summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2021-12-26tools: avoid OpenSSL deprecation warningsHeinrich Schuchardt3-0/+7
Our Gitlab CI buildsystem is set up to treat warnings as errors. With OpenSSL 3.0 a lot of deprecation warnings occur. With the patch compatibility with OpenSSL 1.1.1 is declared. In the long run we should upgrade our code to use the current API. A -Wdiscarded-qualifiers warning is muted by casting. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-26efi_loader: Don't limit the StMM buffer size explicitlyIlias Apalodimas1-11/+5
Currently we allow and explicitly check a single shared page with StandAloneMM. This is dictated by OP-TEE which runs the application. However there's no way for us dynamically discover the number of pages we are allowed to use. Since writing big EFI signature list variable requires more than a page, OP-TEE has bumped the number of shared pages to four. Let's remove our explicit check and allow the request to reach OP-TEE even if it's bigger than what it supports. There's no need to sanitize the number of pages internally. OP-TEE will fail if we try to write more than it's allowed. The error will just trigger later on, during the StMM access. While at it add an error message to help users figure out what failed. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
2021-12-09efi: Rename UCLASS_EFI and IF_TYPE_EFISimon Glass2-8/+8
These names are better used for access to devices provided by an EFI layer. Use EFI_LOADER instead here, since these are only available in U-Boot's EFI_LOADER layer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09efi_loader: correctly handle no tpm device errorMasahisa Kojima3-8/+18
When the TCG2 protocol is installed in efi_tcg2_register(), TPM2 device must be present. tcg2_measure_pe_image() expects that TCP2 protocol is installed and TPM device is available. If TCG2 Protocol is installed but TPM device is not found, tcg2_measure_pe_image() returns EFI_SECURITY_VIOLATION and efi_load_image() ends with failure. The same error handling is applied to efi_tcg2_measure_efi_app_invocation(). Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-12-09efi_loader: check tcg2 protocol installation outside the TCG protocolMasahisa Kojima1-0/+18
There are functions that calls tcg2_agile_log_append() outside of the TCG protocol invocation (e.g tcg2_measure_pe_image). These functions must to check that TCG2 protocol is installed. If not, measurement shall be skipped. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-12-09efi_loader: efi_tcg2_register returns appropriate errorMasahisa Kojima3-18/+53
This commit modify efi_tcg2_register() to return the appropriate error. With this fix, sandbox will not boot because efi_tcg2_register() fails due to some missing feature in GetCapabilities. So disable sandbox if EFI_TCG2_PROTOCOL is enabled. UEFI secure boot variable measurement is not directly related to TCG2 protocol installation, tcg2_measure_secure_boot_variable() is moved to the separate function. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-30efi_loader: Extend PCR's for firmware measurementsRuchika Gupta1-0/+76
Firmwares before U-Boot may be capable of doing tpm measurements and passing them to U-Boot in the form of eventlog. However there may be scenarios where the firmwares don't have TPM driver and are not capable of extending the measurements in the PCRs. Based on TCG spec, if previous firnware has extended PCR's, PCR0 would not be 0. So, read the PCR0 to determine if the PCR's need to be extended as eventlog is parsed or not. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-30tpm: use more algorithms than sha256 on pcr_readRuchika Gupta1-4/+8
The current tpm2_pcr_read is hardcoded using SHA256. Make the actual command to TPM configurable to use wider range of algorithms. The current command line is kept as is i.e limited to SHA-256 only. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-30efi_loader: Add check for event log passed from firmwareRuchika Gupta1-69/+400
Platforms may have support to measure their initial firmware components and pass the event log to u-boot. The event log address can be passed in property tpm_event_log_addr and tpm_event_log_size of the tpm node. Platforms may choose their own specific mechanism to do so. A weak function is added to check if even log has been passed to u-boot from earlier firmware components. If available, the eventlog is parsed to check for its correctness and further event logs are appended to the passed log. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-26efi_selftest: simplify endian conversion for FDT testHeinrich Schuchardt1-7/+8
UEFI code is always little-endian. Remove a superfluous test. Remove a superfluous type conversion. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-26efi_loader: segfault in efi_clear_os_indications()Heinrich Schuchardt2-50/+31
