summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2017-05-15Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini3-22/+0
2017-05-15omap24xx_i2c.c: Drop references to CONFIG_OMAP243XTom Rini1-3/+3
We have nothing defining CONFIG_OMAP243X since we dropped the omap243x platforms, drop these tests. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-05-15i2c: Drop CONFIG_SYS_I2C_BOARD_LATE_INITSimon Glass2-18/+0
This option is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-15i2c: mxc_i2c: Drop use of CONFIG_I2C_HARDSimon Glass1-4/+0
Drop use of this long-deprecated option. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-09ARM: OMAP: I2C: Support New read, write and probe functions for OMAP3Adam Ford1-0/+1
New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4 (4430/60/70), OMAP5 (5430) and AM335X (3359) were added in 960187ffa125( "ARM: OMAP: I2C: New read, write and probe functions") but not tested on OMAP3. This patch will allow the updated drivers using device tree and DM_I2C to operate on OMAP3. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-09drivers: i2c: davinci_i2c: Update davinci i2c driver to driver modelCooper Jr., Franklin1-2/+90
Convert davinci i2c driver to driver model. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-05-09i2c: davinci: Split functions into two parts for future DM supportCooper Jr., Franklin1-75/+110
The i2c driver will be converted to support device model. In preparation for that change split the various functions into two parts. This will allow device model specific driver to reuse the majority of the code from the non device model implementation. Also rename the probe function to probe_chip to better reflect its purpose. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-05-08Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini1-0/+9
2017-05-08aspeed: Add I2C Drivermaxims@google.com4-0/+499
Add Device Model based I2C driver for ast2500/ast2400 SoCs. The driver is very limited, it only supports master mode and synchronous byte-by-byte reads/writes, no DMA or Pool Buffers. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2017-04-28sunxi: i2c: Add support for DM I2CJernej Skrabec1-0/+9
This commit adds support for DM I2C on sunxi platform. It can coexist with old style sunxi I2C driver, because it is still used in SPL and by some SoCs. Because sunxi platform doesn't yet support DM clk, reset and pinctrl driver, workaround is needed to enable clocks and set resets and pinctrls. This is done by calling i2c_init_board() in board_init(). This means that CONFIG_I2Cx_ENABLE options needs to be correctly set in order to use needed I2C controller. Commit is based on the previous patch made by Philipp Tomsich Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-18Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini1-1/+1
2017-04-17armv7: ls1021a: Drop macro CONFIG_LS102XAYork Sun1-1/+1
Use CONFIG_ARCH_LS1021A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-15rockchip: i2c: Enable i2c for rk3399eric.gao@rock-chips.com1-0/+1
To enable mipi display, we need to enable pmic rk808 first for lcd3v3 power,which use i2c0 to communicate with soc. So enable i2c0. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-05i2c: Drop unused i2c_soft...() functionsSimon Glass1-44/+0
These are not used in U-Boot. Manual relocation fixup is used by blackfin but that is being removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05Blackfin: RemoveTom Rini2-180/+0
The architecture is currently unmaintained, remove. Cc: Benjamin Matthews <mben12@gmail.com> Cc: Chong Huang <chuang@ucrobotics.com> Cc: Dimitar Penev <dpn@switchfin.org> Cc: Haitao Zhang <hzhang@ucrobotics.com> Cc: I-SYST Micromodule <support@i-syst.com> Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Strubel <strubel@section5.ch> Cc: Peter Meerwald <devel@bct-electronic.com> Cc: Sonic Zhang <sonic.adi@gmail.com> Cc: Valentin Yakovenkov <yakovenkov@niistt.ru> Cc: Wojtek Skulski <info@skutek.com> Cc: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-04rockchip: i2c: Add compatibles for Rockchip Cortex-A9 socsHeiko Stübner1-0/+2
The Cortex-A9 socs rk3066 and rk3188 share the IP but have their own compatible values, so add them to make the i2c on these platforms accessible. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-28i2c: Set default I2C bus numberLukasz Majewski1-0/+14
This patch allows using i2c commands (e.g. "i2c probe", "i2c md", etc) without the need to first select the bus number with e.g. "i2c dev 0". This is the "i2c" command behavior similar to the one from pre DM, where by default bus 0 was immediately accessible. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-03-28i2c: ti: Update method to calculate psc, sscl and ssch I2C parametersLukasz Majewski1-25/+41
