summaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03xyz-modem: Show information about finished transferPali Rohár1-0/+16
Show "## Start Addr" or "## Binary (...) download aborted" information like in Kermit "loadb" command. Signed-off-by: Pali Rohár <pali@kernel.org>
2021-09-03xyz-modem: Properly abort/terminate transfer on errorPali Rohár1-1/+13
Transfer termination tries to instruct sender that transfer was terminated. Print error message and indicates aborted transfer in return value. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-03xyz-modem: Close stream after processing/sending terminate sequencePali Rohár1-1/+1
Obviously it is not possible to send terminate sequence over stream after closing stream. Signed-off-by: Pali Rohár <pali@kernel.org>
2021-09-01loadb: Properly indicate aborted kermit transferPali Rohár1-0/+3
When k_recv() returns zero it indicates that kermit transfer was aborted. Function do_load_serial_bin() (caller of load_serial_bin()) interprets value ~0 as aborted transfer, so properly propagates information about aborted transfer from k_recv() to do_load_serial_bin(). Signed-off-by: Pali Rohár <pali@kernel.org>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek2-10/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDRTom Rini1-5/+1
All platforms define CONFIG_SYS_LOAD_ADDR, but only some define CONFIG_LOADADDR. Very very rarely are these not the same address, and qemu-ppce500 is one such case. However, based on reading the history of the code, this mismatched value was simply a copy-paste from other PowerPC platforms where it is this unused currently. Switch the code to use CONFIG_SYS_LOAD_ADDR and update the documentation. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-30Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30cmd/i2c.c: Remove unused legacy codeTom Rini1-50/+0
There are no longer any cases where we are neither SYS_I2C_LEGACY nor DM_I2C. Remove these code paths. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini3-15/+15
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini3-26/+44
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usageTom Rini1-5/+4
At this point in time, there's no systems with "U-Boot environment exists on an EEPROM which is accessed over the I2C bus" that sets this option. Drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-27Merge tag 'xilinx-for-v2021.10-rc3' of ↵Tom Rini3-7/+12
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()
2021-08-26cmd: boot: Update reset usage messageMichal Simek1-1/+2
The commit 573a3811edc8 ("sysreset: psci: support system reset in a generic way with PSCI") has added support for warm reset via PSCI but this hasn't been reflected in usage message and user has to look at the code how to run it. That's why update usage text to make this clear. Here is full help with updated usage: ZynqMP> help reset reset - Perform RESET of the CPU Usage: reset - cold boot without level specifier reset -w - warm reset if implemented Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-08-26cmd: pwm: Remove additional pwm descriptionMichal Simek1-3/+4
The first name is taken from command name that's why shouldn't be listed in help. And commands shouldn't be listed with <> which means value but value itself is command name. Also add description for commands to make it clear what it does. Before pwm pwm <invert> <pwm_dev_num> <channel> <polarity> pwm <config> <pwm_dev_num> <channel> <period_ns> <duty_ns> ... After: pwm invert <pwm_dev_num> <channel> <polarity> - invert polarity pwm config <pwm_dev_num> <channel> <period_ns> <duty_ns> - config PWM pwm enable <pwm_dev_num> <channel> - enable PWM output pwm disable <pwm_dev_num> <channel> - disable PWM output Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-06cmd: date: rtc: Update command to read the first RTC with seq 0Michal Simek1-3/+6
RTCs are using sequence number defined in aliases node. Date command with DM_RTC enabled is looking for the first RTC with index 0. But when RTC_EMULATION is enabled it gets likely most of the time index 0 even when system has rtc0 device via aliases node and gets sequence number 0. That's why extend the code to look for sequence 0 number first. If this fails continue to use existing device with index 0. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-05pci: Drop old code from pci commandSimon Glass1-212/+0
Drop the pre-driver model code from this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-04cmd:(cosmetic)Mentioned in 'chpart' command HELP text that it is for MTD devicesAdarsh Babu Kalepalli1-2/+2
Modified the help text of 'chpart' command ,mentioning that it is for MTD devices. Signed-off-by: Adarsh Babu Kalepalli <opensource.kab@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-04cmd:Elaborate 'blkcache' cmd HELP statementAdarsh Babu Kalepalli1-1/+2
HELP description is provided for ‘configure’ sub-command of ‘blkcache’. Signed-off-by: Adarsh Babu Kalepalli <opensource.kab@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini1-5/+4
