summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2022-12-23global: Migrate CONFIG_ODROID_REV_AIN to CFGTom Rini1-2/+2
Perform a simple rename of CONFIG_ODROID_REV_AIN to CFG_ODROID_REV_AIN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_MXC_UART_BASE to CFGTom Rini1-2/+2
Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_MAX_RAM_BANK_SIZE to CFGTom Rini2-2/+2
Perform a simple rename of CONFIG_MAX_RAM_BANK_SIZE to CFG_MAX_RAM_BANK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_MAX_MEM_MAPPED to CFGTom Rini1-7/+7
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_ICS307_REFCLK_HZ to CFGTom Rini1-2/+2
Perform a simple rename of CONFIG_ICS307_REFCLK_HZ to CFG_ICS307_REFCLK_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_FSL_SERDES2 to CFGTom Rini1-3/+3
Perform a simple rename of CONFIG_FSL_SERDES2 to CFG_FSL_SERDES2 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_FSL_SERDES1 to CFGTom Rini1-2/+2
Perform a simple rename of CONFIG_FSL_SERDES1 to CFG_FSL_SERDES1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_FSL_PMIC_BUS to CFGTom Rini1-1/+1
Perform a simple rename of CONFIG_FSL_PMIC_BUS to CFG_FSL_PMIC_BUS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_FEC_MXC_PHYADDR to CFGTom Rini2-2/+2
Perform a simple rename of CONFIG_FEC_MXC_PHYADDR to CFG_FEC_MXC_PHYADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_FEC_ENET_DEV to CFGTom Rini4-4/+4
Perform a simple rename of CONFIG_FEC_ENET_DEV to CFG_FEC_ENET_DEV Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_ETHBASE to CFGTom Rini1-1/+1
Perform a simple rename of CONFIG_ETHBASE to CFG_ETHBASE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_ET1100_BASE to CFGTom Rini1-1/+1
Perform a simple rename of CONFIG_ET1100_BASE to CFG_ET1100_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_ENV_TOTAL_SIZE to CFGTom Rini1-3/+3
Perform a simple rename of CONFIG_ENV_TOTAL_SIZE to CFG_ENV_TOTAL_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_ENV_SROM_BANK to CFGTom Rini2-6/+6
Perform a simple rename of CONFIG_ENV_SROM_BANK to CFG_ENV_SROM_BANK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_DFU_ALT et al to CFGTom Rini2-4/+4
Perform simple renames of: CONFIG_DFU_ALT to CFG_DFU_ALT CONFIG_DFU_ALT_BOOT_EMMC to CFG_DFU_ALT_BOOT_EMMC CONFIG_DFU_ALT_BOOT_SD to CFG_DFU_ALT_BOOT_SD CONFIG_DFU_ALT_SYSTEM to CFG_DFU_ALT_SYSTEM CONFIG_DFU_ENV_SETTINGS to CFG_DFU_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23exynos: Rework legacy PWM usageTom Rini2-4/+4
The way that the timer support is currently done for exynos/nexell platforms relies on the legacy PWM infrastructure, and that needs to be updated. However, we really cannot safely undef CONFIG_DM_PWM to build the timer.c file without warnings. For now, rename the relevant legacy functions to be prefixed with s5p_ and add prototypes to the arch pwm.h files. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-22T104xRDB: Remove non-TARGET_T1042D4RDB variantsTom Rini4-41/+3
At this point only the TARGET_T1042D4RDB variant of this is supported in tree, so remove the remaining parts of the other platforms. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZETom Rini1-1/+1
This is always defined to 16K, so we move this over to include/fsl_validate.h to start with. Next, we rename this from CONFIG_ to FSL_. Coalesce the various comments around this definition to be in fsl_validate.h as well to explain the usage. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22net: vsc9953: Remove this driverTom Rini1-46/+0
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB support at this time. Remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22etamin: Rework CONFIG_NAND_CS_INITTom Rini3-2/+11
Enable this in the board Kconfig file, but then check for it via CONFIG_IS_ENABLED so that it will only be true in the non-SPL case, as is done today. As part of this we move some defines local to where they are used as it's board specific. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_MONITOR_IS_IN_RAM to KconfigTom Rini1-18/+9
This converts the following to Kconfig: CONFIG_MONITOR_IS_IN_RAM As part of this, reword some of the documentation slightly to reflect that this is in Kconfig and not a define now. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22global: Remove unused CONFIG symbolsTom Rini1-1/+1
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22arm: samsung: Rename CONFIG_G_DNL_*_NUM variablesTom Rini1-4/+10
Following how g_dnl_bind_fixup is used on other platforms, rename the unchanging defines used here to be prefixed with EXYNOS rather than Samsung, and define them here. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini4-9/+20
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_DM9000_BYTE_SWAPPED et al to KconfigTom Rini2-4/+6
This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini3-16/+83
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-19Merge tag 'u-boot-rockchip-20221219' of ↵Tom Rini1-1/+54
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;
2022-12-19rockpi4: board: Add firmware image information for capsule updatesSughosh Ganu1-1/+54
Add information that will be needed for enabling the UEFI capsule update feature on the RockPi4 boards. With the feature enabled, it would be possible to update the idbloader and u-boot.itb images on the RockPi4B and RockPi4C variants. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-14sunxi: board: annotate #endif linesAndre Przywara1-6/+5
The legacy Allwinner code is cluttered with #ifdef's, some of them even nested, which makes the code hard to read and error prone. Eventually we will get rid of most of them, but for now let's at least annotate the #endif lines with the corresponding symbol the bracket started with. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14sunxi: remove bogus mmc_pinmux_setup() prototypeAndre Przywara1-4/+0
Since all callers of mmc_pinmux_setup() are located after the definition of that function, there is no need for a forward declaration (anymore?). Remove the prototype along with its #ifdef guards. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14sunxi: remove unused CONFIG_MMC_SUNXI_SLOTAndre Przywara1-2/+7
