summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2024-05-06Prepare v2024.07-rc2Tom Rini1-2/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-01doc: correct description of 'env print -e'Heinrich Schuchardt1-3/+7
If 'env print -e' is invoked without variable name, all UEFI variables are listed. Describe that 'env print -e' requires CONFIG_HEXDUMP=y to print content of UEFI variables. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-26rockchip: rk3588-coolpi: Add boards to documentationJonas Karlman1-0/+2
Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation. Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-04-23board: add support for Schneider HMIBSC boardSumit Garg3-0/+55
Support for Schneider Electric HMIBSC. Features: - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) - 2GiB RAM - 64GiB eMMC, SD slot - WiFi and Bluetooth - 2x Host, 1x Device USB port - HDMI - Discrete TPM2 chip over SPI Features enabled in U-Boot: - RAUC updates - Environment protection - USB based ethernet adaptors Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-04-23serial: msm: calculate bit clock dividerCaleb Connolly1-10/+0
The driver currently requires the bit clock divider be hardcoded in devicetree (or use the hardcoded default from apq8016). The bit clock divider is used to derive the baud rate from the core clock: baudrate = clk_rate / csr_div clk_rate is the actual programmed core clock rate which is returned by clk_set_rate(), and this UART driver only supports a baudrate of 115200. We can therefore determine the appropriate value for UARTDM_CSR by iterating over the possible values and finding the one where the equation above holds true for a baudrate of 115200. Implement this logic and drop the non-standard DT bindings for this driver. Tested on dragonboard410c. Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-04-22Prepare v2024.07-rc1Tom Rini1-4/+3
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-22doc: release_cycle: Note when next branch opensTom Rini1-0/+3
While I have said this in various release emails, it should be documented here as well that the next branch opens with the second release candidate. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-20doc: update list of aliases for the env commandHeinrich Schuchardt1-1/+2
* add link to askenv man-page * add printenv Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-20doc: sort env sub-commands alphabeticallyHeinrich Schuchardt1-17/+17
The 'env' man-page is currently only partially sorted. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-19Merge tag 'u-boot-dfu-20240419' of ↵Tom Rini1-0/+18
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20240419 - new "fastboot oem board" command
2024-04-18Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE ↵Tom Rini2-2/+1
enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-18fastboot: introduce 'oem board' subcommandAlexey Romanov1-0/+18
Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-04-14Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini1-0/+13
2024-04-13doc/sphinx: Bump idna to 3.7Tom Rini1-1/+1
While we unlikely to have an issue with CVE-2024-3651, it is simple enough to bump our version of idna to receive the fix, do so. Reported-by: GitHub dependabot Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-13Fix references to trace docVincent Stehlé1-2/+2
The README.trace has been moved and converted to rst in commit dce26c7d56ed ("doc: move README.trace to HTML documentation"); fix all the remaining references to this file. Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-13doc: build: fix gen_compile_commands section levelMattijs Korpershoek1-2/+2
The 2 subsections of this page ("Compatible IDEs" and "Usage") are using the same header level as the title (with "==="). Because of this, they always appear in the HTML rendered ToC. Drop the subsections one level lower by replacing "=" by "-". This fixes the HTML rendering. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2024-04-13doc: build: update docker image to latestMattijs Korpershoek1-1/+1
commit cacc0b2678c0 ("CI: Move to latest container image") updated the docker container image. Reflect the change in the documentation. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2024-04-12usb: Add environment based device ignorelistJanne Grunau1-0/+13
Add the environment variable "usb_ignorelist" to prevent USB devices listed in it from being bound to drivers. This allows to ignore devices which are undesirable or trigger bugs in u-boot's USB stack. Devices emulating keyboards are one example of undesirable devices as u-boot currently supports only a single USB keyboard device. Most commonly, people run into this with Yubikeys, so let's ignore those in the default environment. Based on previous USB keyboard specific patches for the same purpose. Link: https://lore.kernel.org/u-boot/7ab604fb-0fec-4f5e-8708-7a3a7e2cb568@denx.de/ Reviewed-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Janne Grunau <j@jannau.net>
2024-04-11arm: dts: k3: Remove unneeded ti, sci-sysreset binding and nodesAndrew Davis1-29/+0
This extra binding is non-standard and now unneeded as we bind the sysreset driver automatically. This matches what is done in Linux and allows us to more closely match the DTBs. Remove the binding and all users. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Tested-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-04-10Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"Tom Rini2-1/+2
Simon Glass <sjg@chromium.org> says: This series is the culmanation of the current line of refactoring series. It adjusts pxe to call the booting functionality directly rather than going through the command-line interface. With this is is possible to boot using the extlinux bootmeth without the command line enabled. It also updates fastboot to do a similar thing.
