summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-13cmd: part: Extract common code to separate functionSam Protsenko1-38/+23
Refactor the code for "part start" and "part size" commands to avoid code duplication. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-13cmd: part: Allow passing partition name to start and sizeSam Protsenko1-11/+25
Allow passing the partition name to "part start" and "part size" commands, so we can avoid magic numbers in the environment. Consider one real use-case: in include/environment/ti/boot.h we have commands like these: setenv boot_part 9 part start mmc ${mmcdev} ${boot_part} boot_start part size mmc ${mmcdev} ${boot_part} boot_size mmc read ${loadaddr} ${boot_start} ${boot_size} Now suppose that we have changed the partition table and boot_part now is 10. We will need to fix commands above. And anyone who relies on these boot commands, will need to change them accordingly, too (this was an actual case in our lab while testing Linux boot on Android environment). By providing the option to pass partition name instead, we fix mentioned issue, by eliminating the necessity to use magic numbers. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-13test/py: highlight warnings in the log summaryStephen Warren3-3/+50
Currently, if a test emits a warning message but otherwise passes, there's no indication of this in the log summary, which can lead to warnings being missed. Enhance the test logic to explicitly mention warnings in otherwise passing tests, and not to collapse the log sections for tests with warnings, so that they're more easily seen when scanning the log. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2018-03-13test/py: add MMC/SD block read testStephen Warren1-0/+129
Add a standalone MMC block read test. This allows direct testing of MMC access rather than relying on doing so as a side-effect of e.g. DFU or UMS testing, which may not be enabled on all platforms. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2018-03-13disk: part: use common api to lookup part driverKever Yang1-20/+17
Do not need to scan disk every time when we get part info by name. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [trini: Fix build in !CONFIG_HAVE_BLOCK_DEVICE case] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-13disk: part: scan the disk if the part_type is unknownKever Yang1-6/+18
If a DUT do not have partition table, and we write one with 'gpt write' cmd, we should able to list the partition with 'part list' cmd. It's reasonable to scan the disk again if the initial part_type is unknown in case we just write a new one into disk. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2018-03-13mach-stm32: Use default memory map as background regionPatrice Chotard2-30/+17
On linux kernel side, on STM32F7 and STM32H7 SoCs, DMA requires uncachable regions. These regions are defined in DT. Since kernel linux v4.15, on ARMv7-M Cortex, kernel is able to configure MPU regions depending on DT settings. As kernel is able to configure MPU, this allows to remove MPU region settings in bootloader. On Cortex M processors, MPU allows to use a default memory map. (see B3.5.4 MPU Control Register, MPU_CTRL in https://developer.arm.com/products/architecture/m-profile/docs/ddi0403/latest/armv7-m-architecture-reference-manual) Use the default memory map as background region for all STM32 SoCs family with an additional MPU region corresponding to the SDRAM area. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13configs: stm32: Enable DOS_PARTITION for STM32F4/F7 boardsPatrice Chotard3-3/+1
Enable DOS_PARTITION for boards STM32F429-eval, STM32F469-disco and STM32F746-disco. This allows to read FAT partition on mmc. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13ARM: dts: Add support for stm32f746-evaluation board supportPatrice Chotard2-1/+242
This board offers: _ STM32F746NGH6 microcontroller with 1 Mbyte Flash and 320+4 Kbytes RAM _ Six 5 V power supply options: Power jack ST-LINK/V2-1 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio jack connector used to connect external speakers _ 2 Gbytes (or more) SDMMC interface microSD card _ RF-EEPROM on I2C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8Mx32 bit SDRAM, 1Mx16 bit SRAM & 8Mx16 bit Nor Flash _ 512 Mbits QuadSPI Nor Flash _ 5.7 inch 640x480 pixel TFT color LCD with capacitive touch panel _ Joystick with 4-direction control and selector _ Reset, WakeUp/Tamper or key button _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN 2.0A/B compliant connection _ Potentiometer _ Motor control connector More detailed information are available here : http://www.st.com/en/evaluation-tools/stm32746g-eval.html To compile stm32f746-eval board, use same defconfig as stm32f746-disco, the only difference is to pass "DEVICE_TREE=stm32746g-eval". Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com>
