summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2017-10-03fs/btrfs: Fix warning in btrfs_check_super()Tom Rini1-1/+1
We specifically say that the last arg is u32, so use %lu. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02fs: btrfs: Add U-Boot fs handlers.Marek Behún6-0/+263
Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/Kconfig create mode 100644 fs/btrfs/Makefile create mode 100644 fs/btrfs/btrfs.c create mode 100644 include/btrfs.h
2017-10-02fs: btrfs: Add single-device read-only BTRFS implementationMarek Behún12-0/+1841
This adds the proper implementation for the BTRFS filesystem. The implementation currently supports only read-only mode and the filesystem can be only on a single device. Checksums of data chunks is unimplemented. Compression is implemented (ZLIB + LZO). Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/btrfs.h create mode 100644 fs/btrfs/chunk-map.c create mode 100644 fs/btrfs/compression.c create mode 100644 fs/btrfs/ctree.c create mode 100644 fs/btrfs/dev.c create mode 100644 fs/btrfs/dir-item.c create mode 100644 fs/btrfs/extent-io.c create mode 100644 fs/btrfs/hash.c create mode 100644 fs/btrfs/inode.c create mode 100644 fs/btrfs/root.c create mode 100644 fs/btrfs/subvolume.c create mode 100644 fs/btrfs/super.c
2017-10-02fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functionsMarek Behún1-0/+176
BTRFS on disk structures are stored in Little Endian. Add functions to convert this structures to cpu and to disk format. On Little Endian hosts, these functions do nothing. On Big Endian the CALL_MACRO_FROM_EACH from variadic-macro.h is used to define all the members for each structure on which cpu_to_le* or le*_to_cpu is to be called. Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/conv-funcs.h
2017-10-02fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)Marek Behún2-0/+1100
Add btrfs_tree.h and ctree.h from Linux which contains constants and structures for the BTRFS filesystem. Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/btrfs_tree.h create mode 100644 fs/btrfs/ctree.h
2017-10-02fs: Create a common fs_devread for ext4/reiserfs/zfsMarek Behún5-236/+105
The ext4, reiserfs and zfs filesystems all have their own implementation of the same function, *_devread. Generalize this function into fs_devread and put the code into fs/fs_internal.c. Signed-off-by: Marek Behun <marek.behun@nic.cz> [trini: Move fs/fs_internal.o hunk to the end of fs/Makefile as all cases need it] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-22fs/fat: Reduce stack usageTom Rini1-4/+10
We have limited stack in SPL builds. Drop itrblock and move to malloc/free of itr to move this off of the stack. As part of this fix a double-free issue in fat_size(). Signed-off-by: Tom Rini <trini@konsulko.com> --- Rework to use malloc/free as moving this to a global overflows some SH targets.
2017-09-15fs/fat: fix fatbuf leakRob Clark1-7/+16
A new fatbuf was allocated by get_fs_info() (called by fat_itr_root()), but not freed, resulting in eventually running out of memory. Spotted by running 'ls -r' in a large FAT filesystem from Shell.efi. fatbuf is mainly used to cache FAT entry lookups (get_fatent()).. possibly once fat_write.c it can move into the iterator to simplify this. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-15fs/fat: Clean up open-coded sector <-> cluster conversionsRob Clark2-10/+6
Use the clust_to_sect() helper that was introduced earlier, and add an inverse sect_to_clust(), plus update the various spots that open-coded this conversion previously. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fs/fat: fix case for FAT shortnamesRob Clark2-8/+12
Noticed when comparing our output to linux. There are some lcase bits which control whether filename and/or extension should be downcase'd. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fat/fs: move ls to generic implementationRob Clark2-34/+33
Add a generic implementation of 'ls' using opendir/readdir/closedir, and replace fat's custom implementation. Other filesystems should move to the generic implementation after they add opendir/readdir/closedir support. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fat/fs: remove a bunch of dead codeRob Clark2-187/+0
Spotted by chance, when trying to remove file_fat_ls(), I noticed there were some dead users of the API. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fs/fat: implement opendir/readdir/closedirRob Clark1-0/+61
Implement the readdir interface using the directory iterators. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fs: add fs_readdir()Rob Clark1-0/+104
Needed to support efi file protocol. The fallback.efi loader wants to be able to read the contents of the /EFI directory to find an OS to boot. Modelled after POSIX opendir()/readdir()/closedir(). Unlike the other fs APIs, this is stateful (ie. state is held in the FS_DIR "directory stream"), to avoid re-traversing of the directory structure at each step. The directory stream must be released with closedir() when it is no longer needed. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fat/fs: convert to directory iteratorsRob Clark1-646/+76
And drop a whole lot of ugly code! Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15fs/fat: introduce new director iteratorsRob Clark1-3/+353