This patch updates the way in which psc, sscl and ssch I2C parameters are calculated to be in sync with v4.9 Linux kernel SHA1: 69973b830859bc6529a7a0468ba0d80ee5117826 in the ./drivers/i2c/busses/i2c-omap.c The previous method was causing several issues: - The internal I2C frequency (after prescaler) was far above recommended one (7 - 12 MHz [*]) - the current approach brings better noise suppression (as stated in Linux commit: SHA1: 84bf2c868f3ca996e5bb) - The values calculated (psc, sscl and ssch) were far from optimal, which caused on the test platform (AM57xx) the I2C0 SCL signal low time (Fast Mode) of ~1.0us (the standard requires > 1.3 us). [*] for AM57xx TRM SPRUHZ6G, Table 24,7 "HS I2C Register Values for Maximum I2C Bit Rates in I2C F/S, I2C HS Modes" Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-03-28i2c: ti: Update SCLH and SCLL to be in sync with v4.9 Linux kernelLukasz Majewski1-5/+5
v4.9 Linux release: SHA1: 69973b830859bc6529a7a0468ba0d80ee5117826 in the ./drivers/i2c/busses/i2c-omap.c recommends to use SCLH=5 and SCLL=7 values. This patch sets them to default. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-03-28i2c: lpc32xx: Force consistent bus numberingLiam Beguin1-0/+1
Normally, this would probably be done by adding devicetree aliases to the main dtsi file for the lpc32xx and using bus->req_seq instead. Since we want to have consistent i2c numbering, we cannot force the bus->req_seq because. If for instance we have 3 buses numbered from 0 to 2 with i2c0 enabled, i2c1 disabled and i2c2 enabled; i2c2 can be selected using 'i2c dev 1' and 'i2c dev 2' commands because a bus can be probed using req_seq or seq interchangeably. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28i2c: lpc32xx: Move definitions to header fileLiam Beguin1-27/+1
Since the lpc32xx i2c driver does not yet support the devicetree bindings, this structure is also needed by the board file as the hardware description is done there. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28i2c: lpc32xx: Remove note for DM conversationSylvain Lemieux1-3/+0
Removed note in the LPC32xx I2C driver for DM conversation. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28i2c: lpc32xx: Add DM for lpc32xx I2CLiam Beguin1-0/+90
Adding DM specific wrapper functions and definitions. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28i2c: lpc32xx: Factor out i2c_adapter parameterLiam Beguin1-54/+53
This is part of the prep work for the migration to the driver model. It will enable the driver to support DM and non-DM configurations using the same functions. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28i2c: lpc32xx: Prepare compatibility functionsLiam Beguin1-9/+38
This is part of the prep work for the migration to the driver model. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28i2c: lpc32xx: Rename probe functionLiam Beguin1-3/+3
This is part of the prep work for the migration to the driver model. What used to be the probe function is now called probe_chip. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-17i2c: lpi2c: add lpi2c driver for i.MX7ULPPeng Fan3-0/+469
Add lpi2c driver for i.MX7ULP. Need to enable the two options to use this driver: CONFIG_DM_I2C=y CONFIG_SYS_I2C_IMX_LPI2C=y Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-02-17fsl_i2c.c: Fix warning on gcc-6.xTom Rini1-2/+2
With gcc-6.x we see: drivers/i2c/fsl_i2c.c:86:3: warning: ‘fsl_i2c_speed_map’ defined but not used [-Wunused-const-variable=] The easy way to fix this is that since we only use fsl_i2c_speed_map at all on __M68K__ move the existing guards around slightly. Reported-by: Thomas Schaefer <Thomas.Schaefer@kontron.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-02-13i2c: sandbox: remove code snippet from Kconfig helpMasahiro Yamada1-22/+1
With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings: $ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' Drop the Device Tree fragment from the help. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass13-24/+25
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-29i2c: uniphier-f: use readl_poll_timeout() to poll registersMasahiro Yamada1-24/+10
The readl_poll_timeout() is a useful helper to poll registers and error out if the condition is not met. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29i2c: uniphier(-f): remove unneeded #include <dm/root.h>Masahiro Yamada2-2/+0
This include is unnecessary for low-level drivers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-18Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2-63/+149
2017-01-18Merge git://git.denx.de/u-boot-samsungTom Rini2-1/+12
2017-01-18i2c: i2c-cdns: No need for dedicated probe functionMoritz Fischer1-21/+0