2024-04-10x86: Drop message about features being missing with 64-bitSimon Glass1-1/+1
At this point most things work, including booting a distro, so drop this message. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-04-10doc: Mention fastboot dependency on CMDLINESimon Glass1-0/+1
The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2024-04-09doc: describe Milk-V Mars boardHeinrich Schuchardt2-0/+112
Add instructions to build U-Boot for the Milk-V Mars board Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-04-09riscv: do not set default fdt for VisionFive 2Heinrich Schuchardt1-0/+18
Currently in set_fdtfile() we set the value of environment variable fdtfile unconditionally. The implies that a value in the environment will be ignored. With the patch environment variable fdtfile will only be set if it does not yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set. Now the user can either set and save fdtfile interactively or in the U-Boot configuration to overrule the device-tree name chosen based on the hardware in set_fdtfile(). Reported-by: E Shattow <lucent@gmail.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-04-08doc: improve description of FAT partition name generationHeinrich Schuchardt1-3/+14
List all prefix currently used for generating FAT partition names. Describe which device class uses which prefix. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-08doc: missing :: in doc/usage/cmd/itest.rstHeinrich Schuchardt1-0/+2
Add :: for correct formatting of example. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-04-04board: amlogic: jethubj100: update docsViacheslav Bocharov1-4/+7
Improove documentation, add new revision. Signed-off-by: Viacheslav Bocharov <adeep@lexina.in> Link: https://lore.kernel.org/r/20240227065551.580199-4-adeep@lexina.in [narmstrong: squashed https://lore.kernel.org/all/20240326082004.1651782-1-adeep@lexina.in/] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-04-02Merge branch 'next'Tom Rini26-339/+1507
Merge in all changes from the next branch now that the release is out.
2024-04-02Prepare v2024.04Tom Rini2-11/+891
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-27doc: add reference to itest in if man-pageHeinrich Schuchardt1-3/+3
Add a cross reference to the itest command. Fix a typo: %s/Example/Examples/. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-27doc: man-page for itestHeinrich Schuchardt2-0/+114
Provide a man-page for the itest command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-25Merge tag 'v2024.04-rc5' into nextTom Rini5-28/+110
Prepare v2024.04-rc5
2024-03-25Prepare v2024.04-rc5Tom Rini1-5/+5
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-21doc: typo SynopisHeinrich Schuchardt21-42/+42
%s/Synopis/Synopsis/g Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-21doc: man-page for ifHeinrich Schuchardt2-0/+73
Provide a man-page for the if command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-21doc: board: apalis-imx8: Update and improve documentationHiago De Franco1-16/+16
Update and improve the building documentation of Apalis iMX8. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
2024-03-21doc: board: colibri-imx8x: Update and improve documentationHiago De Franco1-7/+16
Update and improve the building documentation of Colibri iMX8X. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-03-21doc: typo SynopisHeinrich Schuchardt21-42/+42
%s/Synopis/Synopsis/g Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-21doc: devicetree: Lets avoid short reference link namesSumit Garg1-12/+12
Short reference link names like "dtspec", "dtrepo", "dttweaks" etc. interrupt the flow of the document text. Lets avoid them and instead expand in place for better readability. Suggested-by: Paul Barker <paul.barker.ct@bp.renesas.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-19Merge tag 'u-boot-socfpga-next-20240319' of ↵Tom Rini8-15/+95
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next - A new driver in the misc to register setting from device tree. This also provides user a clean interface and all register settings are centralized in one place, device tree. - Enable Agilex5 platform for Intel product. Changes, modification and new files are created for board, dts, configs and makefile to create the base for Agilex5. Build-tested on SoC64 boards, boot tested on some of them.
