summaryrefslogtreecommitdiff
path: root/include/net.h
AgeCommit message (Collapse)AuthorFilesLines
2023-06-14cmd: net: add a 'net stats' command to dump network statisticsIoana Ciornei1-0/+6
Add a new option to the 'net' command which can be used to dump network statistics. To do this, 3 new callbacks are added to the eth_ops structure: .get_sset_count(), .get_strings(), .get_stats(). These callbacks have the same functions as in Linux: to return the number of counters, the strings which describe those counters and the actual values. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-05net: ipv6: Add support for default gateway discovery.Ehsan Mohandesi1-1/+1
In IPv6, the default gateway and prefix length are determined by receiving a router advertisement as defined in - https://www.rfc-editor.org/rfc/rfc4861. Add support for sending router solicitation (RS) and processing router advertisements (RA). If the RA has prefix info option and following conditions are met, then gatewayip6 and net_prefix_length of ip6addr env variables are initialized. These are later consumed by IPv6 code for non-local destination IP. - "Router Lifetime" != 0 - Prefix is NOT link-local prefix (0xfe80::/10) - L flag is 1 - "Valid Lifetime" != 0 Timing Parameters: - MAX_RTR_SOLICITATION_DELAY (0-1s) - RTR_SOLICITATION_INTERVAL (4s) (min retransmit delay) - MAX_RTR_SOLICITATIONS (3 RS transmissions) The functionality is enabled by CONFIG_IPV6_ROUTER_DISCOVERY and invoked automatically from net_init_loop(). Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com> Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>Reviewed-by: Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Tested-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Sergei Antonov <saproj@gmail.com>
2023-05-05net: add fastboot TCP supportDmitrii Merkurev1-1/+2
Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-05net: dhcp6: Add DHCPv6 (DHCP for IPv6)Sean Edmond1-2/+4
Adds DHCPv6 protocol to u-boot. Allows for address assignement with DHCPv6 4-message exchange (SOLICIT->ADVERTISE->REQUEST->REPLY). Includes DHCPv6 options required by RFC 8415. Also adds DHCPv6 options required for PXE boot. Possible enhancements: - Duplicate address detection on DHCPv6 assigned address - IPv6 address assignement through SLAAC - Sending/parsing other DHCPv6 options (NTP, DNS, etc...) Signed-off-by: Sean Edmond <seanedmond@microsoft.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-23net: Add a function to run dhcpSimon Glass1-0/+15
At present this must be done by executing the command. Also it involves fiddling with the environment to determine the correct autoload behaviour. Ideally it should be possible to run network operations without even having the command line present (CONFIG_CMDLINE). For now, add a function to handle DHCP, so it can be called from a bootdev more easily. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-23sandbox: Allow ethernet bootdevs to be disabled for testsSimon Glass1-0/+16
Most tests don't want these and can create a lot of noise. Add a way to disable them. Use that in tests, with a flag provided to enable them for tests that need this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-12-07net: Remove eth_legacy.cTom Rini1-71/+0
As there are no more non-DM_ETH cases for networking, remove this legacy file and update the Makefile to match current usage. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05net: ping6: Add ping6 commandViacheslav Mitrofanov1-2/+2
Implement ping6 command to ping hosts using IPv6. It works the same way as an ordinary ping command. There is no ICMP request so it is not possible to ping our host. This patch adds options in Kconfig and Makefile to build ping6 command. Series-changes: 3 - Added structures and functions descriptions - Added to ping6_receive() return value instead of void Series-changes: 4 - Fixed structures and functions description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-28net: Add wget applicationYing-Chun Liu (PaulLiu)1-1/+1
This commit adds a simple wget command that can download files from http server. The command syntax is wget ${loadaddr} <path of the file from server> Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-11-28net: Add TCP protocolYing-Chun Liu (PaulLiu)1-9/+27
Currently file transfers are done using tftp or NFS both over udp. This requires a request to be sent from client (u-boot) to the boot server. The current standard is TCP with selective acknowledgment. Signed-off-by: Duncan Hare <DH@Synoia.com> Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-10-21net: NC-SI setup and handlingSamuel Mendoza-Jonas1-1/+1
Add the handling of NC-SI ethernet frames, and add a check at the start of net_loop() to configure NC-SI before starting other network commands. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-08net: bootp: Make root path (option 17) length configurableAndre Kalb1-1/+3
