summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-07-26xilinx: Define kernel_comp_addr_r,kernel_comp_size env variablesRaju Kumar Pothuraju2-0/+4
Add kernel_comp_addr_r, kernel_comp_size env variables for zynqmp and versal to be able to use the compressed kernel Image(.gz,.bz2,.lzma,.lzo) using booti command. Signed-off-by: Raju Kumar Pothuraju <raju.kumar-pothuraju@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26arm64: versal: Drop default definitions of CONFIG_SYS_PBSIZEMichal Simek1-2/+0
It is default value which had been converted by commit 432e39806805 ("include/configs: drop default definitions of CONFIG_SYS_PBSIZE"). That's why also remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26xilinx: zynqmp: increase CONFIG_SYS_SPL_MALLOC_SIZE to 16MBRicardo Salveti1-1/+1
commit 03f1f78a9b44 ("spl: fit: Prefer a malloc()'d buffer for loading images")' changed the way buffer allocation worked for SPL to a more flexible method. For xilinx zynqmp the 1MB buffer is not necessarily enough when dealing with complex fit images (e.g. containing FPGA/TF-A/OP-TEE/U-Boot proper), which can easily reach up to 10MB, so increase the default CONFIG_SYS_SPL_MALLOC_SIZE size to 16MB to cover more advanced scenarios. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-23board: dragonboard410c: Fix PHYS_SDRAM_1_SIZEStephan Gerhold1-2/+2
The DragonBoard 410c has proprietary firmware from Qualcomm that reserves 8 MiB of memory for tz/smem/hyp/rmtfs/rfsa from 0x86000000 to 0x86800000. I'm not aware of any ATF (ARM Trusted Firmware) port for DB410c that would reserve 30 MiB of memory at the end of RAM. I suspect the comment might have been copied from hikey.h which has a very similar comment (and which actually does have an ATF port). Reducing the memory size just prevents U-Boot from using the end of the RAM, not the reserved region inbetween. Therefore we might as well display the correct DRAM size (1 GiB) instead of strange 986 MiB. Fixes: 626f048bbc14 ("board: Add Qualcomm Dragonboard 410C support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-23board: dragonboard410c: Load U-Boot directly without LKStephan Gerhold1-0/+3
At the moment the U-Boot port for the DragonBoard 410c is designed to be loaded as an Android boot image after Qualcomm's Little Kernel (LK) bootloader. This is simple to set up but LK is redundant in this case, since everything done by LK can be also done directly by U-Boot. Dropping LK entirely has at least the following advantages: - Easier installation/board code (no need for Android boot images) - (Slightly) faster boot - Boot directly in 64-bit without a round trip to 32-bit for LK So far this was not possible yet because of unsolved problems: 1. Signing tool: The firmware expects a "signed" ELF image with extra (Qualcomm-specific) ELF headers, usually used for secure boot. The DragonBoard 410c does not have secure boot by default but the extra ELF headers are still required. 2. PSCI bug: There seems to be a bug in the PSCI implementation (part of the TrustZone/tz firmware) that causes all other CPU cores to be started in 32-bit mode if LK is missing in the boot chain. This causes Linux to hang early during boot. There is a solution for both problems now: 1. qtestsign (https://github.com/msm8916-mainline/qtestsign) can be used as a "signing" tool for U-Boot and other firmware. 2. A workaround for the "PSCI bug" is to execute the TZ syscall when entering U-Boot. That way PSCI is made aware of the 64-bit switch and starts all other CPU cores in 64-bit mode as well. Simplify the dragonboard410c board by removing all the extra code that is only used to build an Android boot image that can be loaded by LK. This allows dropping the custom linker script, special image magic, as well as most of the special build/installation instructions. CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot and the appended DTB combined. The resulting u-boot.elf can then be passed to the "signing" tool (e.g. qtestsign). The PSCI workaround is placed in the "boot0" hook that is enabled with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows compatibility with custom firmware that enters U-Boot in EL2 or EL3, e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub). As a first step these changes apply only to DragonBoard410c. Similar changes could likely also work for the DragonBoard 820c. Note that removing LK wouldn't be possible that easily without a lot of work already done three years ago by Ramon Fried. A lot of missing initialization, pinctrl etc was already added back then even though it was not strictly needed yet. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-23configs: synquacer: Remove mtdparts settings and update DFU settingMasami Hiramatsu1-1/+1
