summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-04-21configs: tdx: Do not overwrite fdtfile if it got set manuallyPhilippe Schenker7-7/+7
In case a customer wants to set fdtfile currently preboot overrides it always with preboot just before the bootdelay. Use test -n to check if fdtfile is already set and only set it if nothing got touched manually Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21configs: colibri-imx7/-emmc: enable booting from usb sdpOleksandr Suvorov2-0/+2
For recovery purpose allow booting via SDP over USB as well. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21configs: toradex: enable missing fit optionsOleksandr Suvorov10-0/+11
Add missing support of FIT-images and enable a verbosity for this feature. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21toradex: globally disable video supportIgor Opaniuk8-60/+0
As video support is very specific depending on the exact display customisation we decided to disable video support for all out modules by default. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21toradex: apalis-imx8x: drop support for apalis imx8xDenys Drozdov1-82/+0
Drop Apalis iMX8X platform as it never left sample state and is no longer supported. Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-20configs: Resync with savedefconfigTom Rini23-33/+19
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-20cmd: gpio: Add `gpio read` subcommandDiego Rondini1-0/+1
As explained in commit 4af2a33ee5b9 ("cmd: gpio: Make `gpio input` return pin value again") the `gpio input` is used in scripts to obtain the value of a pin, despite the fact that CMD_RET_FAILURE is indistinguishable from a valid pin value. To be able to detect failures and properly use the value of a GPIO in scripts we introduce the `gpio read` command that sets the variable `name` to the value of the pin. Return code of the `gpio read` command can be used to check for CMD_RET_SUCCESS or CMD_RET_FAILURE. CONFIG_CMD_GPIO_READ is used to enable the `gpio read` command. Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2022-04-20Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000Tom Rini259-144/+115
The most commonly used value today is 0x2000 and not 0x400. Rework the Kconfig logic to use this more frequently used value as the default. Cc: Andrew F. Davis <afd@ti.com> Cc: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alison Wang <alison.wang@nxp.com> Cc: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Cc: Andes <uboot@andestech.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Bharat Gooty <bharat.gooty@broadcom.com> Cc: David Lechner <david@lechnology.com> Cc: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Eugeniy Paltsev <paltsev@synopsys.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Gerald Kerma <dreagle@doukki.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Kristian Amlie <kristian.amlie@northern.tech> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Liviu Dudau <liviu.dudau@foss.arm.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org> Cc: Matthias Brugger <mbrugger@suse.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Cc: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Bosch <stefan_b@posteo.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Thomas Weber <weber@corscience.de> Cc: Tony Dinh <mibodhi@gmail.com> Cc: Trevor Woerner <twoerner@gmail.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: liuhao <liuhao@phytium.com.cn> Cc: lixinde <lixinde@phytium.com.cn> Cc: shuyiqi <shuyiqi@phytium.com.cn> Cc: weichangzheng <weichangzheng@phytium.com.cn> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Kristian Amlie <kristian.amlie@northern.tech>
2022-04-19Convert CONFIG_SYS_MEM_TOP_HIDE to KconfigTom Rini7-0/+7
This converts the following to Kconfig: CONFIG_SYS_MEM_TOP_HIDE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-19configs: Enable EXT4 and ISO partitions for the DeveloperBoxIlias Apalodimas1-0/+2
Since this box is SystemReady compliant enable ISO_PARTITION which is needed to start some installers (e.g Fedora). While at it enable EXT4 as well which is a common filesystem for targets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2022-04-18rockchip: rk3066: add mk808_defconfigJohan Jonker1-0/+102
This commit adds the default configuration file and relevant description for a MK808 board. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18rockchip: move ROCKCHIP_STIMER_BASE to KconfigJohan Jonker1-0/+1
Move ROCKCHIP_STIMER_BASE to Kconfig. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18rockchip: Enable AHCI/SCSI/SATA on rockpro64-rk3399.Vagrant Cascadian1-0/+7
Add options to enable AHCI, SCSI and SATA. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-15Merge tag 'efi-2022-07-rc1-2' of ↵Tom Rini3-2/+5
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-07-rc1-2 Documentation: * Describe env command UEFI * simplify Unicode string functions * clean up the usage of GUIDs for capsule updates
2022-04-15Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-netTom Rini7-0/+7
- DM9000 DM support - tftp server bug fix - mdio ofnode support functions - Various phy fixes and improvements. [trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c drivers/net/phy/phy.c include/phy.h]
