From 81f3a665ab2a63a31ec7a4d760b0ce8130f62a1d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 16 Apr 2024 08:55:19 +0200 Subject: common: Convert *.c/h from UTF-8 to ASCII enconfing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek Reviewed-by: Tom Rini Acked-by: Marek Behún --- .../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 2 +- .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 2 +- arch/arm/mach-imx/ddrmc-vf610-calibration.c | 12 ++++++------ arch/arm/mach-imx/mx6/clock.c | 8 ++++---- arch/arm/mach-imx/mx7/psci-mx7.c | 4 ++-- arch/mips/mach-mscc/include/mach/ddr.h | 2 +- .../mach-octeon/include/mach/cvmx-helper-pki.h | 2 +- arch/mips/mach-octeon/include/mach/cvmx-pki.h | 6 +++--- arch/mips/mach-octeon/include/mach/cvmx-pko3.h | 2 +- board/CZ.NIC/turris_mox/turris_mox.c | 2 +- board/amlogic/vim3/vim3.c | 2 +- board/bosch/acc/acc.c | 2 +- board/bosch/shc/board.c | 2 +- board/bosch/shc/board.h | 2 +- board/congatec/cgtqmx8/cgtqmx8.c | 4 ++-- board/freescale/common/i2c_mux.c | 2 +- board/siemens/capricorn/board.c | 8 ++++---- board/st/common/cmd_stboard.c | 2 +- .../starfive/visionfive2/visionfive2-i2c-eeprom.c | 4 ++-- drivers/clk/renesas/rzg2l-cpg.c | 6 +++--- drivers/clk/stm32/clk-stm32-core.h | 22 +++++++++++----------- drivers/led/led_lp5562.c | 4 ++-- drivers/mtd/nand/raw/nand_ids.c | 2 +- drivers/rng/stm32_rng.c | 6 +++--- drivers/soc/ti/k3-navss-ringacc.c | 2 +- drivers/thermal/thermal_sandbox.c | 2 +- drivers/video/renesas-r61307.c | 2 +- drivers/video/renesas-r69328.c | 2 +- drivers/xen/pvblock.c | 2 +- include/acpi/acpigen.h | 6 +++--- include/linux/mtd/mtd.h | 2 +- lib/crypto/x509_cert_parser.c | 2 +- 32 files changed, 65 insertions(+), 65 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c index 1541dfb3ec..b1bb29bcaf 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c @@ -258,7 +258,7 @@ int setup_serdes_volt(u32 svdd) /* Wait for SVDD to stabilize */ udelay(100); - /* For each PLL that’s not disabled via RCW */ + /* For each PLL that's not disabled via RCW */ #ifdef CONFIG_SYS_FSL_SRDS_1 cfg_tmp = (cfg_rcw5 >> 22) & 0x3; for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) { diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index c0efc341af..fbd5fd7d43 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -483,7 +483,7 @@ int setup_serdes_volt(u32 svdd) ret = -1; } - /* For each PLL that’s not disabled via RCW enable the SERDES */ + /* For each PLL that's not disabled via RCW enable the SERDES */ #ifdef CONFIG_SYS_FSL_SRDS_1 cfg_tmp = cfg_rcwsrds1 & 0x3; do_serdes_enable(cfg_tmp, serdes1_base); diff --git a/arch/arm/mach-imx/ddrmc-vf610-calibration.c b/arch/arm/mach-imx/ddrmc-vf610-calibration.c index cd7e95e61d..7d787d0459 100644 --- a/arch/arm/mach-imx/ddrmc-vf610-calibration.c +++ b/arch/arm/mach-imx/ddrmc-vf610-calibration.c @@ -45,7 +45,7 @@ * based on trace length differences from their * layout. * Mismatches up to 25% or tCK (clock period) are - * allowed, so the value in the filed doesn’t have + * allowed, so the value in the filed doesn't have * to be very accurate. * * - 0x2 (b'10) - RDLVL_DL_0/1 - refers to adjusting the DQS strobe in relation @@ -184,14 +184,14 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr) debug("RDLVL: PHY_RDLVL_EDGE:\t 0x%x\n", (tmp >> DDRMC_CR101_PHY_RDLVL_EDGE_OFF) & 0x1); //set 0 - /* Program Leveling mode - CR93[SW_LVL_MODE] to ’b10 */ + /* Program Leveling mode - CR93[SW_LVL_MODE] to 'b10 */ clrsetbits_le32(&ddrmr->cr[93], DDRMC_CR93_SW_LVL_MODE(0x3), DDRMC_CR93_SW_LVL_MODE(0x2)); tmp = readl(&ddrmr->cr[93]); debug("RDLVL: