summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2017-05-18usb: lpc32xx: add i2c DM supportLiam Beguin1-18/+46
Add DM support for i2c functions. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to KconfigTom Rini1-0/+8
Follow the exiting logic for the i.MX options when migrating this option. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15Kconfig: USB: Migrate existing USB_EHCI_xxx optionsTom Rini1-2/+2
The following options are migrated over fully now: - USB_EHCI_ATMEL - USB_EHCI_MARVELL - USB_EHCI_MX6 - USB_EHCI_MX7 - USB_EHCI_MSM - USB_EHCI_ZYNQ - USB_EHCI_GENERIC This also requires fixing the depends on USB_EHCI_MARVELL as it's used by Orion5X and Kirkwood as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to KconfigTom Rini1-0/+1
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCDTom Rini2-7/+1
In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15omap4: Drop redundant CONFIG_OMAP4430 symbolTom Rini3-4/+4
While there are a few different OMAP4 SoCs, today we always set CONFIG_OMAP4430 and CONFIG_OMAP44XX. Convert the few test of CONFIG_OMAP4430 to CONFIG_OMAP44XX. Cc: Marek Vasut <marex@denx.de> Cc: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-15omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when neededTom Rini2-2/+2
We make use of CONFIG_OMAP3_EVM today to know when to do a specific tweak in MUSB. This can be tested on via CONFIG_TARGET_OMAP3_EVM instead, so switch there so we can drop the now unused symbol CONFIG_OMAP3_EVM. In investigating what to do about the symbol usage we see that the cairo board defines the same function, but never called it (as it does not define CONFIG_OMAP3_EVM) and was just returning anyhow, so drop that function from that board. Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-11usb: gadget: avoid variable name clipping in cb_getvarnicolas.le.bayon@st.com1-2/+10
Hi, A kind reminder to look at this patch (already reviewed by Marek and acked by Lukasz), and if possible to put it in the next pull list, or the one after is timing is too short. Thanks in advance for your time Best Regards Nicolas -----Original Message----- From: Nicolas LE BAYON Sent: mardi 25 avril 2017 10:18 To: Nicolas LE BAYON <nicolas.le.bayon@st.com>; u-boot@lists.denx.de; lukma@denx.de; marex@denx.de Cc: nlebayon@gmail.com; Patrice CHOTARD <patrice.chotard@st.com>; Jean-philippe ROMAIN <jean-philippe.romain@st.com> Subject: [U-Boot][PATCH v7] usb: gadget: avoid variable name clipping in cb_getvar From: Nicolas Le Bayon <nicolas.le.bayon@st.com> Instead of using a fixed-size array to store variable name, preferring a dynamic allocation treats correctly all variable name lengths. Variable names are growing through releases and features. By this way, name clipping is prevented. Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2017-05-09net: smsc95xx: Correct free_pkt() implementationSimon Glass1-2/+2
On further review this returns the wrong packet length from the driver. It may not be noticed since protocols will take care of it. Fix it by subtracting the header length from the packet length returned. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-08arm: am57xx: cl-som-am57x: invoke clock API to enable/disable clocksUri Mashiach1-0/+2
Invoke enable_usb_clocks during board_usb_init and disable_usb_clocks during board_usb_exit to enable and disable clocks respectively. Modifications: * Enable USB clocks in the OMAP version of the function board_usb_init. * Disable USB clocks in the OMAP version of the function board_usb_cleanup. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-08usb: host: xhci-omap: fix double weak board_usb_init functionsUri Mashiach1-2/+15
A weak version of the function board_usb_init is implemented in: common/usb.c drivers/usb/host/xhci-omap.c To fix the double implementations: * Convert the board_usb_init function in drivers/usb/host/xhci-omap.c normal (not weak). * The function board_usb_init in drivers/usb/host/xhci-omap.c calls to the weak function omap_xhci_board_usb_init. * Rename board version of the function board_usb_init to omap_xhci_board_usb_init. Done only for boards that defines CONFIG_USB_XHCI_OMAP. To achieve the same flexibility with the function board_usb_cleanup: * Add a normal (not weak) implementation of the function board_usb_cleanup in drivers/usb/host/xhci-omap.c * The function board_usb_cleanup in drivers/usb/host/xhci-omap.c calls to the weak function omap_xhci_board_usb_cleanup. * Rename board version of the function board_usb_cleanup to omap_xhci_board_usb_cleanup. Done only for boards that defines CONFIG_USB_XHCI_OMAP. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2017-05-08arm: usb: dra7xx: xHCI registers based on USB port indexUri Mashiach1-0/+9
Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2017-04-25ehci-ppc4xx: Prepare for usage of readl()/writel() accessorsAlexey Brodkin1-0/+1
We used to have opencoded ehci_readl()/writel() which required no external functions to be called. Now with attempt to switch to generic readl()/writel() accessors we see a missing declaration of those accessors in ehci-ppc4xx. Something like that happens if applied http://patchwork.ozlabs.org/patch/726714/: ---------------->8--------------- CC drivers/usb/host/ehci-ppc4xx.o drivers/usb/host/ehci-ppc4xx.c: In function 'ehci_hcd_init': drivers/usb/host/ehci-ppc4xx.c:23:3: warning: implicit declaration of function 'readl' [-Wimplicit-function-declaration] HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); ^ ---------------->8--------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@konsulko.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-25usb: musb: avoid out of bound access in udc_setup_epHeinrich Schuchardt1-2/+2
For id = 15 an out of bound access occurs in udc_setup_ep(). Increase the size of epinfo[] from 30 to 32 to encompass ids 0..15. The problem was highlighted by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-04-25musb: properly detect failed initialization of controllerHeinrich Schuchardt1-1/+1
We want to check the result of musb_init_controller and not the address were the result is stored. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-04-17armv7: ls1021a: Drop macro CONFIG_LS102XAYork Sun1-1/+1
Use CONFIG_ARCH_LS1021A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-14usb: dwc2: invalidate the dcache before starting the DMAEddie Cai1-6/+13
We should invalidate the dcache before starting the DMA. In case there are any dirty lines from the DMA buffer in the cache, subsequent cache-line replacements may corrupt the buffer in memory while the DMA is still going on. Cache-line replacement can happen if the CPU tries to bring some other memory locations into the cache while the DMA is going on. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-04-14usb: dwc3: gadget: make cache-maintenance on event buffers more robustPhilipp Tomsich2-2/+5
Merely using dma_alloc_coherent does not ensure that there is no stale data left in the caches for the allocated DMA buffer (i.e. that the affected cacheline may still be dirty). The original code was doing the following (on AArch64, which translates a 'flush' into a 'clean + invalidate'): # during initialisation: 1. allocate buffers via memalign => buffers may still be modified (cached, dirty) # during interrupt processing 2. clean + invalidate buffers => may commit stale data from a modified cacheline 3. read from buffers This could lead to garbage info being written to buffers before reading them during even-processing. To make the event processing more robust, we use the following sequence for the cache-maintenance: # during initialisation: 1. allocate buffers via memalign 2. clean + invalidate buffers (we only need the 'invalidate' part, but dwc3_flush_cache() always performs a 'clean + invalidate') # during interrupt processing 3. read the buffers (we know these lines are not cached, due to the previous invalidation and no other code touching them in-between) 4. clean + invalidate buffers => writes back any modification we may have made during event processing and ensures that the lines are not in the cache the next time we enter interrupt processing Note that with the original sequence, we observe reproducible (depending on the cache state: i.e. running dhcp/usb start before will upset caches to get us around this) issues in the event processing (a fatal synchronous abort in dwc3_gadget_uboot_handle_interrupt on the first time interrupt handling is invoked) when running USB mass storage emulation on our RK3399-Q7 with data-caches on. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-04-14usb: dwc3: ensure consistent types for dwc3_flush_cachePhilipp Tomsich3-11/+11
The dwc3_flush_cache() call was declared and used inconsistently: * The declaration assumed 'int' for addresses (a potential issue when running in a LP64 memory model). * The invocation cast the address to 'long'. This change ensures that both the declaration and usage of this function consistently uses 'uintptr_t' for correct behaviour even when the allocated buffers (to be flushed) reside outside of the lower 32bits of memory. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-04-14usb: gadget: g_dnl: don't set iProduct nor iSerialNumberFelipe Balbi1-2/+2