2022-04-15test: capsule: Modify the capsule tests to use GUID values for sandboxSughosh Ganu3-2/+5
The current UEFI capsule updation code uses two GUID values, one for FIT images, and one for raw images across platforms. This logic is being changed to have GUID values per image, per platform. Change the tests for the capsule update code to reflect this change. The GUID values now used are the ones specific to the sandbox platform -- one for the u-boot image, and another for the u-boot environment image. Install the FMP instance for raw images on the sandbox variant for testing the capsule update code. Install the FMP instance for the FIT images on the sandbox64 and sandbox_flattree variant for testing capsule update for FIT images. This is being done by splitting the capsule update script for FIT and raw images. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-14sandbox: Increase default SYS_MALLOC_LENTom Rini5-5/+0
Increase the malloc pool on sandbox in order to avoid spurious errors such as: ___________________ test_ut[ut_dm_dm_test_video_comp_bmp32] ____________________ test/py/tests/test_ut.py:43: in test_ut assert output.endswith('Failures: 0') E AssertionError: assert False E + where False = <built-in method endswith of str object at 0x7f5de85efb20>('Failures: 0') E + where <built-in method endswith of str object at 0x7f5de85efb20> = 'Test: dm_test_video_comp_bmp32: video.c\r\r\nSDL renderer does not exist\r\r\ntest/dm/video.c:86, compress_frame_buff..._test_video_comp_bmp32(): 2024 == compress_frame_buffer(uts, dev): Expected 0x7e8 (2024), got 0x1 (1)\r\r\nFailures: 2'.endswith Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-13configs: Resync with savedefconfigTom Rini92-98/+86
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-13configs: net: dm9000: Move new Kconfig option to board configsMarek Vasut7-0/+7
Drop legacy #define CONFIG_DRIVER_DM9000 from board include/configs/ and enable the same in Kconfig configs/ . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-13Merge tag 'u-boot-imx-20220413' of ↵Tom Rini114-18/+655
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220413 i.MX patches for 2022.07 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11710
2022-04-13board: gateworks: venice: add imx8mm-gw7903 supportTim Harvey1-1/+1
The GW7903 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD socket with voltage select support - Gateworks System Controller - M.2 A-E Socket with USB2.0 and PCIe - MiniPCIe Socket with PCIe, USB2.0, and SIM - IMX8M FEC - RS232/RS485/RS422 serial transceiver - LIS2DE12 3-axis accelerometer - front panel LED's - off-board isolated digital I/O - Wide range DC power input - 802.3at PoE - PMIC Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-13warp7: Remove duplicated "mmc dev" commandFabio Estevam2-2/+2
The "mmc dev ${mmcdev}" command is done twice. Remove one ocurrence to avoid the duplication. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12kontron-pitx-imx8m: change environment address variablesHeiko Thiery1-1/+1
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value. The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h". The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have the same value as for the kernel_addr_r. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-04-12ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo boardMarek Vasut1-0/+120
Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo. The board is a compatible replacement for i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs, SD and eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-12configs/*imxrt10*: SYS_MALLOC_LEN is too largeJesse Taube2-2/+2
1M of heap is more than internal ram making booting without SDRAM not possible now it is 256k Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-04-12ARM: renesas: reduce rcar3_salvator-x image sizeHeinrich Schuchardt1-0/+1
rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit. Enable linked time optimization (LTO). Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-04-12ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBCMarek Vasut1-0/+227
Add support for Data Modul i.MX8M Mini eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB host and USB OTG. Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-12imx8mm-cl-iot-gate: Add redundand environment supportFabio Estevam1-1/+3
Add redundand environment support as it is required by SWUpdate. While at it, also adjust the CONFIG_ENV_OFFSET to a more appropriate larger offset as done on other i.MX8M defconfigs. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROMFabio Estevam2-0/+4
Currently the eth0 MAC address is randomly assigned. Retrieve the MAC address from EEPROM. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsAriel D'Alessandro2-0/+189
Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512MiB Nand - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12imx: mx7dsabresd: enable DM_SERIALPeng Fan2-0/+2
Enable CONFIG_DM_SERIAL, and `dm tree` could show: serial 1 [ ] serial_mxc | |-- serial@30a80000 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driverMarcel Ziswiler2-0/+2
Use the Micrel KSZ8xxx specific Ethernet PHY driver rather than the generic one. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12configs: verdin-imx8mm: verdin-imx8mp: enable dm serialMarcel Ziswiler2-0/+2