Untangle directory traversal into a simple iterator, to replace the existing multi-purpose do_fat_read_at() + get_dentfromdir(). Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-15fs/fat: split out helper to init fsdataRob Clark1-30/+43
Want to re-use this in fat dirent iterator in next patch. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-26fs: ext4: Fix journal overrun issue reported by CoverityTom Rini1-2/+2
While &p_jdb[fs->blksz] is a valid expression (it points *one* char sized element past the end of the array, e.g. &p_jdb[fs->blksz + 1] is invalid (according to the C standard (C99/C11)). Changing this to tag = (struct ext3_journal_block_tag *)(p_jdb + ofs); Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Suggested-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reported-by: Coverity (CID: 165117, 165110) Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-08-26fs: fat: fix fatwrite overflow calculationReno Farnesi1-1/+1
The overflow calculation was incorrect. Adding the start block of the partition is not needed because the sectors are already relative to the beginning of the partition. If you attempted to write a file smaller than cur_part_info.start blocks on a full partition the old calculation fails to catch the overflow. This would cause an infinite loop in the determine_fatent function. Old, incorrect calculation: ending sector of new file = start sector + file size (in sectors) last sector = partition start + total sectors on the partition Adding the partition start block number is not needed because sectors are already relative to the start of the partition. New calculation: ending sector of new file = start sector + file size (in sectors) last sector = total sectors on the partition Signed-off-by: Reno Farnesi <nfarnesi4@gmail.com>
2017-08-20fs/fat: Correct blk_dread() return value checkTom Rini1-1/+1
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-16env: Rename getenv/_f() to env_get()Simon Glass1-2/+2
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename common functions related to setenv()Simon Glass2-4/+4
We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename setenv() to env_set()Simon Glass1-2/+2
We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-11Convert CONFIG_CMD_YAFFS2 to KconfigSimon Glass2-0/+9
This converts the following to Kconfig: CONFIG_CMD_YAFFS2 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11fs: use get_nand_dev_by_index()Grygorii Strashko3-5/+18
As part of preparation for nand DM conversion the new API has been introduced to remove direct access to nand_info array. So, use it here instead of accessing to nand_info array directly. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-07-11Kconfig: Add CONFIG_SATA to enable SATASimon Glass1-1/+1
At present CONFIG_CMD_SATA enables the 'sata' command which also brings in SATA support. Some boards may wish to enable SATA without the command. Add a separate CONFIG to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada1-1/+1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-06fs: usbifs: Fix warning in ubifsSiva Durga Prasad Paladugu1-1/+1
This patch fixes the below warning by typecasting it properly fs/ubifs/ubifs.c: In function 'ubifs_load': fs/ubifs/ubifs.c:942:29: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] err = ubifs_read(filename, (void *)addr, 0, size, &actread); Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-06-03fs: fat: add kbuild configuration supportSekhar Nori1-0/+24
Add Kconfig symbols for various configurations supported by FAT filesystem support code. CONFIG_SUPPORT_VFAT has been left out since its force enabled in include/fat.h and probably should get removed at some point. Signed-off-by: Sekhar Nori <nsekhar@ti.com> [trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22fs: Kconfig: Add a separate option for FS_JFFS2Simon Glass2-1/+8
Rather than using CMD_JFFS2 for both the filesystem and its command, we should have a separate option for each. This allows us to enable JFFS2 support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22Kconfig: Add a CONFIG_IDE optionSimon Glass1-1/+1
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30fs: Kconfig: Add a separate option for FS_CRAMFSSimon Glass1-0/+7
Rather than using CMD_CRAMFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CRAMFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply FS_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30fs: Kconfig: Add a separate config for FS_CBFSSimon Glass3-1/+11
Rather than using CMD_CBFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CBFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply FS_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27ext4: Fix comparision of unsigned expression with < 0Lokesh Vutla2-4/+3
In file ext4fs.c funtion ext4fs_read_file() compares an unsigned expression with < 0 like below lbaint_t blknr; blknr = read_allocated_block(&(node->inode), i); if (blknr < 0) return -1; blknr is of type ulong/uint64_t. read_allocated_block() returns long int. So comparing blknr with < 0 will always be false. Instead declare blknr as long int. Similarly ext4/dev.c does a similar comparison. Drop the redundant comparison. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18yaffs2: remove redundant conditionxypron.glpk@gmx.de1-1/+1
If !parent, the changed line is not reached. So there is no need to check the value again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18cramfs: basic symlink supportTyler Hall1-12/+50