2018-03-13arch-stm32: Clean arch-stm32f7/syscfg.hPatrice Chotard1-9/+0
Remove all unused defines Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13arch-stm32: Remove stm32_periph.hPatrice Chotard3-62/+0
Remove arch/arm/include/asm/arch-stm32fx/stm32_periph.h as all defines or enums are no more used. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13arch-stm32: Factorize stm32.h for STM32F4 and F7Patrice Chotard4-57/+26
For STM32F4 and F7 SoCx family, a specific stm32.h file exists. Some common defines are duplicated or even unused in each of these stm32.h. Factorize all common definition in arch/arm/include/asm/stm32f.h and keep specific definitions in each arch/arm/include/asm/arch-stm32fx/stm32.h. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13arch-stm32: Move gpio.h for STM32 SoCs in include/asm/Patrice Chotard4-373/+118
Instead to have 3 identical gpio.h for all STM32 SoCs, migrate them in one file in include/asm. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13arch-stm32f4: Remove fmc.h filePatrice Chotard1-75/+0
fmc.h file is no more used, remove it. All FMC related defines are declared in drivers/ram/stm32_sdram.c which is common to all STM32 SoCs. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13ARM: dts: stm32: limit sdio frequency to 14Mhz for stm32f429i-evalPatrice Chotard1-0/+1
This avoids the following errors while reading on mmc: Read data bytes CRC error: 0x2 switch to partitions #0, OK mmc0 is current device Read data bytes CRC error: 0x82002 ** Unrecognized filesystem type ** Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Add DSI clock supportPatrice Chotard2-1/+2
DSI clock is available on STM32F769-disco and STM32F469-disco board. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Add set_rate for LTDC clockPatrice Chotard1-0/+100
Implement set_rate() for LTDC clock only, set_rate for other clocks will be added if needed. This is needed by future LTDC driver improvements. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Configure SAI PLL to generate LTDC pixel clockPatrice Chotard1-1/+36
Configure SAI PLL configuration to generate LTDC pixel clock on the PLLSAIR output. PLLSAI is enabled only if CONFIG_VIDEO_STM32 flag is set. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Rework SDMMC stm32_clk_get_rate() partPatrice Chotard1-31/+74
Rework the way SDMMC clock get rate is done in a more generic way : _ Add stm32_clk_get_pllsai_rate() which give the PLLSAI indicated output rate. _ Add stm32_clk_get_pllsai_vco_rate() which give the VCO internal rate. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: No more need of 48Mhz from PLL_SAIPatrice Chotard1-21/+8
Initially, 48Mhz for SDIO clock was generated from SAI pll for STM32F469 and STM32F746 SoCs, but this solution was not suitable for STM32F429 SoCs. A generic solution is to used the PLL_Q output as 48Mhz clock for all STM32F SOCs family. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Fix RCC_PLLSAICFGR mask definesPatrice Chotard1-4/+4
Use the correct name for RCC_PLLSAICFGR_PLLSAIx_MASK masks. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Fix stm32_clk_get_rate()Patrice Chotard1-5/+7
Wrong parameter was passed to stm32_clk_pll48clk_rate(). sysclk (PLL_p output value) was passed instead of VCO value. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13mmc: stm32: sdmmc2: add support for st, pin-ckinsdmmc_ckinPatrick Delaunay1-1/+6
This patch adds "st,pin-ckin" support to activate sdmmc_ckin feature. When using an external driver (a voltage switch transceiver), it's advised to select SDMMC_CKIN feedback clock input to sample the received data. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13mmc: stm32: sdmmc2: add hardware flow control supportPatrick Delaunay1-1/+2
The hardware flow control functionality is used to avoid FIFO underrun (TX mode) and overrun (RX mode) errors. The behavior is to stop SDMMC_CK during data transfer and freeze the SDMMC state machines. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13board: stm32: switch to DM STM32 timerPatrice Chotard17-365/+9
Use available DM stm32_timer driver instead of dedicated mach-stm32/stm32fx/timer.c. Remove all defines or files previously used for timer usage in arch/arm/include/asm/arch-stm32fx and in arch/arm/mach-stm32/stm32fx Enable DM STM32_TIMER for STM32F4/F7 and H7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13ARM: dts: stm32: Add timer support for STM32F7Patrice Chotard2-0/+15