SW_LVL_MODE:\t 0x%x\n", (tmp >> DDRMC_CR93_SW_LVL_MODE_OFF) & 0x3); - /* Start procedure - CR93[SWLVL_START] to ’b1 */ + /* Start procedure - CR93[SWLVL_START] to 'b1 */ sw_leveling_start; /* Poll CR94[SWLVL_OP_DONE] */ @@ -211,7 +211,7 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr) 0xFFFF << DDRMC_CR105_RDLVL_DL_0_OFF, i << DDRMC_CR105_RDLVL_DL_0_OFF); - /* Load values CR93[SWLVL_LOAD] to ’b1 */ + /* Load values CR93[SWLVL_LOAD] to 'b1 */ sw_leveling_load_value; /* Poll CR94[SWLVL_OP_DONE] */ @@ -263,7 +263,7 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr) 0xFFFF << DDRMC_CR110_RDLVL_DL_1_OFF, i << DDRMC_CR110_RDLVL_DL_1_OFF); - /* Load values CR93[SWLVL_LOAD] to ’b1 */ + /* Load values CR93[SWLVL_LOAD] to 'b1 */ sw_leveling_load_value; /* Poll CR94[SWLVL_OP_DONE] */ @@ -317,7 +317,7 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr) sw_leveling_load_value; sw_leveling_op_done; - /* Exit procedure - CR94[SWLVL_EXIT] to ’b1 */ + /* Exit procedure - CR94[SWLVL_EXIT] to 'b1 */ sw_leveling_exit; /* Poll CR94[SWLVL_OP_DONE] */ diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index 1bdc568f9b..e0da9c2395 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -714,10 +714,10 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) /* * Register: PLL_VIDEO * Bit Field: POST_DIV_SELECT - * 00 — Divide by 4. - * 01 — Divide by 2. - * 10 — Divide by 1. - * 11 — Reserved + * 00 - Divide by 4. + * 01 - Divide by 2. + * 10 - Divide by 1. + * 11 - Reserved * No need to check post_div(1) */ for (post_div = 2; post_div <= 4; post_div <<= 1) { diff --git a/arch/arm/mach-imx/mx7/psci-mx7.c b/arch/arm/mach-imx/mx7/psci-mx7.c index 699a2569cb..0b71fa4034 100644 --- a/arch/arm/mach-imx/mx7/psci-mx7.c +++ b/arch/arm/mach-imx/mx7/psci-mx7.c @@ -631,9 +631,9 @@ __secure void psci_system_suspend(u32 __always_unused function_id, * Workaround: * If both CPU0/CPU1 are IDLE, the last IDLE CPU should * disable GIC first, then REG_BYPASS_COUNTER is used - * to mask wakeup INT, and then execute “wfi” is used to + * to mask wakeup INT, and then execute "wfi" is used to * bring the system into power down processing safely. - * The counter must be enabled as close to the “wfi” state + * The counter must be enabled as close to the "wfi" state * as possible. The following equation can be used to * determine the RBC counter value: * RBC_COUNT * (1/32K RTC frequency) >= diff --git a/arch/mips/mach-mscc/include/mach/ddr.h b/arch/mips/mach-mscc/include/mach/ddr.h index 3ba33d27c1..58c89d5e64 100644 --- a/arch/mips/mach-mscc/include/mach/ddr.h +++ b/arch/mips/mach-mscc/include/mach/ddr.h @@ -225,7 +225,7 @@ #define VC3_MPAR_FAW VC3_MPAR_tFAW #define VC3_MPAR_BL 4 #define MSCC_MEMPARM_MR0 ((VC3_MPAR_RL - 4) << 4) | ((VC3_MPAR_tWR - 4) << 9) -/* ODT_RTT: “0x0040” for 120ohm, and “0x0004” for 60ohm. */ +/* ODT_RTT: "0x0040" for 120ohm, and "0x0004" for 60ohm. */ #define MSCC_MEMPARM_MR1 0x0040 #define MSCC_MEMPARM_MR2 ((VC3_MPAR_WL - 5) << 3) #define MSCC_MEMPARM_MR3 0 diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h index ff32dab67b..25e2877469 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h @@ -267,7 +267,7 @@ void cvmx_helper_pki_set_fcs_op(int node, int interface, int nports, int has_fcs * buffer separate from the work queue entry. Words following the * WQE in the same cache line will be zeroed, other lines in the * buffer will not be modified and will retain stale data (from the - * buffer’s previous use). This setting may decrease the peak PKI + * buffer's previous use). This setting may decrease the peak PKI * performance by up to half on small packets. */ void cvmx_helper_pki_set_wqe_mode(int node, bool pkt_outside_wqe); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pki.h b/arch/mips/mach-octeon/include/mach/cvmx-pki.h index c1feb55a1f..d918f792ee 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pki.