Handle symlinks to files in the current directory. Other cases could be handled with additional code, but this is a start. Add explicit errors for absolute paths and links found in the middle of a path (directories). Other cases like '..' or '.' will result with the file not being found as when those path components are explicitly provided. Add a helper to decompress a null-terminated link name which is shared with cramfs_list_inode. Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
2017-04-18cramfs: block pointers are 32 bitsTyler Hall1-1/+1
Using a variably-sized type is incorrect here since we're reading a fixed file format. Fixes cramfs on 64-bit platforms. Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
2017-02-12flash: complete CONFIG_SYS_NO_FLASH move with renamingMasahiro Yamada1-1/+1
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-28fs/fat: Fix unaligned __u16 reads for FAT12 accessStefan Brüns1-3/+4
Doing unaligned reads is not supported on all architectures, use byte sized reads of the little endian buffer. Rename off16 to off8, as it reflects the buffer offset in byte granularity (offset is in entry, i.e. 12 bit, granularity). Fix a regression introduced in 8d48c92b45aea91e2a2be90f2ed93677e85526f1 Reported-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Tested-by: Oleksandr Tymoshenko <gonzo@bluezbox.com>
2017-01-28cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPTPatrick Delaunay1-1/+1
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-27fs/ext4: Initialize group descriptor size for revision level 0 filesystemsStefan Brüns1-0/+1
genext2fs creates revision level 0 filesystems, which are not readable by u-boot due to the initialized group descriptor size field. f798b1dda1c5de818b806189e523d1b75db7e72d Reported-by: Kever Yang <kever.yang@rock-chips.com> Reported-by: FrostyBytes@protonmail.com Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2016-12-27fs/fat: simplify get_fatent for FAT12Stefan Brüns1-29/+5
Instead of shuffling bits from two adjacent 16 bit words, use one 16 bit word with the appropriate byte offset in the buffer. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-12-27fs/fat: merge readwrite get_fatent_value() with readonly get_fatent()Stefan Brüns2-116/+27
get_fatent_value(...) flushes changed FAT entries to disk when fetching the next FAT blocks, in every other aspect it is identical to get_fatent(...). Provide a stub implementation for flush_dirty_fat_buffer if CONFIG_FAT_WRITE is not set. Calling flush_dirty_fat_buffer during read only operation is fine as it checks if any buffers needs flushing. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-12-27fs/fat: Avoid corruption of sectors following the FATStefan Brüns2-10/+13
The FAT is read/flushed in segments of 6 (FATBUFBLOCKS) disk sectors. The last segment may be less than 6 sectors, cap the length. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-12-27fat: fatwrite: fix the command for FAT12Philipp Skadorov1-8/+53
The u-boot command fatwrite empties FAT clusters from the beginning till the end of the file. Specifically for FAT12 it fails to detect the end of the file and goes beyond the file bounds thus corrupting the file system. Additionally, FAT entry chaining-up into a file is not implemented for FAT12. The users normally workaround this by re-formatting the partition as FAT16/FAT32, like here: https://github.com/FEDEVEL/openrex-uboot-v2015.10/issues/1 The patch fixes the bounds of a file and FAT12 entries chaining into a file, including EOF markup. Signed-off-by: Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
2016-12-02sandboxfs: Fix resource leakTom Rini1-2/+3
Now that we free resources in sandbox_fs_ls Coverity is letting us know that in some cases we might leak. So in case of error we should still let os_dirent_free free anything that was allocated. Fixes: 86167089b71c ("sandbox/fs: Free memory allocated by os_dirent_ls") Reported-by: Coverity (CID: 153450) Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28fs/fat/fatwrite: Local variable as buffer to store dir_slot entriesTien Fong Chee1-1/+2
fill_dir_slot use get_contents_vfatname_block as a temporary buffer for constructing a list of dir_slot entries. To save the memory and providing correct type of memory for above usage, a local buffer with accurate size declaration is introduced. The local array size 640 is used because for long file name entry, each entry use 32 bytes, one entry can store up to 13 characters. The maximum number of entry possible is 20. So, total size is 32*20=640bytes. Signed-off-by: Genevieve Chan <ccheauya@altera.com> Signed-off-by: Tien Fong Chee <tfchee@altera.com>
2016-11-21ext4: Allow reading files with non-zero offset, clamp read lenStefan Brüns1-11/+6
Support was already implemented, but not hooked up. This fixes several fails in the test cases. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21ext4: Fix handling of sparse filesStefan Brüns1-16/+15
A sparse file may have regions not mapped by any extents, at the start or at the end of the file, or anywhere between, thus not finding a matching extent region is never an error. Found by python filesystem tests. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-10-31Fix spelling of "multiple".Vagrant Cascadian1-1/+1
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 09:46:39 +0000