Both these numbers are calculated in runtime and dynamically assigned to the device descriptor during bind(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-14usb: gadget: g_dnl: only set iSerialNumber if we have a serial#Felipe Balbi1-5/+7
We don't want to claim that we support a serial number string and later return nothing. Because of that, if g_dnl_serial is an empty string, let's skip setting iSerialNumber to a valid number. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-14usb: gadget: g_dnl: hold maximum string descriptorFelipe Balbi1-1/+1
A USB String descriptor can be up to 255 characters long and it's not NULL terminated according to the USB spec. This means our MAX_STRING_SERIAL should be 256 (to cope with NULL terminator). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-14usb: dwc2: add support for external vbus supplyKever Yang1-5/+38
Some board do not use the dwc2 internal VBUS_DRV signal, but use a gpio pin to enable the 5.0V VBUS power, add interface to enable the power in dwc2 driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-06Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini1-1/+1
trini: Disable CONFIG_SPL_USE_ARCH_MEMSET on orangepi_2 Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05Blackfin: RemoveTom Rini10-572/+4
The architecture is currently unmaintained, remove. Cc: Benjamin Matthews <mben12@gmail.com> Cc: Chong Huang <chuang@ucrobotics.com> Cc: Dimitar Penev <dpn@switchfin.org> Cc: Haitao Zhang <hzhang@ucrobotics.com> Cc: I-SYST Micromodule <support@i-syst.com> Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Strubel <strubel@section5.ch> Cc: Peter Meerwald <devel@bct-electronic.com> Cc: Sonic Zhang <sonic.adi@gmail.com> Cc: Valentin Yakovenkov <yakovenkov@niistt.ru> Cc: Wojtek Skulski <info@skutek.com> Cc: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05sunxi: prepare for sharing MACH_SUN8I_H3 config symbolAndre Przywara1-1/+1
The Allwinner H5 is very close to the H3 SoC, but has ARMv8 cores. To allow sharing the clocks, GPIO and driver code easily, create an architecture agnostic MACH_SUNXI_H3_H5 Kconfig symbol. Rename the existing symbol to MACH_SUNXI_H3_H5 where code is shared and let it be selected by a new shared Kconfig option. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04dm: core: Add flags parameter to device_remove()Stefan Roese2-3/+3
This patch adds the flags parameter to device_remove() and changes all calls to this function to provide the default value of DM_REMOVE_NORMAL for "normal" device removal. This is in preparation for the driver specific pre-OS (e.g. DMA cancelling) remove support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-23mvebu: usb: xhci: Add VBUS regulator supply to the host driverKonstantin Porotchkin2-1/+13
The USB device should linked to VBUS regulator through "vbus-supply" DTS property. This patch adds handling for "vbus-supply" property inside the USB device entry for turning on the VBUS regulator upon the host adapter probe. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-26usb: gadget: f_dfu: set serial number if serial# is validFelipe Balbi1-0/+5
With this patch, USB Command Verifier is happy with our DFU implementation on Chapter 9 tests. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-02-26usb: gadget: g_dnl: fix g_dnl_set_serialnumber()Felipe Balbi1-2/+1
instead of only copying if strlen(s) is less than 32 characters, let's just copy at most 31 characters regardless of the size of serial#. This will guarantee that we always have a serial number if serial# environment variable is set to anything. Note that without a proper serial number, USB Command Verifier fails our test of Device Descriptor since we will claim to have a serial number without really providing one when requested. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-02-26usb: gadget: f_dfu: write req->actual bytesFelipe Balbi1-1/+1
If last packet is short, we shouldn't write req->length bytes to non-volatile media, we should write only what's available to us, which is held in req->actual. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-02-26usb: gadget: dfu: add result for handle_getstatus()Patrick Delaunay2-22/+13
harmonize result with other handle_XXX() functions: return int for size remove the define RET_STAT_LEN : no more necessary Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-02-26usb: gadget: dfu: correct size for USB_REQ_DFU_GETSTATE resultPatrick Delaunay1-11/+11