If we call efi_clear_os_indications() before initializing the memory store for UEFI variables a NULL pointer dereference occurs. The error was observed on the sandbox with: usb start host bind 0 sandbox.img load host 0:1 $kernel_addr_r helloworld.efi bootefi $kernel_addr_r Here efi_resister_disk() failed due to an error in the BTRFS implementation. Move the logic to clear EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED to the rest of the capsule code. If CONFIG_EFI_IGNORE_OSINDICATIONS=y, we should still clear the flag. If OsIndications does not exist, we should not create it as it is owned by the operating system. Fixes: 149108a3eb59 ("efi_loader: clear OsIndications") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-26efi_loader: efi_disk_register() should not failHeinrich Schuchardt1-2/+2
Our algorithm for creating USB device paths may lead to duplicate device paths which result in efi_disk_register() failing. Instead we should just skip devices that cannot be registered as EFI block devices. Fix a memory leak in efi_disk_add_dev() caused by the duplicate device path. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-26efi: Call bootm_disable_interrupts earlier in efi_exit_boot_servicesTom Rini1-3/+1
If we look at the path that bootm/booti take when preparing to boot the OS, we see that as part of (or prior to calling do_bootm_states, explicitly) the process, bootm_disable_interrupts() is called prior to announce_and_cleanup() which is where udc_disconnect() / board_quiesce_devices() / dm_remove_devices_flags() are called from. In the EFI path, these are called afterwards. In efi_exit_boot_services() however we have been calling bootm_disable_interrupts() after the above functions, as part of ensuring that we disable interrupts as required by the spec. However, bootm_disable_interrupts() is also where we go and call usb_stop(). While this has been fine before, on the TI J721E platform this leads us to an exception. This exception seems likely to be the case that we're trying to stop devices that we have already disabled clocks for. The most direct way to handle this particular problem is to make EFI behave like the do_bootm_states() process and ensure we call bootm_disable_interrupts() prior to ending up in usb_stop(). Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Simon Glass <sjg@chromium.org> Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-20efi_loader: startup the tpm device when installing the protocolIlias Apalodimas1-0/+9
Due to U-Boot's lazy binding mentality the TPM is probed but not properly initialized. The user can startup the device from the command line e.g 'tpm2 startup TPM2_SU_CLEAR'. However we can initialize the TPM during the TCG protocol installation, which is easier to use overall. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-20efi_loader: fix FinalEvents table if an EFI app invoked GetEventLogIlias Apalodimas1-29/+70
As described in the TCG spec [1] in sections 7.1.1 and 7.1.2 the FinalEvent table should include events after GetEventLog has been called. This currently works for us as long as the kernel is the only EFI application calling that. Specifically we only implement what's described in 7.1.1. So refactor the code a bit and support EFI application(s) calling GetEventLog. Events will now be logged in both the EventLog and FinalEvent table as long as ExitBootServices haven't been invoked. [1] https://trustedcomputinggroup.org/wp-content/uploads/EFI-Protocol-Specification-rev13-160330final.pdf Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-20efi_selftest: unit test for EFI_GROUP_BEFORE_EXIT_BOOT_SERVICEHeinrich Schuchardt1-11/+56
Add a test for the EFI_GROUP_BEFORE_EXIT_BOOT_SERVICE event group. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-20efi_loader: EFI_EVENT_GROUP_BEFORE_EXIT_BOOT_SERVICESHeinrich Schuchardt1-0/+13
Implement the EFI_EVENT_GROUP_BEFORE_EXIT_BOOT_SERVICES event group handling. Add the definition of EFI_EVENT_GROUP_AFTER_READY_TO_BOOT. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-20efi_loader: capsule: Record capsule result only if capsule is readMasami Hiramatsu1-3/+3
Record capsule update result only if the capsule file is successfully read, because the capsule GUID is not sure when the file can not be read or the file is not a capsule. Without this fix, if user puts a dummy (non-capsule) file under (ESP)EFI/UpdateCapsule, U-Boot causes a synchronous abort. This also fixes use-after-free bug of the 'capsule' variable. Fixes: c74cd8bd08d1 ("efi_loader: capsule: add capsule_on_disk support") Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-20efi_loader: Reduce efi_tcg2 logging statementMasahisa Kojima1-1/+1
log_info() is used for the debug level logging statement which should use log_debug() instead. Convert it to reduce the log output. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-20lmb: fix typo 'commun'Heinrich Schuchardt1-1/+1
%s/commun/common/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-19Merge tag 'tpm-19112021' of https://source.denx.de/u-boot/custodians/u-boot-tpmTom Rini1-2/+2
TPM1.2 and Atmel fixes # gpg verification failed.
