summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk16-38/+38
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing white spaceWolfgang Denk2-2/+2
Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk2-3/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk9-9/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-29Merge branch 'network_master' of ↵Tom Rini1-1/+11
https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-28net: replace the "xfi" phy-mode with "10gbase-r"Vladimir Oltean1-1/+11
As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28doc: Add mention of the /config bindingSimon Glass2-0/+11
The devicetree binding files are in their own directory and use a simple text format. Add a link for the binding for the /config node, since it is otherwise hard to find. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-27doc: ti: am335x_evm: Minor general updatesTom Rini1-35/+8
- At this point there are a large number of Beaglebone boards, refer to them as a family rather than a growing list. - Reword customization as we're largely Kconfig-oriented now. - Remove the NOR section as the relevant defconfigs have long been removed and the general support was not updated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27doc: ti: Convert am335x_evm README to rSTTom Rini2-0/+228
Convert the existing documentation to rST, keeping to just making formatting changes to start with. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Merge tag 'dm-pull-next-27sep21' of ↵Tom Rini2-6/+54
https://source.denx.de/u-boot/custodians/u-boot-dm into next Various of-platdata improvements, including CONFIG_OF_REAL
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini3-124/+11
Prepare v2021.10-rc5
2021-09-25dm: doc: Add a note about of-platdata header filesSimon Glass1-1/+49
This error can be confusing so mention it specifically in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Try to avoid the preprocessor with OF_REALSimon Glass1-3/+3
Convert some of these occurences to C code, where it is easy to do. This should help encourage this approach to be used in new code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Use OF_REAL instead of !OF_PLATDATASimon Glass1-1/+1
Now that we have a 'positive' Kconfig option, use this instead of the negative one, which is harder to understand. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...Simon Glass1-2/+2
The current API is outdated as it requires a devicetree pointer. Move these functions to use the ofnode API and update this globally. Add some tests while we are here. Correct the call in exynos_dsim_config_parse_dt() which is obviously wrong. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25doc: Add mention of the /config bindingSimon Glass2-0/+11
The devicetree binding files are in their own directory and use a simple text format. Add a link for the binding for the /config node, since it is otherwise hard to find. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-24drivers: tpm2: update reset gpio semanticsJorge Ramirez-Ortiz1-1/+2
Use the more generic reset-gpios property name. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-18Revert "doc: Update CapsuleUpdate READMEs"Simon Glass1-124/+0
This reverts commit 316ab801c0d91c02b21b8be1e3db7e69555364e9. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-17version: Remove global macro U_BOOT_VERSION_STRING from version.hPali Rohár1-9/+12
Version string is available in global variable char version_string[]. Macro U_BOOT_VERSION_STRING is not used by any other file, so remove it completely from version.h. Other files were already converted to use variable version_string[]. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-16dtoc: Further improve documentation about warningsSimon Glass1-4/+88
Split this information into subsections and expand it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini9-24/+120
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13Merge tag 'mmc-2021-9-13' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini1-2/+47
Support using mmc command for enumerating mmc card in a given mode Fix device_remove in mmc Fix switch issue with send_status disabled Drop 1ms delay in fsl_esdhc command sending Revert "mmc: sdhci: set to INT_DATA_END when there are data"
2021-09-12Merge tag 'efi-2021-10-rc4-2' of ↵Tom Rini6-20/+72
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc4-2 Documentation: * improve documentation of U-Boot for /config DT node * integrate bloblist documentation UEFI: * correct usage of EFI_CALL() * code tidy up
2021-09-11doc: Complete the list of available runtime-config optionsSimon Glass1-0/+45
The current list is missing a few items. Add them. Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11doc: Tidy up the bindings for the config/ nodeSimon Glass1-20/+26
Sort these and add a type so it is clear how to set the value. Add a note about usage to the top. Correct the 'no-keyboard' binding which is missing a prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11bloblist: Move to rST formatSimon Glass2-2/+3
Move this documentation to the new format. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-11doc: board: toradex: fix file namesOleksandr Suvorov3-2/+2
Fix the documentation file names: s/apalix/apalis/. Fixes: e98ea49a0e ("toradex: MAINTAINERS: entries for new reST docs") Fixes: 3730106cf0 ("doc: board: apalis-imx8x: add documentation") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-10doc: usage: mmc: Document usage of speed mode in "mmc dev" and "mmc rescan"Aswath Govindraju1-2/+47
Add documentation on the usage of "mmc dev" and "mmc rescan" commands to set user defined speed modes. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-09MAINTAINERS: Update ARM TI entryLokesh Vutla1-1/+1
Move TI maintainership to Tom. Updated with the following commands: find ./ -name MAINTAINERS | xargs sed -i s/"Lokesh Vutla <lokeshvutla@ti.com>"/"Tom Rini <trini@konsulko.com>"/g Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Tom Rini <trini@konsulko.com>
2021-09-04net: Rename SPL_NET_SUPPORT to SPL_NETSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04spi: Rename SPI_SUPPORT to SPISimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03Revert most of the series for adding vexpress_aemv8r supportTom Rini5-70/+2