to adjust the root path length. Eg to 256 from Linux Kernel Signed-off-by: Andre Kalb <andre.kalb@sma.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> [trini: Guard extern so that !CONFIG_NET platforms will build] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-03net: Check for the minimum IP fragmented datagram sizeFabio Estevam1-0/+2
Nicolas Bidron and Nicolas Guigo reported the two bugs below: " ----------BUG 1---------- In compiled versions of U-Boot that define CONFIG_IP_DEFRAG, a value of `ip->ip_len` (IP packet header's Total Length) higher than `IP_HDR_SIZE` and strictly lower than `IP_HDR_SIZE+8` will lead to a value for `len` comprised between `0` and `7`. This will ultimately result in a truncated division by `8` resulting value of `0` forcing the hole metadata and fragment to point to the same location. The subsequent memcopy will overwrite the hole metadata with the fragment data. Through a second fragment, this can be exploited to write to an arbitrary offset controlled by that overwritten hole metadata value. This bug is only exploitable locally as it requires crafting two packets the first of which would most likely be dropped through routing due to its unexpectedly low Total Length. However, this bug can potentially be exploited to root linux based embedded devices locally. ```C static struct ip_udp_hdr *__net_defragment(struct ip_udp_hdr *ip, int *lenp) { static uchar pkt_buff[IP_PKTSIZE] __aligned(PKTALIGN); static u16 first_hole, total_len; struct hole *payload, *thisfrag, *h, *newh; struct ip_udp_hdr *localip = (struct ip_udp_hdr *)pkt_buff; uchar *indata = (uchar *)ip; int offset8, start, len, done = 0; u16 ip_off = ntohs(ip->ip_off); /* payload starts after IP header, this fragment is in there */ payload = (struct hole *)(pkt_buff + IP_HDR_SIZE); offset8 = (ip_off & IP_OFFS); thisfrag = payload + offset8; start = offset8 * 8; len = ntohs(ip->ip_len) - IP_HDR_SIZE; ``` The last line of the previous excerpt from `u-boot/net/net.c` shows how the attacker can control the value of `len` to be strictly lower than `8` by issuing a packet with `ip_len` between `21` and `27` (`IP_HDR_SIZE` has a value of `20`). Also note that `offset8` here is `0` which leads to `thisfrag = payload`. ```C } else if (h >= thisfrag) { /* overlaps with initial part of the hole: move this hole */ newh = thisfrag + (len / 8); *newh = *h; h = newh; if (h->next_hole) payload[h->next_hole].prev_hole = (h - payload); if (h->prev_hole) payload[h->prev_hole].next_hole = (h - payload); else first_hole = (h - payload); } else { ``` Lower down the same function, execution reaches the above code path. Here, `len / 8` evaluates to `0` leading to `newh = thisfrag`. Also note that `first_hole` here is `0` since `h` and `payload` point to the same location. ```C /* finally copy this fragment and possibly return whole packet */ memcpy((uchar *)thisfrag, indata + IP_HDR_SIZE, len); ``` Finally, in the above excerpt the `memcpy` overwrites the hole metadata since `thisfrag` and `h` both point to the same location. The hole metadata is effectively overwritten with arbitrary data from the fragmented IP packet data. If `len` was crafted to be `6`, `last_byte`, `next_hole`, and `prev_hole` of the `first_hole` can be controlled by the attacker. Finally the arbitrary offset write occurs through a second fragment that only needs to be crafted to write data in the hole pointed to by the previously controlled hole metadata (`next_hole`) from the first packet. ### Recommendation Handle cases where `len` is strictly lower than 8 by preventing the overwrite of the hole metadata during the memcpy of the fragment. This could be achieved by either: * Moving the location where the hole metadata is stored when `len` is lower than `8`. * Or outright rejecting fragmented IP datagram with a Total Length (`ip_len`) lower than 28 bytes which is the minimum valid fragmented IP datagram size (as defined as the minimum fragment of 8 octets in the IP Specification Document: [RFC791](https://datatracker.ietf.org/doc/html/rfc791) page 25). ----------BUG 2---------- In compiled versions of U-Boot that define CONFIG_IP_DEFRAG, a value of `ip->ip_len` (IP packet header's Total Length) lower than `IP_HDR_SIZE` will lead to a negative value for `len` which will ultimately result in a buffer overflow during the subsequent `memcpy` that uses `len` as it's `count` parameter. This bug is only exploitable on local ethernet as it requires crafting an invalid packet to include an unexpected `ip_len` value in the IP UDP header that's lower than the minimum accepted Total Length of a packet (21 as defined in the IP Specification Document: [RFC791](https://datatracker.ietf.org/doc/html/rfc791)). Such packet would in all likelihood be dropped while being routed to its final destination through most routing equipment and as such requires the attacker to be in a local position in order to be exploited. ```C static struct ip_udp_hdr *__net_defragment(struct ip_udp_hdr *ip, int *lenp) { static uchar pkt_buff[IP_PKTSIZE] __aligned(PKTALIGN); static u16 first_hole, total_len; struct hole *payload, *thisfrag, *h, *newh; struct ip_udp_hdr *localip = (struct ip_udp_hdr *)pkt_buff; uchar *indata = (uchar *)ip; int offset8, start, len, done = 0; u16 ip_off = ntohs(ip->ip_off); /* payload starts after IP header, this fragment is in there */ payload = (struct hole *)(pkt_buff + IP_HDR_SIZE); offset8 = (ip_off & IP_OFFS); thisfrag = payload + offset8; start = offset8 * 8; len = ntohs(ip->ip_len) - IP_HDR_SIZE; ``` The last line of the previous excerpt from `u-boot/net/net.c` shows where the underflow to a negative `len` value occurs if `ip_len` is set to a value strictly lower than 20 (`IP_HDR_SIZE` being 20). Also note that in the above excerpt the `pkt_buff` buffer has a size of `CONFIG_NET_MAXDEFRAG` which defaults to 16 KB but can range from 1KB to 64 KB depending on configurations. ```C /* finally copy this fragment and possibly return whole packet */ memcpy((uchar *)thisfrag, indata + IP_HDR_SIZE, len); ``` In the above excerpt the `memcpy` overflows the destination by attempting to make a copy of nearly 4 gigabytes in a buffer that's designed to hold `CONFIG_NET_MAXDEFRAG` bytes at most which leads to a DoS. ### Recommendation Stop processing of the packet if `ip_len` is lower than 21 (as defined by the minimum length of a data carrying datagram in the IP Specification Document: [RFC791](https://datatracker.ietf.org/doc/html/rfc791) page 34)." Add a check for ip_len lesser than 28 and stop processing the packet in this case. Such a check covers the two reported bugs. Reported-by: Nicolas Bidron <nicolas.bidron@nccgroup.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-03-25Convert CONFIG_SYS_RX_ETH_BUFFER to KconfigTom Rini1-7/+1
This converts the following to Kconfig: CONFIG_SYS_RX_ETH_BUFFER Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt1-7/+7
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-07-10net: add set_promisc function to enable/disable Promiscuous modeTim Harvey1-0/+2
Enabling promiscuous mode can be useful for DSA switches where each port has its own MAC address. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-02-16net: Introduce DSA class for Ethernet switchesClaudiu Manoil1-0/+6
DSA stands for Distributed Switch Architecture and it covers switches that are connected to the CPU through an Ethernet link and generally use frame tags to pass information about the source/destination ports to/from CPU. Front panel ports are presented as regular ethernet devices in U-Boot and they are expected to support the typical networking commands. DSA switches may be cascaded, DSA class code does not currently support this. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass1-1/+1
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-19net: add a define for the number of packets received as batchPatrick Wildt1-0/+3
With a define for the magic number of packets received as batch we can make sure that the EFI network stack caches the same amount of packets. Signed-off-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-10net: Expose some errors generated in net_initSean Anderson1-1/+1
net_init does not always succeed, and there is no existing mechanism to discover errors. This patch allows callers of net_init (such as net_init) to handle errors. The root issue is that eth_get_dev can fail, but net_init_loop doesn't expose that. The ideal way to fix eth_get_dev would be to return an error with ERR_PTR, but there are a lot of callers, and all of them just check if it's NULL. Another approach would be to change the signature to something like int eth_get_dev(struct udevice **pdev) but that would require rewriting all of the many callers. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30net: add a generic udp protocolPhilippe Reynes1-1/+1
This commit adds a generic udp protocol framework in the network loop. So protocol based on udp may be implemented without modifying the network loop (for example custom wait magic packet). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-12net: move random_port() to dnsBaruch Siach1-3/+0
The random_port() routine is not used anywhere else. Make it local to dns.c to reduce code clutter, and shrink generated code a little. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass1-2/+2
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass1-3/+6
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18arm: Don't include common.h in header filesSimon Glass1-1/+5
It is bad practice to include common.h in other header files since it can bring in any number of superfluous definitions. It implies that some C files don't include it and thus may be missing CONFIG options that are set up by that file. The C files should include these themselves. Update some header files in arch/arm to drop this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-03-09phy: Add support for the NC-SI protocolSamuel Mendoza-Jonas1-0/+1
