summaryrefslogtreecommitdiff
path: root/board/Marvell
AgeCommit message (Collapse)AuthorFilesLines
2021-10-31env: Always use char for default_environmentMarek Behún1-1/+1
Sometimes we use uchar and sometimes char for the default environment array. By always using char, we can get rid of some explicit casts. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas3-3/+6
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-08arm: mvebu: mvebu_armada-8k: drop Puzzle M801 early init codeRobert Marko1-19/+1
Since the CP1 pinctrl is not properly set in the DTS, there is no need for setting the pinctrl by writing hardcoded values to the MPP registers. So, drop the code relating to that. Fixes: 87c220d0 ("arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-01arm: Remove aspenite boardTom Rini4-74/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last armada100 platform, remove that support as well. Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk1-1/+1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk2-2/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-28net: replace the "xfi" phy-mode with "10gbase-r"Vladimir Oltean1-3/+3
As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-10arm: marvell: Dreamplug: fix typo in eth1 nameTony Dinh1-1/+1
Ethernet 1 should be ethernet-controller@76000. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10arm: kirkwood: Sheevaplug: Update board maintainerTony Dinh1-1/+1
Change maintainer to me. Prafulla is no longer active in U-Boot community. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass1-1/+1
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-31arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device treeTony Dinh1-14/+48
In DM Ethernet, the old "egiga0" and 'egiga1" names are no longer valid, so replace these with Ethernet PHY names from device tree. Also, read Ethernet PHY address for each port from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Use Ethernet PHY name and address from ↵Tony Dinh1-12/+42
device tree - In DM Ethernet, the old "egiga0" name is no longer valid, so replace it with Ethernet PHY name from device tree. Also, Ethernet PHY address is available so read it from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-15mmc: mmc_get_op_cond: Allow quiet detection of eMMCPali Rohár1-1/+1
Add a new 'quiet' argument to mmc_get_op_cond() function which avoids printing error message when SD/eMMC card is not detected. Espressobin and mx6cuboxi boards use this function for detecting presence of eMMC and therefore it is expected and normal that eMMC does not have to be connected. So error message "Card did not respond to voltage select!" should be skipped in this case as it is not an error. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-15arm: mvebu: Espressobin: Use function mmc_get_op_cond() for detecting eMMCPali Rohár1-1/+1
Use function mmc_get_op_cond() instead of mmc_init() for detecting presence of eMMC. Documentation for this function says that it could be used to detect the presence of SD/eMMC when no card detect logic is available. This function is also used by mx6cuboxi board for detecting presence of eMMC. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-15arm: mvebu: Espressobin: Fix setting $fdtfile envPali Rohár1-7/+0
Ensure that 'env default -a' always set correct value to $fdtfile, even when custom user variable is already stored in non-volatile env storage (means that env_get("fdtfile") call returns non-NULL value). As default value is now correctly set like if specified at compile time in CONFIG_EXTRA_ENV_SETTINGS, there is no need to set $fdtfile explicitly via env_set("fdtfile", ...) call. So remove wrong skip based on env_get("fdtfile") and then also unneeded env_set("fdtfile", ...) call. Fixes: c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-08octeontx: do not require cavium BDK node to be presentTim Harvey1-12/+8
The cavium,bdk node is a non-standard dt node used by the BDK and therefore it is removed from the dt before booting Linux. Do not require this node to exist as it won't for standard dt's. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-07arm: Remove gplugd boardTom Rini4-168/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Ajay Bhargav <contact@8051projects.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-16arm: octeontx2: Add Octeon TX2 CN913x DB supportKonstantin Porotchkin2-0/+25
This patch adds the base support for the Marvell Octeon TX2 CN913x DB. Only one defconfig is added with this patch. Other board variants are available (NAND, MMC booting) and images for these boards can be generated by following the documentation added in the included README. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29arm: octeontx2: Add Octeon TX2 CN9130 CRB supportKonstantin Porotchkin3-0/+58
