summaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)AuthorFilesLines
2022-12-23global: Remove undef CONFIG_... for unused valuesTom Rini1-1/+0
We have a number of places that undef CONFIG_... while we never reference CONFIG_... in the first place. Remove these lines. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21usb: Update USB_STORAGE dependenciesTom Rini1-1/+1
As it's no longer possible to have !DM_USB set, we can remove these dependencies. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini2-3/+3
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-10spl: spl_legacy: fix invalid offset in SPL_COPY_PAYLOAD_ONLYDai Okamura1-2/+2
This fixes the header offset calculation. This issue was found on uniphier v7 SoCs with SPL. Fixes: 06377c5a1f ("spl: spl_legacy: Fix NAND boot on OMAP3 BeagleBoard") Signed-off-by: Dai Okamura <okamura.dai@socionext.com> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221209114021.3074978-1-okamura.dai@socionext.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-08common/spl/Kconfig: add dependency on SPL_SEMIHOSTING for SPL payloadKautuk Consul1-1/+1
When we enable CONFIG_SPL and CONFIG_SPL_SEMIHOSTING then the code in common/spl/spl_semihosting.c tries to use the CONFIG_SPL_FS_LOAD_PAYLOAD_NAME string which remains undeclared unless SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS are configured. Add a dependency of SPL_SEMIHOSTING in the depends for SPL_FS_LOAD_PAYLOAD_NAME so that the code compiles fine. Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-05sandbox: Move CONFIG_IO_TRACE to KconfigTom Rini1-0/+3
This is only used on sandbox, so select it there. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_HWCONFIG to KconfigTom Rini1-0/+4
This converts the following to Kconfig: CONFIG_HWCONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini9-19/+19
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini1-4/+4
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05spl: Migrate SYS_SATA_FAT_BOOT_PARTITION to KconfigTom Rini2-4/+5
This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the current default via Kconfig rather than C code. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*Tom Rini1-2/+2
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*Tom Rini1-4/+4
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-02console: file should always be non-negativeHeinrich Schuchardt1-5/+5
We use the parameter file in console functions to choose from an array after checking against MAX_FILES but we never check if the value of file is negative. Running ./u-boot -T -l and issuing the poweroff command has resulted in crashes because os_exit() results in std::ostream::flush() calling U-Boot's fflush with file being a pointer which when converted to int may be represented by a negative number. This shows that checking against MAX_FILES is not enough. We have to ensure that the file argument is always positive. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-21spl: Fix SPL_ATF and SPL_OPENSBI dependenciesSamuel Holland1-1/+3
The code for these two options depends on having the FIT loadables recorded in the FDT. Thus, these options require the full version of the SPL_LOAD_FIT code. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-11-21Revert "cli_readline: Only insert printable chars"Pali Rohár1-4/+2
This reverts commit d2e64d29c44dee6d455f7705dd1cf1af8674ad9a. This commit broke support for pound sign (£) and euro sign (€) keys on Nokia N900 keypad. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10SYS_NONCACHED_MEMORY: Correct comment in common/board_f.cTom Rini1-2/+2
The comment block in reserve_noncached has a typo in one filename and an incorrect filename in another function reference. Correct both of these. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini1-4/+7
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-06Merge tag 'efi-2023-01-rc1-4' of ↵Tom Rini1-1/+1
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-01-rc1-4 Documentation: * Provide a document about security issue handling. UEFI: * Let networking support depend on NETDEVICES. * Discover if no efi_system_partition is set. Other: * MAINTAINERS: add arch/arm/lib/*_efi.* to EFI_PAYLOAD.