This introduces support for the NC-SI protocol, modelled as a phy driver for other ethernet drivers to consume. NC-SI (Network Controller Sideband Interface) is a protocol to manage a sideband connection to a proper network interface, for example a BMC (Baseboard Management Controller) sharing the NIC of the host system. Probing and configuration occurs by communicating with the "remote" NIC via NC-SI control frames (Ethernet header 0x88f8). This implementation is roughly based on the upstream Linux implementation[0], with a reduced feature set and an emphasis on getting a link up as fast as possible rather than probing the full possible topology of the bus. The current phy model relies on the network being "up", sending NC-SI command frames via net_send_packet() and receiving them from the net_loop() loop (added in a following patch). The ncsi-pkt.h header[1] is copied from the Linux kernel for consistent field definitions. [0]: https://github.com/torvalds/linux/tree/master/net/ncsi [1]: https://github.com/torvalds/linux/blob/master/net/ncsi/ncsi-pkt.h Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-01-17common: Move reset_phy() to net.hSimon Glass1-0/+8
This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move do_tftpb() to net.hSimon Glass1-0/+11
This function belongs in the network header file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-09net: Improve documentation for string_to_ip()Joe Hershberger1-3/+4
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: Always build the string_to_enetaddr() helperJoe Hershberger1-14/+13
Part of the env cleanup moved this out of the environment code and into the net code. However, this helper is sometimes needed even when the net stack isn't included. Move the helper to lib/net_utils.c like it's similarly-purposed string_to_ip(). Also rename the moved function to similar naming. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Ondrej Jirman <megous@megous.com>
2019-12-02common: Move env_get_ip() to net.hSimon Glass1-1/+20
This function relates to networking, so move it out of the common.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-02common: Move random-number functions into their own headerSimon Glass1-0/+1
Create a new rand.h header file and move functions into it, to reduce the size of common.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-09-04net: make net_random_ethaddr() more randomMichael Walle1-1/+1
The net_random_ethaddr() tries to get some entropy from different startup times of a board. The seed is initialized with get_timer() which has only a granularity of milliseconds. We can do better if we use get_ticks() which returns the raw timer ticks. Using this we have a higher chance of getting different values at startup. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: net: Move eth_parse_enetaddr() to net.c/hSimon Glass1-0/+11
This function fits better with the network subsystem, so move it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set() to env.hSimon Glass1-0/+1
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-18net: unaligned copying of unsigned longHeinrich Schuchardt1-2/+2
The inline functions net_read_u32() and net_copy_u32() have been created to copy unaligned u32. But this is not obvious to the compiler. GCC 9.1 introduces a check -Werror=address-of-packed-member which leads to a build error on Travis CI: net/bootp.c: In function ‘dhcp_send_request_packet’: net/bootp.c:1011:27: error: taking address of packed member of ‘struct bootp_hdr’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 1011 | net_copy_u32(&bp->bp_id, &bp_offer->bp_id); Change the type of the function parameters to void * to avoid the build error. Reported-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12net: Add priv_pdata to eth_pdataFaiz Abbas1-0/+2
Add a priv member for eth_pdata for platform specific platform data. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-01-24net: remove CONFIG_MCAST_TFTPChris Packham1-13/+1
No mainline board enables CONFIG_MCAST_TFTP and there have been compilation issues with the code for some time. Additionally, it has a potential buffer underrun issue (reported as a side note in CVE-2018-18439). Remove the multicast TFTP code but keep the driver API for the future addition of IPv6. Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24net: move ether_crc to tsec driverChris Packham1-1/+0
ether_crc was added to the core net code in commit 53a5c424bf86 ("multicast tftp: RFC2090") so that other drivers could use it. However the only current user of it is tsec.c so move it there. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10net: Consolidate UDP header functionsDuncan Hare1-1/+5
Make it possible to add TCP versions of the same, while reusing IP portions. This patch should not change any behavior. Signed-off-by: Duncan Hare <DH@Synoia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10net: Don't overwrite waiting packets with asynchronous repliesJoe Hershberger1-0/+8