Add missing timer node to enable timer5 for STM32F7 SoCs family Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32h7: Fix prescaler for Domain 3Patrice Chotard1-3/+4
d1cfgr register was used to calculate the domain 3 prescaler value instead of d3cfgr. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32h7: Fix stm32_clk_get_rate() for timerPatrice Chotard1-12/+90
For timer clock, an additional prescaler is used which was not taken into account previously. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Fix stm32_clk_get_rate() for timerPatrice Chotard2-17/+104
For timer clock, an additionnal prescaler is used which was not taken into account previously. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13timer: stm32: Add timer support for STM32 SoCs familyPatrice Chotard3-0/+146
This timer driver is using GPT Timer (General Purpose Timer) available on all STM32 SOCs family. This driver can be used on STM32F4/F7 and H7 SoCs family Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13Merge git://git.denx.de/u-boot-rockchipTom Rini14-80/+286
2018-03-13Merge branch 'next' of git://git.denx.de/u-boot-videoTom Rini9-55/+167
2018-03-13rk3288: vyasa: Add eMMC boot supportJagan Teki3-0/+22
RK3288 Vyasa has eMMC boot support, with JP4 open. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add usb otg for rk3288-vyasaJagan Teki1-0/+25
Add usb otg support for rk3288-vyasa, board support usb1 otg power through otg_vbus_drv and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add usb host for rk3288-vyasaJagan Teki1-0/+48
Add usb host support for rk3288-vyasa, board support hub power through phy_pwr_en and usb2 host power through usb2_pwr_en and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: rk3288-vyasa: defconfig: Enable gmac supportJagan Teki1-0/+3
Enable gmac support for rk3288-vyasa board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add gmac support for rk3288-vyasa boardJagan Teki1-0/+41
Sync gmac dts node from Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add regulators for rk3288-vyasaJagan Teki1-0/+40
Add supporting regulators for rk3288-vyasa board, dc12_vbat is parent regulatorand followed regulators as are child regulators. regulator naming conversion followed as per schematic for better readability and easy for identification. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMICJagan Teki1-20/+2
rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd, so use the same by renaming vcc33_sd to vcc_sd(as per schematic) and drop explicit regulator definition from root. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1Jagan Teki1-2/+2
vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so remove the same and update the regulator-name as 'vdd_arm' to sync with existing rk3288 board dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Sync rk3288-vyasa dts from LinuxJagan Teki3-60/+105
Sync rk3288-vyasa board dts from Linux for proper updates and maintenance - rk3288-vyasa.dts: Similar to Linux dts - rk3288-vyasa-u-boot.dtsi: u-boot dts changes Also updated MAINTAINERS for these dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: add text_offset to kernel_addr_r on aarch64 platformsKlaus Goger2-2/+2
Booting a aarch64 Linux kernel requires the image to be placed text_offset bytes from a 2MB aligned address. See https://www.kernel.org/doc/Documentation/arm64/booting.txt booti_setup() takes care about this alignment and will relocate the image if not properly aligned with memmove(). This can require up to double the size of the loaded image and therefore accidentally overwrite content placed there (i.e ramdisk_addr_r) for large kernel images. By adding text_offset to the default kernel_addr_r we can prevent that from happening for kernels larger 18MB and also save a few cycles. We can assume a text_offset of 0x80000 for most cases, all others will be handled by booti_setup() anyway. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: pwm: convert to use live dtKever Yang1-1/+1
use live dt api to get base addr Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk1108: convert to use live dtKever Yang1-1/+1
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3328: convert to use live dtKever Yang1-1/+1
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3288: convert to use live dtKever Yang1-1/+1
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk322x: convert to use live dtKever Yang1-1/+1
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3188: convert to use live dtKever Yang1-1/+1
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3036: convert to use live dtKever Yang1-1/+1
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13Prepare v2018.03v2018.03Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 16:22:05 +0000