summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-11-12pengwyn: nand and ethernet fixesVincent BENOIT1-2/+43
-> Add National instrument ethernet transceiver configuration used (DP83848) -> Change cpsw slave phy address -> modify nand configuration to use the correct ECC and correct nand features
2015-11-12block: ahci: Remove dead codeFabio Estevam1-36/+0
CONFIG_AHCI_SETFEATURES_XFER is not selected by any user, so delete the dead code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12i2c: Fix pca953x endianess issueDirk Eibach1-1/+3
By reading 2 consecutive bytes from i2c to an u16 value we have an endianess issue. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12i2c: soft_i2c: Fix bus indizesDirk Eibach1-10/+10
Since busses are sorted in alphabetical order, introducing more than nine busses led to unexpected behaviour. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12hrcon: Add fan controllersDirk Eibach1-0/+28
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12hrcon: Add support for the DH variantDirk Eibach1-0/+28
hrcon DH(dual head) has two video outputs per FPGA. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12i2c: ihs_i2c: Fix hold_bus controlDirk Eibach1-1/+1
Bus has to be held for repeated start regardless of read/write access. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de>
2015-11-12i2c: ihs_i2c: Use macro bestpracticesDirk Eibach1-10/+14
Reinhard Pfau complained that macros in ihs_i2c do not follow best practices. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de>
2015-11-12i2c: ihs_i2c: Dual channel supportDirk Eibach1-13/+63
Support two i2c masters per FPGA. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de>
2015-11-12driver: net: Fix pointer conversion warnings for xilinx_zynqmp_epPrabhakar Kushwaha1-8/+8
Fix below warnings happening for xilinx_zynqmp_ep_defconfig drivers/net/zynq_gem.c: In function ‘zynq_gem_init’: drivers/net/zynq_gem.c:330:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ((u32)(priv->rxbuffers) + ^ In file included from drivers/net/zynq_gem.c:19:0: drivers/net/zynq_gem.c:336:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] writel((u32)priv->rx_bd, &regs->rxqbase); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ drivers/net/zynq_gem.c: In function ‘zynq_gem_send’: drivers/net/zynq_gem.c:399:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] writel((u32)priv->tx_bd, &regs->txqbase); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ drivers/net/zynq_gem.c:404:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] priv->tx_bd->addr = (u32)ptr; ^ drivers/net/zynq_gem.c:409:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] addr = (u32) ptr; ^ drivers/net/zynq_gem.c:414:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] addr = (u32)priv->rxbuffers; ^ drivers/net/zynq_gem.c: In function ‘zynq_gem_recv’: drivers/net/zynq_gem.c:454:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] net_process_received_packet((u8 *)addr, frame_len); ^ drivers/net/zynq_gem.c: In function ‘zynq_gem_initialize’: drivers/net/zynq_gem.c:533:35: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); ^ drivers/net/zynq_gem.c:533:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12driver: usb: Fix pointer conversion warnings for hikeyPrabhakar Kushwaha1-4/+5
Fix below compilation warings happening for hikey_defconfig drivers/usb/eth/smsc95xx.c:698:56: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); ^ include/common.h:109:26: note: in definition of macro ‘debug_cond’ printf(pr_fmt(fmt), ##args); \ ^ drivers/usb/eth/smsc95xx.c:698:2: note: in expansion of macro ‘debug’ debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); ^ drivers/usb/eth/smsc95xx.c:718:2: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ [-Wformat=] debug("Tx: len = %u, actual = %u, err = %d\n", ^ drivers/usb/eth/smsc95xx.c: In function ‘smsc95xx_recv’: drivers/usb/eth/smsc95xx.c:802:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cur_buf_align = (int)buf_ptr - (int)recv_buf; ^ drivers/usb/eth/smsc95xx.c:802:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cur_buf_align = (int)buf_ptr - (int)recv_buf; Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12driver: dwmmc: Fix pointer conversion warnings for hikeyPrabhakar Kushwaha2-4/+4
Fix below compilation warings happening for hikey_defconfig drivers/mmc/dw_mmc.c: In function ‘dwmci_set_idma_desc’: drivers/mmc/dw_mmc.c:43:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac); ^ drivers/mmc/dw_mmc.c: In function ‘dwmci_prepare_data’: drivers/mmc/dw_mmc.c:61:35: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac); ^ drivers/mmc/dw_mmc.c:73:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] (u32)bounce_buffer + (i * PAGE_SIZE)); ^ CC drivers/mmc/hi6220_dw_mmc.o drivers/mmc/hi6220_dw_mmc.c: In function ‘hi6220_dwmci_add_port’: drivers/mmc/hi6220_dw_mmc.c:51:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] host->ioaddr = (void *)regbase; Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12pci: fix checking PCI_REGION_MEM in pci_hose_phys_to_bus()Cheng Gu1-2/+2
