summaryrefslogtreecommitdiff
path: root/drivers/fastboot
AgeCommit message (Collapse)AuthorFilesLines
2023-07-25lib: sparse: allocate FASTBOOT_MAX_BLK_WRITE instead of small numberMattijs Korpershoek1-2/+0
Commit 62649165cb02 ("lib: sparse: Make CHUNK_TYPE_RAW buffer aligned") fixed cache alignment for systems with a D-CACHE. However it introduced some performance regressions [1] on system flashing huge images, such as Android. On AM62x SK EVM, we also observe such performance penalty: Sending sparse 'super' 1/2 (768793 KB) OKAY [ 23.954s] Writing 'super' OKAY [ 75.926s] Sending sparse 'super' 2/2 (629819 KB) OKAY [ 19.641s] Writing 'super' OKAY [ 62.849s] Finished. Total time: 182.474s The reason for this is that we use an arbitrary small buffer (info->blksz * 100) for transferring. Fix it by using a bigger buffer (info->blksz * FASTBOOT_MAX_BLK_WRITE) as suggested in the original's patch review [2]. With this patch, performance impact is mitigated: Sending sparse 'super' 1/2 (768793 KB) OKAY [ 23.912s] Writing 'super' OKAY [ 15.780s] Sending sparse 'super' 2/2 (629819 KB) OKAY [ 19.581s] Writing 'super' OKAY [ 17.192s] Finished. Total time: 76.569s [1] https://lore.kernel.org/r/20221118121323.4009193-1-gary.bisson@boundarydevices.com [2] https://lore.kernel.org/r/all/43e4c17c-4483-ec8e-f843-9b4c5569bd18@seco.com/ Fixes: 62649165cb02 ("lib: sparse: Make CHUNK_TYPE_RAW buffer aligned") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-05-31fastboot: Only call the bootm command if it is enabledSamuel Holland1-1/+1
This fixes an error with trying to link against do_bootm() when CONFIG_CMD_BOOTM is disabled. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-05-05net: share fastboot boot handle logic between transportsDmitrii Merkurev1-0/+32
Introduce reboot, boot and continue commands support to TCP fastboot by moving existing UDP logic into the common module. Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-05net: add fastboot TCP supportDmitrii Merkurev2-1/+14
Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-04drivers: fastboot: zImage flashing is not supported for v3, v4Safae Ouajih1-0/+8
With vendor boot image introduced in version 3 and 4 of boot image header, boot information is located in both boot image and vendor boot image. Flashing zImage is not supported for version 3 and 4 since this requires updating vendor boot image and/or generating a new image. Print an error message when the boot image header version is greater than 2. Signed-off-by: Safae Ouajih <souajih@baylibre.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04android: boot: replace android_image_check_headerSafae Ouajih1-2/+1
With the new vendor boot image introduced in versions 3 and 4 of boot image header, the header check must be done for both boot image and vendor boot image. Thus, replace android_image_check_header() by is_android_boot_image_header() to only refer to boot image header check. Signed-off-by: Safae Ouajih <souajih@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-04-04android: boot: rename andr_img_hdr -> andr_boot_img_hdr_v0Safae Ouajih1-4/+4
Android introduced boot header version 3 or 4. The header structure change with version 3 and 4 to support the new updates such as: - Introducing Vendor boot image: with a vendor ramdisk - Bootconfig feature (v4) Change andr_img_hdr struct name to maintain support for version v0, v1 and v2 while introducing version 3 and 4. Signed-off-by: Safae Ouajih <souajih@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-02-10Correct SPL uses of FASTBOOT_FLASH_NANDSimon Glass2-3/+3
This converts 3 usages of this option to the non-SPL form, since there is no SPL_FASTBOOT_FLASH_NAND defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-02-10Correct SPL uses of FASTBOOT_FLASH_MMCSimon Glass3-5/+5
This converts 5 usages of this option to the non-SPL form, since there is no SPL_FASTBOOT_FLASH_MMC defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-02-09Correct SPL use of FASTBOOT_MMC_USER_SUPPORTSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_FASTBOOT_MMC_USER_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09Correct SPL uses of FASTBOOT_FLASHSimon Glass1-2/+2
This converts 3 usages of this option to the non-SPL form, since there is no SPL_FASTBOOT_FLASH defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-01-11fastboot: Add OEM run commandSean Anderson2-5/+18
This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-01-11fastboot: remove #ifdef CONFIG when it is possiblePatrick Delaunay3-103/+61
Much of the fastboot code predates the introduction of Kconfig and has quite a few #ifdefs in it which is unnecessary now that we can use IS_ENABLED() et al. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3l
2022-08-04Audit <flash.h> inclusionTom Rini3-3/+0
A large number of files include <flash.h> as it used to be how various SPI flash related functions were found, or for other reasons entirely. In order to migrate some further CONFIG symbols to Kconfig we need to not include flash.h in cases where we don't have a NOR flash of some sort enabled. Furthermore, in cases where we are in common code and it doesn't make sense to try and further refactor the code itself in to new files we need to guard this inclusion. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-28fastboot: only look up real partition names when no alias existsMatthias Schiffer1-17/+12