- Fixed broken ICH SPI driver in software sequencer mode - Added "m25p,fast-read" to SPI flash node for x86 boards - Drop ROM_NEEDS_BLOBS and BUILD_ROM for x86 ROM builds - Define a default TSC timer frequency for all x86 boards - x86 MTRR MSR programming codes bug fixes - x86 "hob" command bug fixes - Don't program MTRR for DRAM for FSP1 - Move INIT_PHASE_END_FIRMWARE to FSP2 - Use external graphics card by default on Intel Crown Bay - tangier: Fix DMA controller IRQ polarity in CSRT
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass41-95/+95
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass85-384/+385
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02x86: cmd: hob: Fix display of resource type for system memoryBin Meng1-1/+1
The resource type for system memory is currently displayed as "unknown", which is wrong. Fixes: 51af144eb7a0 ("x86: Allow showing details about a HOB entry") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax Tested-by: Simon Glass <sjg@chromium.org>
2021-08-02x86: cmd: hob: Fix the command usage and help messagesBin Meng1-4/+3
At present the hob command usage and help messages are messed up in a single line. They should be separated. This was a regression introduced when [seq] and [-v] were added to the command. Fixes: d11544dfa9f4 ("x86: hob: Add way to show a single hob entry") Fixes: 51af144eb7a0 ("x86: Allow showing details about a HOB entry") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on chromebook_coral, chromebook_samus, chromebook_link, minnowmax Tested-by: Simon Glass <sjg@chromium.org>
2021-08-01fdt: Show the type of devicetree with fdt addrSimon Glass1-2/+3
It seems useful to show whether the address of the Control or Working devicetree is being shown. Add support for this. Drop the confusing 0x prefix since the command itself only accepts hex. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01fdt: Tidy up the code a bit with fdt addrSimon Glass1-24/+13
Clean up the code a little before changing it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass3-15/+15
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-27cmd: setexpr: add format string handlingRoland Gaudig5-178/+295
Add format string handling operator to the setexpr command. It allows to use C or Bash like format string expressions to be evaluated with the result being stored inside the environment variable name. setexpr <name> fmt <format> [value]... The following example setexpr foo fmt "%d, 0x%x" 0x100 ff will result in $foo being set to "256, 0xff". Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-27cmd: printf: add helper functions from busyboxRoland Gaudig1-0/+121
Import the following helper functions from Busybox-1.33.1 which are required by printf.c: process_escape_sequence from libbb/process_escape_sequence.c, skip_whitespace from libbb/skip_whitespace.c, overlapping_strcpy from libbb/safe_strncpy.c src-url: https://git.busybox.net/busybox/ commit bcc5b0e6caca6c7602a6a41f "Bump version to 1.33.1" version: 1.33.1 Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com>
2021-07-27cmd: printf: import busybox-1.33.1 printf.cRoland Gaudig1-0/+455
Import printf.c from the Busybox project, which provides Bash like format string handling. src-url: https://git.busybox.net/busybox/ commit bcc5b0e6caca6c7602a6a41f "Bump version to 1.33.1" version: 1.33.1 Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com>
2021-07-23command: Fix SMC and HVC maximum number of argumentsSiew Chin Lim1-3/+3
smc and hvc commands take upto 8 user input arguments, the maximum number of arguments of the U_BOOT_CMD macro should set to 9. Besides, fix the typo (arg7 -> arg6) in hvc command's help message. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23cmd: part: Correct error handlingAnders Dellien1-1/+1
As 'part_get_info_by_name' now returns more status codes than just -1 to indicate failure, we need to update the return value check. Signed-off-by: Anders Dellien <anders.dellien@arm.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2021-07-23cmd: pinmux: support pin name in status commandPatrick Delaunay1-9/+37
Allow pin name parameter for pimux staus command, as gpio command to get status of one pin. The possible usage of the command is: > pinmux dev pinctrl > pinmux status > pinmux status -a > pinmux status <pin-name> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23cmd: pinmux: update result of do_statusPatrick Delaunay1-14/+17
Update the result of do_status and always returns a CMD_RET_ value (-ENOSYS was a possible result of show_pinmux). This patch also adds pincontrol name in error messages (dev->name) and treats correctly the status sub command when pin-controller device is not selected. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USBTom Rini1-1/+1