When converting between PCI bus and phys addresses, a two pass search was introduced with preference to non-PCI_REGION_SYS_MEMORY regions. See commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf. However, since PCI_REGION_MEM is defined as 0, the if statement was always asserted true: ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) This patch uses PCI_REGION_TYPE bit to check if the region is PCI_REGION_MEM: ((flags & PCI_REGION_TYPE) == PCI_REGION_MEM) Signed-off-by: Cheng Gu <chenggu@marvell.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-12fastboot: Implement NAND backendMaxime Ripard1-0/+11
So far the fastboot code was only supporting MMC-backed devices for its flashing operations (flash and erase). Add a storage backend for NAND-backed devices. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-12fastboot: Implement flashing session counterMaxime Ripard1-1/+13
The fastboot flash command that writes an image to a partition works in several steps: 1 - Retrieve the maximum size the device can download through the "max-download-size" variable 2 - Retrieve the partition type through the "partition-type:%s" variable, that indicates whether or not the partition needs to be erased (even though the fastboot client has minimal support for that) 3a - If the image is smaller than what the device can handle, send the image and flash it. 3b - If the image is larger than what the device can handle, create a sparse image, and split it in several chunks that would fit. Send the chunk, flash it, repeat until we have no more data to send. However, in the 3b case, the subsequent transfers have no particular identifiers, the protocol just assumes that you would resume the writes where you left it. While doing so works well, it also means that flashing two subsequent images on the same partition (for example because the user made a mistake) would not work withouth flashing another partition or rebooting the board, which is not really intuitive. Since we have always the same pattern, we can however maintain a counter that will be reset every time the client will retrieve max-download-size, and incremented after each buffer will be flashed, that will allow us to tell whether we should simply resume the flashing where we were, or start back at the beginning of the partition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12fastboot: Move fastboot response functions to fastboot coreMaxime Ripard1-8/+19
The functions and a few define to generate a fastboot message to be sent back to the host were so far duplicated among the users. Move them all to a common place. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12mtd: uboot: Add meaningful error messageMaxime Ripard1-1/+1
The current error message in get_part if CONFIG_MTDPARTS is disabled is "offset is not a number" which is confusing and doesn't help at all. Change that for something that might give a hint on what's going on. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12net: altera_tse: add mSG-DMA supportThomas Chou2-0/+191
The Modular Scatter-Gather DMA core is a new DMA core to work with the Altera Triple-Speed Ethernet MegaCore. It replaces the legacy Scatter-Gather Direct Memory Access (SG-DMA) controller core. Please find details on the "Embedded Peripherals IP User Guide" of Altera. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-12net: altera_tse: add priv ops to prepare msgdma supportThomas Chou2-25/+81
Add priv ops to prepare msgdma support. These ops are dma type specific. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-12net: altera_tse: wait sgdma in altera_tse_recvThomas Chou1-1/+1
Move the sgdma wait from free_pkt to recv. This is the proper place to wait recv sgdma done. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-12net: altera_tse: factor out stop mac funcThomas Chou1-15/+21
Factor out the stop mac function to prepare msgdma support. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-12mtd: add altera quadspi driverThomas Chou3-0/+283
Add Altera Generic Quad SPI Controller support. The controller converts SPI NOR flash to parallel flash interface. So it is not like other SPI flash, but rather like CFI flash. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-12cfi_flash: convert to driver modelThomas Chou2-0/+89
Convert cfi flash to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-12dm: implement a MTD uclassThomas Chou3-0/+34
Implement a Memory Technology Device (MTD) uclass. It should include most flash drivers in the future. Though no uclass ops are defined yet, the MTD ops could be used. The NAND flash driver is based on MTD. The CFI flash and SPI flash support MTD, too. It should make sense to convert them to MTD uclass. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-10Various Makefiles: Add SPDX-License-Identifier tagsTom Rini11-3/+34
After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-06Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini7-220/+122
2015-11-06net: altera_tse: get numbers of fdt address and size cellsThomas Chou1-6/+8