Having U-Boot look up the passed partition name even though an alias exists is unexpected, leading to warning messages (when the alias name doesn't exist as a real partition name) or the use of the wrong partition. Change part_get_info_by_name_or_alias() to consider real partitions names only if no alias of the same name exists, allowing to use aliases to override the configuration for existing partition names. Also change one use of strcpy() to strlcpy(). Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2022-01-28fastboot: fix fastboot_set_reboot_flag()Roman Stratiienko1-1/+1
In case CONFIG_FASTBOOT_FLASH_MMC_DEV == 0, compile-time condition is not met and fastboot_set_reboot_flag() fails. Fixes: a362ce214f03 ("fastboot: Implement generic fastboot_set_reboot_flag") Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt2-3/+3
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-15net: fastboot: make UDP port net: configurableChristian Gmeiner1-0/+7
The fastboot protocol uses per default the UDP port 5554. In some cases it might be needed to change the used port. The fastboot utility provides a way to specifiy an other port number to use already. fastboot -s udp:192.168.1.76:1234 boot fastboot.img Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-10-12fastboot: fix partition name truncation in environment lookupMatthias Schiffer1-2/+2
strlcat() need to be passed the full buffer length. The incorrect call caused truncation of partition names for fastboot_raw_partition_... and fastboot_partition_alias_... env lookup to much less than PART_NAME_LEN. Fixes: 69a752983171 ("fastboot: Fix possible buffer overrun") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek1-1/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-21Fix flashing of eMMC user area with FastbootOleh Kravchenko1-7/+15
'gpt' and 'mmc0' fastboot partitions have been treated as the same device, but it is wrong. Fill disk_partition structure with eMMC user partition info to properly flash data. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Cc: Sean Anderson <sean.anderson@seco.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2021-08-21Fix flash and erase of eMMC Boot2 with FastbootOleh Kravchenko1-2/+2
The current U-Boot version has the next matches for boot partitions: > mmc0boot0 to EMMC_BOOT1 > mmc0boot1 to EMMC_BOOT1 (should be EMMC_BOOT2) This patch fixes a typo for the boot partition number. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass1-1/+1
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-12fastboot: Fix possible buffer overrunSean Anderson1-3/+3
This fixes several uses of strn(cpy|cat) which did not terminate their destinations properly. Fixes de1728ce4c ("fastboot: Allow u-boot-style partitions") Reported-by: Coverity Scan Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-02-26fastboot: add UUU command UCmd and ACmd supportHeiko Schocher2-0/+77
add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-26fastboot: Allow u-boot-style partitionsSean Anderson1-59/+98
This adds support for partitions of the form "dev.hwpart:part" and "dev#partname". This allows one to flash to eMMC boot partitions without having to use CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT. It also allows one to flash to an entire device without needing CONFIG_FASTBOOT_MMC_USER_NAME. Lastly, one can also flash MMC devices other than CONFIG_FASTBOOT_FLASH_MMC_DEV. Because devices can be specified explicitly, CONFIG_FASTBOOT_FLASH_MMC_DEV is used only when necessary for existing functionality. For those cases, fastboot_mmc_get_dev has been added as a helper function. This allows There should be no conflicts with the existing system, but just in case, I have ordered detection of these names after all existing names. The fastboot_mmc_part test has been updated for these new names. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-26fastboot: Move part_get_info_by_name_or_alias after raw_part_get_info_by_nameSean Anderson1-22/+22
This makes the next commit more readable by doing the move now. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-26fastboot: Remove mmcpart argument from raw_part_get_info_by_nameSean Anderson1-23/+18
The only thing mmcpart was used for was to pass to blk_dselect_hwpart. This calls blk_dselect_hwpart directly from raw_part_get_info_by_name. The error handling is dropped, but it is reintroduced in the next commit (albeit less specificly). Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-07fastboot: reinit partition after storing GPT or MBRRoman Stratiienko1-0/+2
In case MMC has MBR system and fastboot writes GPT, MMC is still recognized as MBR. Invoke part_init() to purge cached data and update information about partition table type. Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
2021-02-07fastboot: add command to select the eMMC boot configurationPatrick Delaunay2-0/+43
Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07fastboot: add command to select the default emmc hwpart for bootPatrick Delaunay2-0/+43
Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
2021-02-07fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2Patrick Delaunay2-24/+49
Update the code and the configs for eMMC boot and userdata partitions acces - FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write) - FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0" - FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1" This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORTPatrick Delaunay2-8/+23