This patch adds the base support for the Marvell Octeon TX2 CN9130 CRB. Not all interfaces are supported fully yet. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add Octeon III NIC23 board supportStefan Roese5-0/+409
This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: octeon_ebb7304: Add board specific QLM init codeAaron Williams1-2/+730
This patch adds the board specific QLM/DLM init code to the Octeon 3 EBB7304 board. The configuration of each port is read from the environment exactly as done in the 2013 U-Boot version to keep the board and it's configuration compatible. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-02-26ddr: marvell: a38x: add support for twin-die combined memory deviceMoti Buskila2-0/+2
commit 6285efb8a118940877522c4c07bd7c64569b4f5f upstream. the twin-die combined memory device should be treatened as X8 device and not as X16 one Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> [ - the default value for twin_die_combined is set to NOT_COMBINED for all boards, as this was default behaviour prior this change ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-15Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini15-0/+15
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15arm: Remove db-88f6281-bp boardTom Rini6-177/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Chris Packham <judge.packham@gmail.com>
2021-02-08arm: mvebu: Espressobin: Set default value for $ethNaddr env variablePali Rohár1-0/+19
On Espressobin board are MAC addresses stored in U-Boot env area. Therefore they are not present in default_environment[] array constructed at compile time. This change puts permanent MAC addresses into default_environment[] array at board runtime. Espressobin board has enabled DEFAULT_ENV_IS_RW option and therefore can modify this array. This change ensure that 'env default -a' does not delete permanent MAC addresses from Espressobin env storage area. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Andre Heider <a.heider@gmail.com>
2021-02-08arm: mvebu: Espressobin: Set default value for $fdtfile env variablePali Rohár1-4/+15
On Espressobin board value for $fdtfile cannot be determined at compile time and is calculated at board runtime code. This change uses a new option DEFAULT_ENV_IS_RW to allow modifying default_environment[] array at runtime and set into it correct value. This change also ensure that 'env default -a' set correct value to $fdtfile. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Andre Heider <a.heider@gmail.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass16-0/+16
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-27arm: mvebu: Espressobin: Disable slot when emmc is not presentPali Rohár1-3/+12
This change extends previous commit 061c6d1b238a ("arm: mvebu: Espressobin: Detect presence of emmc at runtime") and when emmc is not present then emmc is removed from U-Boot DM and corresponding slot is disabled. Therefore on Espressobin board without soldered emmc, state of emmc hw should be same as if emmc was disabled in DTS. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-07arm: mvebu: Espressobin: Detect presence of emmc at runtimePali Rohár1-1/+5
Try to initialize emmc in board_late_init() and if it fails then we know that emmc device is not connected. This allows to use in U-Boot just one DTS file for all Espressobin variants and also to correctly set fdtfile env variable for Linux kernel. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Gérald Kerma <gerald@gk2.net> Reviewed-by: Andre Heider <a.heider@gmail.com>
2020-12-07arm: mvebu: puzzle-m801: Add a maintainerLuka Kovacic1-0/+1
Add Luka Perkov to Puzzle-M801 BOARD MAINTAINERS. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14arm64: dts: armada-3720-espressobin: use Linux model/compatible stringsAndre Heider1-4/+4
Fix the actual board vendor and ease synching dts files from Linux. Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 ↵Luka Kovacic1-1/+19
networking Add support for the marvell,armada8040-puzzle-m801 compatible string in the board/Marvell/mvebu_armada-8k/board.c file to initialize the networking on iEi Puzzle-M801 board (2x CP1 1 Gb ports). Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14arm: mvebu: Initial iEi Puzzle-M801 supportLuka Kovacic1-0/+6
Add initial U-Boot support for the iEi Puzzle-M801 board based on the Marvell Armada 88F8040 SoC. Currently supported hardware: 1x USB 3.0 4x Gigabit Ethernet 2x SFP+ (with NXP PCA9555 and NXP PCA9544) 1x SATA 3.0 1x M.2 type B 1x RJ45 UART 1x SPI flash 1x EPSON RX8010 RTC Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-07mips: octeon: octeon_ebb7304: Add DDR4 supportStefan Roese2-4/+468
This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-01arm: mvebu: Espressobin: Fix checks against machine compatible stringsAndre Heider1-2/+2
The patches changing the compatible strings to the ones used by Linux have not been merged yet, so fix the checks to use the current in-tree ones. Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org>