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pki.h @@ -110,8 +110,8 @@ enum cvmx_pki_wqe_vlan { CVMX_PKI_USE_FIRST_VLAN = 0, CVMX_PKI_USE_SECOND_VLAN } * Controls how the PKI statistics counters are handled * The PKI_STAT*_X registers can be indexed either by port kind (pkind), or * final style. (Does not apply to the PKI_STAT_INB* registers.) - * 0 = X represents the packet’s pkind - * 1 = X represents the low 6-bits of packet’s final style + * 0 = X represents the packet's pkind + * 1 = X represents the low 6-bits of packet's final style */ enum cvmx_pki_stats_mode { CVMX_PKI_STAT_MODE_PKIND, CVMX_PKI_STAT_MODE_STYLE }; @@ -880,7 +880,7 @@ int cvmx_pki_get_pkind_style(int node, int pkind); * buffer separate from the work queue entry. Words following the * WQE in the same cache line will be zeroed, other lines in the * buffer will not be modified and will retain stale data (from the - * buffer’s previous use). This setting may decrease the peak PKI + * buffer's previous use). This setting may decrease the peak PKI * performance by up to half on small packets. */ void cvmx_pki_set_wqe_mode(int node, u64 style, bool pkt_outside_wqe); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pko3.h b/arch/mips/mach-octeon/include/mach/cvmx-pko3.h index 86f89be855..bda607203f 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pko3.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pko3.h @@ -366,7 +366,7 @@ enum cvmx_pko_memalg_e { */ MEMALG_SETRSLT = 2, /* [DSZ] = B64; mem = PKO_MEM_RESULT_S. */ MEMALG_ADD = 8, /* mem = mem + PKO_SEND_MEM_S[OFFSET] */ - MEMALG_SUB = 9, /* mem = mem – PKO_SEND_MEM_S[OFFSET] */ + MEMALG_SUB = 9, /* mem = mem - PKO_SEND_MEM_S[OFFSET] */ MEMALG_ADDLEN = 0xA, /* mem += [OFFSET] + PKO_SEND_HDR_S[TOTAL] */ MEMALG_SUBLEN = 0xB, /* mem -= [OFFSET] + PKO_SEND_HDR_S[TOTAL] */ MEMALG_ADDMBUF = 0xC, /* mem += [OFFSET] + mbufs_freed */ diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c index 1a2f60e3d1..00114e6d91 100644 --- a/board/CZ.NIC/turris_mox/turris_mox.c +++ b/board/CZ.NIC/turris_mox/turris_mox.c @@ -395,7 +395,7 @@ static void load_spi_dtb(void) return; /* - * SPI NOR "dtb" partition offset & size hardcoded for now because the + * SPI NOR "dtb" partition offset & size hardcoded for now because the * mtd subsystem does not offer finding the partition yet and we do not * want to reimplement OF partition parser here. */ diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index 43d7a8e84f..a4850364f4 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -89,7 +89,7 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) /* * If in PCIe mode, alter DT - * 0：Enable USB3.0，Disable PCIE, 1：Disable USB3.0, Enable PCIE + * 0: Enable USB3.0, Disable PCIE, 1: Disable USB3.0, Enable PCIE */ if (ret > 0) { static char data[32] __aligned(4); diff --git a/board/bosch/acc/acc.c b/board/bosch/acc/acc.c index 34088adee4..65c2f35671 100644 --- a/board/bosch/acc/acc.c +++ b/board/bosch/acc/acc.c @@ -437,7 +437,7 @@ static const struct mx6_ddr3_cfg acc_mx6d_mem_ddr3_1066 = { .trcd = 1313, // 13.125ns .trcmin = 5063, // 50.625ns .trasmin = 3750, // 37.5ns - .SRT = 0, // Set to 1 for temperatures above 85°C + .SRT = 0, // Set to 1 for temperatures above 85 deg C }; static const struct mx6_ddr_sysinfo acc_mx6d_ddr_info = { diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c index 962a485acd..aebdfd4dfe 100644 --- a/board/bosch/shc/board.c +++ b/board/bosch/shc/board.c @@ -115,7 +115,7 @@ static void __maybe_unused force_modules_running(void) gpio_direction_output(WIFI_REGEN_GPIO, 1); /* * Wait for Wi-Fi power regulator to reach a stable voltage - * (soft-start time, max. 350 µs) + * (soft-start time, max. 350 us) */ __udelay(350); diff --git a/board/bosch/shc/board.h b/board/bosch/shc/board.h index 4cc02f93c6..a5e58186c9 100644 --- a/board/bosch/shc/board.h +++ b/board/bosch/shc/board.h @@ -154,7 +154,7 @@ static inline int board_is_series(void) #define HDR_FATC_LEN 12 /* -* SHC parameters held in On-Board I²C EEPROM device. +* SHC parameters held in On-Board I2C EEPROM device. * * Header Format * diff --git a/board/congatec/cgtqmx8/cgtqmx8.c b/board/congatec/cgtqmx8/cgtqmx8.c index 3b01354bb6..d8e5b1d696 100644 --- a/board/congatec/cgtqmx8/cgtqmx8.c +++ b/board/congatec/cgtqmx8/cgtqmx8.c @@ -171,7 +171,7 @@ int board_mmc_init(struct bd_info *bis) * (U-Boot device node) (Physical Port) * mmc0 (onboard eMMC) USDHC1 * mmc1 (external SD card) USDHC2 - * mmc2 (onboard µSD) USDHC3 + * mmc2 (onboard uSD) USDHC3 */ for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) { switch (i) { @@ -196,7 +196,7 @@ int board_mmc_init(struct bd_info *bis) gpio_direction_input(USDHC1_CD_GPIO); break; case 2: - /* onboard µSD */ + /* onboard uSD */ if (!imx8_power_domain_lookup_name("conn_sdhc2", &pd)) power_domain_on(&pd); diff --git a/board/freescale/common/i2c_mux.c b/board/freescale/common/i2c_mux.c index 54f89e2576..d40b34f103 100644 --- a/board/freescale/common/i2c_mux.c +++ b/board/freescale/common/i2c_mux.c @@ -12,7 +12,7 @@ /* * A new Kconfig option for something that used to always be built should be - * “default y”. + * "default y". */ #ifdef CONFIG_FSL_USE_PCA9547_MUX diff --git a/board/siemens/capricorn/board.c b/board/siemens/capricorn/board.c index 0d66a75bbf..b1d7e3b1c0 100644 --- a/board/siemens/capricorn/board.c +++ b/board/siemens/capricorn/board.c @@ -156,14 +156,14 @@ int setup_gpr_fec(void) * 0: internal clock * 1: external clock ---> your choice for RMII * - * CLKDIV_SEL: it controls a div by 2 on the internal clock path à - * it should be don’t care when using external clock + * CLKDIV_SEL: it controls a div by 2 on the internal clock path a + * it should be don't care when using external clock * 0: non-divided clock * 1: clock divided by 2 * 50_DISABLE or 125_DISABLE: - * it’s used to disable the clock tree going outside the chip + * it's used to disable the clock tree going outside the chip * when reference clock is generated internally. - * It should be don’t care when reference clock is provided + * It should be don't care when reference clock is provided * externally. * 0: clock is enabled * 1: clock is disabled diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c index cb103e69b3..c8c0bad5da 100644 --- a/board/st/common/cmd_stboard.c +++ b/board/st/common/cmd_stboard.c @@ -9,7 +9,7 @@ * - "Commercial Product Name" (CPN): type of product board (DKX, EVX) * associated to the board ID "MBxxxx" * - "Finished Good" or "Finish Good" (FG): - * effective content of the product without chip STM32MP1xx (LCD, Wifi,…) + * effective content of the product without chip STM32MP1xx (LCD, Wifi,...) * - BOM: cost variant for same FG (for example, several provider of the same * component) * diff --git a/board/starfive/visionfive2/visionfive2-i2c-eeprom.c b/board/starfive/visionfive2/visionfive2-i2c-eeprom.c index ddef7d6123..5095a0e9fd 100644 --- a/board/starfive/visionfive2/visionfive2-i2c-eeprom.c +++ b/board/starfive/visionfive2/visionfive2-i2c-eeprom.c @@ -503,7 +503,7 @@ int mac_read_from_eeprom(void) * "---" * : 4Byte, should be the output of `date +%y%W` * : 8Byte, "D008" means 8GB, "D01T" means 1TB; - * "E000" means no eMMC，"E032" means 32GB, "E01T" means 1TB. + * "E000" means no eMMC, "E032" means 32GB, "E01T" means 1TB. * : 8Byte, the Unique Identifier of board in hex. */ if (!env_get("serial#")) @@ -533,7 +533,7 @@ u8 get_pcb_revision_from_eeprom(void) * get_ddr_size_from_eeprom - get the DDR size * pstr: VF7110A1-2228-D008E000-00000001 * VF7110A1/VF7110B1 : VisionFive JH7110A /VisionFive JH7110B - * D008:　8GB LPDDR4 + * D008: 8GB LPDDR4 * E000: No emmc device, ECxx: include emmc device, xx: Capacity size[GB] * return: the field of 'D008E000' */ diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c index dba009997a..c8735d869c 100644 --- a/drivers/clk/renesas/rzg2l-cpg.c +++ b/drivers/clk/renesas/rzg2l-cpg.c @@ -313,9 +313,9 @@ static ulong rzg2l_sdhi_clk_set_rate(struct udevice *dev, const struct cpg_core_ /* * As per the HW manual, we should not directly switch from 533 MHz to - * 400 MHz and vice versa. To change the setting from 2’b01 (533 MHz) - * to 2’b10 (400 MHz) or vice versa, Switch to 2’b11 (266 MHz) first, - * and then switch to the target setting (2’b01 (533 MHz) or 2’b10 + * 400 MHz and vice versa. To change the setting from 2'b01 (533 MHz) + * to 2'b10 (400 MHz) or vice versa, Switch to 2'b11 (266 MHz) first, + * and then switch to the target setting (2'b01 (533 MHz) or 2'b10 * (400 MHz)). */ if (new_sel != SEL_SDHI_266MHz && prev_sel != SEL_SDHI_266MHz) { diff --git a/drivers/clk/stm32/clk-stm32-core.h b/drivers/clk/stm32/clk-stm32-core.h index 53c2b467ab..f9ef070200 100644 --- a/drivers/clk/stm32/clk-stm32-core.h +++ b/drivers/clk/stm32/clk-stm32-core.h @@ -178,7 +178,7 @@ int stm32_rcc_init(struct udevice *dev, * ------------------------------ ---------- * Each peripheral requires a bus interface clock, named ckg_bus_perx - * (for peripheral ‘x’). + * (for peripheral `x'). * Some peripherals (SAI, UART...) need also a dedicated clock for their * communication interface, this clock is generally asynchronous with respect to * the bus interface clock, and is named kernel clock (ckg_ker_perx). @@ -188,16 +188,16 @@ int stm32_rcc_init(struct udevice *dev, * the bus or the Kernel was enable. * * Example: - * 1) enable the bus clock - * --> bus_clk ref_counting = 1, gate_ref_count = 1 - * 2) enable the kernel clock - * --> perx_ker_ck ref_counting = 1, gate_ref_count = 2 - * 3) disable kernel clock - *  ---> perx_ker_ck ref_counting = 0, gate_ref_count = 1 - *  ==> then i will not gate because gate_ref_count > 0 - * 4) disable bus clock - * --> bus_clk ref_counting = 0, gate_ref_count = 0 - * ==> then i can gate (write in the register) because + * 1) enable the bus clock + * --> bus_clk ref_counting = 1, gate_ref_count = 1 + * 2) enable the kernel clock + * --> perx_ker_ck ref_counting = 1, gate_ref_count = 2 + * 3) disable kernel clock + * ---> perx_ker_ck ref_counting = 0, gate_ref_count = 1 + * ==> then i will not gate because gate_ref_count > 0 + * 4) disable bus clock + * --> bus_clk ref_counting = 0, gate_ref_count = 0 + * ==> then i can gate (write in the register) because * gate_ref_count = 0 */ diff --git a/drivers/led/led_lp5562.c b/drivers/led/led_lp5562.c index 431d7e10ab..0c5f9bc430 100644 --- a/drivers/led/led_lp5562.c +++ b/drivers/led/led_lp5562.c @@ -125,9 +125,9 @@ static int lp5562_led_reg_update(struct udevice *dev, int regnum, /* * Data