summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-10-06MAINTAINERS: Update my email addressMaxime Ripard2-4/+4
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-06arm: socfpga: disable CONFIG_SPL_WDT for gen5 and a10Simon Goldschmidt13-0/+13
These boards don't have a watchdog enabled in SPL, so make sure CONFIG_SPL_WDT is not enabled. Fixes: commit 6874cb72204f ("watchdog: Split WDT from SPL_WDT") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-06gitlab-ci: fix typo 'plaforms'Heinrich Schuchardt1-4/+4
%s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini7-0/+44
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-04Merge branch '2019-10-04-master-imports'Tom Rini43-72/+145
- Assorted TI platform fixes - Revert the change that broke environment flag validation - Assorted typo fixes - Assorted Kconfig dependency fixes - Other minor bug fixes
2019-10-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini2-4/+7
- dm: core: Correct low cell in ofnode_read_pci_addr() - dm: core: Correct bad cast in ofnode_get_addr_size_index()
2019-10-04Revert "env: solve compilation error in SPL"Tom Rini1-6/+1
This reverts commit 7d4776545b0f8a8827e5d061206faf61c9ba6ea9. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford2-0/+19
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04initcall.h: initcall_run_list(): Improve debug outputOvidiu Panait1-3/+5
Existing debug output is mixed with the function name: initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263) Turn it to: initcall_run_list() initcall: 25263 (relocated to 425263) Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2019-10-04Kconfig: fix a typo in the description of bmp command.Andrius Štikonas1-1/+1
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
2019-10-04Kconfig: Migrate CONFIG_BOOTM_* optionsTom Rini30-53/+74
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04cmd: part: number: return hexadecimal valueRoman Stratiienko1-1/+1
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756f62034 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: Pontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-10-04ARM: keystone2: update the default addresses of the secure monitorJean-Jacques Hiblot1-2/+2
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-04board: ti: am654: Disable TRNG node for HS devicesAndrew F. Davis3-2/+35
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-04autoboot: add necessary dependency at AUTOBOOT_MENU_SHOWAKASHI Takahiro1-0/+1
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-10-04MAINTAINERS, git-mailrc: Update the maintainer for socfpgaLey Foon Tan2-1/+3
This updates MAINTAINERS and git-mailrc to add me as maintainer for socfpga. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Marek Vasut <marex@denx.de>
2019-10-04Makefile: mrproper should remove *.pyc filesHeinrich Schuchardt1-1/+1
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove them. Removing *.pyc files helps for instance sometimes when running into an error "binman: Unknown entry type 'blob' in node '/binman/blob'". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-04Makefile: Fix typo around CONFIG_SPL_FIT_SOURCEMichal Simek1-1/+1
Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-04arm: K3: Increase default SYSFW image size allocationAndrew F. Davis1-1/+1
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 269000 bytes but now needs to be grown to 276000 to make room for the signatures attached to the board configuration data on High Security devices. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-10-03dm: core: Correct bad cast in ofnode_get_addr_size_index()Simon Glass1-2/+5
At present this code passes an fdt_addr_t pointer as a u64 pointer which is not safe, since sizeof(fdt_addr_t) may be 4, e.g. with sandbox. Correct this to avoid a stack corruption problem. Fixes: e679d03b08 (core: ofnode: Add ofnode_get_addr_size_index) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-03dm: core: Correct low cell in ofnode_read_pci_addr()Simon Glass2-2/+2
This reads the low cell of the PCI address from the wrong cell. Fix it. Also fix the function that this code came from. Fixes: 9e51204527 (dm: core: Add operations on device tree references) Fixes: 4ea5243a3a (fdt: fix fdtdec_get_pci_addr() for CONFIG_PHYS_64BIT) Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-01Merge tag 'rpi-next-2019.10.2' of https://github.com/mbgg/u-bootTom Rini2-1/+11
RPi4: Fix amount of memory seen by the kernel.
2019-10-01Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini2-1/+6
- Propagate acpi_rsdp_addr to x86 kernel via boot parameters
2019-10-01x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parametersAndy Shevchenko2-1/+6
This is reincarnation of the U-Boot commit 3469bf4274540d1491d58e878a9edc0bdcba17ac Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Wed Jan 10 19:40:15 2018 +0200 x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters after upstream got eventually the Linux kernel commit e6e094e053af75cbc164e950814d3d084fb1e698 Author: Juergen Gross <jgross@suse.com> Date: Tue Nov 20 08:25:29 2018 +0100 x86/acpi, x86/boot: Take RSDP address from boot params if available Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-01rpi4: enable dram bank initializationMatthias Brugger2-1/+11
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-30Merge tag 'u-boot-atmel-fixes-2019.10-a' of ↵Tom Rini5-23/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2019.10 cycle: This includes only tiny cleanups on env changes related to 2019.10 new features: removal of duplicate env settings (otherwise there may be warnings in building..) and a small fix for flashes on Gardena smart gateway (requires nand bad block tables).