2021-11-18arm64: Add missing GD_FLG_SKIP_RELOC handlingMarek Vasut1-0/+3
In case U-Boot enters relocation with GD_FLG_SKIP_RELOC, skip the relocation. The code still has to set up new_gd pointer and new stack pointer. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2021-11-18lmb: Reserve U-Boot separately if relocation is disabledMarek Vasut1-0/+5
In case U-Boot starts with GD_FLG_SKIP_RELOC, the U-Boot code is not relocated, however the stack and heap is at the end of DRAM after relocation. Reserve a LMB area for the non-relocated U-Boot code so it won't be overwritten. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2021-11-17cmd: tpm-v1: fix load_key_by_sha1 compile errorsMathew McBride1-2/+2
This command is not compiled by default and has not been updated alongside changes to the tpmv1 API, such as passing the TPM udevice to the relevant functions. Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-13Merge tag 'efi-2022-01-rc2-2' of ↵Tom Rini1-2/+2
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc2-2 UEFI: * fix measurement of BootOrder variable for TCG2 protocol TPM: * TIS mmio driver. This driver supports QEMU's emulated TPM.
2021-11-11lib: Add a function to convert a string to a hex valueSimon Glass1-2/+18
Add an xtoa() function, similar to itoa() but for hex instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-10efi_loader: fix BootOrder variable measurement handlingMasahisa Kojima1-2/+2
UEFI specification does not require that BootOrder is defined. In current implementation, boot variable measurement fails and returns EFI_NOT_FOUND if BootOrder is not defined. This commit correcly handles this case, skip the boot variable measurement if BootOrder is not defined. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-07efi_selftest: add selftest for EFI_TCG2_PROTOCOL and Measured BootMasahisa Kojima7-1/+2023
This commit adds the missing EFI_TCG2_PROTOCOL selftest and Measured Boot selftest in lib/efi_selftest. This selftest includes PE/COFF image measurement test, some PCR values are different in each architecture. With that, this commit also adds pre-built versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and riscv64. Prebuilding avoids the problem of reproducible builds. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Make the test 'onrequest'. Add code comments to the includes with the binaries. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Add a way to obtain boot services in the appSimon Glass1-0/+10
Add a function to return this information along with a stub for the efi_info_get() function, since calling it otherwise hangs U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07x86: Don't duplicate global_ptr in 64-bit EFI appSimon Glass1-0/+9
This variable is already defined by the EFI code. Drop the duplicate definition when building a 64-bit EFI app. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Create a 64-bit appSimon Glass1-0/+1
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07x86: Create a 32/64-bit selection for the appSimon Glass1-8/+26
Most EFI implementations use 64-bit but U-Boot only supports running as a 32-bit app at present. While efi-x86_payload64 does boot from 64-bit UEFI it immediately changes back to 32-bit before starting U-Boot. In order to support a 64-bit U-Boot app, update the Kconfig to add an option for 32/64 bit. Update the prompt for the existing option so it is clear it relates to the stub. Move both up to just under the choice that controls them, since this looks better and the menu. Use CONFIG_EFI_APP in the Makefile instead of CONFIG_TARGET_EFI_APP, since the latter is specific to a single target and we will have two. Memory size is set to 32MB for now so that it can run on qemu without increasing the default memory size. We may need to increase the default later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi_loader: add EFI_TCG2_PROTOCOL.SubmitCommandMasahisa Kojima2-6/+38
This commit adds the EFI_TCG2_PROTOCOL.SubmitCommand required in the TCG PC Client PFP spec. SubmitCommand enables to send the raw command to the TPM device. To implement this api, tpm2_submit_command() is added into tpm-v2.c. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-07efi_loader: use byteshift unaligned access helperMasahisa Kojima1-1/+2
Calling unaligned/access-ok.h version of put_unaligned_le64() causes data abort in arm 32-bit QEMU. The similar issue also occurs in linux kernel, unaligned/access-ok.h is no longer used in linux kernel[1]. This commit uses the unaligned/be_byteshift.h and unaligned/le_byteshift.h helper instead of unaligned/access-ok.h. [1]https://lore.kernel.org/all/20210507220813.365382-8-arnd@kernel.org/ Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-07efi_loader: capsule: drop __weak from efi_get_public_key_data()AKASHI Takahiro1-1/+1
As we discussed in ML, currently a device tree is the only place to store public keys for capsule authentication. So __weak is not necessary for now. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas1-7/+7
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26Merge tag 'efi-2022-01-rc1-2' of ↵Tom Rini12-111/+514
