summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-04-04Merge tag 'u-boot-at91-2022.07-a' of ↵Tom Rini9-9/+9
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.07 cycle: This feature set includes the new driver for the Atmel TCB timer, alignment in DT for sama7g5 and sama7g5ek board, one Kconfig conversion for external reset, and the usage of Galois tables from ROM for sama5d2 device.
2022-04-01vexpress64: Add ARMv8R-64 board variantPeter Hoyes1-0/+14
The ARMv8-R64 architecture introduces optional VMSA (paging based MMU) support in the EL1/0 translation regime, which makes that part mostly compatible to ARMv8-A. Add a new board variant to describe the "BASE-R64" FVP model, which inherits a lot from the existing v8-A FVP support. One major difference is that the memory map in "inverted": DRAM starts at 0x0, MMIO is at 2GB [1]. * Create new TARGET_VEXPRESS64_BASER_FVP target, sharing most of the exising configuration. * Implement inverted memory map in vexpress_aemv8.h * Create vexpress_aemv8r defconfig * Provide an MMU memory map for the BASER_FVP * Update vexpress64 documentation At the moment the boot-wrapper is the only supported secure firmware. As there is no official DT for the board yet, we rely on it being supplied by the boot-wrapper into U-Boot, so use OF_HAS_PRIOR_STAGE, and go with a dummy DT for now. [1] https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> [Andre: rebase and add Linux kernel header] Signed-off-by: Andre Przywara <andre.przywara@arm.com> [trini: Add MAINTAINERS entry for Peter]
2022-04-01vexpress64: defconfigs: allow default commandsAndre Przywara2-17/+0
Right now the defconfig the Arm VExpress64 boards disables quite some standard commands, for apparently no good reasons (as image size is hardly a concern here). Remove the lines explicitly disabling those features, leaving it to the U-Boot default settings to set them. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01vexpress64: fvp: add distro_boot supportAndre Przywara2-5/+1
So far the FVP model just supports booting through semihosting, so by loading files from the host the model is running on. This allows for quick booting of new kernels (or replacing DTBs), but prevents more featureful boots like using UEFI. Enable the distro_boot feature, and provide a list of possible boot sources that U-Boot should check: - For backwards compatibility we start with semihosting, which gets its commands migrated from CONFIG_BOOTCOMMAND into the distro_boot infrastructure. This is also slightly tweaked to fail graceful in case the required files could not be found. - Next we try to use a user provided script, that could be easily placed into memory using the model command line. - Since we gained virtio support with the enablement of OF_CONTROL, let's check virtio block devices next. This is where UEFI boot can be easily used, for instance by providing a distro installer .iso file through virtio-blk. - Networking is now provided by virtio as well, so enable the default PXE and DHCP boot flows, mostly because we can. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01vexpress64: move hardware setting from defconfig to KconfigAndre Przywara2-29/+2
The defconfigs for the Arm Juno board and the FVP model are quite large, setting a lot of platform-fixed variables like SYS_TEXT_BASE. As those values are not really a user choice, let's provide default values for them in our Kconfig file, so a lot of cruft can be removed from the defconfig files. This also moves the driver selection out of there, since this is again not something a user should really decide on. Instead we allow users to enable or disable subsystems, and select the appropriate drivers based on that in the Kconfig file. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01vexpress64: fvp: enable OF_CONTROLAndre Przywara1-1/+1
The FVP base model is relying on a DT for Linux operation, so there is no reason we would need to rely on hardcoded information for U-Boot. Letting U-Boot use a DT will open up the usage of actual peripherals, beyond the support for semihosting only. Enable OF_CONTROL in the Kconfig, and use the latest dts files from Linux. Depending on whether we use the boot-wrapper or TF-A, there is already a DTB provided or not, respectively. To cover the boot-wrapper, we add an arm64 Linux kernel header, which allows the boot-wrapper to treat U-Boot like a Linux kernel. U-Boot will find the pointer to the DTB in x0, and will use it. Even though TF-A carries a DT, at the moment this is not made available to non-secure world, so to not break users, we use the U-Boot provided DTB copy in that case. For some reason TF-A puts some DT like structure at the address x0 is pointing at, but that is very small and doesn't carry any hardware information. Make the code to ignore those small DTBs. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01vexpress64: Kconfig: move board definitions out of arch/armAndre Przywara2-4/+3