sheet says "Delay between consecutive I2C writes to - * ENABLE register (00h) need to be longer than 488 μs + * ENABLE register (00h) need to be longer than 488 us * (typical)." and "Delay between consecutive I2C writes to - * OP_MODE register need to be longer than 153 μs (typ)." + * OP_MODE register need to be longer than 153 us (typ)." * * The linux driver does usleep_range(500, 600) and * usleep_range(200, 300), respectively. diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index 22ea5e2f90..be60d6d9d9 100644 --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c @@ -62,7 +62,7 @@ struct nand_flash_dev nand_flash_ids[] = { { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, NAND_ECC_INFO(40, SZ_1K), 4 }, - {"H27QCG8T2E5R‐BCF 64G 3.3V 8-bit", + {"H27QCG8T2E5R-BCF 64G 3.3V 8-bit", { .id = {0xad, 0xde, 0x14, 0xa7, 0x42, 0x4a} }, SZ_16K, SZ_8K, SZ_4M, NAND_NEED_SCRAMBLING, 6, 1664, NAND_ECC_INFO(56, SZ_1K), 1 }, diff --git a/drivers/rng/stm32_rng.c b/drivers/rng/stm32_rng.c index 61d5ed6158..44e8a46075 100644 --- a/drivers/rng/stm32_rng.c +++ b/drivers/rng/stm32_rng.c @@ -74,7 +74,7 @@ struct stm32_rng_plat { * Extracts from the STM32 RNG specification when RNG supports CONDRST. * * When a noise source (or seed) error occurs, the RNG stops generating - * random numbers and sets to “1” both SEIS and SECS bits to indicate + * random numbers and sets to "1" both SEIS and SECS bits to indicate * that a seed error occurred. (...) * * 1. Software reset by writing CONDRST at 1 and at 0 (see bitfield @@ -127,12 +127,12 @@ static int stm32_rng_conceal_seed_error_cond_reset(struct stm32_rng_plat *pdata) * Extracts from the STM32 RNG specification, when CONDRST is not supported * * When a noise source (or seed) error occurs, the RNG stops generating - * random numbers and sets to “1” both SEIS and SECS bits to indicate + * random numbers and sets to "1" both SEIS and SECS bits to indicate * that a seed error occurred. (...) * * The following sequence shall be used to fully recover from a seed * error after the RNG initialization: - * 1. Clear the SEIS bit by writing it to “0”. + * 1. Clear the SEIS bit by writing it to "0". * 2. Read out 12 words from the RNG_DR register, and discard each of * them in order to clean the pipeline. * 3. Confirm that SEIS is still cleared. Random number generation is diff --git a/drivers/soc/ti/k3-navss-ringacc.c b/drivers/soc/ti/k3-navss-ringacc.c index 7a2fbb0db6..ed39ff2fa4 100644 --- a/drivers/soc/ti/k3-navss-ringacc.c +++ b/drivers/soc/ti/k3-navss-ringacc.c @@ -418,7 +418,7 @@ void k3_nav_ringacc_ring_reset_dma(struct k3_nav_ring *ring, u32 occ) k3_ringacc_ring_reconfig_qmode_sci( ring, K3_NAV_RINGACC_RING_MODE_RING); /* - * 4. Ring the doorbell 2**22 – ringOcc times. + * 4. Ring the doorbell 2**22 - ringOcc times. * This will wrap the internal UDMAP ring state occupancy * counter (which is 21-bits wide) to 0. */ diff --git a/drivers/thermal/thermal_sandbox.c b/drivers/thermal/thermal_sandbox.c index acc364feb0..7dc0d108b8 100644 --- a/drivers/thermal/thermal_sandbox.c +++ b/drivers/thermal/thermal_sandbox.c @@ -12,7 +12,7 @@ int sandbox_thermal_get_temp(struct udevice *dev, int *temp) { - /* Simply return 100°C */ + /* Simply return 100 deg C */ *temp = 100; return 0; diff --git a/drivers/video/renesas-r61307.c b/drivers/video/renesas-r61307.c index 426fdc6224..986ebaf69b 100644 --- a/drivers/video/renesas-r61307.c +++ b/drivers/video/renesas-r61307.c @@ -19,7 +19,7 @@ #include /* - * The datasheet is not publicly available, all values are + * The datasheet is not publicly available, all