return the correct size for DFU_GETSTATE result (1 byte in DFU 1.1 spec) to avoid issue in USB protocol and the variable "value" is propagated to req->lenght as all the in the other request with answer - DFU_GETSTATUS - DFU_DNLOAD - DFU_UPLOAD Then the buffer is correctly treated in USB driver NB: it was the only request witch directly change "req->actual" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-02-26usb: gadget: dfu: add functional descriptor in descriptor setPatrick Delaunay1-1/+9
The "DFU descriptor set" must contain the "DFU functional descriptor" but it is missing today in U-Boot code (cf: DFU spec 1.1, chapter 4.2 DFU Mode Descriptor Set) This patch only allocate buffer and copy DFU functional descriptor after interfaces. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-02-26usb: dwc3: gadget: Remove unused header inclusionVincent Tinelli1-1/+0
Remove sys_proto.h inclusion which is not used by the driver. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass13-23/+25
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-17drivers: usb: gadget: ether: Fix compiler warningLokesh Vutla1-0/+2
Latest gcc 6.2 compiler is throwing the below warning for am335x_baltos_defconfig drivers/usb/gadget/ether.c:501:17: warning: 'mdlm_detail_desc' defined but not used [-Wunused-const-variable=] static const u8 mdlm_detail_desc[] = { Guard mdlm_detail_desc with CONFIG_USB_ETH_SUBSET to avoid the warning Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-01-17usb: ehci-mx6: handle vbus-supplyPeng Fan1-3/+27
Drop board_ehci_power when dm usb used and switch to use regulator api to handle vbus. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
2017-01-17usb: ehci-mx6: implement ofdata_to_platdataPeng Fan1-0/+75
Implement ofdata_to_platdata to set the type to host or device. - Check "dr-mode" property. - If there is no "dr-mode", check phy_ctrl for i.MX6 and phy_status for i.MX7 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
2017-01-17drivers: usb: Add USB_XHCI_ZYNQMP to KconfigMichal Simek1-0/+6
Move symbol to Kconfig to cleanup configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-17usb: dwc2-otg: remove unused variableMasahiro Yamada1-2/+0
GCC 6.1 complains about this. drivers/usb/gadget/dwc2_udc_otg.c:72:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] static const char driver_desc[] = DRIVER_DESC; ^~~~~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-09drivers: usb: gadget: ether/rndis: convert driver to adopt device driver modelMugunthan V N4-15/+174
Adopt usb ether gadget and rndis driver to adopt driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-12-27Update Maintainer and Author's email addressAjay Bhargav2-2/+2
I am not longer using my old email address "ajay.bhargav@einfochips.com". For U-Boot development email address is now updated to contact@8051projects.net Signed-off-by: Ajay Bhargav <contact@8051projects.net>
2016-12-08net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffersStefan Roese1-6/+16
Testing on theadorable (Armada XP) has shown, that using this driver results in many cache misaligned warning, such as: CACHE: Misaligned operation at range [7fabd8fc, 7fabd900] This patch now uses the ALLOC_CACHE_ALIGN_BUFFER() macro to allocate the buffers on a cache aligned boundary. This fixes all warnings seen on the Armada XP platform. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ted Chen <tedchen@realtek.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-06usb: xhci-pci: Add DM supportStefan Roese1-0/+81
This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms. Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: George McCollister <george.mccollister@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-05fsl/usb: enable the errata-a005697 for ls1012ajerry.huang@nxp.com1-0/+4
Enable the errata-a005697 for ls1012a Signed-off-by: Changming Huang <jerry.huang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-04usb: gadget: remove unused shortname variableAndre Przywara1-1/+0
The shortname variable isn't referenced anywhere in the code, so just remove it. Pointed out by a GCC 6.2 default warning option. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-12-04usb: eth: r8152_fw: fix indentationAndre Przywara1-4/+4
Apparently the indentation is wrong here, fix this to avoid compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-03Merge branch 'master' of git://www.denx.de/git/u-boot-dmTom Rini6-64/+391
2016-12-03ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XXNishanth Menon1-2/+2
CONFIG_AM57XX is just an unnecessary macro that is redundant given So, remove the same instead of spreading through out the u-boot source code and getting in the way to maintain common code for DRA7x family. Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 01:47:36 +0000