Split userdata and boot partition support for eMMC update and correct the description (update is supported). The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07fastboot: Implement generic fastboot_set_reboot_flagRoman Kovalivskyi1-1/+15
It is possible to implement fastboot_set_reboot_flag in a generic way if BCB commands are turned on for a target. Using bcb_set_reboot_reason allows to do this by simply passing string with correct reboot reason that should be handled during next boot process. If BCB are turned off, then bcb_set_reboot_reason would simply return error, so it won't introduce any new behaviour for such targets. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2021-02-07Revert "fastboot: Add default fastboot_set_reboot_flag implementation"Roman Kovalivskyi3-56/+0
This reverts commit 0ebf9842e56c5b8cb7cb1f990bb452cc14af6225. Current generic implementation of fastboot_set_reboot_flag is somewhat messy and requires some additional configuration option to be enabled besides CMD_BCB, so it reverts that implementtion in order to bring a new cleaner one. Next commit introduces new generic implementation of fastboot_set_reboot_flag. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2021-01-15disk: dos: rename write_mbr_partition to write_mbr_sectorMarek Szyprowski1-1/+1
write_mbr_partition() function name is a bit misleading, so rename it to write_mbr_sector(). This is a preparation for adding code for writing a complete MBR partition layout. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-09-01fastboot: getvar: fix partition-size return valueGary Bisson1-2/+2
The size returned by 'getvar partition-size' should be in bytes, not in blocks as fastboot uses that value to generate empty partition when running format [1]. Note that the function was already returning the proper size in bytes for NAND devices (see struct part_info details). [1] https://android.googlesource.com/platform/system/core/+/refs/heads/android10-release/fastboot/fastboot.cpp#1500 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2020-09-01fastboot: Add default fastboot_set_reboot_flag implementationRoman Kovalivskyi3-0/+56
Default implementation of fastboot_set_reboot_flag function that depends on "bcb" commands could be used in general case if there are no need to make any platform-specific implementation, otherwise it could be disabled via Kconfig option FASTBOOT_USE_BCB_SET_REBOOT_FLAG. Please note that FASTBOOT_USE_BCB_SET_REBOOT_FLAG is mutually exclusive with some platforms which already have their own implementation of this function. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01fastboot: Add support for 'reboot fastboot' commandRoman Kovalivskyi1-0/+38
Android 10 adds support for dynamic partitions and in order to support this userspace fastboot must be used[1]. New tool fastbootd is included into recovery. Userspace fastboot works from recovery and is launched if: 1) - Dynamic partitioning is enabled 2) - Boot control block has 'boot-fastboot' value into command field The bootloader is expected to load and boot into the recovery image upon seeing boot-fastboot in the BCB command. Recovery then parses the BCB message and switches to fastbootd mode[2]. Please note that boot script is expected to handle 'boot-fastboot' command in BCB and load into recovery mode. Bootloader must support 'reboot fastboot' command which should reboot device into userspace fastboot to accomodate those changes[3]. Another command that bootloader must support[3] is 'reboot recovery'. This command should simply reboot device into recovery mode. [1] - https://source.android.com/devices/bootloader/fastbootd [2] - https://source.android.com/devices/bootloader/fastbootd#unified_fastboot_and_recovery [3] - https://source.android.com/devices/bootloader/fastbootd#modifications_to_the_bootloader Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com> Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Change-Id: I9d2bdc9a6f6f31ea98572fe155e1cc8341e9af76
2020-09-01fastboot: Extend fastboot_set_reboot_flag with reboot reasonRoman Kovalivskyi2-2/+2
Extend fastboot_set_reboot_flag arguments with reboot reason so that it could handle different reboot cases in future. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01fastboot: Support defining raw partitions without a partition tableFilip Brozovic1-9/+66
Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-05-18common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop part.h from common headerSimon Glass2-0/+2
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18part: Drop disk_partition_t typedefSimon Glass2-12/+12
We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass3-0/+3
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee2-0/+132
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal1-2/+2
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-02common: Move command functions out of common.hSimon Glass2-0/+2
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-23fastboot: rockchip: Fix rk3328 default mmc deviceJagan Teki1-1/+0
Technically the default mmc device for fastboot would use eMMC if the board support for it. Rockchip platform access device 0 for eMMC so, use the same device number for rk3328. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 11:33:19 +0000