At the moment we define three "VExpress64" boards in arch/arm/Kconfig, plus have a second Kconfig file in board/armltd/Kconfig. One of those three boards is actually bogus (TARGET_VEXPRESS64_AEMV8A), that stanza looks like being forgotten in a previous cleanup. To remove the clutter from the generic Kconfig file, just define some ARCH_VEXPRESS64 symbol there, enable some common options, and do the board/model specific configuration in the board/armltd Kconfig file. That allows to streamline and fine tune the configuration later, and to also pull a lot of "non user choices" out of the defconfigs. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01configs: Resync with savedefconfigTom Rini224-466/+464
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SYS_MONITOR_BASE to KconfigTom Rini76-2/+76
This converts the following to Kconfig: CONFIG_SYS_MONITOR_BASE Note that for how this is re-used on some PowePC platforms, we introduce CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the CONFIG_VAL macro to get the correct value at build time, in the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_NORFLASH_PS32BIT to KconfigTom Rini1-1/+1
This converts the following to Kconfig: CONFIG_NORFLASH_PS32BIT Note that we also attempt to correct the behavior of the code here, which had been testing for "NORFLASH_PS32BIT" which would never be set, instead check for the now set "CONFIG_NORFLASH_PS32BIT", which results in some behavior change. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01at91: Switch to SD_BOOT / CONFIG_NAND_BOOTTom Rini18-28/+16
The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using these switches instead as they're already in Kconfig. Cc: Stelian Pop <stelian@popies.net> Cc: Heiko Schocher <hs@denx.de> Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SRIO_PCIE_BOOT_SLAVE to KconfigTom Rini1-1/+1
This converts the following to Kconfig: CONFIG_SRIO_PCIE_BOOT_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_DEEP_SLEEP to KconfigTom Rini2-0/+2
This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZETom Rini3-5/+0
In the case of M5373EVB we always had NANDFLASH_SIZE=16, so just use it directly. In the case of M5329EVB we had not removed the rest of NAND support when saying we didn't have NAND, so instead use that to key off of rather than NANDFLASH_SIZE. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCKS to KconfigTom Rini40-0/+40
This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCK_SYNTHESIZER to KconfigTom Rini5-0/+5
This converts the following to Kconfig: CONFIG_CLOCK_SYNTHESIZER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SYS_USE_NORFLASH et al to KconfigTom Rini2-2/+2
This converts the following to Kconfig: CONFIG_SYS_USE_NORFLASH CONFIG_SYS_USE_BOOT_NORFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01global: Remove CONFIG_SYS_USE_DATAFLASH*Tom Rini16-16/+0
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none of them now control anything further within their board config.h files, so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty blocks in the board config.h files. In a few places further clean up related logic. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SDCARD et al to KconfigTom Rini37-37/+18
This converts the following to Kconfig: CONFIG_SDCARD CONFIG_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01am43xx_evm_qspiboot: Remove CONFIG_SYS_EXTRA_OPTIONSTom Rini1-1/+0
CONFIG_QSPI is not used in the code, drop this. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01MPC837XERDB: Move CONFIG_PCIE to KconfigTom Rini1-1/+0
Move this symbol to the board Kconfig file. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LPUART et al to KconfigTom Rini6-6/+6
This converts the following to Kconfig: CONFIG_LPUART CONFIG_LPUART_32B_REG And note that CONFIG_LPUART_32B_REG is unused in code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LSCHLV2 to Kconfig et alTom Rini2-2/+2
This converts the following to Kconfig: CONFIG_LSCHLV2 CONFIG_LSXHL Cc: Michael Walle <michael@walle.cc> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Michael Walle <michael@walle.cc>
2022-04-01mpc8548cds: Rework CONFIG_LEGACY usageTom Rini1-1/+1
This CONFIG option is used in one place, so pick a more direct name and migrate to Kconfig. Rework the code slightly. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_KM_COGE5UN et al to KconfigTom Rini6-6/+5
This converts the following to Kconfig: CONFIG_KM_COGE5UN CONFIG_KM_KIRKWOOD_128M16 CONFIG_KM_KIRKWOOD CONFIG_KM_KIRKWOOD_PCI CONFIG_KM_NUSA CONFIG_KM_SUSE2 Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01kmtegr1: Drop CONFIG_KMTEGR1Tom Rini1-1/+0
The only usage of CONFIG_KMTEGR1 can be replaced by CONFIG_TARGET_KMTEGR1 so do so and remove this other symbol. Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01Convert CONFIG_EMMC_BOOT et al to KconfigTom Rini11-11/+1
