summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2022-01-08udoo: Call gpio_request()Fabio Estevam1-0/+8
Calling gpio_request() prior to its usage is now mandatory. This fixes the following GPIO errors: U-Boot SPL 2022.01-rc3-00067-g7a5be871c0ec (Dec 18 2021 - 17:45:07 -0300) Trying to boot from MMC1 U-Boot 2022.01-rc3-00067-g7a5be871c0ec (Dec 18 2021 - 17:45:07 -0300) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: WDOG Model: Udoo i.MX6 Quad Board Board: Udoo Quad DRAM: 1 GiB MMC: FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial gpio@20a0000: set_dir_flags: error: gpio GPIO2_31 not reserved gpio@20a4000: set_dir_flags: error: gpio GPIO3_23 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_24 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_25 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_27 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_28 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_29 not reserved gpio@20a4000: set_value: error: gpio GPIO3_23 not reserved Net: Could not get PHY for FEC0: addr -2 No ethernet found. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-08udoo_spl: Initialize the eSDHC controller in SPLFabio Estevam1-0/+35
Currently, imx6q udoo board fails to boot like this: U-Boot SPL 2022.01-rc3-00061-g95ca715adad3 (Dec 18 2021 - 18:04:40 -0300) Trying to boot from MMC1 The reason is that the eSDHC controller is not initialized in SPL. Initialize the eSDHC controller in SPL via C code as DM is not used in SPL. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-07imx8mm_venice: switch to use binman to pack imagesTim Harvey3-3/+11
Use binman to pack images. Note that imx8mm_venice supports several boards via multiple DTB's thus in the fit node we must use: - fit,fdt-list = "of-list" - fdt-SEQ - config-SEQ Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx8mm-cl-iot-gate: fix imximage intermediate binary namingMarcel Ziswiler1-1/+1
This fixes the following build time issue: ... BINMAN all binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000 ./mkimage-out.spl.mkimage': mkimage.flash.mkimage: Can't open: No such file or directory make: *** [Makefile:1094: all] Error 1 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07imx: imx8mq use common imximage.cfgPeng Fan6-36/+3
After all these board switch to binman, we could use common imximage.cfg Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-01-07imx: pico-imx8mq: switch to use binmanPeng Fan2-1/+12
Switch to use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-01-07imx: imx8mq_phanbell: switch to binmanPeng Fan2-1/+12
Switch to binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-01-07imx: imx8mq_evk: switch to binmanPeng Fan2-1/+12
Switch to use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-01-07imx8mn_beacon: Fix booting hang and switch to binmanAdam Ford2-1/+11
Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx8mm_beacon: Switch to binman for generating imageAdam Ford3-4/+13
To eliminate a warning when using custom imx tools for generating a binary, use binman to generate flash.bin. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07udoo: neo: Do not print the Model informationFabio Estevam1-1/+2
By default the Model information from DT is printed: CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 63C Reset cause: POR Model: UDOO Neo Basic Board: UDOO Neo FULL I2C: ready As the udoo basic DT is used, such output may be confusing. Improve it by only printing the Board model instead, which is read from the board identification GPIOs. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Tommaso Merciai <tomm.merciai@gmail.com> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
2022-01-07udoo: neo: Fix the board model printingFabio Estevam1-41/+50
Currently, the board model is not printed correctly: Board: UDOO Neo UNDEFINED Read the model type in SPL and store it the internal OCRAM, so that U-Boot proper can retrieve it correctly. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fix ethernetPeter Robinson1-1/+2
The ethernet has a RMII not RGMII, also needs DM_MDIO and finally initialise it later in the process as it's not needed that early on and not everything is ready so it locks up the device. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fixes for booting from the mSD cardPeter Robinson1-0/+40
This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Call gpio_request()Peter Robinson1-0/+4
