summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-05dm: i2c: Add a note to I2C drivers which need conversionSimon Glass14-0/+42
Maintainers need to be notified more directly of the need to convert these drivers. Add a note to the top each affected file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05samsung: i2c: Split the high-speed I2C code into a new driverSimon Glass4-545/+591
Now that driver model is used for I2C on all boards, we can split the high-speed code into its own driver. There is virtually no common code, and this significantly reduces confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05samsung: i2c: Drop old code from I2C driverSimon Glass1-583/+2
Now that all boards use DM_I2C we can drop the old code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05arm: samsung: Convert s5p_goni and smdkc100 to DM_I2CSimon Glass3-20/+7
These are the last two samsung boards that don't use DM_I2C. Move them over, leaving #ifdefs to allow the maintainer to complete this work. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05arm: exynos: i2c: Convert exynos boards to use DM_I2CSimon Glass9-94/+54
Three boards are still not converting to use DM_I2C. They are also using the old PMIC framework. Rather than removing them, add #ifdefs to allow them to continue to build. This will give the maintainers a little more time to decide whether to convert them or not. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2016-12-04Merge git://git.denx.de/u-boot-mpc85xxTom Rini107-227/+276
2016-12-04defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASHVignesh R2-0/+4
Commit 4c4e3b37750f3("ARM: AM43xx: Enable FIT") accidentally disabled DM_SPI and DM_SPI_FLASH. Add back DM_SPI and DM_SPI_FLASH to am43xx_evm_defconfig in order to make use of DM framework for QSPI. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-12-04common: image: Remove FIT header update from image post-processingAndrew F. Davis1-23/+6
After an image is selected out of a FIT blob for further processing we run an optional, platform specific, post-processing function on this component. This post-processing may modify the position and size of the image, so after post-processing we update the location and size for this image in the FIT header. This can cause problems as the position of subsequent components in the FIT blob are only referenced by relative position to the end of the last component. When we resize or move a component the following components position will be calculated incorrectly. To fix this, we do not update the FIT header but instead only update our local understanding of the image data. This also allows us to re-run post-processing steps if needed. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Carlos Hernandez <ceh@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-12-04usb: gadget: remove unused shortname variableAndre Przywara1-1/+0
The shortname variable isn't referenced anywhere in the code, so just remove it. Pointed out by a GCC 6.2 default warning option. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-12-04davinci: da8xxevm: fix indentationAndre Przywara1-2/+2
Apparently the indentation is wrong in this case, as the second message should be printed indepdently of the if statement. Fix this indentation to avoid both compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-12-04usb: eth: r8152_fw: fix indentationAndre Przywara1-4/+4
Apparently the indentation is wrong here, fix this to avoid compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-04marvell: comphy_a3700: fix bitmaskAndre Przywara1-2/+2
Obviously the mask for the rx and tx select field cannot be right, as it would overlap in one and exceed the 32-bit register in the other case. From looking at the neighbouring bits it looks like the mask should be really 4 bits wide instead of 8. Pointed out by a GCC 6.2 (default) warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2016-12-04net: rtl8169: remove unneeded definitionAndre Przywara1-3/+0
The rtl8169_intr_mask variable isn't used anywhere in the code, so just remove it to avoid a GCC 6.2 compiler warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-04net: e1000: fix indentationAndre Przywara1-3/+2
Apparently the indentation is off here, for the IGB model just want to bail out early. Fix this to avoid both compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-04mtd: cfi_flash: fix indentationAndre Przywara1-2/+2
The indentation is misleading here and suggests that the write command will be only executed in the else clause. It seems like this is not intended, so fix the indentation to avoid both compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stefan Roese <sr@denx.de>
2016-12-04serial: Drop the s3c24x0 serial driverSimon Glass4-211/+0
This is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-04arm: Remove VCMA9 boardSimon Glass12-1139/+0
This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-04arm: Remove smdk2410 boardSimon Glass9-520/+0
This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch>