The generic probe code in dm works, so get rid of the leftover cruft. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
2017-01-18i2c: i2c-cdns: Implement workaround for hold quirk of the rev 1.0Moritz Fischer1-30/+89
Revision 1.0 of this IP has a quirk where if during a long read transfer the transfer_size register will go to 0, the master will send a NACK to the slave prematurely. The way to work around this is to reprogram the transfer_size register mid-transfer when the only the receive fifo is known full, i.e. the I2C bus is known non-active. The workaround is based on the implementation in the linux-kernel. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
2017-01-18i2c: i2c-cdns: Reorder timeout loop for interrupt waitingMoritz Fischer1-1/+1
Reorder the timeout loop such that we first check if the condition is already true, and then call udelay() so if the condition is already true, break early. Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
2017-01-18i2c: i2c-cdns: Detect unsupported sequences for rev 1.0Moritz Fischer1-14/+52
Revision 1.0 of this IP has a couple of issues, such as not supporting repeated start conditions for read transfers. So scan through the list of i2c messages for these conditions and report an error if they are attempted. This has been fixed for revision 1.4 of the IP, so only report the error when the IP can really not do it. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
2017-01-18i2c: mux: Allow muxes to work as children of i2c bus without i2c-parentMoritz Fischer1-0/+10
For mux check if the parent is already a device of UCLASS_I2C and if yes just use that. Otherwise see if someone specified an i2c-parent phandle. This mimics the behavior found in the Kernel, as it removes the requirement to explicitly specify a i2c-parent phandle. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Heiko Schocher <hs@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de
2017-01-18i2c: Kconfig: Add SYS_I2C_S3C24X0 entryJaehoon Chung1-0/+5
Adding Kconfig for SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-01-18i2c: s3c24x0: fix the compiler error for exynos4Jaehoon Chung1-1/+7
If CONFIG_SYS_I2C_S3C24X0_SLAVE isn't defined, then complie error should be occurred. This patch is for preventing it. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-01-10i2c: cdns: Add additional compatible string for r1p14 of the IP.Moritz Fischer1-0/+1
Adding additional compatible string for version 1.4 of the IP block. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-20Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini1-2/+2
2016-12-19i2c: mv_i2c.c: Correct address endiannessBradley Bolen1-2/+2
0c0f719ad2f46c8566a56daee37ebdb7c078c3b1 accidentally changed the endianness of the i2c read and write addresses. This was noticable when accessing EEPROMs that use 2 byte addressing as the LSB was being sent first. Signed-off-by: Bradley Bolen <bradleybolen@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2016-12-16i2c: mxc: Make 'no gpio pinctrl state' print as debugJagan Teki1-1/+1
Some I2C bus devicetree nodes, doesn't require to have gpio pinctrl so replace the dev_info to debug so the print never comes on the console and for bus that uses gpio pinctrl anyway have dev_err. Before: ------ U-Boot> i2c dev 1 Setting bus to 1 i2c bus 1 at 0x21a4000, no gpio pinctrl state. After: ------ U-Boot> i2c dev 1 Setting bus to 1 Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-16i2c: mxc: Print hex instead of decimal for bus addressJagan Teki1-1/+1
Better to print the hex value for bus address instead of decimal, for more readbility on bus addressing. Before: ------ U-Boot> i2c dev 1 Setting bus to 1 i2c bus 1 at 35274752, no gpio pinctrl state. After: ------ U-Boot> i2c dev 1 Setting bus to 1 i2c bus 1 at 0x21a4000, no gpio pinctrl state. Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-16i2c: Kconfig: Add SYS_I2C_MXC entryJagan Teki1-0/+8
Added kconfig for SYS_I2C_MXC driver. Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-05dm: i2c: Add a note to I2C drivers which need conversionSimon Glass14-0/+42
Maintainers need to be notified more directly of the need to convert these drivers. Add a note to the top each affected file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05samsung: i2c: Split the high-speed I2C code into a new driverSimon Glass4-545/+591
Now that driver model is used for I2C on all boards, we can split the high-speed code into its own driver. There is virtually no common code, and this significantly reduces confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05samsung: i2c: Drop old code from I2C driverSimon Glass1-583/+2
Now that all boards use DM_I2C we can drop the old code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 11:51:23 +0000