summaryrefslogtreecommitdiff
path: root/board/gdsys
AgeCommit message (Collapse)AuthorFilesLines
2023-07-25MAINTAINERS: Add a number of "common" directoriesTom Rini2-0/+2
A number of platforms have "common" directories that are in turn not listed by the board MAINTAINERS file. Add these directories in many cases. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-07gdsys: Drop unused fpga fileSimon Glass2-29/+0
This is not used since CONFIG_SYS_FPGA_COMMON is not defined anywhere. Drop the code and the Makefile rule. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07gpio: Drop unused pca9698 driverSimon Glass1-1/+0
This is not used. Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07Correct CONFIG_CONTROLCENTERDCSimon Glass1-1/+1
This option does not exist but presumably means to point to CONFIG_TARGET_CONTROLCENTERDC. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini1-12/+12
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini1-3/+3
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-17mpc83xx: gazerbeam: Update sysinfo_get error handlingMichal Suchanek1-3/+9
In a later patch sysinfo_get will be changed to return the device in cae of an error. Set sysinfo to NULL on error to preserve previous behavior. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-04powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZETom Rini1-1/+1
We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-10net: phy: don't require PHY interface mode during PHY creationMarek Behún2-6/+7
Currently we require PHY interface mode to be known when finding/creating the PHY - the functions * phy_connect_phy_id() * phy_device_create() * create_phy_by_mask() * search_for_existing_phy() * get_phy_device_by_mask() * phy_find_by_mask() all require the interface parameter, but the only thing done with it is that it is assigned to phydev->interface. This makes it impossible to find a PHY device without overwriting the set mode. Since the interface mode is not used during .probe() and should be used at first in .config(), drop the interface parameter from these functions. Make the default value of phydev->interface (in phy_device_create()) to be PHY_INTERFACE_MODE_NA. Move the interface parameter to phy_connect_dev(), where it should be. Change all occurrences treewide. In occurrences where we don't call phy_connect_dev() for some reason (they only configure the PHY without connecting it to an ethernet controller), set phydev->interface = value from phy_find_by_mask call. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt1-7/+7
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-14board: gdsys: Drop Dirk Eibach from MAINTAINERSMarek Behún2-2/+1
I got an <dirk.eibach@gdsys.cc>: host mxlb.ispgateway.de[80.67.18.126] said: 554 Sorry, no mailbox here by that name. (in reply to RCPT TO command) when sending e-mail to dirk.eibach@gdsys.cc. Drop Dirk Eibach from MAINTAINERS of board/gdsys/a38x and board/gdsys/mpc8308. The latter would be left maintainerless, add Mario Six <mario.six@gdsys.cc> (he is also maintainer of the former board). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-14board: gdsys: a38x: Enable PCIe link 2 in spl_board_init()Pali Rohár1-0/+4
A385 controlcenterdc board does not use PCI DM properly and touches some PCIe devices directly in its board code. This controlcenterdc spl_board_init() function expects that PCIe link is already initialized. Link itself is initialized in a38x serdes code but this will change in future and link initialization will be postponed from U-Boot SPL to proper U-Boot. So explicitly enable PCIe link 2 in spl_board_init() function via SoC Control Register 1 to not break this code by future changes. This board has PCIe link 2 just x1, so no additional initialization (except enabling PCIe port) is needed. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-01-14arm: mvebu: Convert board_pex_config() to CONFIG_SPL_BOARD_INITPali Rohár1-1/+1
The only user of board_pex_config() weak function is A385 controlcenterdc board. It looks like that code in its board_pex_config() function needs to be executed after PCIe link is up. Therefore put this code into spl_board_init() function which is called after a38x serdes initialization, and therefore it is after the serdes hws_pex_config() function finishes (which is the state before this change). With this change completely remove board_pex_config() function as it is not used anymore. Signed-off-by: Pali Rohár <pali@kernel.org>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk1-1/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-28board: gdsys: a38x: ensure mdiodev->name is NULL terminated after ↵Vladimir Oltean1-3/+1
MDIO_NAME_LEN truncation strncpy() simply bails out when copying a source string whose size exceeds the destination string size, potentially leaving the destination string unterminated. One possible way to address is to pass MDIO_NAME_LEN - 1 and a previously zero-initialized destination string, but this is more difficult to maintain. The chosen alternative is to use strlcpy(), which properly limits the copy len in the (srclen >= size) case to "size - 1", and which is also more efficient than the strncpy() byte-by-byte implementation by using memcpy. The destination string returned by strlcpy() is always NULL terminated. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass1-8/+8
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass2-17/+17
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-31arm: mvebu: gdsys: Remove custom spl_board_init()Pali Rohár2-21/+1
The gdsys a38x config file (controlcenterdc_defconfig) uses BootROM to load U-Boot proper. Since it is now possible to do this via U-Boot SPL framework, we do not need to provide custom spl_board_init() which calls return_to_bootrom(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-10ppc: Remove controlcenterd boardsTom Rini11-2036/+0
These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Mario Six <mario.six@gdsys.cc> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove gdsys hrcon boardsTom Rini11-1026/+3
These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove gdsys strider boardsTom Rini9-861/+1
These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-02tpm: Switch TPMv1 over to use the new APISimon Glass5-40/+40
Take over the plain 'tpm_...' functions for use by the new TPM API. Rename all the TPMv1 functions so they are called from the API. Update the TPMv1 functions so that they are called from the API. Change existing users to use the tpm1_ prefix so they don't need to go through the API, which might introduce uncertainty. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-02-26ddr: marvell: a38x: add support for twin-die combined memory deviceMoti Buskila1-0/+1
commit 6285efb8a118940877522c4c07bd7c64569b4f5f upstream. the twin-die combined memory device should be treatened as X8 device and not as X16 one Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> [ - the default value for twin_die_combined is set to NOT_COMBINED for all boards, as this was default behaviour prior this change ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass4-0/+4
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-06board: Rename uclass to sysinfoSimon Glass2-27/+32
This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada4-7/+7
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass5-0/+6
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass10-0/+10
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass5-0/+5
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass7-17/+23
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass1-0/+1
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass2-0/+2
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass2-0/+2
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move hang() to the same header as panic()Simon Glass1-0/+1
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass1-0/+1
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass1-0/+1
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move pci_init_board() out of common.hSimon Glass2-0/+2
This function can be dropped when all boards use driver model for PCI. For now, move it into init.h with a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some board functions out of common.hSimon Glass4-0/+4
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move command functions out of common.hSimon Glass2-0/+2
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass2-0/+2
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Move env_get() to env.hSimon Glass4-0/+4
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get_ulong() to env.hSimon Glass1-0/+1
Move env_get_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass1-0/+1
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-21mpc83xx: Add gazerbeam boardDirk Eibach5-1/+211
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 2x 10/100 Mbit/s Ethernet (optional) Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: ioep-fpga: Switch to gazerbeam-style reportingMario Six1-140/+489
Use a more extensive FPGA feature reporting style in the gdsys ioep-fpga driver. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: cmd_ioloop: Make DM compatibleMario Six1-5/+288
Make the ioloop command DM compatible, while keeping the old functionality for not-yet-converted boards. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: cmd_ioloop: Introduce commenting enumMario Six1-4/+9
Replace the boolean parameter of io_check_status that controls whether the status is printed or not with a documenting enum. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: cmd_ioloop: Fix style violationsMario Six1-40/+38
Fix some style violations in the ioloop command, and make the code more readable where possible. Signed-off-by: Mario Six <mario.six@gdsys.cc>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 07:11:24 +0000