - Dummy implementation for start.S, spd_sdram used on this board! - */ -void sdram_init(void) -{ - return; -} - /* ------------------------------------------------------------------------- initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of the necessary info for SDRAM controller configuration @@ -85,11 +77,3 @@ long int initdram(int board_type) ret = spd_sdram(); return ret; } - -int testdram(void) -{ - /* TODO: XXX XXX XXX */ - printf("test: xxx MB - ok\n"); - - return (0); -} diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index adf604f3ab..9baec9af67 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -351,8 +351,3 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_strerror(rc)); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ - -void sdram_init(void) -{ - return; -} diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index 292e02609e..641987e871 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -85,14 +85,6 @@ int checkboard(void) return (0); } -/* - * sdram_init - Dummy implementation for start.S, spd_sdram used on this board! - */ -void sdram_init(void) -{ - return; -} - /* * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of * the necessary info for SDRAM controller configuration @@ -101,11 +93,3 @@ long int initdram(int board_type) { return spd_sdram(); } - -int testdram(void) -{ - /* TODO: XXX XXX XXX */ - printf("test: xxx MB - ok\n"); - - return (0); -} diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 212fab8d08..83455375de 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -200,7 +200,7 @@ int checkboard(void) } /************************************************************************* - * sdram_init -- doesn't use serial presence detect. + * initdram -- doesn't use serial presence detect. * * Assumes: 256 MB, ECC, non-registered * PLB @ 133 MHz @@ -281,7 +281,7 @@ void sdram_tr1_set(int ram_address, int* tr1_value) *tr1_value = (first_good + last_bad) / 2; } -void sdram_init(void) +long int initdram(int board) { register uint reg; int tr1_bank1, tr1_bank2; @@ -327,57 +327,11 @@ void sdram_init(void) sdram_tr1_set(0x00000000, &tr1_bank1); sdram_tr1_set(0x08000000, &tr1_bank2); - mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) ); -} + mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800)); -/************************************************************************* - * long int initdram - * - ************************************************************************/ -long int initdram(int board) -{ - sdram_init(); return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */ } -#if defined(CFG_DRAM_TEST) -int testdram(void) -{ - unsigned long *mem = (unsigned long *)0; - const unsigned long kend = (1024 / sizeof(unsigned long)); - unsigned long k, n; - - mtmsr(0); - - for (k = 0; k < CFG_KBYTES_SDRAM; - ++k, mem += (1024 / sizeof(unsigned long))) { - if ((k & 1023) == 0) { - printf("%3d MB\r", k / 1024); - } - - memset(mem, 0xaaaaaaaa, 1024); - for (n = 0; n < kend; ++n) { - if (mem[n] != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", - (uint) & mem[n]); - return 1; - } - } - - memset(mem, 0x55555555, 1024); - for (n = 0; n < kend; ++n) { - if (mem[n] != 0x55555555) { - printf("SDRAM test fails at: %08x\n", - (uint) & mem[n]); - return 1; - } - } - } - printf("SDRAM test passes\n"); - return 0; -} -#endif - /************************************************************************* * pci_pre_init * diff --git a/board/amirix/ap1000/init.S b/board/amirix/ap1000/init.S index 3aaa5c2f1a..65f13e17a6 100644 --- a/board/amirix/ap1000/init.S +++ b/board/amirix/ap1000/init.S @@ -28,7 +28,3 @@ .globl ext_bus_cntlr_init ext_bus_cntlr_init: blr - - .globl sdram_init -sdram_init: - blr diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S index 72a10d3a1b..4b6b3f4003 100644 --- a/board/cray/L1/init.S +++ b/board/cray/L1/init.S @@ -134,14 +134,3 @@ ext_bus_cntlr_init: mtdcr ebccfgd,r4 blr - -/*----------------------------------------------------------------------------- */ -/* Function: sdram_init */ -/* Description: Configures SDRAM memory banks. */ -/* NOTE: for CrayL1 we have ECC memory, so enable it. */ -/*....now done in C in L1.c:init_sdram for readability. */ -/*----------------------------------------------------------------------------- */ - .globl sdram_init - -sdram_init: - blr diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c index 24c6f0d986..640412d10d 100644 --- a/board/csb272/csb272.c +++ b/board/csb272/csb272.c @@ -27,6 +27,8 @@ #include #include +void sdram_init(void); + /* * Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator * @@ -124,6 +126,13 @@ long initdram (int board_type) ulong bank_size; ulong tmp; + /* + * ToDo: Move the asm init routine sdram_init() to this C file, + * or even better use some common ppc4xx code available + * in cpu/ppc4xx + */ + sdram_init(); + tot_size = 0; mtdcr (memcfga, mem_mb0cf); diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c index 833bbce923..1fbf17f944 100644 --- a/board/csb472/csb472.c +++ b/board/csb472/csb472.c @@ -27,6 +27,8 @@ #include #include +void sdram_init(void); + /* * board_early_init_f: do early board initialization * @@ -92,6 +94,13 @@ long initdram (int board_type) ulong bank_size; ulong tmp; + /* + * ToDo: Move the asm init routine sdram_init() to this C file, + * or even better use some common ppc4xx code available + * in cpu/ppc4xx + */ + sdram_init(); + tot_size = 0; mtdcr (memcfga, mem_mb0cf); diff --git a/board/eric/eric.c b/board/eric/eric.c index 5413ae15c7..14ba9b0a41 100644 --- a/board/eric/eric.c +++ b/board/eric/eric.c @@ -31,6 +31,8 @@ #define PPC405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */ #define PPC405GP_GPIO0_IR 0xef60071c /* GPIO Input */ +void sdram_init(void); + int board_early_init_f (void) { @@ -127,6 +129,12 @@ long int initdram (int board_type) int TotalSize; #endif + /* + * ToDo: Move the asm init routine sdram_init() to this C file, + * or even better use some common ppc4xx code available + * in cpu/ppc4xx + */ + sdram_init(); #ifdef CONFIG_ERIC /* diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index dfead3363c..3abcfe690e 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -190,28 +190,6 @@ int checkboard (void) return 0; } -/* ------------------------------------------------------------------------- */ - -long int initdram (int board_type) -{ - unsigned long val; - - mtdcr(memcfga, mem_mb0cf); - val = mfdcr(memcfgd); - - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); -} - -/* ------------------------------------------------------------------------- */ - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - #if 1 /* test-only: some internal test routines... */ /* diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c index 055a397730..30fa605abb 100644 --- a/board/esd/canbt/canbt.c +++ b/board/esd/canbt/canbt.c @@ -181,22 +181,3 @@ int checkboard (void) return 0; } - -/* ------------------------------------------------------------------------- */ - -long int initdram (int board_type) -{ - return (16 * 1024 * 1024); -} - -/* ------------------------------------------------------------------------- */ - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/exbitgen/exbitgen.c b/board/exbitgen/exbitgen.c index 39a97225f8..49031cfce6 100644 --- a/board/exbitgen/exbitgen.c +++ b/board/exbitgen/exbitgen.c @@ -3,6 +3,8 @@ #include #include "exbitgen.h" +void sdram_init(void); + /* ************************************************************************ */ int board_early_init_f (void) /* ------------------------------------------------------------------------ -- @@ -83,6 +85,13 @@ long int initdram (int board_type) ulong bank_size; ulong tmp; + /* + * ToDo: Move the asm init routine sdram_init() to this C file, + * or even better use some common ppc4xx code available + * in cpu/ppc4xx + */ + sdram_init(); + tot_size = 0; mtdcr (memcfga, mem_mb0cf); diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index 2dfd87c78e..9fcab74849 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -149,41 +149,6 @@ long int initdram (int board_type) } -#if 1 /* test-only */ -void sdram_init(void) -{ - init_sdram_static_settings(); -} -#endif - - -#if 0 /* test-only */ -long int initdram (int board_type) -{ - unsigned long val; - - mtdcr(memcfga, mem_mb0cf); - val = mfdcr(memcfgd); - -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); -} -#endif - - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #if defined(CONFIG_CMD_NAND) #include extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; diff --git a/board/jse/init.S b/board/jse/init.S index 231cd1caf5..c564ed3c94 100644 --- a/board/jse/init.S +++ b/board/jse/init.S @@ -93,13 +93,3 @@ ext_bus_cntlr_init: mtdcr ebccfgd,r4 blr - - -/*----------------------------------------------------------------------- */ -/* Function: sdram_init */ -/* Description: This function is called by cpu/ppc4xx/start.S code */ -/* to get the SDRAM initialized. */ -/*----------------------------------------------------------------------- */ - .globl sdram_init -sdram_init: - blr diff --git a/board/ml2/init.S b/board/ml2/init.S index 80f98c5bd9..9064d3b669 100644 --- a/board/ml2/init.S +++ b/board/ml2/init.S @@ -28,7 +28,3 @@ .globl ext_bus_cntlr_init ext_bus_cntlr_init: blr - - .globl sdram_init -sdram_init: - blr diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index 3351b5b840..f00a871dfd 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -178,19 +178,6 @@ ext_bus_cntlr_init: nop /* pass2 DCR errata #8 */ blr -/*----------------------------------------------------------------------------- - * Function: sdram_init - * Description: Configures the internal SRAM memory. and setup the - * Stackpointer in it. - *----------------------------------------------------------------------------- */ - .globl sdram_init - -sdram_init: - - - blr - - #if defined(CONFIG_BOOT_PCI) .section .bootpg,"ax" .globl _start_pci diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S index 39f2ea534a..838432525d 100644 --- a/board/mpl/pip405/init.S +++ b/board/mpl/pip405/init.S @@ -175,19 +175,6 @@ nop /* pass2 DCR errata #8 */ blr -/*----------------------------------------------------------------------------- - * Function: sdram_init - * Description: Configures the internal SRAM memory. and setup the - * Stackpointer in it. - *----------------------------------------------------------------------------- */ - .globl sdram_init - -sdram_init: - - - blr - - #if defined(CONFIG_BOOT_PCI) .section .bootpg,"ax" .globl _start_pci diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index dc526fcd7a..42c7c16cdf 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -120,15 +120,6 @@ void hcu_led_set(u32 value) out_be32((u32 *)GPIO0_OR, tmp); } -/* - * sdram_init - Dummy implementation for start.S, spd_sdram or initdram - * used for HCUx - */ -void sdram_init(void) -{ - return; -} - /* * hcu_get_slot */ diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 6b1b53a4d0..d8817b831a 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -40,28 +40,6 @@ void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); -#define DDR_DCR_BASE 0x10 -#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */ -#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */ - -#define DDR0_01_INT_MASK_MASK 0x000000FF -#define DDR0_00_INT_ACK_ALL 0x7F000000 -#define DDR0_01_INT_MASK_ALL_ON 0x000000FF -#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 - -#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ -#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 -#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 - -#define DDR0_22 0x16 -/* ECC */ -#define DDR0_22_CTRL_RAW_MASK 0x03000000 -#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not enabled */ -#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC no correction */ -#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* Not a ECC RAM*/ -#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC correcting on */ -#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) - #define ECC_RAM 0x03267F0B #define NO_ECC_RAM 0x00267F0B @@ -111,11 +89,11 @@ static int wait_for_dlllock(void) /* -----------------------------------------------------------+ * Wait for the DCC master delay line to finish calibration * ----------------------------------------------------------*/ - mtdcr(ddrcfga, DDR0_17); + mtdcr(memcfga, DDR0_17); val = DDR0_17_DLLLOCKREG_UNLOCKED; while (wait != 0xffff) { - val = mfdcr(ddrcfgd); + val = mfdcr(memcfgd); if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) /* dlllockreg bit on */ diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 2b21444e2d..07891f6785 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -127,15 +127,6 @@ void hcu_led_set(u32 value) out_be16((u16 *)MCU25_LED_REGISTER_ADDRESS, value); } -/* - * sdram_init - Dummy implementation for start.S, spd_sdram or initdram - * used for HCUx - */ -void sdram_init(void) -{ - return; -} - /* * hcu_get_slot */ diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c index c56c269dae..7a3d63a4bf 100644 --- a/board/w7o/w7o.c +++ b/board/w7o/w7o.c @@ -31,6 +31,7 @@ #include unsigned long get_dram_size (void); +void sdram_init(void); /* * Macros to transform values @@ -153,6 +154,13 @@ int checkboard (void) long int initdram (int board_type) { + /* + * ToDo: Move the asm init routine sdram_init() to this C file, + * or even better use some common ppc4xx code available + * in cpu/ppc4xx + */ + sdram_init(); + return get_dram_size (); } diff --git a/board/xilinx/ml300/init.S b/board/xilinx/ml300/init.S index f753df851a..a282c9ae22 100644 --- a/board/xilinx/ml300/init.S +++ b/board/xilinx/ml300/init.S @@ -42,7 +42,3 @@ .globl ext_bus_cntlr_init ext_bus_cntlr_init: blr - - .globl sdram_init -sdram_init: - blr -- cgit v1.2.3