summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini5-4/+117
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini1-1/+6
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21imx8mp_evk: Enable the DWC EQoS iMX driverYe Li1-0/+3
Enable the EQoS i.MX driver in defconfig, also enable the PHYLIB to facilitate the case that only has FEC enabled. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic250-235/+530
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini4-0/+6
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek) - a37xx: pci: Misc smaller fixes (Pali) - cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven) - termios_linux.h: Fix tcsendbreak() implementation (Pali) - mvebu: Add missing "if SPL" (Tom)
2021-10-21arm: mvebu: a3720: Create Kconfig option for I2C_MVMarek Behún4-0/+4
Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21arm: mvebu: turris_mox: Move options to defconfigMarek Behún1-0/+2
Move config options CONFIG_LAST_STAGE_INIT and CONFIG_DISPLAY_BOARDINFO_LATE to turris_mox_defconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21configs: add mkeficapsule to tools-only_defconfigHeinrich Schuchardt1-1/+6
mkeficapsule is used to create capsules for UEFI firmware update. To ease inclusion into U-Boot tools packages of Linux distributions we should add it to the tools-only_defconfig. Provide dummy values for CONFIG_AVB_BUF_ADDR, CONFIG_AVB_BUF_SIZE to satisfy Kconfig. Suggested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-20Merge tag 'u-boot-imx-20211020' of ↵Tom Rini12-5/+451
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed.
2021-10-20colibri-imx6ull: add emmc variantMax Krummenacher2-1/+89
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20board: phytec: imx8mm-phycore: Switch to binmanTeresa Remmet1-1/+1
Use binman for image creation. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20configs: phycore-imx8mm_defconfig: Enable clk commandTeresa Remmet1-0/+1
Enable clk command to dump clock tree. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20board: phytec: phycore-imx8mm: Add SPI-NOR flash supportTeresa Remmet1-0/+19
Adds SPI-NOR flash support to erase, read and write in bootloader. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20verdin-imx8mm: use preboot for fdtfile evaluationIgor Opaniuk1-1/+2
Enable and set preboot var with fdtfile evaluation. It will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: enable sleep_moci outputMax Krummenacher1-0/+1
This powers some peripherals on the carrier board e.g. the USB hub. Related-to: ELB-3206 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler1-1/+1
Use binman to pack images. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-20imx8mm-cl-iot-gate-optee: align config with KconfigStefano Babic1-1/+2
Due to missing configs, CI goes in deadlock until an OOM is tracked. Add CONFIG_SYS_LOAD_ADDR and replace CONFIG_SYS_EXTRA_OPTIONS with CONFIG_IMX_CONFIG. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org> CC: Fabio Estevam <festevam@denx.de>
2021-10-20kontron-sl-mx8mm: fix missing configs and deadlock in CIStefano Babic1-1/+3
Even if board can be successfuly built, CI goes in deadlock (see thread on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html). This is caused by SYS_CONFIG set in header file and because defconfig for the board is out of sync with Kconfig. As result, buildman goes on to read from stdin until an OOM is reached. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Frieder Schrempf <frieder.schrempf@kontron.de>
2021-10-19configs: am335x_evm: enable CONFIG_CLK_TI_CTRLAmjad Ouled-Ameur1-0/+1
This enables the clock controller driver support on TI's SoCs. This will fix this GPIO issue at boot time: request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL request_and_set_gpio: Unable to request GPIO_PHY_RESET This issue comes from the fact that the clock controller is not probed. Enable the TI's clock controller driver support to solve this. Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2021-10-19ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo boardMarek Vasut1-0/+1
Build U-Boot in Thumb2 mode for M53Menlo board, this makes better use of the CPU since the instruction density is higher. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19ARM: imx: mx5: Enable BMODE command on MX53 Menlo boardMarek Vasut1-1/+0
The board can do primary/secondary boot switching, enable the bmode command. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfigRicardo Salveti1-0/+2
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file. It also allows replacing the default CONFIG_BOOTCOMMAND without code modification. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-19smegw01: Select IMX_HABFabio Estevam1-0/+1
Select IMX_HAB to allow secure boot. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19smegw01: Add redundant environment supportFabio Estevam1-1/+3
Add redundant environment support as it is required by SWUpdate. While at it, place the CONFIG_ENV_OFFSET at 0x100000 to allow more headroom. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19apalis-imx6: use dynamic DDR calibrationFrancesco Dolcini1-0/+1
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-19colibri-imx6: use dynamic DDR calibrationFrancesco Dolcini1-0/+1
Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2021-10-18board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boardsIlias Apalodimas2-2/+2
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. So let's remove the option in an effort to simplify U-Boot's config and DTB management, and use OF_BOARD instead. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-18riscv: Remove OF_PRIOR_STAGE from RISC-V boardsIlias Apalodimas10-10/+10
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. On RISC-V some of the boards pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary. So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-17Merge tag 'u-boot-rockchip-20211015' of ↵Tom Rini5-5/+0
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Fix for Rockchip mmc HS400 mode; - Fix for px30 board Odroid Go; - rockchip_sfc update; - rk3568 clk update; - doc fix;
2021-10-15configs: Resync with savedefconfigTom Rini205-215/+17
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15rockchip: rk33xx: Drop ROCKCHIP_USB2_PHY on boards without itPeter Robinson5-5/+0