2019-09-30Merge tag 'u-boot-rockchip-20190928' of ↵Tom Rini2-3/+3
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix efuse read data number for rk3399 - make_fit_atf.py: fix .its generation for a single atf image
2019-09-30at91: configs: Drop duplication of defconfig macrosTudor Ambarus4-22/+0
'commit a9221f3ebd6d ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")' migrated CONFIG_ENV_ macros to defconfigs but did not remove the identical redefinition of these macros in include/configs/. Since the duplicated macros have the same value as the ones in defconfigs, no "redefined" warnings were raised. Remove duplicated macros for all sama5 and sam9x5ek boards. While verifying that the removal of the macros from include/configs did not change the same macros in defconfigs, overwrite the old defconfig by saving them with the output from "make arch=ARM savedefconfig". This resulted in the movement of some macros in the defconfig files. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-09-30arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBTStefan Roese1-1/+0
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-09-30ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulatorMarek Vasut7-0/+44
This patch restores commit c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator"), which was accidentally dropped during DT resync in commit 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0"). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Fixes: 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-28rockchip: make_fit_atf.py: fix .its generation for a single atf imageHeiko Stuebner1-2/+2
The commit 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error") fixed the double-loading of the primary atf-image, but didn't take into account that there may be rare atf images with only that main section present. Right now this will result in a broken its due to the loadables section not getting closed correctly, so fix that by adapting the guards around the loop. The guards now protect against 0 segments when the bl31 binary doesn't contain any section and 1 segment when only a core atf section is present. Fixes: 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-28rockchip: misc: read the correct number of bytes from the efuseHeiko Stuebner1-1/+1
Originally the cpuid var the value gets read into was defined as u8 cpuid[RK3399_CPUID_LEN]; hence the sizeof(cpuid) would return the correct the correct number of array elements. With the move to a separate function cpuid becomes a pointer and sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case. We do have the actual id length available as function param so use it for actual amount of bytes to read. Fixes: 04825384999f ("rockchip: rk3399: derive ethaddr from cpuid") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-26Merge tag 'efi-2019-10-rc5' of ↵Tom Rini2-11/+7
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc5 Bug fixes for the SetVariable() boot service.
2019-09-24ci: add envtools supportPierre-Jean Texier2-0/+11
This commit add envtools suppport to CI to verify if there is no build issues. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-24env: add missing <compiler.h> header filePierre-Jean Texier1-0/+1
Since commit af95f20 ("env: Create a new file for environment functions"), a new header file exists. So, this commit add a missing header file. Fixes: include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); ^~~~~ long include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-24fw_env: fix build errorPierre-Jean Texier1-1/+2
The following error appears: tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE)); Fixes: d3716dd ("env: Rename the redundancy flags") Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Suggested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-24fw_env: remove duplicated definitionsPierre-Jean Texier1-7/+0
Since commit d3716dd ("env: Rename the redundancy flags"), the definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved to env.h. Fixes: tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_ACTIVE = 1; ^~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here ENV_REDUND_ACTIVE = 1, ^~~~~~~~~~~~~~~~~ tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_OBSOLETE; ^~~~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here ENV_REDUND_OBSOLETE = 0, Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-23efi_loader: SetVariable() deleting variablesHeinrich Schuchardt1-5/+6
APPEND_WRITE with data length zero is allowable according to the UEFI specification. The EDK2 interpretation of no access attributes is attributes = 0. As the UEFI specification is vague in this respect let's stick to EDK2 here. Fixes: commit 6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-23efi_loader: SetVariable() fix illegal returnHeinrich Schuchardt1-1/+1
We always have to return via EFI_EXIT() from EFIAPI functions. Coverity reported an unreachable line and a resource leak. Fixes: commit 6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE") Reported-by: Coverity Scan CID 253575, CID 184095 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-23efi_loader: description efi_stri_coll()Heinrich Schuchardt1-5/+0
Remove outdated TODO for efi_stri_coll(). efi_stri_coll() is already using the Unicode capitalization table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-23Prepare v2019.10-rc4v2019.10-rc4Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23configs: Resync with savedefconfigTom Rini466-642/+586
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-22Merge tag 'fixes-for-2019.10' of ↵Tom Rini14-4/+98
https://gitlab.denx.de/u-boot/custodians/u-boot-video.git - fix sunxi LCD clock divider - fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO - fix splash banner output with DM_VIDEO
2019-09-21Merge tag 'efi-2019-10-rc4-5' of ↵Tom Rini8-39/+171
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc4 (5) This patch set fixes errors in the UEFI sub-system and adds a function to compare u16 strings which is prerequisite for further patches.
2019-09-21sunxi: video: HDMI: Fix LCD clock dividerMark Kettenis1-1/+1
Currently we may end up with an LCD clock divider that differs from the HDMI PHY clock divider if we can't exactly match the pixel clock. Fix this by using DIV_ROUND_UP to calculate the divider. This works since the PLL is chosen such that the resulting pixel clock is never higher than the requested pixel clock. Fixes: 1feed358ed15 ("sunxi: video: HDMI: Fix clock setup") Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2019-09-21splash: fix splash banner outputAnatolij Gustschin1-1/+45
Old splash code in cfb_console driver displayed U-Boot version string by default. Restore this behaviour for DM_VIDEO enabled configurations. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Fabio Estevam <festevam@gmail.com>
2019-09-21imx: mx6sabreauto: fix splash logo drawingAnatolij Gustschin1-0/+2
Enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: colibri_imx6: fix splash logo drawingAnatolij Gustschin1-0/+1
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: icore: fix splash logo drawingAnatolij Gustschin5-0/+9
Define "splashimage" variable in the default environment and enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: apalis_imx6: fix splash logo drawingAnatolij Gustschin1-0/+1
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 22:22:56 +0000