summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski12-7/+220
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31SoC: qcom: add support for SDM845Dzmitry Sankouski7-0/+312
Hi-end qualcomm chip, introduced in late 2017. Mostly used in flagship phones and tablets of 2018. Features: - arm64 arch - total of 8 Kryo 385 Gold / Silver cores - Hexagon 685 DSP - Adreno 630 GPU Tested only as second-stage bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Stephan Gerhold <stephan@gerhold.net>
2021-10-31clocks: qcom: add clocks for SDM845 debug uartDzmitry Sankouski3-1/+95
Allows to change clock frequency of debug uart, thus supporting wide range of baudrates. Enable / disable functionality is not implemented yet. In most use cases of SDM845 (i.e. mobile phones and tablets) it's not needed, because qualcomm first stage bootloader leaves it initialized, and on the other hand there's no possibility to replace signed first stage bootloader with u-boot. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoCDzmitry Sankouski5-3/+54
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> [trini: Add CONFIG_SDM845 around sdm845_data usage]
2021-10-31spmi: msm: add arbiter version 5 supportDzmitry Sankouski2-50/+105
Currently driver supports only version 1 and 2. Version 5 has slightly different registers structure Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31serial: qcom: add support for GENI serial driverDzmitry Sankouski5-0/+639
Generic Interface (GENI) Serial Engine (SE) based uart can be found on newer qualcomm SOCs, starting from SDM845. Tested on Samsung SM-G9600(starqltechn) by chain-loading u-boot with stock bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31doc: board: apple: Add Apple M1 documentationMark Kettenis3-0/+69
Provide preliminary instructions on how to get U-Boot to run on Apple Silicon Macs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: dts: apple: Add preliminary device treesMark Kettenis8-0/+835
Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31iommu: Add Apple DART driverMark Kettenis4-0/+71
The DART is an IOMMU that is used on Apple's M1 SoC. This driver configures the DART such that it operates in bypass mode which is enough to support DMA for the USB3 ports integrated on the SoC. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31serial: s5p: Add Apple M1 supportMark Kettenis5-24/+130
Apple M1 SoCs include an S5L UART which is a variant of the S5P UART. Add support for this variant and enable it by default on Apple SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: apple: Add initial support for Apple's M1 SoCMark Kettenis9-0/+283
Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add MAINTAINERS entry]
2021-10-31test: Add tests for IOMMU uclassMark Kettenis10-0/+60
Add a set of tests for the IOMMU uclass. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31iommu: Add IOMMU uclassMark Kettenis9-0/+299
This uclass is intended to manage IOMMUs on systems where the IOMMUs are not in bypass mode by default. In that case U-Boot cannot ignore the IOMMUs if it wants to use devices that need to do DMA and sit behind such an IOMMU. This initial IOMMU uclass implementation does not implement and device ops and is intended for IOMMUs that have a bypass mode that does not require address translation. Support for IOMMUs that do require address translation is planned and device ops will be defined when support for such IOMMUs will be added. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: mvebu: Fix booting from SATAPali Rohár1-2/+2
Use proper SATA macro for boot_device switch in spl_boot_device() function. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 2226ca173486 ("arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header")
2021-10-31Revert "arch: arm: use dt and UCLASS_SYSCON to get gic lpi details"Michael Walle5-64/+38
Stop using the device tree as a source for ad-hoc information. This reverts commit 2ae7adc659f7fca9ea65df4318e5bca2b8274310. Signed-off-by: Michael Walle <michael@walle.cc> [trini: Also make board/broadcom/bcmns3/ns3.c fail clearly now] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-30Revert "arm64: Layerscape: Survive LPI one-way reset workaround"Tom Rini5-41/+1
Ad-hoc bindings that are not part of the upstream device tree / bindings are not allowed in-tree. Only bindings that are in-progress with upstream and then re-synced once agreed upon are. This reverts commit af288cb291da3abef6be0875527729296f7de7a0. Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marc Zyngier <maz@kernel.org>
2021-10-29Merge https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini7-6/+89
- Fix mmc_switch timeout - Update mmc hwpartitiion command - Support wait_dat0 for Freescale eSDHC/sdhci drivers
2021-10-29mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCIUsama Arif2-0/+15
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI. For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control needs to be enabled for multi block writes (MMC CMD 18). Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29mmc: Fix mmc_switch excessive timeoutKirill Kapranov1-2/+2
Fix branching to avoid premature falling back on a long timeout instead of continuation of the initialization attempt. Clear of the comment to avoid the ambiguity. Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29cmd: mmc: check whether card is SD or eMMC before hwpartitionJaehoon Chung1-0/+5
It doesn't need to follow more sequence to do the hwparititioning, because SD doesn't support hwpartitioning feature. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29cmd: mmc: Support mmc hwpartition user enh start -Marek Vasut1-4/+29