2024-03-18drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGAWan Yee Lau1-0/+80
Add socfpga_dtreg driver enablement for Intel SoCFPGA. Signed-off-by: Wan Yee Lau <wan.yee.lau@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2024-03-15Merge tag 'u-boot-rockchip-20240315' of ↵Tom Rini7-3/+346
https://source.denx.de/u-boot/custodians/u-boot-rockchip into next Please pull the updates for rockchip platform: - Add board: rk3588 Generic, Cool Pi CM5, Theobroma-Systems RK3588 Jaguar SBC, Toybrick TB-RK3588X; rk3588s Cool Pi 4B; rk3566 Pine64 PineTab2; - Add saradc v2 support; - Add PMIC RK806 support; - rk3588 disable force_jtag by default; - Migrate to use IO-domain driver for all boards; - Use common bss and stack addresses for rk33xx and rk35xx boards; - Other updates for driver, config and dts;
2024-03-14board: rockchip: Add support for Powkiddy RGB10MAX3Chris Morgan1-0/+1
Add support to the RGxx3 device for the Powkiddy RGB10MAX3. This device is extremely similar to all the other devices and can use the same bootloader with the same detection logic. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14board: rockchip: Add Pine64 PineTab2Jonas Karlman1-0/+1
The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566 SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage. Features tested on a Pine64 PineTab2 8GB v2.0: - SD-card boot - eMMC boot - SPI Flash boot - USB host Device tree is imported from linux maintainer branch v6.9-armsoc/dts64, commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64 PineTab2"). Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14rockchip: board: Add minimal generic RK3588S/RK3588 boardJonas Karlman1-1/+2
Add a minimal generic RK3588S/RK3588 board that only have eMMC and SDMMC enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3588S/RK3588 boards that follow reference board design. Also fix the alphabetical order of RK3588 boards listed in Makefile and documentation. Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2024-03-14board: rockchip: add Rockchip Toybrick TB-RK3588X boardElon Zhang1-0/+1
TB-RK3588X board is a Rockchip Toybrick RK3588 based development board. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB Memory LPDDR4x Mali G610MC4 GPU 2× MIPI-CSI0 Connector 1x 2Lanes PCIe3.0 Connector 1x SATA3.0 Connector 32GB eMMC Module 2x USB 2.0, 2x USB 3.0 1x HDMI Output, 1x HDMI Input 2x Ethernet Port Functions work normally: [1] USB2.0 Host [2] Ethernet0 with PHY RTL8211F More information can be obtained from the following websites: [1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html [2] http://t.rock-chips.com/ Kernel commits: 8ffe365f8dc7 ("arm64: dts: rockchip: Add devicetree support for TB-RK3588X board") 7140387ff49d ("dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X") Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com> Signed-off-by: Elon Zhang <zhangzj@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14rockchip: rk3328-orangepi-r1-plus: Update defconfigJonas Karlman1-0/+2
Update defconfig for rk3328-orangepi-r1-plus boards with new defaults. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep support for scripts. Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is not included in the SPL fdt. Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator commands. Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on cpuid read from eFUSE. Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL. Add DM_ETH_PHY=y, PHY_GIGE=y, PHY_MOTORCOMM=y, PHY_REALTEK=y and remove &gmac2io to support reset of onboard ethernet PHYs. Also add DM_MDIO=y to ensure device tree props is used by motorcomm PHY driver. Add PHY_ROCKCHIP_INNO_USB2=y option to support the onboard USB PHY. Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used. Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random generator. Also add missing device tree files to MAINTAINERS file. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Tianling Shen <cnsztl@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14rockchip: rk3328-nanopi-r2: Update defconfigJonas Karlman1-0/+3
Update defconfig for rk3328-nanopi-r2* boards with new defaults. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep support for scripts. Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is not included in the SPL fdt. Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator commands. Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on cpuid read from eFUSE. Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL. Add DM_ETH_PHY=y, PHY_GIGE=y, PHY_MOTORCOMM=y, PHY_REALTEK=y and remove &gmac2io to support reset of onboard ethernet PHYs. Also add DM_MDIO=y to ensure device tree props is used by motorcomm PHY driver. Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used. Add DM_REGULATOR_GPIO=y and SPL_DM_REGULATOR_GPIO=y to support the regulator-gpio compatible. Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random generator. Also add missing device tree files to MAINTAINERS file. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Tianling Shen <cnsztl@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14rockchip: rk3328-rock-pi-e: Update defconfigJonas Karlman1-1/+1
Update defconfig for rk3328-rock-pi-e with new defaults. Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep support for scripts. Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is not included in the SPL fdt. Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator commands. Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on cpuid read from eFUSE. Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL. Add DM_MDIO=y to ensure device tree props can be used by PHY driver. Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used. Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random generator. Also add myself as a reviewer for this board. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14rockchip: rk3328-roc-cc: Update defconfigJonas Karlman1-1/+1
Update defconfig for rk3328-roc-cc with new defaults. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep support for scripts. Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is not included in the SPL fdt. Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator commands. Also add CMD_POWEROFF=y to be able to use the poweroff command. Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on cpuid read from eFUSE. Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL. Add DM_ETH_PHY=y, PHY_MOTORCOMM=y and PHY_REALTEK=y to support common ethernet PHYs. Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used. Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random generator. Also add missing device tree file to MAINTAINERS and add myself as a reviewer for this board. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 04:37:19 +0000