2022-11-06efi_loader: remove CONFIG_EFI_SETUP_EARLYAKASHI Takahiro1-1/+1
Since the commit a9bf024b2933 ("efi_loader: disk: a helper function to create efi_disk objects from udevice"), CONFIG_EFI_SETUP_EARLY option is by default on and will never be turned off. So just remove this option. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-04Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini2-0/+12
- 3 important fixes
2022-11-04usb: storage: continue probe on "Invalid device"Janne Grunau1-0/+1
Fixes a crash during probing of sd card readers without medium present. Seen with the device below but reported for many other devices. idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x0326 Card reader bcdDevice 11.24 iManufacturer 1 Realtek iProduct 2 USB3.0 Card Reader iSerial 3 201404081410 Link: https://github.com/AsahiLinux/linux/issues/44 Link: https://lists.denx.de/pipermail/u-boot/2022-July/489717.html Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2022-11-03usb: Add 1ms delay after first Get Descriptor requestMarek Vasut1-0/+11
Logitech Unifying Receiver 046d:c52b bcdDevice 12.10 seems sensitive about the first Get Descriptor request. If there are any other requests in the same microframe, the device reports bogus data, first of the descriptor parts is not sent to the host. Wait over one microframe duration before issuing subsequent requests to avoid probe failure with this device, since it can be used to connect USB keyboards. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Janne Grunau <j@jannau.net>
2022-11-02mips: mtmips: spl/Kconfig: Set CONFIG_SPL_PAD_TO to 0x0 for ARCH_MTMIPSStefan Roese1-0/+1
It was noticed that while converting CONFIG_SPL_PAD_TO to Kconfig its value for the MIPS MT762x/8x targets got not ported correctly. Its default is not 0x10000 instead of 0x0. This patch fixes this issue. Fixes: ca8a329a1b7f ("Convert CONFIG_SPL_PAD_TO et al to Kconfig") Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ruben Winters <Ruben.Winters@gooiland-elektro.nl> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2022-11-02cyclic: get rid of cyclic_init()Rasmus Villemoes3-27/+17
Currently, we must call cyclic_init() at some point before cyclic_register() becomes possible. That turns out to be somewhat awkward, especially with SPL, and has resulted in a watchdog callback not being registered, thus causing the board to prematurely reset. We already rely on gd->cyclic reliably being set to NULL by the asm code that clears all of gd. Now that the cyclic list is a hlist, and thus an empty list is represented by a NULL head pointer, and struct cyclic_drv has no other members, we can just as well drop a level of indirection and put the hlist_head directly in struct global_data. This doesn't increase the size of struct global_data, gets rid of an early malloc(), and generates slightly smaller code. But primarily, this avoids having to call cyclic_init() early; the cyclic infrastructure is simply ready to register callbacks as soon as we enter C code. We can still end up with schedule() being called from asm very early, so we still need to check that gd itself has been properly initialized [*], but once it has, gd->cyclic_list is perfectly fine to access, and will just be an empty list. As for cyclic_uninit(), it was never really the opposite of cyclic_init() since it didn't free the struct cyclic_drv nor set gd->cyclic to NULL. Rename it to cyclic_unregister_all() and use that in test/, and also insert a call at the end of the board_init_f sequence so that gd->cyclic_list is a fresh empty list before we enter board_init_r(). A small piece of ugliness is that I had to add a cast in cyclic_get_list() to silence a "discards 'volatile' qualifier" warning, but that is completely equivalent to the existing handling of the uclass_root_s list_head member. [*] I'm not really sure where we guarantee that the register used for gd contains 0 until it gets explicitly initialized, but that must be the case, otherwise testing gd for being NULL would not make much sense. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02cyclic: switch to using hlist instead of listRasmus Villemoes1-8/+10
A hlist is headed by just a single pointer, so can only be traversed forwards, and insertions can only happen at the head (or before/after an existing list member). But each list node still consists of two pointers, so arbitrary elements can still be removed in O(1). This is precisely what we need for the cyclic_list - we never need to traverse it backwards, and the order the callbacks appear in the list should really not matter. One advantage, and the main reason for doing this switch, is that an empty list is represented by a NULL head pointer, so unlike a list_head, it does not need separate C code to initialize - a memset(,0,) of the containing structure is sufficient. This is mostly mechanical: - The iterators are updated with an h prefix, and the type of the temporary variable changed to struct hlist_node*. - Adding/removing is now just hlist_add_head (and not tail) and hlist_del(). - struct members and function return values updated. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02cyclic: drop redundant cyclic_ready flagRasmus Villemoes1-4/+2
We're already relying on gd->cyclic being NULL before cyclic_init() is called - i.e., we're relying on all of gd being zeroed before entering any C code. And when we do populate gd->cyclic, its ->cyclic_ready member is automatically set to true. So we can actually just rely on testing gd->cyclic itself. The only wrinkle is that cyclic_uninit() actually did set ->cyclic_ready to false. However, since it doesn't free gd->cyclic, the cyclic infrastructure is actually still ready (i.e., the list_head is properly initialized as an empty list). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02cyclic: use a flag in gd->flags for recursion protectionRasmus Villemoes1-3/+3