2016-12-04serial: Update docs to indicate mcfuart supports DM_SERIALSimon Glass1-1/+0
This driver was converted so we should remove it from the list. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-04post: cosmetic: fix typoNiko Mauno1-1/+1
Change 'date' to 'data'. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
2016-12-04Cosmetic api: api_storage.c Spelling correctionWalt Feasel1-1/+1
Make spelling correction for 'from' Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
2016-12-04Cosmetic api: api_storage.c Comment styleWalt Feasel1-15/+17
Make comment style modifications Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
2016-12-04Cosmetic api: api_storage.c Line over 80 charWalt Feasel1-1/+1
Make checkpatch style modification for WARNING: line over 80 characters Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
2016-12-04Cosmetic api: api_storage.c Blank line after {Walt Feasel1-3/+0
Make checkpatch style modification for CHECK: Blank lines aren't necessary after an open brace '{' Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
2016-12-04Cosmetic api: api_storage.c Align parenthesisWalt Feasel1-1/+1
Make checkpatch style modification for CHECK: Alignment should match open parenthesis Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
2016-12-04ti_armv7_common: env: Increase IO buffer sizeLokesh Vutla1-1/+1
There are certain environment variables whose length is greater than the defined IO buffer size. So, increase the IO buffer size to print the entire variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: dts: AM571x-IDK Initial SupportSchuyler Patton4-2/+86
Add initial DTS support for AM571-IDK evm. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: am57xx: Add support for the am571x idkSteve Kipisz3-3/+286
The AM571x Industrial Development Kit (IDK) is a board based on TI's AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This board is a development platform for the Industrial Market with: - 1GB of DDR3L - Dual 1Gbps Ethernet - HDMI - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The PRU/ICSS will be supported by 3rd party software for EtherCat, Profibus, and other Industrial protocols. The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5718 Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: am572x-idk: Update pinmux using latest PMTLokesh Vutla1-215/+221
Update the board pinmux for AM572x-IDK board using latest PMT[1] and the board files named am572x_idk_v1p3b_sr2p0 that were autogenerated on 20th October, 2016 by "Steve Kipisz <s-kipisz2@ti.com>" and "Tom Johnson <thjohnson@ti.com>". [1] https://dev.ti.com/pinmux/app.html#/default/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: am572x: Add pinmux for X15/GPEVM SR2.0 using latest PMTNishanth Menon3-138/+261
Update the board pinmux for AM572x-IDK board using latest PMT[1] and the board files named am572x_gp_evm_A3a_sr2p0 that were autogenerated on 19th October, 2016 by "Ahmad Rashed<a-rashed@ti.com>". [1] https://dev.ti.com/pinmux/app.html#/default/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: am57xx: Update SR1.1 RGMII0 iodelay timings for x15/GPEVMNishanth Menon1-5/+5
Update the timing for RGMII0 interface based on PCT_DRA75x_DRA74x_SR1.1_v1.3.10 version (Jan 2016). This update is for SR1.1 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: am57xx: Add support for detection of X15 revb1Lokesh Vutla3-8/+22
BeagleBoard-X15 Rev B1 with SR1.1 platform have incompatible changes for HDMI GPIO requiring new dtb support. This implies we have to properly identify the platform now as well. Hence provide a different board name for the Rev B1 variants. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: am57xx: Add support for detection of reva3 variations for GPEVMNishanth Menon2-5/+14
AM57xx evm Rev A3 with SR2.0 platform have incompatible changes for HDMI GPIO requiring new dtb support. This implies we have to properly identify the platform now as well. Hence provide a different board name for the Rev A3 variations. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: dts: am57xx: sync DT with latest LinuxLokesh Vutla8-703/+703
Sync all am57xx based dts files with latest Linux Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04configs: dra7xx: Enable lp873x optionsKeerthy2-0/+6
DRA71-evm uses LP873x regulator. Enable lp873x PMIC config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04configs: dra7xx: Enable pmic/regulator optionsLokesh Vutla2-0/+5
Enable pmic/regulator config options. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04configs: dra7xx: hs: Enable DM_ETHLokesh Vutla1-0/+1
Enable DM_ETH for hs boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04configs: ti_omap5_common: Select dtb name for dra71xNishanth Menon1-0/+2
Select dtb name for dra71x-evm. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: dts: dra71x-evm: Add DT supportLokesh Vutla5-4/+237
Add DT support for dra71-evm and built it as part of FIT image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: dts: dra7xx: sync DT with latest LinuxLokesh Vutla11-640/+1683