The 64 bit rk33xx chips don't have the ROCKCHIP_USB2_PHY IP so drop the configs as they were likely copied over from other boards during enablement. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini11-1/+22
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini11-13/+33
The bulk of it is Samuel's DM_I2C rework, which removes the nasty I2C deprecation warnings for most 32-bit boards. It also includes some smaller refactorings that pave the way for more changes, mostly driven by needing to support the Allwinner RISC-V SoC later on. Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board and official Pinetab support. Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3, H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2021-10-12configs: sandbox: add USB_ETHER and GADGET_DOWNLOAD gadget supportPatrice Chotard1-0/+4
This is needed for new gadget binding test. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-12sunxi: video: Convert panel I2C to use DM_I2CSamuel Holland2-9/+0
Two displays supported by the sunxi display driver (each one used by a single board) require initialization over I2C. Both previously used i2c_soft; replace this with the i2c-gpio instance that already exists in those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus). Since the i2c-gpio nodes are not referenced by any other node in the device trees (the device trees have no panel node), the I2C bus is selected by its node name. This panel initialization code was the only i2c_soft user, so the i2c_soft GPIO setup code can be removed now as well. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12i2c: Add a DM_I2C driver for the sun8i RSB controllerSamuel Holland2-2/+2
This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12sunxi: Select SUN8I_RSB more carefullySamuel Holland2-0/+2
SUN8I_RSB should not be selected by MACH_SUN8I, because the hardware is not present in half of those SoCs (H3/H5, R40, and V3s). Move the selection to the SoCs where the hardware actually exists. As it currently stands, selecting that option also requires using it in some way, which is not the case for one A80 board. Since we have only three A80 boards in total, we select it their via their defconfigs. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixing up Sunchip_CX-A99 build] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11board: siemens: iot2050: Adjust to changes in DT and configurationJan Kiszka1-2/+4
Account for the changes done between merge proposal and the final merge. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-11configs: omap3x_logic: Enable LTO on more LogicPD OMAP3 boardsAdam Ford3-0/+3
There are five omap3 based boards from LogicPD. Two of them have added LTO support. Add the remaining three to use LTO. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-11sunxi: Add support for FriendlyARM NanoPi R1S H5Chukun Pan1-0/+14
This adds support for the NanoPi R1S H5 board. Allwinner H5 SoC 512MB DDR3 RAM 10/100/1000M Ethernet x 2 RTL8189ETV WiFi 802.11b/g/n USB 2.0 host port (A) MicroSD Slot Reset button Serial Debug Port WAN - LAN - SYS LED The dts file is taken from Linux 5.14 tag. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11pinephone_defconfig: add support for early-boot status LEDArnaud Ferraris1-0/+6
This commit enables the green status LED (PD18/GPIO 114) on boot in the SPL, in order to provide visual feedback that the PinePhone is booting. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11sunxi: Simplify MMC pinmux selectionSamuel Holland4-4/+1
Only one board, Yones Toptech BD1078, actually uses a non-default MMC pinmux. All other uses of these symbols select the default value or an invalid value. To simplify things, remove support for the unused pinmux options, and convert the remaining option to a Boolean. This allows the pinmux to be chosen by the preprocessor, instead of having the code parse a string at runtime (for a build-time option!). Not only does this reduce code size, but it also allows this Kconfig option to be used in a table-driven DM pinctrl driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11configs: add PineTab defconfigArnaud Ferraris1-0/+10
The PineTab device-tree is already in u-boot, this commit adds the corresponding defconfig, based on pinephone_defconfig. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-09video: move MXS to KconfigAnatolij Gustschin9-0/+9
Move CONFIG_VIDEO_MXS from board headers to Kconfig and drop it from obsolete cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-08image: Update image_decomp() to avoid ifdefsSimon Glass1-0/+1
Adjust this function so that preprocessor macros are not needed. With this, the host build uses more of the same header files as the target build. Rather than definining CONFIG_SYS_MALLOC_LEN, add a CONSERVE_MEMORY define, since that is the purpose of the value. This appears to have no impact on code size from a spot check of a few boards (snow, firefly-rk3288, boston32r2el, m53menlo). Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08stv0991: remove specific CONFIG_STV0991 configsPatrick Delaunay1-1/+0
Remove the following STV0991 specific configs: - CONFIG_STV0991 (never used, only defined in CONFIG_SYS_EXTRA_OPTIONS) - CONFIG_STV0991_HZ (replaced by generic CONFIG_SYS_HZ) - CONFIG_STV0991_HZ_CLOCK (replaced by generic CONFIG_SYS_HZ_CLOCK) This patch allows to reduce the file config_whitelist.txt. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08stm32f429: move CONFIG_BOOTCOMMAND in defconfigPatrick Delaunay1-0/+1
Move CONFIG_BOOTCOMMAND defined in Kconfig in the board defconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08configs: Move some usb config in defconfigPatrick Delaunay4-0/+12
Using the tools moveconfig.py to move the following config in the defconfig files: CONFIG_USB_HOST_ETHER CONFIG_USB_ETHER_ASIX CONFIG_USB_ETHER_MCS7830 CONFIG_USB_ETHER_SMSC95XX These option are already migrated since the commit f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig") and the commit ae3584498bf8 ("usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig"). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Ian Ray <ian.ray@ge.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08Convert CONFIG_STM32_FLASH to KconfigPatrick Delaunay5-0/+5
This converts the CONFIG_STM32_FLASH to Kconfig by using tools/moveconfig.py Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-07imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards ↵Frieder Schrempf1-0/+140
(N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 21:30:25 +0000