Add option to extend the hardware partition to the maximum size by using the '-' dash sign instead of $cnt parameter. This is useful in case we want to switch the entire eMMC user area into pSLC mode, especially in case the device may be populated with different size eMMCs. With this change, we do not have to calculate the number of blocks of the user area manually. To switch the pSLC mode for user area, use e.g. the following. WARNING: This is a one-time irreversible change. => mmc hwpartition user enh 0 - wrrel on complete Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29drivers: mmc: Add wait_dat0 support for sdhci driverStephen Carlson2-0/+22
Adds an implementation of the wait_dat0 MMC operation for the DM SDHCI driver, allowing the driver to continue when the card is ready rather than waiting for the worst case time on each MMC switch operation. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29drivers: mmc: Add wait_dat0 support for Freescale eSDHC driverStephen Carlson1-0/+16
Adds an implementation of the wait_dat0 MMC operation for the Freescale eSHDC driver, allowing the driver to continue when the card is ready rather than waiting for the worst case time on each MMC switch operation. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-28Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini8-36/+76
- mvebu: Fix usage of BIN header arguments (Pali) - mvebu: turris_omnia: Fix MTD partitions order for Linux (Pali) - mvebu: nandpagesize support for kwbimage v1 (Pali)
2021-10-28arm: mvebu: Fix comments about kwbimage structuresPali Rohár2-2/+2
kwbimage v1 is used on more SoCs. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Update name of kwbimage v1 field at offset 0x2-0x3Pali Rohár2-2/+2
At this offset is stored nand page size. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwboot: Patch nandpagesize to zero also for v1 imagePali Rohár1-7/+6
kwbimage v1 has also nandpagesize field. So set it to zero for both image versions when image is not signed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwbimage: Add support for NAND_PAGE_SIZE command also for v1 imagesPali Rohár2-1/+4
The NAND_PAGE_SIZE command is already supported by mkimage for v0 images, but not for v1 images. A38x and A39x BootROM supports reading NAND flash page size from v1 image in the same way as Kirkwood BootROM from v0 image. It it documented in A38x and A39x Functional Specification. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: turris_omnia: Fix MTD partitions order for LinuxPali Rohár1-1/+1
Linux enumerates MTD partitions in DTB order, while the fdt_add_subnode() function puts a new subnode at the beginning. To fix this, put MTD partitions into DTB in reverse order. Fixes: 92f36c8e74c1 ("arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTB") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Remove dummy BIN header arguments for SPL binaryPali Rohár1-1/+1
U-Boot SPL binary does not read BIN header arguments, so passing some dummy values 0000005b and 00000068 has no effect for U-Boot SPL code. Probably these two values comes from old Marvell DDR training code which was separated from U-Boot and used it for some configuration. Seems that two 32-bit values were specified here to ensure SPL code alignment to 128-bit boundary as it is required e.g. for A370 or AXP processors. Main kwbimage header is 64-byte long which is aligned to 128-bit boundary. Optional kwbheader is 32-bit long, number of BIN header arguments is stored in 32-bit number. So for alignment to 128-bit boundary is needed 64-bit padding which exactly these two 32-bit dummy arguments provided. Now when mkimage correctly aligns start of executable code in BIN header to 128-bit boundary, there is no requirement to put dummy argument values into kwbimage. So remove them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Add documentation for save_boot_params() functionPali Rohár1-0/+9
Important detail is availability of kwbimage BIN header arguments passed via r0 and r1 registers by BootROM. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwbimage: Align BIN header executable code to 128-bit boundaryPali Rohár1-17/+34
ARM executable code inside the BIN header on some mvebu platforms (e.g. A370, AXP) must always be aligned with the 128-bit boundary. This requirement can be met by inserting dummy arguments into BIN header. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwboot: Align UART baudrate change code in BIN header to 128-bit boundaryPali Rohár1-5/+17
ARM executable code inside the BIN header on some mvebu platforms (e.g. A370, AXP) must always be aligned with the 128-bit boundary. This requirement can be met by inserting dummy arguments into BIN header. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas31-69/+81
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26Merge tag 'efi-2022-01-rc1-2' of ↵Tom Rini23-388/+715
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1-2 doc: Remove obsolete PPC4XX references UEFI: Implement missing TCG2 measurements Code clean up # gpg: Signature made Tue 26 Oct 2021 05:56:47 PM EDT # gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4 # gpg: Good signature from "Heinrich Schuchardt <xypron.glpk@gmx.de>" [unknown] # gpg: aka "[jpeg image of size 1389]" [unknown] # Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
2021-10-26Merge branch '2021-10-26-add-nand-biterr-and-bugfixes'Tom Rini7-18/+144
- Add biterr sub-command to "nand" - scmi, rsa, uuid bugfixes, re-sort DFU menu in Kconfig and remove superfluous checks before free in env.