As the logic here is only used when we have a USB host controller, test on CONFIG_USB_HOST rather than CONFIG_USB in general. This lets us move towards using CONFIG_USB only as a menu symbol to say that we have some form of USB, and then USB_HOST or USB_GADGET depending on the role that USB plays within the build. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07usb: Add correct depends for CMD_USB_MASS_STORAGETom Rini1-0/+1
We cannot build this without USB_GADGET_DOWNLOAD support enabled, add the appropriate depends line. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-06cmd: net: add a 'net list' command to list network devsTim Harvey1-0/+46
In a system with multiple network controllers it can be difficult to know the names of the various devices available. This is especially true for USB ether devices as they do not display device names upon detection. This is being added as a net sub-system in case other commands may want to be added or moved here. Note that this is only enabled for DM_ETH Example: U-Boot > net net - NET sub-system Usage: net list - list available devices U-Boot > net list eth0 : ethernet@2188000 00:d0:12:98:f5:47 active eth1 : e1000#0 00:d0:12:98:f5:48 eth2 : asix_eth 8c:ae:4c:f5:84:9d eth3 : asix_eth 8c:ae:4c:f9:41:e3 Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-05env: efi: fix a wrong address dereferenceAKASHI Takahiro1-2/+1
Probably, a pointer to a variable in an inner block should not be exposed to an outer block. Fixes: c70f44817d46 ("efi_loader: simplify 'printenv -e'") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> [trini: Don't make guid const now] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-05Merge branch 'next'Tom Rini5-11/+272
2021-06-30Revert "TEST: USB_HOST not USB"Tom Rini1-1/+1
This reverts commit 4e1903a645453deab5ec5dd1cf4f0061469b99c3. This local commit was not intended to be pushed out. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-30TEST: USB_HOST not USBTom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28Merge tag 'v2021.07-rc5' into nextTom Rini3-6/+21
Prepare v2021.07-rc5 # gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # configs/am64x_evm_r5_defconfig
2021-06-28efidebug: correct display of BootOrderHeinrich Schuchardt1-1/+1
Display the number of the boot option and not its index. Fixes: 2ecee31017bf ("efi_loader: use efi_create_indexed_name()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-06-24cmd: mtd: expand <name> argument definition in command helpMarek Behún1-1/+1
The <name> argument can now also be MTD's DM device name or OF path. Mention this is command help. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24cmd: mtd: print device OF path in listingMarek Behún1-0/+7
Print MTD's device OF path in the output of `mtd list` command. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-22mmc: Update environment variable with active partitionReuben Dowle1-5/+9
This patch allows uboot scripts make choices about where to boot from based on the active mmc boot partition. This allows having two copies of kernel, filesystems etc, and choosing which to boot from based off of the active bootloader partition. Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-18cmd: pxe_utils: sysboot: fix crash if either board or soc are not set.Dimitri John Ledkov1-0/+8
If the environment does not have "soc" or "board" set, and fdtdir option is specified in extlinux.conf, the bootloader will crash whilst dereferencing a null pointer. Add a guard against null soc or board. Fixes a crash of qemu-riscv64_smode configuration, which does not have CONFIG_SYS_SOC defined. Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-11cmd: ti: pd: Add debug command for K3 power domainsTero Kristo3-0/+194
Add support command for debugging K3 power domains. This is useful with the HSM rearch setup, where power domains are directly controlled by SPL instead of going through the TI SCI layer. The debugging support is only available in the u-boot codebase though, so the raw register access power domain layer must be enabled on u-boot side for this to work. By default, u-boot side uses the TI SCI layer, and R5 SPL only uses the direct access methods. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <kristo@kernel.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-11clk: add support for setting clk rate from cmdlineTero Kristo1-2/+51
Add new clk subcommand "clk setfreq", for setting up a clock rate directly from u-boot cmdline. This is handy for any debugging purposes towards clocks. Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-11clk: fix clock tree dump to properly dump out every registered clockTero Kristo1-8/+19
Some clocks are not associated to a DM node, so just parsing the DM is not enough. This is especially true for root clocks, which typically don't have any parents. Instead, fetch every registered UCLASS_CLK instance, and dump these out. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <kristo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 01:40:43 +0000