Calling gpio_request() prior to its usage is now mandatory. This fixes the following GPIO errors: gpio@20a8000: set_dir_flags: error: gpio GPIO4_16 not reserved gpio@20a8000: set_dir_flags: error: gpio GPIO4_13 not reserved gpio@20a8000: set_dir_flags: error: gpio GPIO4_0 not reserved gpio@20a8000: get_value: error: gpio GPIO4_13 not reserved gpio@20a8000: get_value: error: gpio GPIO4_0 not reserved gpio@20a0000: set_dir_flags: error: gpio GPIO2_1 not reserved gpio@20a0000: set_value: error: gpio GPIO2_1 not reserved Fixes: 191840ae99 ("ARM: imx: udoo_neo: Enable OF_CONTROL and DM gpio/pin control") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07riscv: sifive: Fix OF_BOARD boot failureBin Meng2-2/+2
When using QEMU to have a quick test of booting U-Boot S-mode payload directly without the needs of preparing the SPI flash or SD card images for SiFive Unleashed board, as per the instructions [1], it currently does not boot any more. This was caused by the OF_PRIOR_STAGE removal, as gd->fdt_blob no longer points to a valid DTB. OF_BOARD is supposed to replace OF_PRIOR_STAGE, hence we need to add the OF_BOARD logic in board_fdt_blob_setup(). [1] https://qemu.readthedocs.io/en/latest/system/riscv/sifive_u.html#running-u-boot Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Fixes: d6f8ab30a2af ("treewide: Remove OF_PRIOR_STAGE") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07rockchip: puma/lion: update MAINTAINERS fileQuentin Schulz2-2/+2
Philipp does not work at Theobroma Systems anymore so let's swap Philipp's address with mine. Cc: Philipp Tomsich <philipp.tomsich@vrull.eu> Cc: Quentin Schulz <foss+u-boot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
2021-12-24engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OFJagan Teki1-0/+6
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24doc: rockchip: puma: update build and flash instructionsQuentin Schulz1-36/+30
Long gone is the time a custom TF-A was needed for Puma, upstream TF-A works just fine now. The flashing instructions are updated to match how newer rkdeveloptool and rkbin work. Finally, rkbin provides a way to flash SPI via USB OTG interface so let's document that. Cc: Quentin Schulz <foss+u-boot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-15Merge tag 'rpi-next-2022.01' of ↵Tom Rini1-1/+6
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi - enable RPi Zero 2 W - fix MMC numbering issue - Update link to documentation
2021-12-13Merge tag 'u-boot-stm32-20211213' of ↵Tom Rini1-4/+10
https://source.denx.de/u-boot/custodians/u-boot-stm - enable KSZ90x1 PHY driver on DHCOR - DHSOM boards: - increase USB power-good delay - add update_sf script to install U-Boot into SF - increase PHY auto-negotiation timeout to 20 seconds - fix SoM and board coding strap GPIO handling # gpg verification failed.
2021-12-13ARM: stm32: Fix SoM and board coding strap GPIO handling on DHSOMMarek Vasut1-4/+10
The variables retaining the strap values have to be initialized, always, make it so. Moreover, free the requested GPIO list at the end to avoid wasting memory. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13arm: dts: Create common rz-g2-beacon-u-boot fileAdam Ford1-0/+10
The rzg2_beacon_defconfig creates an image for RZ/G2[MNH] and as such creates three different device trees and each of them have a corresponding -u-boot.dtsi file which are basically copies of each other. Create a common include file to be referenced by each of the respective board-u-boot.dtsi files to reduce duplicate code and simplify support going forward. This also restores some lost functionality from the device tree re-sync and updates the MAINTAINER file to include all beacon-renesom device tree files. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-08sunxi: Remove misleading USB-OTG charger messageAndre Przywara1-7/+1
The sunxi MUSB glue driver has some code to check for external VBUS presence when it's going to use the MUSB host mode, and it warns if there is VBUS provided through the cable (in sunxi_musb_enable()). This code was apparently copied to the USB gadget detection code (g_dnl_board_usb_cable_connected()), but here we actually *expect* external VBUS power, so a warning is wrong and confusing. So far this message rarely triggered, but a recent patch (6fa41cdd19b9) changed this: =========================== => ums 0 mmc 2 UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0xe90000 A charger is plugged into the OTG /A charger is plugged into the OTG \A charger is plugged into the OTG |A charger is plugged into the OTG -A charger is plugged into the OTG .... =========================== Remove the message for the gadget cable detection call, and just return the status of the VBUS detection, as this is what the callers are after. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-12-02riscv: Enable SPI flash env for SiFive Unmatched.Thomas Skibo1-0/+1