values are * taken from the downstream. If you have access to datasheets, * corrections are welcome. */ diff --git a/drivers/video/renesas-r69328.c b/drivers/video/renesas-r69328.c index d2f7169468..f14f7642d0 100644 --- a/drivers/video/renesas-r69328.c +++ b/drivers/video/renesas-r69328.c @@ -19,7 +19,7 @@ #include /* - * The datasheet is not publicly available, all values are + * The datasheet is not publicly available, all values are * taken from the downstream. If you have access to datasheets, * corrections are welcome. */ diff --git a/drivers/xen/pvblock.c b/drivers/xen/pvblock.c index 1df04e239a..9fc51d203e 100644 --- a/drivers/xen/pvblock.c +++ b/drivers/xen/pvblock.c @@ -79,7 +79,7 @@ struct blkfront_plat { }; /** - * struct blkfront_aiocb - AIO сontrol block + * struct blkfront_aiocb - AIO control block * @aio_dev: Blockfront device * @aio_buf: Memory buffer, which must be sector-aligned for * @aio_dev sector diff --git a/include/acpi/acpigen.h b/include/acpi/acpigen.h index 2c269ed662..3aa94d70b9 100644 --- a/include/acpi/acpigen.h +++ b/include/acpi/acpigen.h @@ -121,7 +121,7 @@ struct acpi_cstate { * * @percent: Percent of the core CPU operating frequency that will be * available when this throttling state is invoked - * @power: Throttling state’s maximum power dissipation (mw) + * @power: Throttling state's maximum power dissipation (mw) * @latency: Worst-case latency (uS) that the CPU is unavailable during a * transition from any throttling state to this throttling state * @control: Value to be written to the Processor Control Register @@ -920,7 +920,7 @@ void acpigen_write_pss_package(struct acpi_ctx *ctx, uint corefreq, uint power, * @ctx: ACPI context pointer * @domain: Dependency domain number to which this P state entry belongs * @numprocs: Number of processors belonging to the domain for this logical - * processor’s P-states + * processor's P-states * @coordtype: Coordination type */ void acpigen_write_psd_package(struct acpi_ctx *ctx, uint domain, uint numprocs, @@ -972,7 +972,7 @@ void acpigen_write_tss_package(struct acpi_ctx *ctx, * @ctx: ACPI context pointer * @domain: dependency domain number to which this T state entry belongs * @numprocs: Number of processors belonging to the domain for this logical - * processor’s T-states + * processor's T-states * @coordtype: Coordination type */ void acpigen_write_tsd_package(struct acpi_ctx *ctx, uint domain, uint numprocs, diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 7a66c7af74..ee18a63e46 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -153,7 +153,7 @@ struct mtd_info { uint32_t flags; uint64_t size; // Total size of the MTD - /* "Major" erase size for the device. Naïve users may take this + /* "Major" erase size for the device. Naive users may take this * to be the only erase size available, or may use the more detailed * information below if they desire */ diff --git a/lib/crypto/x509_cert_parser.c b/lib/crypto/x509_cert_parser.c index a0f0689118..34de75a3ec 100644 --- a/lib/crypto/x509_cert_parser.c +++ b/lib/crypto/x509_cert_parser.c @@ -535,7 +535,7 @@ int x509_process_extension(void *context, size_t hdrlen, * Decode an ASN.1 universal time or generalised time field into a struct the * kernel can handle and check it for validity. The time is decoded thus: * - * [RFC5280 §4.1.2.5] + * [RFC5280 paragraph 74.1.2.5] * CAs conforming to this profile MUST always encode certificate validity * dates through the year 2049 as UTCTime; certificate validity dates in * 2050 or later MUST be encoded as GeneralizedTime. Conforming -- cgit v1.2.3