Enable driver model for serial. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12imx: imx8ulp_evk: enlarge CONFIG_NR_DRAM_BANKSPeng Fan1-1/+1
When TEE is present, the DRAM maybe split to two parts, so enlarge CONFIG_NR_DRAM_BANKS Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12configs: imx8mm_evk: add pwm backlight supportTommaso Merciai1-0/+4
Enable support for backlight/pwm-imx driver Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
2022-04-12tbs2910: Convert to DM_SERIALFabio Estevam1-1/+1
Conversion to DM_SERIAL is mandatory. Select DM_SERIAL and add a imx6q-tbs2910-u-boot.dtsi file that describes the nodes that require dm-pre-reloc, which allows the DM model to configure the UART pinctrl early. Remove the now unneeded board UART initialization. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Soeren Moch <smoch@web.de>
2022-04-12warp7: Remove UART initialization codeFabio Estevam2-0/+2
With DM_SERIAL selected, it is no longer needed board code to initialize the UART. Describe the nodes that require dm-pre-reloc, which allows the DM model to configure the UART pinctrl early. Remove the now unneeded board UART initialization. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-12board: gateworks: gw_ventana: convert to DM_I2CTim Harvey3-3/+3
convert to DM_I2C for U-Boot while leaving SPL legacy I2C: - Move I2C config from common to SPL - Move PMIC config from common to SPL (no need to re-configure pmic) - add DM_I2C support to eeprom/gsc functions shared by SPL and U-Boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12ARM: imx: imx8mn-evk: enable DM_SERIALHeiko Thiery1-0/+2
U-Boot complains that CONFIG_SERIAL is not converted to CONFIG_DM_SERIAL and gives a deadline before possibly removing the board. Migrate to DM_SERIAL to fulfill the request. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj boardMichael Trimarchi1-0/+1
Enable LTO on mamoj to reduce SPL and uboot size. Tested with gcc gcc-11.1.0 U-Boot 2022.04-rc4-00051-g17fc5facd0 (Mar 23 2022 - 16:43:43 +0100) CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 40C Reset cause: POR Model: BTicino i.MX6DL Mamoj board DRAM: 512 MiB Core: 29 devices, 12 uclasses, devicetree: separate MMC: FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Error: ethernet@2188000 address not set. No ethernet found. Tested-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12PPC: Enable Job ring driver model.Gaurav Jain38-0/+38
removed sec_init() call from board files. sec is initialized based on job ring information processed from device tree. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-12Layerscape: Enable Job ring driver model.Gaurav Jain43-0/+43
LS(1021/1012/1028/1043/1046/1088/2088), LX2160, LX2162 platforms are enabled with JR driver model. removed sec_init() call from board files. sec is initialized based on job ring information processed from device tree. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Michael Walle <michael@walle.cc>
2022-04-12mx6sabre: Remove unnecessary SPL configsYe Li2-6/+0
Because we don't use SPL_DM on mx6sabresd and mx6sabreauto, so it is unnecessary to have SPL DTB related configs and SPL_OF_CONTROL enabled. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-04-12LS1043ARDB, LS1046ARDB, LS1088ARDB: Enable SPL_OF_CONTROL in SECURE Boot ↵Kshitiz Varshney4-0/+4
defconfig If enable SPL_DM without SPL_OF_CONTROL, build errors "undefined reference to fdt_get_resource", is coming in function `caam_jr_probe'. Added SPL_OF_CONTROL to remove the error. Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
2022-04-11configs: add support of OPTEE RNG in stm32mp15 defconfigPatrick Delaunay2-0/+2
When the RNG device is secured with OP-TEE, it is only accessible with the HWRNG TA, the CONFIG_RNG_OPTEE is needed for STM32MP15 targets with OP-TEE support. The probe of this RNG driver fails when the TA is not available in OP-TEE and the previous driver can be used, as CONFIG_RNG_STM32MP1 is activated and when the associated node is activated in the device tree with: &rng1 { status = "okay"; }; When the RNG is used in OP-TEE, this node should be deactivated in the Linux and U-Boot device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-04-08configs: Resync with savedefconfigTom Rini639-748/+720
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08Convert CONFIG_FSL_QIXIS et al to KconfigTom Rini73-0/+104
This converts the following to Kconfig: CONFIG_FSL_QIXIS CONFIG_QIXIS_I2C_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08Convert CONFIG_DIMM_SLOTS_PER_CTLR to KconfigTom Rini31-0/+31
This converts the following to Kconfig: CONFIG_DIMM_SLOTS_PER_CTLR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to KconfigTom Rini11-0/+22
This is a little tricky since SoCFPGA has code to determine this as runtime. Introduce a guard variable for platforms to select if they have a static value to use. Then for ARCH_SOCFPGA, call cm_get_qspi_controller_clk_hz() and otherwise continue the previous behavior. Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08Convert CONFIG_SH_SCIF_CLK_FREQ to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SH_SCIF_CLK_FREQ Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 13:28:04 +0000