Enable saving environment to SPI flash memory on SiFive Unmatched. Signed-off-by: Thomas Skibo <thomas-git@skibo.net> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02riscv: Support booting SiFive Unmatched from SPI.Thomas Skibo1-0/+3
Configure SPI flash devices into SPL. Add SPI boot option to spl.c. Document how to format flash for booting. Signed-off-by: Thomas Skibo <thomas-git@skibo.net> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02riscv: Update Microchip MPFS Icicle Kit supportPadmarao Begari2-1/+21
This patch updates Microchip MPFS Icicle Kit support. For now, add Microchip I2C driver, set environment variables for mac addresses and default build for SBI_V02. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-11-30rpi: Add identifier for the new RPi Zero 2 WPeter Robinson1-0/+5
The Raspberry Pi Foundation released the new Zero 2 W which we want to detect, so we can detect the correct device tree file name. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30rpi: Update the Raspberry Pi doucmentation URLPeter Robinson1-1/+1
The Raspberry Pi Foundation has updated their documentation so update the URL to the latest place to find the HW device revision codes. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30arm: mvebu: turris_omnia: enable A385 watchdog before disabling MCU watchdogPali Rohár1-2/+63
Commit aeb0ca64dbb5 ("arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART") disabled MCU watchdog when booting over UART to ensure that watchdog does not reboot the board before UART transfer finishes. But if UART transfer fails for some reason, or if U-Boot binary crashes, then board hangs forever as there is no watchdog running which could reset it. To fix this issue, enable A385 watchdog with very high timeout before disabling MCU watchdog to ensure that even slow transfer can finish successfully before watchdog timer expires and also to ensure that if board hangs for some reason, watchdog will reset it. Omnia's MCU watchdog has fixed 120 seconds timer and it cannot be changed (without updating MCU firmware). A385 watchdog by default uses 25 MHz input clock and so the largest timeout value (2^32-1) can be just 171 seconds. But A385 watchdog can be switched to use NBCLK (L2) as input clock (on Turris Omnia it is 800 MHz clock) and in this case final watchdog clock frequency is calculated as: freq = NBCLK / 2 / (2 ^ R) So A385 watchdog on Turris Omnia can be configured to at most 1374 seconds (about 22 minutes). We set it to 10 minutes, which should be enough even for bigger U-Boot binaries or slower UART transfers. Both U-Boot and Linux kernel, when initializing A385 watchdog, switch watchdog timer to 25 MHz input clock, so usage of NBCLK input clock in U-Boot SPL does not cause any issues. Fixes: aeb0ca64dbb5 ("arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-11-29qemu: common: Fix build with update capsuleVincent Stehlé1-1/+0
The common emulation Makefile has a dependency on a non-existent qemu_capsule.o when building with support for capsule update enabled (CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y). The code which was in qemu_capsule.c has been completely moved to lib/efi_loader/efi_capsule.c by commit 7a6fb28c8e4b ("efi_loader: capsule: add back efi_get_public_key_data()"). Remove the false dependency. This fixes the following build error: make[1]: *** No rule to make target 'board/emulation/common/qemu_capsule.o', needed by 'board/emulation/common/built-in.o'. Stop. Fixes: commit 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to .rodata"") Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Simon Glass <sjg@chromium.org>
2021-11-18Revert "board: synquacer: developerbox: Don't set gd->env_addr to ↵Masami Hiramatsu1-0/+2
default_environment" Without default setting of gd->env_addr, U-Boot will cause a synchronous abort if the env-variables on the SPI flash is broken or not saved corectly. Set gd->env_addr correctly. This reverts commit 535870f3b0fb09ee9b2885409f05304111464643. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-11-16Merge branch '2021-11-15-assorted-fixes'Tom Rini12-13/+13
- Rename "tqc" to "tq" and related updates - Assorted minor ARM updates, build updates and documentation updates
2021-11-16Merge tag 'xilinx-for-v2022.01-rc3' of ↵Tom Rini2-9/+961