There is a CONFIG_MMC_SUNXI_SLOT definition in our sunxi_common.h config header, which was used to note the first MMC controller to initialise. The definition in that header was always set to 0, with no easy way of overriding this, and certainly none of the existing boards made any use of that (non-)feature. Remove that definition and replace it with a constant 0 in the only user, in board.c. It turns out that this is safe, as this is only used in the SPL, and the BROM also unconditionally initialises MMC0. This also removes the last legacy config symbol with SUN*I in it from the whitelist. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-12km/ppc: migrate all mpc83xx to DM_I2CHolger Brunck3-76/+2
Enable DM_I2C and I2C mux to get rid of the usage of the legacy i2c driver. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12board/km: remove obsolete ARCH_KIRKWOODHolger Brunck1-3/+2
We already removed the support for these boards. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12board/km/secu: migrate to use environment text filesHolger Brunck1-0/+50
Instead of having these defines in a header file, move them to a simple text file. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12board/km/cent2: migrate to environment text fileHolger Brunck3-13/+38
Use like the other boards a text file for the environment. As this is the last user of keymile-common.h we can now remove this file completely. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12km/powerpc: migrate to env.txt fileHolger Brunck1-0/+21
Use already present common.env file and add a powerpc specific env so that we can move all the environment defines to text files. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12board/km: move ls102xa boards to environment text filesHolger Brunck2-0/+6
Create a common.env which we can use later on also for other boards. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12arm: mach-omap2: Move common image process functions out of board filesAndrew Davis4-60/+0
The functions board_fit_image_post_process() and board_tee_image_process() are not actually board specific (despite their names). Any board using the OMAP2 family can use these functions. Move them to boot-common.c. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-12arm: mvebu: Espressobin: Fix default env variablesDerek LaHousse1-3/+17
Default env variables on Espressobin boards are broken since commit c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable") as well as the 'env default -a' command. The algorithm to find free space in the default_environment[] array returns after the first env variable instead of the correct position of the last variable, where there is allocated free space. This causes that U-Boot board_late_init() function to overwrite a portion of the default environment with $ethXaddr and $fdtfile variables immediately after the first env variable and so it is overwriting other variables. This patch also adds an additional null byte to terminate the environment array. But U-Boot board_late_init() function do not fill this nul byte explicitly. And because of that, U-Boot is later trying to interpret remaining buffer as a continuation of variable list. Normally buffer should be empty but due to the above issue, it contains garbage from remaining env variables. For example 'env default -a' command results in damaging variable names. It was observed that scritaddr variable name was changed to criptaddr (without leading 's'). This bug was reported and discussed on the Armbian forum: https://forum.armbian.com/topic/19564-making-espressobin-v7-work-in-2022/?do=findComment&comment=138136 Fix these issues in two steps: 1) Change code which finds free space for dynamic env variables in default_environment[] array by jumping to the end of the variable list instead of jumping after the first defined variable. [By Derek] 2) Add code which appends terminating nul byte as indication of the end of the env list, after the last nul term env string. [By Pali] Fixes: c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable") Signed-off-by: Derek LaHousse <derek@seaofdirac.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Stefan Roese <sr@denx.de>
2022-12-09board: ti: introduce the basic files needed to support the am62aBryan Brattlof4-0/+99
Introduce the bare minimum SD and UART support for the am62a sk. Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09Nokia RX-51: Use ENTRY/ENDPROC for save_boot_paramsPali Rohár1-2/+4
ENTRY/ENDPROC macros from linux/linkage.h will make code more readable and also will properly mark assembly symbol in ELF binary as function symbol. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-12-07net: tsec: Remove non-DM_ETH support codeTom Rini4-248/+0
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Doing this removes some board support code which was also unused. Finally, this removes some CONFIG symbols that otherwise needed to be migrated to Kconfig, but were unused in code now. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07global: Remove extraneous DM_ETH imply/selectTom Rini3-3/+0
We only need to enable DM_ETH if we have a networking driver. All networking drivers depend on DM_ETH being enabled, and their selection ensures DM_ETH will be enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Nokia RX-51: Migrate legacy USB device options to KconfigTom Rini1-0/+30
Move a number of legacy USB UDC options to Kconfig, over from the config header. Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05arm: samsung: Move CONFIG_MISC_COMMON to KconfigTom Rini1-0/+2
This option controls using board/samsung/common/misc.c, so add a Kconfig file there as well and select it from the boards which use this functionality. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-12-05mpc8548cds: Migrate CONFIG_INTERRUPTS to KconfigTom Rini1-0/+3
Only this platform sets this option, define it in the board Kconfig file. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_POWER_LTC3676 et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE3000 CONFIG_POWER_SPI CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_FSL_CADMUS to KconfigTom Rini1-0/+3
This converts the following to Kconfig: CONFIG_FSL_CADMUS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini99-672/+672
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_*SRIO_* to CFG_*Tom Rini3-12/+12
The rest of the unmigrated CONFIG symbols in the SRIO namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 06:16:23 +0000