Sync all dra7xx based dts files with latest Linux Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: OMAP4+: Add support for getting pbias info from boardLokesh Vutla6-48/+82
Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based boards to enable mmc regulator. This is not true always like in case of DRA71x-evm. So get this information based on the board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: dra71x-evm: Add PMIC supportKeerthy4-0/+77
Add the pmic_data for LP873x PMIC which is used to power up dra71x-evm. Note: As per the DM[1] DRA71x supports only OP_NOM. So, updating the efuse registers only to use OPP_NOM irrespective of any CONFIG_DRA7_<VOLT>_OPP_{NOM,od,high} is defined. [1] http://www.ti.com/product/DRA718/technicaldocuments Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: dra72: Introduce optimization for rgmii timing for rev CNishanth Menon1-25/+50
Rev C version of EVM does require IODelay to be configured for RGMII pins in MANUAL_1 configuration. Update the same based on PG2.0 initial simulation values. Data based on PCT_DRA72x_SR2.0_SR1.0_v1.3.0.7 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: dra71x-evm: Add mux settingsLokesh Vutla2-1/+206
Add mux and iodelay settings for dra71x-evm. Data generated using PCT_DRA71x_SR2.0_v1.0.0.0 version (June 2016). Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04board: ti: dra71x-evm: Add epprom supportLokesh Vutla1-0/+5
The dra71x-evm is a board based on TI's DRA718 processor targeting BOM-optimized entry infotainment systems such as display audio and is a software compatible derivative of the highly successful DRA74 and DRA72 processor families. More information can be found here[1]. Add epprom detection for dra71-evm. [1] http://www.ti.com/product/dra718 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPPSuman Anna1-0/+136
This patch adds support to update the device-tree blob to adjust the DSP and IVA DPLL clocks pertinent to the selected OPP choice, with the default being OPP_NOM. The voltage settings are done in u-boot, but the actual clock configuration itself is done in kernel because of the following reasons: 1. SoC definition constraints us to NOT to do dynamic voltage scaling ever after the initial avs0 setting in bootloader - so the voltage must be set in bootloader. 2. The voltage level must be set even if the IP blocks like GPU/DSP are unused. 3. The IVA, GPU and DSP DPLLs are not essential for u-boot functionality, and similar DPLL clock configuration code has been cleaned up in v2014.10 u-boot release. See commit, 02c41535b6a4 ("ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL"). The non-essential DPLLs are configured within the kernel during the clock init step when parsing the device tree and creating the clock devices. This approach meets both the u-boot and kernel needs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Subhajit Paul <subhajit_paul@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: DRA7: Redefine voltage and efuse macros per OPP using KconfigSuman Anna2-13/+127
Redefine the macros used to define the voltage values and the efuse register offsets based on OPP for all the voltage domains. This is done using Kconfig macros that can be set in a defconfig or selected during a config step. This allows a voltage domain to be configured/set to a corresponding voltage value depending on the OPP selection choice. The Kconfig choices have been added for MPU, DSPEVE, IVA and GPU voltage domains, with the MPU domain restricted to OPP_NOM. The OPP_OD and OPP_HIGH options will be added when the support for configuring the MPU clock frequency is added. The clock configuration for other voltage domains is out of scope in u-boot code. The CORE voltage domain does not have separate voltage values and efuse register offset at different OPPs, while the MPU voltage domain only has different efuse register offsets for different OPPs, but uses the same voltage value. Any different choices of OPPs for voltage domains on common ganged-rails is automatically taken care to select the corresponding highest OPP voltage value. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04ARM: OMAP4+: Add support for dynamically selecting OPPsLokesh Vutla6-104/+254
It can be expected that different paper spins of a SoC can have different definitions for OPP and can have their own constraints on the boot up OPP for each voltage rail. In order to have this flexibility, add support for dynamically selecting the OPP voltage based on the board to handle any such exceptions. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04omap4_sdp4430: Disable SPL_OS_BOOTTom Rini1-1/+0
We are tight on space on this board so drop SPL_OS_BOOT Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-04powerpc: mpc86xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig optionYork Sun3-13/+6
Use Kconfig instead of defining this macro in header file. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 07:33:34 +0000