Since MTD partitions are based on the devicetree name, remove unneeded mtdparts settings and update DFU setting. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-23net: remove CONFIG_NET_MULTI (again)Michal Simek4-4/+0
CONFIG_NET_MULTI has been removed long time ago by commit 795428fc679f ("net: remove CONFIG_NET_MULTI") but 4 boards were added later which wasn't found. The patch is removing this reference from 4 boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-07-23arm: vexpress64: juno: Enable distro_bootcmd functionalityAndre Przywara1-24/+34
The ARM Juno boards can be used as somewhat decent machines to run off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of DRAM. With stable DTs in the board's NOR flash this would work really nicely, however the default boot command is to fetch a kernel and an initrd from the on-board NOR flash, which sounds somewhat embedded. Include the config_distro_bootcmd.h header and define the available devices (starting with USB, to catch USB installer sticks) to make distributions and UEFI work out of the box. The NOR flash kernel functionality is still preserved as the last resort, should all other methods fail. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-20configs: ls2080ardb.h: Update mc size in envPriyanka Jain1-6/+6
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls2080aqds.h: Update mc size in envPriyanka Jain1-4/+4
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1088ardb.h: Update mc size in envPriyanka Jain1-12/+12
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1088aqds.h: Update mc size in envPriyanka Jain1-16/+16
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-19Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini3-15/+9
- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony) - Zyxel NSA310S NAS: Convert to Driver Model (Tony) - Turris_omnia: Add `u-boot-env` NOR partition (Marek) - Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek) - Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)
2021-07-19Merge tag 'ti-v2021.10-rc1' of ↵Tom Rini8-105/+311
https://source.denx.de/u-boot/custodians/u-boot-ti - Enabled distro boot for all TI platforms. - Cleanup for AM335x Guardian Board - PRUSS rproc on AM65 platform. - Add PMIC support for J7200 - Misc fixes for Nokia RX-51 # Conflicts: # arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitionsPali Rohár1-5/+0
U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Add DM SATA and remove IDE configsTony Dinh1-5/+4
Enable DM SATA, removed IDE driver, and add SATA MV driver. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Add DM SATA configsTony Dinh1-5/+5
Enable DM SATA, removed IDE driver, and add SATA MV driver. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-18treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USBTom Rini3-3/+3
As the logic here is only used when we have a USB host controller, test on CONFIG_USB_HOST rather than CONFIG_USB in general. This lets us move towards using CONFIG_USB only as a menu symbol to say that we have some form of USB, and then USB_HOST or USB_GADGET depending on the role that USB plays within the build. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmdTom Rini1-1/+8
Reuse the common logic to allow for BOOT_TARGET_DEVICES to list USB as a possibility if we're building for a platform that will have USB but not if we don't, so that we don't hit the link-time check for trying to have USB boot on a non-USB system. Acked-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18ge_bx50v3: Remove unused USB related definesTom Rini1-11/+0
These USB defines do not change the build as there is no USB support enabled currently. Cc: Ian Ray <ian.ray@ge.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-18m68k: Remove M52277EVB boardTom Rini1-243/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54451EVB boardTom Rini1-242/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54418TWR boardTom Rini1-283/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54455EVB boardTom Rini1-356/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-17Merge tag 'u-boot-imx-20210717' of ↵Tom Rini3-5/+25
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX ---- - mx7ulp : fix WDOG - imx8 : Phytec - USB3 support for i.MX8 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277
2021-07-16configs: stm32mp1: remove splashimage and add fdtoverlay_addr_rPatrick Delaunay1-2/+2