Peter originally sent a fix, but it breaks a number of other things. This addresses the original reported issue in a different way. That report was: > U-Boot has 1 common buffer to send Ethernet frames, pointed to by > net_tx_packet. When sending to an IP address without knowing the MAC > address, U-Boot makes an ARP request (using the arp_tx_packet buffer) > to find out the MAC address of the IP addressr. When a matching ARP > reply is received, U-Boot continues sending the frame stored in the > net_tx_packet buffer. > > However, in the mean time, if U-Boot needs to send out any network > packets (e.g. replying ping packets or ARP requests for its own IP > address etc.), it will use the net_tx_packet buffer to prepare the > new packet. Thus this buffer is no longer the original packet meant > to be transmitted after the ARP reply. The original packet will be > lost. This instead uses the ARP tx buffer to send async replies in the case where we are actively waiting for an ARP reply. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Tran Tien Dat <peter.trantiendat@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10net: Add an accessor to know if waiting for ARPJoe Hershberger1-0/+1
This single-sources the state of the ARP. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10net.h: Include linux/if_ether.h to avoid duplicationBin Meng1-0/+1
There are plenty of existing drivers that have macros like ETH_ALEN defined in their own source files. Now that we imported the kernel's if_ether.h to U-Boot we can reduce some duplication. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-08net: Increase ethernet name string size to 20 charsPankaj Bansal1-1/+1
The 16 char ethernet name size is inadequate to hold the name of ethernet name "DPMAC17@rgmii-id", which is a valid name in LX2160AQDS/LX2160ARDB. Therefore, increase the name string size to 20 chars. Reported-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Ioana Ciocoi Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26net: Consolidate the parsing of bootfileJoe Hershberger1-0/+11
The same basic parsing was implemented in tftp and nfs, so add a helper function to do the work once. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26net: When checking prerequisites, consider boot_file_nameJoe Hershberger1-0/+3
For net_boot_common, we allow the serverip to be specified as part of the boot file name. For net commands that require serverip, include that source as a valid specification of serverip. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-07-02net: Prefer command line argumentsAlexander Graf1-0/+2
We can call commands like dhcp and bootp without arguments or with explicit command line arguments that really should tell the code where to look for files instead. Unfortunately, the current code simply overwrites command line arguments in the dhcp case with dhcp values. This patch allows the code to preserve the command line values if they were set on the command line. That way the semantics are slightly more intuitive. The reason this patch does that by introducing a new variable is that we can not rely on net_boot_file_name[0] being unset, as today it's completely legal to call "dhcp" and afterwards run "tftp" and expect the latter to repeat the same query as before. I would prefer not to break that behavior in case anyone relies on it. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-02net: Add new wol command - Wake on LANLothar Felten1-1/+2
Add a new command 'wol': Wait for an incoming Wake-on-LAN packet or time out if no WoL packed is received. If the WoL packet contains a password, it is saved in the environment variable 'wolpassword' using the etherwake format (dot or colon separated decimals). Intended use case: a networked device should boot an alternate image. It's attached to a network on a client site, modifying the DHCP server configuration or setup of a tftp server is not allowed. After power on the device waits a few seconds for a WoL packet. If a packet is received, the device boots the alternate image. Otherwise it boots the default image. This method is a simple way to interact with a system via network even if only the MAC address is known. Tools to send WoL packets are available on all common platforms. Some Ethernet drivers seem to pad the incoming packet. The additional padding bytes might be recognized as Wake-on-LAN password bytes. By default enabled in pengwyn_defconfig. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30net: fastboot: Merge AOSP UDP fastbootAlex Kiernan1-1/+1
Merge UDP fastboot support from AOSP: https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Alex Deymo <deymo@google.com> Signed-off-by: Jocelyn Bohr <bohr@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-10SPDX: Convert a few files that were missed beforeTom Rini1-1/+1
As part of the main conversion a few files were missed. These files had additional whitespace after the '*' and before the SPDX tag and my previous regex was too strict. This time I did a grep for all SPDX tags and then filtered out anything that matched the correct styles. Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style") Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 14:07:15 +0000