As a preparation for future patches, use a flag in gd->flags rather than a separate member in (the singleton) struct cyclic_drv to keep track of whether we're already inside cyclic_run(). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-10-31event: Add an event for main_loopSughosh Ganu2-0/+6
Add an event type EVT_MAIN_LOOP that can be used for registering events that need to be run after the platform has been initialised and before the main_loop function is called. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-31vpl: Allow signature verificationSimon Glass1-0/+7
Add the required Kconfig option so that signatures can be verified when loading a configuration. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31vbe: Add Kconfig options for VPLSimon Glass1-0/+30
Enable the various features needed in VPL, by adding Kconfig options. Update the defconfig for sandbox_vpl so that the build for each phase includes what is needed. Drop LZMA for now and make sure partition support is omitted in SPL, since it is not needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31spl: Allow multiple loaders of the same timeSimon Glass1-31/+25
At present we only support a single loader of each time. Extra ones are ignored. This means that only one BOOT_DEVICE_BOARD can be used in the SPL image. This is inconvenient since we sometimes want to provide several board-specific drivers, albeit at different priorties. Add support for this. This should have no functional change for existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31bloblist: Drop debuggingSimon Glass1-1/+0
Disable debugging by default since this implementation is stable now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31spl: Add a separate silence option for SPLSimon Glass2-1/+23
Add an option to allow silent console to be controlled separately in SPL, so that boot progress can be shown. Disable it by default for sandbox since it is useful to see what is going on there. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31spl: Refactor controls for console outputSimon Glass1-3/+1
The expression in boot_from_devices() is fairly long and appears to be an artefact from before we could easily call printf(...) and have the call be nop'd out. So update it to just check CONFIG_SILENT_CONSOLE. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com>
2022-10-31spl: Use binman suffix allow symbols of any SPL etypeSimon Glass1-8/+8
At present we use symbols for the u-boot-spl entry, but this is not always what we want. For example, sandbox actually jumps to a u-boot-spl-elf entry, since sandbox executables are ELF files. We already handle this with U-Boot by using the '-any' suffix. Add it for SPL as well. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass7-19/+19
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass5-8/+8
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop common LCD implementationSimon Glass3-750/+0
This code is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop use of the lcd header fileSimon Glass1-3/+2
This file is being removed so drop remaining references to it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30fdt: Drop support for LCD fixup in simplefbSimon Glass1-8/+0
This relies on the old LCD implementation which is to be removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop remaining references to CONFIG_LCDSimon Glass1-3/+0
These rely on the old LCD implementation which is to be removed. Drop it all. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: cmd: Drop old LCD codeSimon Glass2-45/+11
This relies on the old LCD implementation which is to be removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop VCXK video controllerSimon Glass1-2/+0
This relies on the old LCD implementation which is to be removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30Drop CONFIG_LCD_LOGOSimon Glass2-74/+0
This relies on the old LCD implementation which is to be removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop CONFIG_LCD_INFOSimon Glass1-5/+0
This option is not used anymore since the LCD implementation is being removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop CONFIG_LCD_INFO_BELOW_LOGOSimon Glass2-6/+2
This option is not used anymore since the LCD implementation is being removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop CONFIG_LCD_ALIGNMENTSimon Glass1-8/+0
This option is not needed now that the LCD implementation is being removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: lcd: Drop console rotationSimon Glass2-195/+0
This option is not used in U-Boot anymore. Drop it option and the associated implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30splash: get devpart from environment variableJulien Masson1-0/+5
By default several types of splash locations are supported and the user can select one of them through environment var (splashsource). However the devpart is still hardcoded and we cannot change it from the environment. This patch add the support of "splashdevpart" which allow the user to set the devpart though this environment variable. Example: image located in splashscreen partition (MMC as raw) ``` splashsource=mmc_raw splashdevpart=0#splashscreen ``` Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-30splash: support raw image from MMCJulien Masson2-0/+32
The user has now the choice to specify the splash location in the MMC as a raw storage. Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 06:11:22 +0000