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.01-rc3 sdhci: - Fix emmc mini case with missing firmware interface zynqmp: - Restore JTAG interface if required - Allow overriding board name - Add support for DLC21 - Fix one fallthrought statement description - Use config macro instead of name duplication - Save multiboot to variable firmware: - Handle ipi_req errors better - Use local buffer in case user doesn't need it instead of NULL/0 location spi: - gqsi: Fix write issue at low frequencies net: - gem: Disable broadcasts
2021-11-15board: tq: fix spelling of "TQ-Systems"Matthias Schiffer6-8/+8
"TQ-Systems" is written with a dash. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-11-15board: rename "tqc" vendor to "tq"Matthias Schiffer12-5/+5
The subdivision name "TQ Components" hasn't been in use for a long time. Rename the vendor directory to "tq", which also matches our Device Tree vendor prefix. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-11-15xilinx: zynqmp: fix ZYNQMP_RESTORE_JTAG checkRicardo Salveti1-1/+1
Config check should be done without the SPL_ prefix. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Link: https://lore.kernel.org/r/20211104192802.3093811-1-ricardo@foundries.io Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-11-11boards: siemens: iot2050: Ignore network errors during bootstage trackingJan Kiszka1-1/+2
We need to filter out NET_ETH_START errors because we have to enable networking in order to propagate the MAC addresses to the DT while there is no network driver for the prueth in U-Boot yet. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-11-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini4-22/+17
- device-tree sync-up with Linux for ls1028a - fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc, spintable code, configs, qspi node, pci - enable EFI_SET_TIME support in sl28 - powerpc: Drop -mstring
2021-11-10Merge tag 'u-boot-stm32-20211110' of ↵Tom Rini8-8/+11
https://source.denx.de/u-boot/custodians/u-boot-stm - DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay1-1/+5
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Align mtdparts with SPI NOR layout on DHSOMMarek Vasut1-1/+0
The DHSOM uses different SPI NOR layout than the ST devkit, stop pulling in the ST specific runtime mtdparts settings and adjust the mtdparts accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10gpio: stm32: create include file for driver private dataPatrick Delaunay1-1/+0
The stm32 gpio driver private data are not needed in arch include files, they are not used by code except for stm32 gpio and pincontrol drivers, using the same IP; the defines for this IP is moved in a new file "stm32_gpio_priv.h" in driver/gpio. This patch avoids to have duplicated file gpio.h for each SOC in MPU directory mach-stm32mp and in each MCU directory arch-stm32* and allows to remove CONFIG_GPIO_EXTRA_HEADER for all STM32. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10board: stmp32mp1: split board and SOC STM32MP15 configurationPatrick Delaunay5-5/+6
Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-09Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini1-0/+3
[trini: Migrate CONFIG_EXYNOS7420 as part of merging, so espresso7420 still builds] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09board: kontron: sl28: add myself to ls1028a.dtsi maintainersMichael Walle1-0/+1
I'd like to keep informed about ls1028a.dtsi changes. For now, there is no top-level entry for any layerscape specific files. Instead, add the file entry to my board MAINTAINERS file. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: freescale: lx216x : increase fdt blob sizeWasim Khan1-0/+8
Increase fdt blob size for lx2160 and lx2162 series to fix below errors/warnings during device tree fixup. Unable to update property /soc/spi@2100000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2110000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2120000:status, err=FDT_ERR_NOSPACE WARNING: could not set reg FDT_ERR_NOSPACE. WARNING unable to set iommus: FDT_ERR_NOSPACE Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: fsl_validate: Fix Double free IssueKshitiz Varshney1-22/+6
Remove Double free issue from calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using lx2162aqds board. Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: freescale: t104xrdb: Set popts->cpo_sample to 0x54 for DDR3Priyanka Singh1-0/+2
Set popts->cpo_sample to 0x54 in t104xrdb/ddr.c to optimize cpo Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-2/+2
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 20:54:28 +0000