summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)AuthorFilesLines
2020-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini5-7/+9
Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a, ls1088a platforms: - lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes
2020-01-25configs: mt8518: set global variables for fastbootmingming lee1-1/+5
set common fastboot variables for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-24lx2160: Correct default environment variableMeenakshi Aggarwal3-5/+7
Create separate "boot_scripts" and "boot_script_hdr" environment variable for LX2160A RDB and QDS board. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24include/configs: ls1012afrwy: adjust kernel_addr_rBiwen Li1-1/+1
The linux kernel Image is growing quite quickly, if kernel Image size grow beyond 36 MB then kernel Image at load address 0x81000000 overlaps with the reserved memory region at 0x83400000. Adjust kernel load address(kernel_addr_r) from 0x81000000 to 0x96000000 to avoid kernel Image overlapping with reserved memory region. This change fixes the below U-Boot error while booting uncompressed kernel Image through booti command, ERROR: reserving fdt memory region failed (addr=83400000 size=c00000) Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24include/configs: ls1012ardb: adjust kernel_addr_rBiwen Li1-1/+1
The linux kernel Image is growing quite quickly, if kernel Image size grow beyond 36 MB then kernel Image at load address 0x81000000 overlaps with the reserved memory region at 0x83400000. Adjust kernel load address(kernel_addr_r) from 0x81000000 to 0x96000000 to avoid kernel Image overlapping with reserved memory region. This change fixes the below U-Boot error while booting uncompressed kernel Image through booti command, ERROR: reserving fdt memory region failed (addr=83400000 size=c00000) Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-23qemu-arm: set CONFIG_SYS_BOOTM_LEN to SZ_64MDhananjay Phadke1-0/+2
FIT image contents can be larger than default bootm limit 8M with initrd. Raise limit to 64MB which is commonly used elsewhere. Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-23arm/km: remove unmaintained board kmsuv31Holger Brunck1-8/+0
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23arm/km: remove unmaintained board SUGP1Holger Brunck1-7/+2
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23arm/km: add support for SUSE2Holger Brunck1-0/+8
This board is similar to SUV31, but the FPGA is reset concept is quite different. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23KM/kmp204x: qrio and i2c deblock code moved to commonHolger Brunck1-0/+4
This patch moves the qrio and i2c deblocking code to keymile/common as it will also be used by the upcoming CENT2 board. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-23removing fdt_high from default set of variables for, dragonboard410c configMatthias Schoepfer1-1/+0
When using fitImage in AARCH64, the fdt is only 4 byte aligned. According to linux kernel -> Documentation/arm64/booting.txt, the fdt *must* be 8 byte aligned. Therefore, it is somewhat random, if you build a kernel that the fdt is 4 or 8 byte aligned. Removing fdt_high (or changing it to a valid 8 byte aligned address) solves this issue. Signed-off-by: Matthias Schoepfer <matthias.schoepfer@ithinx.io> CC: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2020-01-23bcm968360bg: add initial supportPhilippe Reynes1-0/+40
This add the initial support of the broadcom reference board bcm968360bg with a bcm68360 SoC. This board has 512 MB of RAM, 256 MB of flash (nand), 2 USB port, 1 UART, and 4 ethernet ports. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-22board: Add new Samsung "stemmy" board based on ST-Ericsson U8500Stephan Gerhold1-0/+29
The ST-Ericsson U8500 SoC has been used in mass-production for some Android smartphones released around 2012. In particular, Samsung has released more than 5 different smartphones based on U8500, e.g. - Samsung Galaxy S III mini (GT-I8190) "golden" - Samsung Galaxy S Advance (GT-I9070) "janice" - Samsung Galaxy Xcover 2 (GT-S7710) "skomer" and a few others. Mainline Linux has great support for the Ux500 SoC, so these smartphones can also run Linux mainline quite well. Unfortunately, the original Samsung bootloader used on these devices has limitations that prevent booting Linux mainline directly. It keeps the L2 cache enabled, which causes Linux to crash very early, shortly after decompressing the kernel. Using U-Boot allows to circumvent these limitations. We can let the Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache before booting into Linux. U-Boot has several other advantages - it supports device-trees directly and we are no longer limited to flashing Android boot images through Samsung's proprietary download mode. The Samsung "stemmy" board covers all Samsung devices based on U8500. Add minimal support for "stemmy". For now only UART is supported but this will be extended later. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-21Merge tag 'u-boot-imx-20200121' of ↵Tom Rini3-9/+116
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-20Merge tag '2020-01-20-ti-2020.04' of ↵Tom Rini4-7/+42
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
2020-01-20ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas1-0/+116
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Enable SPL SDP by defaultMarek Vasut1-2/+0
Enable SPL SDP fallback boot option in default build. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2-2/+0
Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-01-20configs: am65x_evm: Enable USB keyboard as second stdinVignesh Raghavendra1-0/+1
Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add DFU related env variablesVignesh Raghavendra1-1/+9
Add env variables that set up dfu_alt_info for MMC/EMMC/OSPI. This is required to allow update of firmware on these media. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: ti: Factor out call to 'args_mmc' into MMC common environmentAndrew F. Davis1-1/+0
Both 'loadfit' and 'mmcloados' start with a call to 'args_mmc' so this can be factored out to before eithers only call site. This also allows us to remove that call from 'loadfit', which should not have been calling it anyway as that command should not be MMC specific. Without the call to 'args_mmc' the command 'loadfit' becomes just a call to 'run_fit' so remove the indirection and call 'run_fit' directly, this removes the need for 'loadfit' command (which was misnamed anyway). Drop it. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm.h: Sync J721e environment configuration with AM65xAndrew F. Davis1-3/+9
