summaryrefslogtreecommitdiff
path: root/configs/imx8mp_evk_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-11-01configs: Resync with savedefconfigTom Rini1-3/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-21imx8mp_evk: Enable the DWC EQoS iMX driverYe Li1-0/+3
Enable the EQoS i.MX driver in defconfig, also enable the PHYLIB to facilitate the case that only has FEC enabled. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-09-04i2c: Convert CONFIG_POWER_I2C et al to KconfigSimon Glass1-0/+2
This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini1-1/+0
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini1-0/+1
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini1-0/+1
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-28configs: Resync with savedefconfigTom Rini1-8/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-21imx8mp: configs: enable distro default featuresAndrey Zhizhikin1-2/+1
imx8mp ekv has been switched to use distro boot commands, but had no correct options enabled to support sysboot. According to the README.distro, sysboot is consindered to be a recommended way of using distro boot commands, it required default distro features to be enabled instead of only those that are relevant to the boot script. Replace the boot script specific options in the config to a default distro option. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Fixes: 9b162b1d1f ("imx8mp: configs: add support for distro boot commands") Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-05-11configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-08imx8mp-evk: switch to use binmanPeng Fan1-2/+2
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-02-21board: freescale: drop CONFIG_DM_I2C undefsIgor Opaniuk1-0/+1
Drop CONFIG_DM_I2C undefs from board header files, and make them disabled on these boards in defconfigs instead. Disabling on Kconfig symbol was done automatically with this script: cd configs files=(*ls1046a*) files2=(*T104*RDB*) files3=(ls1021atwr_*) files4=("imx8mp_evk_defconfig phycore-imx8mp_defconfig") combine=("${files[@]}" "${files2[@]}" "${files3[@]}" "${files4[@]}") cd .. for item in ${combine[*]} do echo "Adjusting $item" echo "# CONFIG_SPL_DM_I2C is not set" >> configs/$item make $item && make savedefconfig && cp defconfig configs/$item done Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-01-29configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23imx8mp: configs: add support for distro boot commandsAlice Guo1-0/+2
Supported boot device types in iMX8MP: MMC. CONFIG_CMD_PART is added for command part and CONFIG_CMD_FS_GENERIC is for command fstype. scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be loaded to prior to execution. kernel_addr_r is the location in RAM where the kernel will be loaded to. Delete unnecessary environment variables because "run distro_bootcmd" is set to be the default boot mode. On the iMX8MP platform I used, "mmc1" represents SD card and "mmc2" represents eMMC. Signed-off-by: Alice Guo <alice.guo@nxp.com>
2021-01-23imx: imx8mp_evk: enable eth supportPeng Fan1-1/+8
Add board code to configure the network interface Add net defconfig Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-12-26imx8mp_evk: Increase CONFIG_SYS_MALLOC_F_LENFabio Estevam1-1/+1
When booting imx8mp-evk the following allocation error message is seen: U-Boot 2021.01-rc3-00200-ge668bec96a5f (Dec 21 2020 - 14:36:42 -0300) alloc space exhausted Fix it by increasing CONFIG_SYS_MALLOC_F_LEN to 0x10000 like it is done on other i.MX8MM/8MN boards. Reported-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26configs: imx8m: enable eMMC HS400ES and SD UHS mode on EVKAndrey Zhizhikin1-0/+3
i.MX8M series includes support for high speed modes in uSDHC controllers. Turn on corresponding configuration options for EVK boards, which would enable high speed modes to be included in U-Boot. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-10-09configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-14imx8m: Refactor the OPTEE memory removalPeng Fan1-1/+0
Current codes assume the OPTEE address is at the end of first DRAM bank. Adjust the process to allow OPTEE in the middle of first bank. When OPTEE memory is removed from first bank, it may split the first bank to two banks, adjust the MMU table for the split case, Since the default CONFIG_NR_DRAM_BANKS is 4, it is enough, just enlarge i.MX8MP evk to default to avoid issue. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com> Tested-by: Silvano di Ninno <silvano.dininno@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-06configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-23configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-08imx: imx8mp_evk: fix boot issuePeng Fan1-1/+2
The u-boot-spl.bin pad with ddr firmware conflicts with the CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten by malloc in SPL stage and cause ddr initialization not able to finish. So update the related addresses to fix the issue. Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08imx8mp_evk: Select the watchdog driverFabio Estevam1-1/+0
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-05-01ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVKMarek Vasut1-0/+4
Board files should not re-implement do_reset() to work around this function not being defined in for specific configurations. Rather, the fix is to compile in drivers which implement this properly. This patch enables sysreset and watchdog drivers in SPL and ties them together to implement the same as the do_reset() hack in the board file, except correctly in the DM/DT framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: Harald Seiler <hws@denx.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-05-01imx8: Run SPL with caches enabledFabio Estevam1-2/+0
It is safe to run SPL with caches enabled on i.MX8, so remove such restriction. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-04-28configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22configs: Resync with savedefconfigTom Rini1-5/+5
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-08imx: add i.MX8MP EVK boardPeng Fan1-0/+84
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 10:39:41 +0000