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1-2 doc: Remove obsolete PPC4XX references UEFI: Implement missing TCG2 measurements Code clean up # gpg: Signature made Tue 26 Oct 2021 05:56:47 PM EDT # gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4 # gpg: Good signature from "Heinrich Schuchardt <xypron.glpk@gmx.de>" [unknown] # gpg: aka "[jpeg image of size 1389]" [unknown] # Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
2021-10-26efi_loader: add DeployedMode and AuditMode variable measurementMasahisa Kojima1-8/+25
This commit adds the DeployedMode and AuditMode variable measurement required in TCG PC Client Platform Firmware Profile Specification. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26efi_loader: simplify tcg2_measure_secure_boot_variable()Masahisa Kojima1-42/+18
This commit simplifies tcg2_measure_secure_boot_variable() using secure_variables table. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26efi_loader: add UEFI GPT measurementMasahisa Kojima3-2/+173
This commit adds the UEFI GPT disk partition topology measurement required in TCG PC Client Platform Firmware Profile Specification Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26lib: uuid: fix the test on RNG device presencePatrick Delaunay1-1/+1
Correct the test on RNG device presence,when ret is equal to 0, before to call dm_rng_read function. Without this patch the RNG device is not used when present (when ret == 0) or a data abort occurs in dm_rng_read when CONFIG_DM_RNG is activated but the RNG device is not present in device tree (ret != 0 and devp = NULL). Fixes: 92fdad28cfdf ("lib: uuid: use RNG device if present") CC: Matthias Brugger <mbrugger@suse.com> CC: Torsten Duwe <duwe@suse.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26lib: rsa: rsa-verify: also check that padding is not NULLPhilippe Reynes1-1/+1
This commit adds a check on the padding in the function rsa_verify_key to avoid using a NULL pointer. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26efi_loader: add SMBIOS table measurementMasahisa Kojima5-12/+229
TCG PC Client Platform Firmware Profile Specification requires to measure the SMBIOS table that contains static configuration information (e.g. Platform Manufacturer Enterprise Number assigned by IANA, platform model number, Vendor and Device IDs for each SMBIOS table). The device- and environment-dependent information such as serial number is cleared to zero or space character for the measurement. Existing smbios_string() function returns pointer to the string with const qualifier, but exisintg use case is updating version string and const qualifier must be removed. This commit removes const qualifier from smbios_string() return value and reuses to clear the strings for the measurement. This commit also fixes the following compiler warning: lib/smbios-parser.c:59:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] const struct smbios_header *header = (struct smbios_header *)entry->struct_table_address; Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-25efi_loader: simplify tcg2_measure_secure_boot_variable()Heinrich Schuchardt1-16/+13
Don't duplicate GUIDs. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-25efi_loader: simplify efi_sigstore_parse_sigdb()Heinrich Schuchardt1-33/+5
Simplify efi_sigstore_parse_sigdb() by using existing functions. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-25efi_loader: function to get GUID for variable nameHeinrich Schuchardt1-0/+9
In multiple places we need the default GUID matching a variable name. The patch provides a library function. For secure boot related variables like 'PK', 'KEK', 'db' a lookup table is used. For all other variable names EFI_GLOBAL_VARIABLE is returned. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-25efi_loader: treat UEFI variable name as constHeinrich Schuchardt5-16/+23
UEFI variable names are typically constants and hence should be defined as const. Unfortunately some of our API functions do not define the parameters for UEFI variable names as const. This requires unnecessary conversions. Adjust parameters of several internal functions to tre UEFI variable names as const. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-25efi_loader: capsule: add back efi_get_public_key_data()AKASHI Takahiro1-0/+36
The commit 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to .rodata"") failed to revert the removal of efi_get_public_key_data(). Add back this function and move it under lib/efi_loader so that other platforms can utilize it. It is now declared as a weak function so that it can be replaced with a platform-specific implementation. Fixes: 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to .rodata"") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-25efi_loader: add missing const qualifierMasahisa Kojima1-2/+3
This commit fixes the following compilation warning of boottime->install_configuration_table() function. lib/efi_selftest/efi_selftest_tcg2.c:475:46: warning: passing argument 1 of ‘boottime->install_configuration_table’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] ret = boottime->install_configuration_table(&smbios_guid, dmi); Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini10-191/+152
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 17:45:37 +0000