Add the variable used by PXE command for fdtoverlays support since the commit 69076dff2284 ("cmd: pxe: add support for FDT overlays"). Reused the unused "splashimage" address as CONFIG_SPLASH_SOURCE and CONFIG_VIDEO_LOGO are not activated and U-Boot display the "BACKGROUND" image found in extlinux.conf to manage splashscreen on stm32mp1 boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-15Nokia RX-51: Load bootmenu also from uSD cardPali Rohár1-26/+9
By default bootmenu is loaded only from eMMC. After this change U-Boot first tries to load bootmenu from uSD card and if it fails then fallback to eMMC. People want to boot alternative OS from removable uSD without need to modify eMMC content. So this backward compatible change allows it. Part of this change is also optimization of trymmc* macros so they can be used in preboot macro for loading bootmenu. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210618132704.32066-2-pali@kernel.org
2021-07-15Nokia RX-51: Add support for booting kernel in zImage formatPali Rohár1-4/+7
Enable U-Boot bootz command and update env scripts to try loading also zImage file and to try booting via bootz command. Update also lowlevel_init.S code for checking validity of zImage magic to correctly relocate kernel in zImage format. This change allows U-Boot to directly boot Linux kernel without need for converting kernel image into U-Boot uImage format. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210618132704.32066-1-pali@kernel.org
2021-07-15configs: am65x_evm: Switch envboot out for distro_bootcmdTom Rini1-2/+12
Swap out the TI-centric "envboot" logic for the generic distro_bootcmd logic for the bootcmd we run before trying to do something more complex involving additional firmware, etc. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210713141139.15183-1-trini@konsulko.com
2021-07-15arm: omap4: Disable USB_TTY and related optionsTom Rini1-6/+0
The usbtty functionality is not currently used on these two platforms, disable it. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210708014348.4010-1-trini@konsulko.com
2021-07-15configs: j721e_evm: Switch envboot out for distro_bootcmdTom Rini1-2/+22
Swap out the TI-centric "envboot" logic for the generic distro_bootcmd logic for the bootcmd we run before trying to do something more complex involving additional firmware, etc. Cc: Lokesh Vutla <lokeshvutla@ti.com> (maintainer:J721E BOARD) Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701142743.26190-1-trini@konsulko.com
2021-07-15ti: omap5: Switch to generic distro boot for non-Android casesTom Rini1-12/+11
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Note that if we do not find anything here we will continue to try and Android methods and will start by trying fastboot. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701132612.7559-3-trini@konsulko.com
2021-07-15arm: ti: environment: Move <environment/ti/boot.h> in to ↵Tom Rini1-1/+228
<configs/ti_omap5_common.h> This include file is only used by ti_omap5_common.h. Further, the move is towards using the generic distro boot framework and not this set of macros. Start by moving all of the contents in directly to where they are used. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701132612.7559-2-trini@konsulko.com
2021-07-15ti: am43xx_evm: Switch to DISTRO_BOOT onlyTom Rini1-45/+18
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701132612.7559-1-trini@konsulko.com
2021-07-15ti: am335x_evm: Switch to DISTRO_BOOT onlyTom Rini1-17/+1
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210610230147.22475-1-trini@konsulko.com
2021-07-15am335x, guardian: Enable panel driver Himax HX8238DGireesh Hiremath1-0/+11
- Enable lcd controller - Display splash screen Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-16-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: Enable backlightGireesh Hiremath1-0/+1
Enable backlight, set brightness value and dimming frequency Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-13-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: update swi logicGireesh Hiremath1-1/+1
read boot mode gpio and set the swi status Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-12-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: set environment variable autoload to noGireesh Hiremath1-1/+1
autoload: if set to "no" then rarpb, bootp or dhcp commands will just perform a configuration lookup from the BOOTP / DHCP server, but not try to load any image using TFTP Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-8-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: set tftp_load_addr in environmentMoses Christopher1-0/+1
Set tftp_load_addr to 0x82000000 in MEM_LAYOUT_ENV_SETTINGS Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-5-Gireesh.Hiremath@in.bosch.com