2021-10-26efi_loader: add DeployedMode and AuditMode variable measurementMasahisa Kojima1-8/+25
This commit adds the DeployedMode and AuditMode variable measurement required in TCG PC Client Platform Firmware Profile Specification. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26efi_loader: simplify tcg2_measure_secure_boot_variable()Masahisa Kojima1-42/+18
This commit simplifies tcg2_measure_secure_boot_variable() using secure_variables table. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26efi_loader: add UEFI GPT measurementMasahisa Kojima6-3/+190
This commit adds the UEFI GPT disk partition topology measurement required in TCG PC Client Platform Firmware Profile Specification Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26env: superfluous check before free()Heinrich Schuchardt1-4/+2
Free() checks if its argument in NULL. There is no need for the caller to do the same. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-26dfu: Sort Kconfig entries alphabeticallyMarek Vasut1-7/+7
The DFU_MTD Kconfig entry is in the wrong position, move it into the correct alphabetically sorted position. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-26lib: uuid: fix the test on RNG device presencePatrick Delaunay1-1/+1
Correct the test on RNG device presence,when ret is equal to 0, before to call dm_rng_read function. Without this patch the RNG device is not used when present (when ret == 0) or a data abort occurs in dm_rng_read when CONFIG_DM_RNG is activated but the RNG device is not present in device tree (ret != 0 and devp = NULL). Fixes: 92fdad28cfdf ("lib: uuid: use RNG device if present") CC: Matthias Brugger <mbrugger@suse.com> CC: Torsten Duwe <duwe@suse.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26common: Kconfig.boot: add config SPL_FIT_RSASSA_PSSPhilippe Reynes1-0/+7
The padding pss is only supported on u-boot and tools since commit 2bbed3ff8c7f ("image: Use Kconfig to enable FIT_RSASSA_PSS on host") This commit adds the config SPL_FIT_RSASSA_PSS to support the padding pss in the SPL. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26lib: rsa: rsa-verify: also check that padding is not NULLPhilippe Reynes1-1/+1
This commit adds a check on the padding in the function rsa_verify_key to avoid using a NULL pointer. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26firmware: scmi: fix struct layout for scmi_clk_rate_set_inClément Léger1-2/+2
First two fields are reversed compared to what is expected by the SCMI specification. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Fixes: 60388844836 ("clk: add clock driver for SCMI agents")
2021-10-26cmd: nand biterr - Add support for nand biterr commandBalamanikandan Gunasundar1-3/+124
The command shall be used to induce bit errors in the nand page manually. The code flips a bit in the specified offset without changing the ECC. This helps to see how the software handles the error. The patch is ported from https://patchwork.ozlabs.org/project/uboot/patch/\ 1325691123-19565-1-git-send-email-holger.brunck@keymile.com The implementation is inspired from 'mtd-utils/nand-utils/nandflipbits.c' Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2021-10-26efi_loader: add SMBIOS table measurementMasahisa Kojima8-14/+261
TCG PC Client Platform Firmware Profile Specification requires to measure the SMBIOS table that contains static configuration information (e.g. Platform Manufacturer Enterprise Number assigned by IANA, platform model number, Vendor and Device IDs for each SMBIOS table). The device- and environment-dependent information such as serial number is cleared to zero or space character for the measurement. Existing smbios_string() function returns pointer to the string with const qualifier, but exisintg use case is updating version string and const qualifier must be removed. This commit removes const qualifier from smbios_string() return value and reuses to clear the strings for the measurement. This commit also fixes the following compiler warning: lib/smbios-parser.c:59:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] const struct smbios_header *header = (struct smbios_header *)entry->struct_table_address; Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26Merge branch '2021-10-25-assorted-updates'Tom Rini7-14/+111
- Allow redundant environment on the eMMC HW boot partitions - Use LMB in "loads" - env, dfu + spi, OPTEE bugfixes
2021-10-25dfu: dfu_sf: Read the SPI flash in 16 MiB chunksMarek Vasut1-2/+12
Not all SPI flashes and controllers can do continuous transfer longer than 16 MiB, so perform the DFU read in 16 MiB chunks. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2021-10-25arm: spl: prepare for jumping to OPTEERicardo Salveti3-3/+30
Make sure to (if applicable) flush the D-cache, invalidate I-cache, and disable MMU and caches before jumping to OPTEE. This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on some other ARM SoCs. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 16:12:40 +0000