Some of the environment configuration in AM65x is not available in J721e due to additions on one but not the other. These two platforms are similar enough these common definitions should be factored out to a common area, prepare for this by synchronizing them. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: am57xx: env: Fix DFU variablesSam Protsenko1-1/+1
Commit 8502fe84a4fc ("configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU") implements incorrect ifdef logic, which leads to DFU variables absence in non-SPL environment. Fix that in order to bring back DFU variables, by reflecting the logic in include/configs/dra7xx_evm.h. Fixes: 8502fe84a4fc ("configs: am57xx_evm: define CONFIG_SPL_LOAD_F...") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: beagleboneai: add initial supportCaleb Robey1-1/+0
These are necessities for beaglebone ai boot. There is the addition of CONFIG_SUPPORT_EMMC_CONFIG to the Kconfig file. This is present upstream but not in 19.01 yet. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm: Add configs for environment in eMMCFaiz Abbas1-0/+6
Add config to save and read back environment from eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm_a72: Add Support for GPT partitionsFaiz Abbas1-0/+6
Introduce a default GPT partition table for eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20environment: ti: Add DFU environment variables k3_dfu.hVignesh Raghavendra1-0/+10
Setup env variables for updating firmwares on eMMC/OSPI/MMC via DFU Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-17ARM: stm32: Fill in missing loadaddrMarek Vasut1-2/+3
Since CONFIG_LOADADDR is not set, the default value of $loadaddr variable is not set in the environment either. Set the default load address to 32 MiB from the start of DRAM (same value than kernel_addr_r). Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17stm32mp1: configs: Make all boot devices in distro boot conditionalMarek Vasut1-6/+28
Not all systems have all the boot devices enabled, e.g. not all systems have MTD devices and thus do not enable UBI. Make all the boot devices in the distro bootcmd conditional to avoid failures. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-16mx7ulp: Move SoC base address to a common fileFabio Estevam1-4/+0
SoC base addresses should better go into a common SoC file instead of repeating the definition in each board file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-16mx7ulp_evk: Remove unneeded SDHC definitionsFabio Estevam1-3/+0
As we use the driver model for ESDHC there is no need for defining CONFIG_SYS_FSL_USDHC_NUM and CONFIG_SYS_FSL_ESDHC_ADDR, so simply remove them. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-16Merge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini2-2/+0
- Cleanup of fsl_esdhc driver together with arch/defconfig change - Add quirk for APP_CMD retry
2020-01-16Merge tag 'xilinx-for-v2020.04' of ↵Tom Rini3-5/+14
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
2020-01-16Add support for MT7622 reference boardSam Shih1-0/+46
This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16ARM: MediaTek: add basic support for MT8512 boardsmingming lee1-0/+60
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16powerpc/mpc85xx: drop eSDHC periperhal clock codeYangbo Lu2-2/+0
The below patch added eSDHC periperhal clock code initially. 2d9ca2c mmc: fsl_esdhc: Add peripheral clock support The purpose was to fix up device tree properties "peripheral-frequency" so that linux could get the periperhal clock by it. However the implementation on both u-boot and linux was only for a Freescale SDK release. The linux part implementation had never been upstreamed. These code should not have been exist on u-boot mainline. Let's remove the powerpc part changes but keep the changes in fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized to support SD UHS and eMMC HS200/HS400 speed modes for current Layerscape ARM platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti1-0/+46
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pico-imx7d: Convert to DM_ETHJoris Offouga1-11/+0
Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14imx: add imx8x based deneb boardAnatolij Gustschin1-0/+19
Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14imx: add imx8x capricorn giedi boardAnatolij Gustschin4-0/+424
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14arm64: zynqmp: Move PANIC to KconfigMichal Simek1-1/+0
Convert another option Kconfig. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add support for u-boot.itb generation with ATFMichal Simek1-1/+5
Follow i.MX, Sunxi, RISC-V and Rockchip to generate u-boot.itb which includes U-Boot proper, ATF and DTBs in FIT format. ZynqMP supports FIT for quite a long time but with using out of tree solution. The patch is filling this gap. Tested on zcu102, zcu104 and zcu100/Ultra96. zcu100/Ultra96 v2.2 ATF build by: make DEBUG=0 ZYNQMP_CONSOLE=cadence1 RESET_TO_BL31=1 PLAT=zynqmp bl31 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14ARM: zynq: Add jtag distro boot supportT Karthik Reddy1-0/+9
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14board: xilinx: Add support for user configurable boot script offsetT Karthik Reddy3-3/+0
Currently "script_offset_f" env variable is hardcoded, this variable specifies from which offset of the flash boot.scr should be read/write. As flashes are of different sizes having a fixed offset makes it difficult to load other images into the flash which may overwrite the boot script or cannot utilize the full memory. This current fix creates a new config "CONFIG_BOOT_SCRIPT_OFFSET" which holds the offset address, overwrites the "script_offset_f" variable. Also removed existing variable with default values, as the default values are held by CONFIG_BOOT_SCRIPT_OFFSET Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-10arm/km: remove board KMCOGE3UNHolger Brunck1-9/+1
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10m68k: Drop CONFIG_MCFPIT supportTom Rini11-11/+0
All platforms currently use the "MCFTMR" DMA timer rather than the PIT timer, so drop the MCFPIT code. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Cc: Wolfgang Wegner <w.wegner@astro-kom.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Angelo Dureghello <angelo@sysam.it>
2020-01-10configs: purge unneeded fec definesAngelo Durgehello16-104/+17
Remove unneeded fec-related defines after fec moved as dm. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xxTom Rini7-11/+0
- A small PR with MC8309 fixes from Rasmus.
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini1-0/+165
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini3-189/+217
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:23:27 +0000