2021-07-14board: stemmy: Copy atags for booting downstream/vendor kernelStephan Gerhold1-0/+3
The U-Boot "stemmy" board is mainly intended to simplify booting mainline Linux on various smartphones from Samsung based on ST-Ericsson Ux500. While the mainline kernel is working great, there are still some features missing there. In particular, it is currently not possible to charge the battery when using the mainline kernel. This means that it is still necessary to boot the downstream/vendor kernel from Samsung sometimes to charge the device. That kernel is ancient, still uses board files + ATAGS instead of device trees and relies on a strange very long kernel command line hardcoded in the Samsung bootloader. Actually, since mainline is booted with device trees there is a very simple way to make the old downstream kernel work as well: We can simply take most of the ATAGS passed to U-Boot from the Samsung bootloader and copy them as-is when booting a kernel without device tree. That way the long command line and other needed ATAGS are copied as-is without having to bother with them. The only exception is the ATAG_INITRD - since the initrd is loaded by U-Boot, the atag for that should be generated in U-Boot so it points to the correct address. All other ATAGS are copied as-is and not generated in U-Boot. Also use the chance and provide a serial# for U-Boot by parsing the ATAG_SERIAL that is also passed by the Samsung bootloader. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14board: stemmy: Parse atags to get available memoryStephan Gerhold1-13/+10
At the moment the "stemmy" board attempts to detect the RAM size with a simple memory test (get_ram_size()). Unfortunately, this does not work correctly for devices with 768 MiB RAM (e.g. Samsung Galaxy Ace 2 (GT-I8160), "codina"). Reading/writing memory after the 768 MiB RAM succeeds but actually overwrites some earlier parts of the memory. For U-Boot this does not result in any major problems, but on Linux this will eventually lead to strange crashes because of the memory corruption. Since the "stemmy" U-Boot port is designed to be chainloaded from the original Samsung bootloader, the most reliable way to get the available amount of RAM is to look at the ATAGS passed by the Samsung bootloader. Fortunately, the header used to generate ATAGS in U-Boot (asm/setup.h) can also be easily used to parse them. Also clarify and simplify stemmy.h a bit to make it more clear where some of the magic values in there are actually coming from. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14configs: uniphier: Enable CONFIG_SYS_PCI_64BITKunihiko Hayashi1-0/+2
Enable CONFIG_SYS_PCI_64BIT to allow 64bit access to PCI space. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-07-10board: phytec: phycore_imx8mp: Add fec supportTeresa Remmet1-0/+17
Enable support for the fec ethernet on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10board: phytec: phycore_imx8mp: Change debug UARTTeresa Remmet1-2/+2
With the first redesign the debug UART had changed from UART2 to UART1. As the first hardware revision is considered as alpha and will not be supported in future. The old setup will not be preserved. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10smegw01: Allow booting the Yocto image by defaultFabio Estevam1-3/+3
On the Yocto image there is a single partition and the kernel and dtb are present in the 'boot' directory. Change it accordingly so that the board can boot the Yocto image by default. Use the generic 'load' command instead, which is able to read from an ext4 partition. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-07-10imx: ventana: increase SYS_BOOTM_LENTim Harvey1-0/+3
Increase SYS_BOOM_LEN from the default 16M in imx6_common to 64M. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-08arm: mvebu: a37xx: Enable more baudratesPali Rohár2-4/+14
Extend CONFIG_SYS_BAUDRATE_TABLE and include all standard baudrates and also nonstandard up to the 6 MBaud. U-Boot's A3720 UART driver can use baudrates from 300 Baud to 6 MBaud. This changes all A3720 boards, since all of them include either mvebu_armada-37xx.h or turris_mox.h config file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-07Revert "arm: Remove nsa310s board"Tom Rini1-0/+59
While this platform has not yet been converted, there is active efforts to do so. Keep the platform for now. This reverts commit aa697e6904ba1b3144a46ec642d4695e7c0cdc3e. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove spear600 boards and the rest of SPEAr supportTom Rini3-426/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 10:00:30 +0000