Per a request from Andre Przywara and agreed with by Peter Hoyes, the vexpress aemv8r support wasn't quite ready to be merged, but the discussion had moved off list. We should keep the first patch in the series for now, but revert the rest. This reverts the following commits: e0bd6f31ce41 doc: Add documentation for the Arm vexpress board configs 30e5a449e8c7 arm: Use armv8_switch_to_el1 env to switch to EL1 b53bbca63bf4 vexpress64: Add BASER_FVP vexpress board variant 2f5b7b74903f armv8: Add ARMv8 MPU configuration logic 37a757e227cc armv8: Ensure EL1&0 VMSA is enabled Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03doc: Remove information about CAPSULE_FMP_HEADERMichal Simek1-1/+0
This Kconfig symbol was never added to U-Boot but it was mentioned in the origin commit c35df7c9e43e ("qemu: arm64: Add documentation for capsule update"). That's why remove it from documentation to be accurate. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-02doc: Add documentation for the Arm vexpress board configsPeter Hoyes4-1/+69
Create a new documentation section for Arm Ltd boards with a sub-page for the vexpress board (FVP-A, FVP-R and Juno). Document how the armv8_switch_to_el1 environment variable can be used to switch between booting from S-EL2/S-EL1 at runtime on the BASER_FVP. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02vexpress64: Add BASER_FVP vexpress board variantPeter Hoyes1-1/+1
The BASER_FVP board variant is implemented on top of the BASE_FVP board config (which, in turn, is based on the Juno Versatile Express board config). They all share a similar memory map - for BASER_FVP the map is inverted from the BASE_FVP (https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map) * Create new TARGET_VEXPRESS64_BASER_FVP target, which uses the same board config as BASE_FVP and JUNO * Adapt vexpress_aemv8a.h header file to support BASER_FVP (and rename to vexpress_aemv8.h) * Enable config to switch to EL1 for the BASER_FVP * Create vexpress_aemv8r defconfig * Provide an MPU memory map for the BASER_FVP For now, only single core boot is supported. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> [trini: Add MAINTAINERS, move BOOTCOMMAND to defconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01board: stemmy: Update documentationStephan Gerhold3-0/+91
Over the time, the "stemmy" U-Boot board was tested on several other Samsung smartphones based on ST-Ericsson NovaThor Ux500. Convert the documentation to reStructuredText at doc/board/ste/stemmy.rst and make the device list complete. Also note that the board now boots into USB Fastboot instead of just ending up at the U-Boot prompt. The device table is mostly taken from the postmarketOS wiki article (https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500). All the newly added devices were tested by Linus Walleij. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01scripts/checkpatch.pl: Resync with v5.13Tom Rini2-0/+756
This resyncs us with the version found in v5.13 of the Linux kernel with the following exceptions: - Keep our u-boot specific tests / code area. - Change the location of checkpatch.rst (which we now import) - Drop the "use strscpy" test as we don't have that, but do have strlcpy and want that used now. - Keep debug/printf in the list for $logFunctions And note that we now also include the spdxcheck.py tool that checkpatch.pl supports calling out to, and include upstream's checkpatch.rst in our develop section of the documentation. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Merge branch 'next' of ↵Tom Rini1-0/+19
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next - Handling all DM watchdogs in watchdog_reset() (Rasmus)
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini1-2/+2
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDRTom Rini1-1/+1
All platforms define CONFIG_SYS_LOAD_ADDR, but only some define CONFIG_LOADADDR. Very very rarely are these not the same address, and qemu-ppce500 is one such case. However, based on reading the history of the code, this mismatched value was simply a copy-paste from other PowerPC platforms where it is this unused currently. Switch the code to use CONFIG_SYS_LOAD_ADDR and update the documentation. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-31watchdog: add gpio watchdog driverRasmus Villemoes1-0/+19
A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-23Merge tag 'efi-2021-10-rc3' of ↵Tom Rini19-33/+5
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc3 Documentation: * Rename Freescale to NXP * Document structures used for the UEFI TCG2 protocol UEFI: * Device paths must use EfiBootServicesData
2021-08-22bootcount: add a new driver with syscon as backendNandor Han1-0/+24
The driver will use a syscon regmap as backend and supports both 16 and 32 size value. The value will be stored in the CPU's endianness. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-17doc: move doc/board/st/st.rstHeinrich Schuchardt2-1/+1
'make htmldocs' does not use file doc/board/st/st.rst because the name matches the directory name. Let's rename it to st-dt.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-17doc: rename Freescale to NXPHeinrich Schuchardt14-3/+3
Freescale Semiconductor, Inc. was merged into NXP Semiconductors in 2015. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-17doc: move i.MX7D/i.MX8MM A/B booting to board specificHeinrich Schuchardt5-29/+1
Having "i.MX7D/i.MX8MM SRC_GPR10 PERSIST_SECONDARY_BOOT for bootloader A/B switching" at the top level of the documentation tree does not make sense. Move it to board specific information. Fixes: 59e3d1bd4992 ("doc: imx: psb: Document usage of SRC_GPR10 PERSIST_SECONDARY_BOOT for A/B switching") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-16doc: st: stm32mp1: Add FIP support for trusted bootPatrick Delaunay1-96/+232
TF-A for STM32MP15 now supports the FIP: it is a packaging format which includes the secure monitor, u-boot-nodtb.bin and u-boot.dtb This FIP file is loaded by FSBL = TF-A BL2. This patch updates the board documentation to use this FIP file and no more u-boot.stm32 (with STM32 image header) which is no more generated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-14doc: stm32mp1: add page for device tree bindingsPatrick Delaunay13-893/+69
With device tree binding migration to yaml it is difficult to synchronize the binding from Linux kernel to U-Boot. Instead of maintaining the same dt bindings, this patch adds in the U-Boot documentation the path to the device tree bindings in Linux kernel for STMicroelectronics devices, when they are used without modification. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Add links for referenced text files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 01:01:00 +0000