2020-09-24arm: mvebu: Espressobin: Set environment variable fdtfileAndre Heider1-0/+47
Required for the generic distro mechanism. Linux ships with 4 variants: marvell/armada-3720-espressobin-v7-emmc.dtb marvell/armada-3720-espressobin-v7.dtb marvell/armada-3720-espressobin-emmc.dtb marvell/armada-3720-espressobin.dtb Use available information to determine the appropriate filename. Fixes booting GRUB EFI arm64 on Fedora. Reported-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-08-31arm: mvebu: Espressobin: Setup MTD partitions when booting kernelPali Rohár1-0/+100
Due to different partition layouts in different U-Boot versions, DTS for Espressobin in Linux does not contain any definition of MTD partitions. See commit https://git.kernel.org/stable/c/00954566464a4 for more details. This patch via ft_board_setup() hook fills current partition layout used by U-Boot, so booted kernel would see correct MTD partitions layout. U-Boot env partition is calculated from CONFIG_ENV_OFFSET option. First partition contains secure firmware, ARM trusted firmware and U-Boot with checksums. So it is not possible to replace just one image (e.g. U-Boot) without updating other parts where is stored checksum of U-Boot. Therefore there is no extra partition defined for U-Boot and first partition is called just 'firmware'. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-31arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan portsPali Rohár1-0/+9
By default Topaz switch on Espressobin board forwards packets between all ethernet ports, including CPU (port 0), wan (port 1) and lan (ports 2,3). This default U-Boot setup is unsuitable for using Espressobin as router as it opens security hole in forwarding all packets between wan and lan ports. E.g. dhcp packets from wan network leaks to lan network during small time window until U-Boot boots Linux kernel which loads network drivers which disallows forwarding between wan and lan. This patch fixes above problem. For Espressobin board prior putting Topaz switch into forwarding mode, Topaz switch is reconfigured to allow forwarding packets from wan and lan ports only to CPU port. This ensures that packets from wan port are not forwarded to lan ports and vice-versa. Packets from CPU port are still forwarded to all other ports, so U-Boot network boot works with any ethernet port as before. This problem was already discussed on Espressobin forum [1] and on Marvell's github issue tracker [2]. As a workaround people on Espressobin forum patched U-Boot to completely disable lan ports on Topaz switch which prevented forwarding packets. That workaround had an issue that U-Boot was unable to netboot via lan ports anymore. Change in this patch does not have such issue. This security issue has been dicussed here as well: [3]. [1] - https://web.archive.org/web/20191231164238/http://espressobin.net/forums/topic/boot-behavior-of-the-switch-and-security/ [2] - https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/issues/18 [3] - https://forum.armbian.com/topic/12635-espressobin-uboot-security-concerns-switch-init-portmask/ Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-25arm: octeontx2: Add support for OcteonTX2 SoC platformsSuneel Garapati7-0/+606
This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
2020-08-25arm: octeontx: Add support for OcteonTX SoC platformsSuneel Garapati7-0/+569
This patch adds support for all OcteonTX 81xx/83xx boards from Marvell. For 81xx boards, use octeontx_81xx_defconfig and for 83xx boards, use octeontx_83xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
2020-07-18mips: octeon: Add minimal Octeon 3 EBB7304 EVK supportStefan Roese4-0/+43
This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada5-5/+5
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass6-0/+6
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass3-0/+3
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass13-0/+13
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass4-0/+4
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_phy() to net.hSimon Glass5-0/+5
This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move some board functions out of common.hSimon Glass1-0/+1
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-29arm: mvebu: Avoid generating kwbimage.cfg in the source treeBin Meng2-4/+4
At present some boards generate kwbimage.cfg in the source tree during the build. This breaks buildman testing on some systems where the source tree is read-only. Update makefile rules to generate it in the build tree instead. Note some other boards have the kwbimage.cfg file written in advance, hence we need check if the file exists in the build tree first, otherwise we fall back to one in the source tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 19:56:01 +0000