This converts the following to Kconfig: CONFIG_EMMC_BOOT CONFIG_MAC_ADDR_IN_SPIFLASH CONFIG_NAND_BOOT CONFIG_SPL_FSL_PBL CONFIG_SYS_FSL_DDR4 In this case we re-sync options that had been set in CONFIG_SYS_EXTRA_OPTIONS but should not have been as they have proper entries. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01mx28evk_auart_console: Remove CONFIG_SYS_EXTRA_OPTIONSTom Rini1-1/+0
This was only setting values not referenced in the code so remove it. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to KconfigTom Rini1-1/+0
This platform is the only one to set these options, so define them in the board Kconfig file. Cc: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFRTC et al to KconfigTom Rini5-0/+10
This converts the following to Kconfig: CONFIG_MCFRTC CONFIG_SYS_MCFRTC_BASE While at it, remove '#undef RTC_DEBUG' from these config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFTMR to KconfigTom Rini18-0/+18
This converts the following to Kconfig: CONFIG_MCFTMR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BITBANGMII_MULTI to KconfigTom Rini20-0/+20
This converts the following to Kconfig: CONFIG_BITBANGMII_MULTI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BCM2835_GPIO to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_BCM2835_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Finish converting CONFIG_BOOTM_NETBSD et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD CONFIG_BOOTM_RTEMS CONFIG_DESIGNWARE_WATCHDOG CONFIG_DISPLAY_CPUINFO CONFIG_DM_ETH CONFIG_DM_MMC CONFIG_DM_REGULATOR CONFIG_DM_SPI CONFIG_DM_SPI_FLASH CONFIG_ISO_PARTITION CONFIG_OF_SEPARATE CONFIG_SPI_FLASH_WINBOND CONFIG_SPL_ETH CONFIG_TIMER CONFIG_USB_DWC3 CONFIG_USB_DWC3_GADGET CONFIG_USB_DWC3_OMAP CONFIG_USB_DWC3_PHY_OMAP CONFIG_USB_EHCI_TEGRA CONFIG_USB_GADGET_DOWNLOAD CONFIG_USB_GADGET_DUALSPEED CONFIG_USB_GADGET_MANUFACTURER CONFIG_USB_GADGET_PRODUCT_NUM CONFIG_USB_GADGET_VBUS_DRAW CONFIG_USB_GADGET_VENDOR_NUM This catches a number of cases where board config files were #undef various CONFIG options when building SPL, and that doesn't work. Clean up the related comments as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMERClément Léger7-7/+7
Enable CONFIG_ATMEL_TCB_TIMER and disable CONFIG_ATMEL_PIT_TIMER. This will allow using the TCB timer instead of the PIT one when running under OP-TEE. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-04-01ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dtsEugen Hristev2-2/+2
In Linux this DT file is named at91-sama7g5ek.dts. Rename it accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-03-31configs: sandbox_defconfig: enable stage pre-load in bootmPhilippe Reynes1-0/+3
Enable the support of stage pre-load in bootm. For the moment, this stage allow to verify the signature of the full image with a header. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-28video: Convert CONFIG_VIDEO_BCM2835 to KconfigSimon Glass9-0/+9
This converts the following to Kconfig: CONFIG_VIDEO_BCM2835 This is the final ad-hoc CONFIG_VIDEO_... to convert. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-03-28video: fsl: colibri_vf: Drop FSL DCU driverSimon Glass1-1/+0
This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28Merge tag 'v2022.04-rc5' into nextTom Rini8-10/+153
Prepare v2022.04-rc5
2022-03-28configs: Resync with savedefconfigTom Rini21-106/+63
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_LCD_INFO et al to KconfigTom Rini2-0/+4
This converts the following to Kconfig: CONFIG_LCD_INFO CONFIG_LCD_LOGO CONFIG_LCD_INFO_BELOW_LOGO CONFIG_LCD_IN_PSRAM Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_ATMEL_LCD et al to KconfigTom Rini11-0/+14
This converts the following to Kconfig: CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 CONFIG_GURNARD_SPLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_MII_INIT to KconfigTom Rini13-0/+13
This converts the following to Kconfig: CONFIG_MII_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_PHY_RESET_DELAY to KconfigTom Rini12-0/+12
This converts the following to Kconfig: CONFIG_PHY_RESET_DELAY Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_RX_ETH_BUFFER to KconfigTom Rini41-0/+41
This converts the following to Kconfig: CONFIG_SYS_RX_ETH_BUFFER Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_TFTP_PORT to KconfigTom Rini3-0/+3
This converts the following to Kconfig: CONFIG_TFTP_PORT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_RMII to KconfigTom Rini13-0/+13
This converts the following to Kconfig: CONFIG_RMII Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to KconfigTom Rini56-0/+56
This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_RESET_PHY_R to KconfigTom Rini77-0/+77
This converts the following to Kconfig: CONFIG_RESET_PHY_R Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 10:49:15 +0000