Get numbers of fdt address and size cells in altera_tse_probe(), thereby remove the assumption of one address cell and one size cell. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-06net: altera_tse: use BIT macroThomas Chou1-15/+15
Replace numerical bit shift with BIT macro in altera_tse :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-06net: altera_tse: remove the useless parenthesisThomas Chou1-15/+15
Remove the useless parenthesis. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-06net: altera_tse: fix packed and aligned attributeThomas Chou1-1/+1
Fix packed and aligned attribute warnings. WARNING: __packed is preferred over __attribute__((packed)) #14: FILE: drivers/net/altera_tse.h:14: +#define __packed_1_ __attribute__ ((packed, aligned(1))) WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) #14: FILE: drivers/net/altera_tse.h:14: +#define __packed_1_ __attribute__ ((packed, aligned(1))) Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-06net: altera_tse: use data type u32 for regs and descThomas Chou2-60/+60
Use data type u32/u16/u8 for regs and desc, as it is more portable. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-06net: altera_tse: remove unused macro and regs defThomas Chou1-101/+3
Remove unused macro and regs def. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-06altera_uart: Adjust the declaration of debug_uart_init()Thomas Chou1-1/+1
Follow commit 97b059730218 ("debug_uart: Adjust the declaration of debug_uart_init()") Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06altera_jtag_uart: Adjust the declaration of debug_uart_init()Thomas Chou1-1/+1
Follow commit 97b059730218 ("debug_uart: Adjust the declaration of debug_uart_init()") Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06spi: altera_spi: minor clean upThomas Chou1-2/+2
- Remove the penultimate comma in of_match ids Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06misc: altera_sysid: minor clean upThomas Chou1-2/+2
- Remove the penultimate comma in of_match ids Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06timer: altera_timer: minor clean upThomas Chou1-7/+7
- Moved macro definitions to top - Remove the penultimate comma in of_match ids Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06timer: altera_timer: use BIT macroThomas Chou1-3/+3
Replace numerical bit shift with BIT macro in altera_timer :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06serial: altera_uart: minor clean upThomas Chou1-11/+10
- Moved macro definitions to top - Re-arrange header includes ascending order - Remove unused header linux/compiler.h - Remove the penultimate comma in of_match ids Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06serial: altera_uart: use BIT macroThomas Chou1-3/+3
Replace numerical bit shift with BIT macro in altera_uart :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06serial: altera_jtag_uart: minor clean upThomas Chou1-14/+13
- Moved macro definitions to top - Give spaces around the '>>' in ALTERA_JTAG_WSPACE() - Re-arrange header includes ascending order - Remove unused header linux/compiler.h - Remove the penultimate comma in of_match ids Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06serial: altera_jtag_uart: use BIT macroThomas Chou1-3/+3
Replace numerical bit shift with BIT macro in altera_jtag_uart :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05sf: Add SPI NOR protection mechanismFabio Estevam3-2/+34
Many SPI flashes have protection bits (BP2, BP1 and BP0) in the status register that can protect selected regions of the SPI NOR. Take these bits into account when performing erase operations, making sure that the protected areas are skipped. Tested on a mx6qsabresd: => sf probe SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB => sf protect lock 0x3f0000 0x10000 => sf erase 0x3f0000 0x10000 offset 0x3f0000 is protected and cannot be erased SF: 65536 bytes @ 0x3f0000 Erased: ERROR => sf protect unlock 0x3f0000 0x10000 => sf erase 0x3f0000 0x10000 SF: 65536 bytes @ 0x3f0000 Erased: OK Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> [re-worked to fit the lock common to dm and non-dm] Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05sf: Add SPI protection mechanism from the kernelFabio Estevam2-0/+173
Add the SPI NOR protection mechanism from the kernel. This code is based on the work from Brian Norris <computersforpeace@gmail.com> Here is the commit details: "mtd: spi-nor: refactor block protection functions" (sha1: 62593cf40b23b523b9fc9334ca61ba6c595ebb09) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-11-05compat: Remove is_power_of_2() definitionFabio Estevam2-2/+2
Use the is_power_of_2() definition from log2.h to align with the kernel implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini5-6/+5
2015-11-05Merge git://git.denx.de/u-boot-samsungTom Rini12-7/+862
2015-11-05Merge git://git.denx.de/u-boot-usbTom Rini8-18/+22
2015-11-05Merge git://git.denx.de/u-boot-socfpgaTom Rini2-13/+21
2015-11-05video: Drop DEV_EXT_VIDEO flagBin Meng1-1/+0
DEV_EXT_VIDEO does not have any actual meaning, hence drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 19:21:51 +0000